Access to the drive of continuous or sampling

Similar Questions

• How to restrict access to the drive of Wndows xp sp3?

  I have 3 user account on my computer, it is has the administrator rights and the other is a standard user account.

  I want to restrict access to all readers for the standard player.
  I used gpedit.msc to enable the administrative model, but it also limits the account admin and me to access the road
  OS: windows XP SP3
  Please advice
  Hi Utkarsh.Ranjan,
   
  If you want to restrict access to a drive by using the Group Policy Editor, you can not apply for a particular user account. This will change for the user accounts.
   
  You can't restrict access to the complete transmission. However, you can resrtict access to folders and files inside a car to a particular user.
   
  Refer to the section "set, view, change, or remove special permissions for files and folders" in the following article and follow the steps to remove the authorization of the user access to the file/folder.
  How to set, view, change, or remove special permissions for files and folders in Windows XP

• W7 UAC & local security policy blocks the access of the drive to install W7

  The UAC setting is blocking access to the W7 installation disc and reports error Code: Ux80070005; Retail "user access is denied."
  because ir requires elevated privileges to run W7.  However, I'm already under W7 with administrative privileges at level 2.
  When Windows is running.  When I stop and restart my computer after I insert the W7 disk in the CD/DVD slot, it starts
  in the W7 disk and I get three icons on graphical interface at startup.  1 HD Windows, window OS W7 and Windows EFI boot disk.  Thus,.
  while I can run W7 in OS mode and startup in W7 Installation disc & Windows 7 EFI before starting the system, I can't
  disk access to Installation of W7 after I start OS W7.  Other that this issue, Windows Diagnostic reports no problem with W7
  components or other after market seller software which would explain the problem of registry. My reading of the Forum
  Comments on the problems of the UAC and "Windows 7 Inside and Out" makes me think it's a problem of UAC setting and synchronize with
  Who is not grateful, local security policy setting of the UAC.  I don't want to mess with the registry setting without knowing why.

  Forum assistance requested.  Help, please.

  Hey Herbert,

  1. you try to reinstall Windows 7?

  2. you try to perform a custom installation or a Windows 7 upgrade installation?

  3. why you reinstall Windows 7?

  Please see the link to disable the UAC.

  Enable or disable the User Account Control

  http://Windows.Microsoft.com/en-in/Windows7/turn-user-account-control-on-or-off

  Please post with more information on this issue to get help.

• Why the drive to continue working without interruption when firefox works

  Hard drive are permanently being exploited so that firefox is running. The racket stops when firefox closes.

  You may have a faulty extension or malware. Follow these steps:

  • Troubleshoot your extensions and themes
  • Search for malware

• System and security missing in Control Panel and also not able to decrypt the drive

  Original title: System and security

  i is not system and security link in my control panel and I want to decrypt the drive I encrypted earlier, what I do now, please help

  Hello

  To suspend BitLocker Drive encryption on a drive
  a. Click Start, click Control Panel, click System and security and then click BitLocker Drive encryption.
  b. click on suspend Protection for the reader.
  c. a message appears, informing you that your data will not be protected by BitLocker is suspended and asking if you want to suspend BitLocker Drive encryption. Click Yes to continue and suspend BitLocker on the drive.
  By performing this procedure, you have suspended BitLocker protection on the disk by changing the decryption for the BACKSPACE key key. To read data from the drive, the clear key is used to access the files. When BitLocker is suspended, secure the TPM validation does not place and other authentication methods, such as the use of a PIN or USB key to unlock the operating system drive, are not applied. This allows you to make changes such as upgrading system BIOS or replacing a data drive. When you have finished your changes to the computer, click RESUME Protection in the BitLocker Drive Encryption to start Control Panel item to use BitLocker Drive Encryption again.
  To turn off BitLocker Drive encryption
  a. Click Start, click Control Panel, click System and security and then click BitLocker Drive encryption.
  b. find the drive on which you want BitLocker Drive Encryption is disabled and click enable disable BitLocker.
  c. a message appears, informing you that the drive is decrypted, and this decryption may take a long time. Click on deciphering the drive to continue and turn off BitLocker on the drive.

  More information: http://TechNet.Microsoft.com/en-us/library/ee424315 (WS.10) .aspx

  I hope this helps.

