Accessori per it modulo NI 9234

Similar Questions

• NEITHER 9234

  Maximum sampling frequency for the NI 9234 is given as 51.2 kech. / s in documentation NOR. This means that for a House to measure collection measures of 3 different instruments rate is 51.2 kiloSample/second/3 = 17 kiloSample/second. It's 17 000 samples/second. The number seems very high. Could someone please confirm if this is correct?

  As noted by Jeff, a 9234, one ADC per channel.  So if you're sampling 3 channel 51.2 kech. / s, then you get 153,6 kech. / s.  To 3 bytes per sample, this means you broadcast 460.8 Kbps.  It is well within the ethernet or USB, specification according to the frame that you use.  I hope this helps.

  Thank you

  Sean

• Error: 200279. Problems with playback of three signals with NI 9234

  I try to read three signals at the same time with the NI 9234. But I have the problem with the buffer, I have read about this error and tried all the solution they gave (sample of Crescent by channel, increasing the number of samples per channel or decrease rate) but still nothing. I also try architecture design of producer/consumer model, but nothing, it always get this error. Someone knows how to fix this?

  

  lincoln1991 wrote:

  Well, I realized that the error only occurred when I was to "highlight the execution", it's wear and tear

  So problem solved.  Now you know why.

• Calculation of derivative of clock for the NI 9234 module

  Hello! I am relatively new to the use of material OR (and DAQ hardware in general), so this is probably going to be a really basic question.

  We plan to use two 9181 chassis cDAQ with two modules NI 9234 sample data on 8 physical channels simultaneously at a rate of 25600Hz. As we use the 9181 chassis we cannot material synchronization as described in this topic:

  https://forums.NI.com/T5/Multifunction-DAQ/trigger-acquisition-across-multiple-compactDAQ-chassis/TD-...

  «CDAQ-9181 will be out of the question because, as you said, it does not accessible PFI lines from the outside and you can not use a digital module for synchronization in a carrier case, because who was going to occupy the only available unit.»

  We need the synchronization between the channels to be accurate to ±100ms. According to the http://www.ni.com/pdf/manuals/374238c.pdfspecifications, the time base internal master (fM) has a frequency of 13,1072 MHz and an accuracy of ± 50 ppm. I'm trying to calculate the maximum amount of the derivative of the clock, more than 1 hour. The selected sampling rate influence the result?

  I think what meant Henrik was to connect the same signal to a channel on each of the two modules. This way, you have two digital versions of the same signal with each being scanned by a different clock. As long as it has the signal which can be identified in the worst case timing difference, you can determine that the sample [e] in a set of data has occurred at the same time (period a sample) as sample [k] with the other set of data.  Then, you apply this synchronization relationship to all other channels in the two modules.

  Strictly speaking, it is the difference in frequency between the two clocks, no drift.  Data sheet specifies the precision of freqeuncy as +/-50 ppm, but specifies no drift at all. Drift has usually two components - temperature and duration. Drift in temperature is specified as ppm/degree, while the drift of time (also known as aging) can be specified as ppm per year. The two drift coefficients are usually smaller than the specification of the accuacy. It is not unlikely that the precision specification can include effects of drift.

  If clocks drift significantly for the duration of your run, you may need to correct calendar several places in the data set.  If the two chassis are physically close, any change in temperature will probably be very similar for both devices and aging is generally not relevant for periods of one hour. I suspect that the initial frequency differences are the only things that will be of interest to you. If a few ppm drift issues, let the two devices to heat for an hour before starting the test. This should be enough to stabilize temperatures.

  Lynn

• If it hurts if I delete the system per user queued?

  original title: DURING the DISK CLEANUP

  WILL IT HURT IF I DELETE THE SYSTEM PER USER IN QUEUE AND WINDOWS ERROR REPORTING SYSTEM?
  I'M RUNNING OUT OF ROOM AND WHAT ARE THE FILES DEVOURS MORE SPACE!

  Yo can do that, but you can't win important disk space. The three main newspapers are system, security and Application and each maximum by default 20 MB each.

  How to deal with each must select Start, Control Panel, administrative tools, Event Viewer, Windows logs. Place the cursor on the system, click with the right button on the properties and select clear. Repeat for security and application logs. You can also change the default 20 480 KB 2 048 KB maximum. When you have completed the change make sure you click on apply. You must restart the computer to apply the new settings. You note miust use clearly if you want to set a lower maximum rate.

  You'll have more space by deleting old restore points. This action can greatly increase the free disk space.

