Access to the DD040002 address violation. Read of address DD040002 WUSB54GS



Tags: Linksys Adapters

Similar Questions

  • do not have access to the hex address

    I am trying to install nokia Pc suite, it keeps telling me that I don't have access to the HEX address, I am the administrator HELP

    http://www.Nokia.com.au/get-support-and-software/download-software/Nokia-PC-suites

    Read the info above about it.

    See you soon.

    Mick Murphy - Microsoft partner

  • Access denied: the IP address of this computer host is not on the list of eligible access of the target.

    Hi all:

    I was working normally with my NI9024 CRIO to my work. I went home and when I came back the other day. I tried to compile my application to work.

    The surprise was that I got a strange message "access denied: the IP address of this computer host is not on the list of eligible access of the target."  Now, I can not connect a CRIO device. I tried to reset all the IP addresses in the CRIO and my PC computer. What can I do?.

    Yes. This is the solution. I had to uninstall the NOR-RIO software on the target. I have uninstall everything on the CRIO. Then I reinstall the software, but I had also to program the fpga, the host and target. And I also have my IP, on the measure and automatition software. I found a big bug I guess.

    Thanks anyway. National Instrument of love. Hope to work there one day.

  • Windows Live ID account compromised. Do not have access to the email address there at - it another way to verify my account?

    First of all, my hotmail account has been hacked.  When asked to verify my account my e-mail is an old e-mail account that I no longer have access to.

    I am able to change my password and connect, but may not have passed the first page.

    Now, my account was closed and I contacted the support (13 March) and received a ticket support number but have not received anything back (March 15).

    There is anything I can do to get my active account even once, as I have a lot of important information in my Inbox that I need to get access to as soon as possible.

    Any help would be appreciated.

    Thank you very much

    Submit queries from Hotmail on the forum right here:

    Windows Live Solution Center
    http://windowslivehelp.com/

  • Smartphones blackBerry BB Messenger is no access to the main address book

    BB Messenger, I would like to add a contact.  In unrolling menu select Add a contact.  My main contact address book does not appear.  It makes me hand typing an address number or PIN!  How to make Messenger to recognise my primary address book?

    Thanks for the tips... but typing doesn't work anymore.  I ended up reinstalling the aall software is in place and running.

    Thank you

  • Restrict access to the IP address and the Application

    Hello

    I have a problem with the application of database access. I want to limit the users using Toad. I want users to use only their application, not of Toad. But as a s/n, I still need Toad. I do like this limitation?

    CMIIW.

    Thank you and best regards,

    Wiwin, ST, OCP.

    Wiwin,

    If you want to try to make decisions about access based on the application used to establish the connection, you can look into some of the attributes sys_context and see if there is something that could work.  However, there is no guarantee that a given attribute is populated and precise.  And, as Andy, it would be possible for a user to usurp a request for his client if he can change the name of the executable file, or even to change the attributes with the DBMS_APPLICATION_INFO package or OIC.

    Here's a query that can help you research how a tool or a given application is filling these attributes.  First connection with the tool you want to analyze, for example, TOAD.  Then, run this query.  It covers two sys_context attributes that I will be dedicated to implement an application 'fingerprint': MODULE and CLIENT_INFO.  If this does not work, you can try substituting one or several other attributes listed under the function description SYS_CONTEXT in the SQL reference manual .

    Select

    "CLIENT_INFO: ' | '. "sys_context (' USERENV', 'CLIENT_INFO' ') |

    MODULE: '. sys_context (' USERENV', 'MODULE' ') "SYS_CONTEXT Data".

    Double;

    If you find a 'fingerprint' that you think that you can use, you can try that integrate your logon trigger.  However, I would exercise extreme caution due to aforementioned unreliability of these attributes.  Do a lot of testing!  Or better yet, try the recommendation of Andrew; It cannot take more time to use the application role he suggests that it would for enough to code and test a change of logon trigger, and it makes a better job of dealing with the risks.

  • Reading to the client the IP address in the web service RESTfull

    It is possible to read the address IP of the client accesses a RESTfull built in BT webservice? For example, you might want to identify users of local IP addresses and different information.

    InfiniteNothing,

    Allright, I think I found something.

    Among the Web Wervices screws, there is a VI called Variable read request. One of the variables you can read is a remote address, and I think this will give you the IP address. To use these screws, you will need to use the broadcast method get data instead of reading terminals (as in the example).

    I hope this helps!

  • The user read/write register access to the network folder/drive. Some users unable to save or write to the directories.

    I have three users who have no problem with read/write & record readers records secure network access. I have two users who can read some files and save in some files, but cannot save or access certain folders even after receiving full access read/write for all files in the network drive. Help, please. The computers running Vista Ultimate and server access to Windows Server 2003. Thanks for your times * address email is removed from the privacy *.

    Problems related to access to the files on a server networked in a business environment are a produce little for Windows answers Forum.  I recommend you repost the question either in the Technet Forum to the:http://social.technet.microsoft.com/Forums/en-us/winserverfiles/threads orhttp://social.technet.microsoft.com/Forums/en-us/itprovistanetworking/threads.

    I don't know that someone there can help you.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • My Windows 7 PC does not access the internet and the IP Address of the local router

    My desktop PC gets internet access. She also cannot access my router (via IP address), although it shows a connection to the router in the network and sharing (correct network name) Center. The administration of the router shows in turn as connected desktop pc.

    I tried the following:
    -Restart the PC several times - no change
    -Reset my cable modem and router - no change
    -try to connect by using a wifi adapter - no connection
    -Try the windows network diagnostics - first "DNS server is not responding", now "broadband modem is known of connectivity issues.
    -use the same cable and port on the router with my laptop (also windows 7)-internet access works
    -internet access with my laptop via wifi - works
    -internet access with my mobile android (wifi) - works
    -check the settings of the router (my laptop has access) - everything is OK

    The problem must be in the system Windows 7 from my desktop PC.