• Why is my lack of training:, but the drive is listed in the devices/hardware Manager

  OS Windows XP Pro, two identical computers both with USB 2.0.  The Freecom 250 GB external hard drive USB comes and works ok on one but not on the second PC.  Its icon appear briefly in 'My computer', but disappeared when I tried to access.     The drive appears in "Device Manager" under "drives" like Samsung HM 250JI USB Device. "  He was also listed as a USB Mass Storage Device in 'Remove hardware safely' but no drive letter.

  I have re-formatted the USB key as a drive on the first computer, one also made by error-checking complete to include repair and defragmentation, whereupon I transferred the drive to the second computer, but without success.   Maybe I should give up just the drive because I have a very good IOMEGA USB drive.

  I would be grateful for any advice.

  Richard Steiert.

  Hi Richard,

  Try the following.

  Method 1: Run the Fixit tool in the following article.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

  
  Method 2: update the computer with the latest chipset drivers and also any other device drivers. Log computer manufacturer site to do so.

• Update Atheros Driver for "Local access" only the wireless. HP G60 laptop

  Hello

  Loads of reading on the internet about this Vista Local Access Only. Recently moved property and now guess what this PC cannot connect via wireless, never made any other device.

  Tried to configure IPv4 only etc, still have questions.

  Is there a link to check the latest version of the driver for the laptop computer help section, HP doesn't seem to make it easy to locate and download?

  Thank you

  Dan.

  Hi Paul,.

  Thanks for the link... Hard to find this driver on the HP website no such direct link!

  I continued to research on the web and found similar version driver.

  Product: Atheros AR5007 802. 11 b / g WiFi adapt
  Class material: Net
  OS: Windows Vista 32-Bit
  Version: 9.2.0.480
  The driver date: 10/01/2012

  Immediately huge, up and running.

  Of course the driver via rlink will allow you to correct excatly the same as...

  Thanks again for the response...

• I have a drive mapped to the network, but the icon is located in a folder. I get access denied when I click on the drive.

  I have a drive mapped to the network, but (My Computer) icon is a folder. I get access denied when I click on the drive. But if I open windows Explorer, I can access the drive mapped without problems. Win Xp

  original title: mapped drive error.

  Hello

  Make sure that the mapped drive is configured to share and works on part.

  Auto-mappage will not work if there is a problem with sharing.

  Maybe this can help.

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq#trusted

  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP -http://support.microsoft.com/kb/875357

  In Win XP pro you can visually see the setting of authorization/security and configure them according to your preferences.

  http://www.Microsoft.com/windowsxp/using/security/learnmore/AccessControl.mspx#securityTab

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

• No access to the DVD drive - 38 error code

  Update Driver published 07/07/08 to 23:59 has been installed on my system as made by Toshiba Tempo but rebooting my machine, I get error 38 (according to Vista) that prevents the new driver installation as the old pilot is resident in memory... ?? Effectively, this means that I can't access or see my DVD player more in other ways than in the page Manager devices Control Panel. Option driver restore is not available, perhaps because it was an update of the firmware. The message on the device properties page is as follows:

  Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38)

  The installed updatre was frmwre-20080707134447. It includes an Adobe document that tells you what to do and how to ensure that your drive needs to be refreshed, which was easy to follow and loose my machine.

  I tried to uninstall the device and the driver, but whenever I have to reload the same error occurs.

  I'm really impressed and quite embarrassed, because it is a recommended Toshiba firmware update done using their system of Tempo, ideas or advice welcome.

  Thank you

  Matt

  Hello

  Do you see a CD/DVD drive in Device Manager?
  If so, then remove it from the list of devices.

  Then access the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Finally restart the laptop and check if the CD/DVD drive would still be functions

  Further details can be found here:
  http://support.Microsoft.com/kb/270008/en-us

• Satellite L750 - access to the HARD drive recovery partition

  I need to reset the drive to factory settings, but can not access the recovery starts. I read the manuals

  http://APS2.toshiba-tro.de/KB0/HTD1303440001R01.htm
  http://APS2.toshiba-tro.de/KB0/HTD16036F0000R01.htm

  This information do not work for me. This utility, I did not at all.

  My serial number 7b421068w L750

  I tried to run the recovery partition, I disable for laptop and lit keyboard '0' key and tried other keys F1 - F12, but system just beep with a blank black screen and then Toshiba displays menu and the Windows loading as usual.