  Select Start, all programs, accessories, System Tools, cleaning disk to emptying your trash, delete temporary Internet files and other selected options. I recommend also you click Other Options, System Restore and delete all but the last system restore point. Run Disk Defragmenter.

  Using the system restore option is most appropriate when your system is slow and you need to increase the free disk space on your C partition. If you have errors that could be solved by using the system restore to your system settings back to before the error occurred initially do not use this option.

  If more than one person uses the computer and they have their own user log you need to run Disk Cleanup in each user profile that you want to delete all the unwanted files.

  A better program of disk cleanup is cCleaner. Delete System Restore points may be important if you have little free disk space. The ability to delete them is one of the tools options. cCleaner comes with a registry tool. Do not use this tool as any registry cleaner could lead to the creation of very difficult to resolve system errors.

  http://www.CCleaner.com/download

• Modulo 10G sfp + by powerconnect 7048

  Salve,

  Sono alla ricerca del modulo di expansion in oggetto by uno pass di UN nostro client che ha G7SYZY1 st

  da schede tecniche should be part n. J3PC9

  You can help?

  Grazie

  Buongiorno,

  by kit accessori invito a cars o acquistare he OUA commercial di Re, questo forum enjoy being a silver is.

  Saluti

  Marco

• Request preventivo per batteria Controller PERC 6 / i by PowerEdge 1950 Server

  Buongiorno,

  come da oggetto sono a take UN preventivo per sostituzione di una batteria per controller it PERC 6 / I integrated by a server PowerEdge1950 in quanto it software Dell di administration lo tell in stato FAULT, low voltage.

  Speaking saluti.

  Buongiorno,

  the batteria Può acquistare online:

  Accessories.euro.Dell.com/.../ProductDetail.aspx

  Oppure take it supporto a pagamento tramite questo link:

  www1.euro.Dell.com/.../SS

  Todas

  Marco

• Upgrade of ram per server DELL PowerEdge 2950

  Buongiorno,

  necessitiamo di assistenza per UN PowerEdge 2950 venduto a nostro client nel 2008, by cui ormai fuori co (he e S/N FJ0C34J).

  It client vorrebbe fare della di 16GB ram upgrade.

  In attesa di risposta, in want pre-empted by attenzione

  Buongiorno,

  Unfortunately no vendiamo più banchi di memoria per questo modello di server.

  Who can find I banchi di memoria currently available alla vendita.

  Accessories.euro.Dell.com/.../genselector.aspx

  Marco

• Come fare per installare centro soluzioni hp

  Salve a tutti, I like sapere come fare per installare centro soluzioni hp by mia stampante hp deskjet f2280... prima avevo it special office dal, dopo aver disinstallato e poi queries program... no it 'e piu' ora it special.

  Grazie a tutti

  Hello ciapalacadrega,

  Try a utilizzare he di scorrimento nel CD download o integrated device. Let me know cosa hai discovered?
   
  Dal CD di original film:
  1 insert it nel lecteur_CD, e quindi only he programma di sommergibili
  2 open Risorse del computer, e quindi fare click destro sul reader CD e ha scelto aperta
  3 Apri cartella Util
  4 open the CCC cartella
  5 does he uninstall_L4 (o Bat (exe)
  6 Al ends della disinstallazione e stata computer completata it of riavviare
  7 low cleaning del disco da Accessori------Utilità di sistema
  8 download e installare versione più recent di Adobe Flash Player
  http://www.Adobe.com/support/flashplayer/downloads.html
  9 download he software completo e pilot con functional
  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=al-57723-2&CC=IT&DLC=IT&LC=IT&OS=2093&Product=3390947&sw_lang=
  10 does it download per reinstallare the stampante
   
  Se it was downloaded ed estratto al sistema software:
  1. not %TEMP% nel campo di corsa
  2 Cercare, e open the starting point cartella con 7z (example: 7zS2356)
  3 Apri cartella Util
  4 open the CCC cartella
  5 does he uninstall_L4 (o Bat (exe)
  6 Al ends della disinstallazione e stata computer completata it of riavviare
  7 low cleaning del disco da Accessori------Utilità di sistema
  8 download e installare versione più recent di Adobe Flash Player
  http://www.Adobe.com/support/flashplayer/downloads.html
  9 download he software completo e pilot con functional
  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=al-57723-2&CC=IT&DLC=IT&LC=IT&OS=2093&Product=3390947&sw_lang=
  10 does it download per reinstallare the stampante

• How to set the data inside the Set of ActionScript method accessor

  I can't set the values directly in the properties of a class of Action.