    I hope you can help!

    P.S. I rebooted in "safe mode with network" and now got access to the internet. I just read about a problem with McAfee products and now running McAfee Virtual technician to see if it helps.

    P.P.S. McAfee virtual technician several questions and some of them, now, I have access to the internet (yay!), now upgrade from McAfee and hoping for the best.

    PPPS problem solved.
    Solution (was http://service.mcafee.com/FAQDocument.aspx?id=TS101446):
    -Restart the computer in safe mode with networking
    -go to mvt.mcafee.com and install McAfee Virtual Technician
    -run and repair
    -Restart
    -updating McAfee
    -run again the MVT (no problem found)

    You have McAfee? McAfee has been updated at the same time as the last batch of updates from Windows 7 and this is the cause of problems of internet connection for most, if not all, users of McAfee.

    See the communication from this "criticism" - McAfee

    Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

    You should make the fix McAfee, if necessary. There are corresponding communications for their enterprise products.

    I had to run the removal of McAfee Development tool a few times before and it caused a problem with the license if the PC was not connected to the internet during the abduction. Due cat of McAfee support reset their files in order to allow the relocation-reactivation. Here is their link cat - McAfee - media contains the link to the cat

  • How can I prevent users from access to my hard drive from backup to the enclosed address?

    I have a HD attached used only for backup. When I change the guest user attached the HD content is accessible. I tried to change the permissions for the disk 'all', using the information, 'no access' window (without blocking) that seemed to make the case, but a quick search gave terrible warnings about changing permissions, so I came back to the unsatisfactory "read only". Change return 'each' to 'No access' would be a bad move.  If so what can restrict the guest access to the HD (besides of course the disconnection of the latter!) attached.

    You can encrypt the back upward, then it will be password protected.

    http://osxdaily.com/2012/09/17/how-to-encrypt-an-external-drive-quickly-in-Mac-o s-x.

  • Allow access to the USB Reader under account 'user '.

    Hello world

    Need help to allow access to the usb ports so that users can use a card reader to download stuff on a web application, we have.

    The great way would be able to push on HP device Manager (I v4.5) and Thin Clients are T610 running WES7

    Any help is appreciated.

    See you soon,.

    The local user account is configured to restrict access to the Z:\ only through NoDrives policy.  See http://technet.microsoft.com/en-us/library/cc938267.aspx for more details.

    To make life easier, there are calculators that you can use to determine what should be this entry of 32 bits, based on drive letters you want hidden.  An example is http://www.wisdombay.com/hidedrive/index.php.  The default value for Z:\ is only 0x01ffffff (33554431).

  • Why is the largest part of the URL, with the exception of the domain name, in cast iron? It is difficult to read. I would like to make the entire address in black police

    Screenshot of the behavior

    Before that I've upgraded to Firefox 6.0, the URL was displayed in black text.

    After the upgrade, it is now showing only the main domain name ( mozilla.com, for example) in the text in black, so that any additional text (like, https://support.) is grayed out.

    It is very difficult to read this gray text on my monitor. I would like to make sure the full address is displayed in black text, but I couldn't find any type of configuration setting under Options to change that.

    Please let me know if I can change the display of the URLS back to black.

    This is a new feature in Firefox to highlight the domain in the URL bar. You can change a preference to do the full URL darkness.

    Change a preference:

    1. type of topic: config in the location/URL bar and press ENTER.
    2. If you see a warning, accept (promise to be careful)
    3. Filter: browser.urlbar.formatting.enabled
    4. in the lower panel, double click on this item to toggle the value false

    I don't know if yes or no you must restart Firefox after doing the above to have the change take effect. Test, and if it does not, then restart Firefox and test again.

    If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

    Not related to your question, but...

    You must update some plug-ins:

  • Upgrade to El Capitan without access to the main Apple ID email address

    My girlfriend has upgraded its MacBook Pro 13 inch (2009) for OS X El Capitan 10.11.2 without access to its primary email id apple address. When she tried to log on after restart, as she was sent a verification message to her old email address which she doesn't have access, and I don't seem to be able to point to a new e-mail address, I'm guessing that for reasons of security. She knows the password to his apple ID and created a new apple ID, but she cannot connect to icloud and can not access to its files, photos and work of the University. And no, there is no going back upward.

    Is it possible that it could access its files do not have access to the old email address? She is not precious on the original apple, ID she wants fair access to its things that apparently is not authorized to access.

    Thank you

    James

    Have her contact iTunes to regain the use of the original account

    Contact iTunes Support

    Then she can change contact email address.

    Purchases are locked the account than them, inducing update OSX bought and accounts cannot be merged

  • How can I access my windows live account, the email address it was registed in the I no longer use due to his being pirate

    I am trying to access my windows live account but he sends my password reset to an email address I no longer use or have access to the address.  I filled the information and sent to the soultions.  I'm changing my x - box phase identification to another account.

    Hello

    The question you have posted is related to Windows Live Mail and would be better suited in the Windows Live Solution Center.

    Please visit the link below to find a community that will support what ask you

    http://www.windowslivehelp.com/forums.aspx?ProductID=15

    Hope this information helps.

  • Does anyone has a software that can give the ip address for any device connected to the laptop, as the Council of access control?

    Hello team,

    Does anyone has a software that can give the ip address for any device connected to the laptop, as the Council of access control?

    Thanks for help

    LookAtLAN network monitoring is one of these tools.

    SuperScan is probably better, but I have not tried.

Maybe you are looking for