  He has a record of factory "HDDRecovery" on the logical drive D: with all default recovery files

  Post edited by: clients

  Missing a very important information: preinstalled OS the original that you have with your laptop or you have installed a clean version of Windows?

  When you buy the new book it comes with factory settings. If long your laptop has this plant, you will be able to install the recovery image according to instructions with F8 at startup. If you change something that it will no longer work (install own os, partition structure).

  In this case you must use the created recovery disc but I assume you didn't create one although it is clearly described in the document s user manuals.

  Problem is that you can't do much. Either it works or not. If there is no way to install image recovery I'm afraid you need to order the new Mr. recovery disk you can do it on https://backupmedia.toshiba.eu/landing.aspx

• Tecra M11 has a trap door for access to the hard drive?

  Can someone tell me if the Tecra M11 is equipped with a door to provide access to the hard drive?

  Previous Tecras have such a door, but I can't say for some photos of the site Web or the M11 manual if this still applies. I need to know before ordering.

  Thanks in advance for any help.

  Hello

  I put t know what you mean exactly. hatch giving access to the disk hard but the notebooks THAT HDD is placed at the bottom of the unit.
  You can easily remove the cover that secures the HARD drive Bay to get access to the internal HARD drive

  Welcome them

• Access to the library of the user on the backup drive

  I need to access my preferences of old logic disk clone.  I know that if I worked this system I would just press option/GB and I could access the user library but I try to access to the outside, the last time I tried to restart from that clone drive it wouldn't work.

  Open the copy in your folder on this drive, choose go to folder from the Finder menu and provide exactly the library as the path.

  (139232)

• How can I allow one of my children to use local applications, while temporarily blocking his access to the Internet and while allowing children to continue to access the Internet?

  I have three children who have separate user accounts on our two computers. Both computers running Windows 7 Home Premium edition. We use Windows Live Family Safety on each computer to our parental controls for defining when and what each child can access. We used the period of parental control feature to block every child signed to computers, except when we allow. (It would be nice if we could block a computer and allow them to use the other.)

  However, I can't find a way to allow a child to not use the computer for local activities (for example, Microsoft Word), while blocking its access to the Internet. I also want to allow his brothers to continue to use the Internet during this time.

  Any help would be appreciated. Thank you.

  Hello

  Windows parental control have no option to directly block access to the internet in a Windows user account, because the system needs to provide activity reports. To work around the problem, you can block all internet browsers available for this user account so that the child have no way to access the internet. Restriction of the app to access the control that installed programs on the computer children.  Here are the detailed steps to block some apps:

  1. on any computer, log on to the parent account for http://fss.live.com

  2. click Edit settings under the name of the child you want to change the settings and then click the App restrictions.

  3. check the circle next to turn on the restrictions of the app.

  4. check all programs related to access to the internet or type the application in the area of Search apps .

  5. check the box next to the application or the program once it appears in the list.

  6. click on Save.

  This settings apply only to that specific user account. If you have any other questions, please let us know.

  Thank you!

• Why the system operating to deny access to the file specified to run wipe Drive 5

  Why deny operating system access to the specified file for execution unit 5 Wipe to wipe my hard drive, I need permission.

  Hi JoyceScott,

  ·         What is the operating system installed on the computer?

  If you receive no error message indicating that access is denied, take the permissions on the drive and check if it helps.

  a. right click on the external hard drive, and then select Properties.

  b. click on the Security tab, select the user name and click on modify.

  c. now, click Add and type the user name that you want to grant permissions to sub enter the names of the objects to select, and then click on check names. Click OK.

  d. now, select the user name you typed in group or user names and check full control under the terms of the authorization for.

  e. click on apply and OK. Check whether the problem exists.

  For more information, visit: What are the permissions?

• To install the device driver required to access your hard drive, insert the installation media containing the driver files, then click OK."

  I'm trying to move from xp to windows 7. I spent all the requirement but she says to install the device driver required to access your hard drive, insert the installation media containing the driver files and then click OK. "what should I do? Where can I find the driver?

  Guess he would seek software/drivers for the chipset MB

  & sata/IDE controller software. Get the MB hardware specifications, go to the mfg

  Web site & download the software and drivers. If intel, download the chipset installation

  utility & install it 1. The other would be the SATA or / and drivers for the MB IDE

  controllers, 'Matrix Storage console' would be the one, also chk for desktop

  Internet downloads, amd, and other brand materials would be substantially the same.