  For example, suppose that ModuleLocator is my name of the class Action.

  var myclass:ModuleLocator = new ModuleLocator();

  MyClass.User = "admin";

  I want to have something like: which is avialable in Java Bean to throw an exception on the setter
  Method when the value is equal to something that we are not waiting as indicated:

  public void setName (String name)
  {

  If (Name.Equals ("admin"))
  {
  throw new Exception();
  }
  }

  If possible Action Script class, how to call the setter ActionScript method so that the value should be set automatically in the property in the ActionScript class.

  Thanks in advance.

  
  

  Here is the code snippet for defining an accessor Set as

  private var _name:String;
  
  public function set name(value:String):void{
       if(value is not as per format)
            throw some exception;
       else
            _name = value;
  }
  

• Accessories HomeKit does not at home, but work outside.

  Hello

  I recently got a new Signal of Hunter ceiling fan, which is one of the first active HomeKit fans. I went through the installer on my iPhone 7 more for the fan about 20 times. Each time, installation works and the fan is controllable for about 1-5 minutes each time. Then the two buttons for the fan and light are starting to appear 'No response' on them. By clicking on the buttons, surprise, has no effect on the fan or light.

  I have my Apple TV (4th generation) Setup as a hub. I also tried setting to the top of my iPad as a hub. Nor has helped get my fan work. However... today we were shopping, and I happened to pull up the control center. I noticed that Photonics and fan buttons is no longer says "No response" and typed a. After a few seconds, the fan button said it was now on. Then I tried the light. Same positive reaction. I played with them a few moments and everything seemed to work... except that I couldn't be sure, because, you know, I was not at home.

  So, when I got home, I tried again... back to 'No response' on the buttons. What the devil? So I then turned off the wifi on my phone and guess what? The "No Response" disappeared and the fan and light work.

  So there is something when my iphone is on my own wifi network, it cannot speak to the HomeKit accessories. That makes no sense at all. Why would it be? Is there something on my router I need to unlock it (even if I looked and did not find anything which is blocked).

  I contacted the support team for the fan again. But I'm starting to think it's something with the iPhone, not the fan. Oh, and HomeKit opening on the iPad does not work internally either.

  Thanks in advance for any help you can provide.

  Bob

  Greetings, U2SockMonkey!

  To review your post, you have configured your Signal Hunter ceiling fan in your HomeKit and use your AppleTV and iPad as hubs. Your iPhone 7 more on iOS 10.0.2 intermittently becomes a message 'no response' when you try to control your ceiling fan with it but it worked fine while you were away from home. It is apparently only at home and I'll be happy to help you to get this working properly.

  If your iPhone, iPad or iPod touch connects to a Wi-Fi network - I found that iOS devices and a home network can stop talking to each other. Follow the steps in this article to ensure that your home's Wi - Fi signal is strong and consistent.

  Take care and thank you for using communities of support from Apple!

• Magnetic accessories are in agreement?

  Hello

  I currently have iPhone owner 6 + and plan own iPhone 7 + and I was wondering if it is safe to use magnetic accessories without causing damage to one of my iPhones.

  Can someone help me please?

  What kind of accessories would you consider magnetic?

• After installing iOS 9.3.4 audio accessories / load is no longer work with iPhone 6s

  Reference: iPhone 6s with iOS 9.3.4 and Pro iPad with iOS 9.3.4

  Colleagues:

  After the installation of the audio 9.3.4, iOS and other accessories is no longer worked / accused with the iPhone 6 g & iPad Pro.  Before the update of iOS, all accessories worked exceptionally well with the iPhone 6 g & iPad Pro.

  So far, Accessories Bluetooth will continue to operate with few problems.

  Please advise and assist the...

  It would be useful that you said what accessories do not work and what troubleshooting steps you have already done.

• Permit "Disable the web process per tab" under debugging, now Safari crashes whenever I try to start it.

  How can I Reset Safari Debug options when Safari does not work? Is there some command line options?  I enabled "Disable web of per-tab processes" and now whenever I try to start Safari crashes.

  Hi WellingtonWlfmn,

  Please update to Safari to the latest version: https://support.apple.com/en-us/HT204416

• Permit 'Disable web of per-tab processes', now Safari crashes whenever I try to start it.

  How can I Reset Safari Debug options when Safari does not work? Is there some command line options?  I enabled "Disable web of per-tab processes" and now whenever I try to start Safari crashes.

  Have you tried from Safari by pressing the 'shift '?