accessory Input Panel has stopped working

Similar Questions

• Windows Control Panel has stopped working and cannot read the CD

  Original title: windows control panel has stopped working

  When I went to install my Rosetta Stone program it showed Windows has stopped working and then installed the program and when I put the cd in my computer saids windows control panel has stopped working and cannot read the cd

  Hello

  You say "Control Panel has stopped working" or "Windows Explorer has stopped working"?

  Follow the steps mentioned in the article below and check if that helps:

  Start the computer in a clean boot state

  Start your computer in a clean boot state, and check if your computer is able to read the CD. Start your computer in a clean boot state helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• After you have installed the Rosetta Stone, the Windows Control Panel has stopped working

  After installing my rosetta stone program whenever I'm going to use. It shows the windows control panel has stopped working and cannot read the cd

  After installing my rosetta stone program whenever I'm going to use. It shows the windows control panel has stopped working and cannot read the cd

  Hey dododododo5

  you would like to check the exact version of the Rosetta stone that you try to use the vista Compatibility Center in the microsoft link below

  Rosetta stone version come as being incompatible with vista in the below link vista Compatibility Center

  If necessary, read the action recommended in the link below microsoft

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/search.aspx?type=software&s=Rosetta%20stone%20Program

  If your version of the Rosetta Stone is incompatible vista you can try to install as it is shown in the link below compatibility mode

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  Walter, the time zone traveller

• Computer freezes Vista, get the error of the audio control panel has stopped working

  my computer is running windows vista Home premium and after it starts and connects to the home screen, it immediately freezes and it says the audio control panel stopped working and the mouse and the keyboard does not work

  Reference Dell inspiron 5305 windows edition running Home premium

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:

  Start the computer in safe mode and check if the same problem occurs:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2:

  Try to perform the clean boot and check if it helps:

  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in step 7 of the above article.

  It will be useful.

• After the error message with computer-media center Scheduler etc has stopped working

  Original title: 8 boxes

  On separate cards on top of each other - they look like maps of correspondence-is this news centre Media State media stopped services aggregator, the drawer module igfx has

  order, hkcmd module has ceased, HD audio Panel has stopped working, Task Scheduler engine stopped working, a persistence module

  stopped working, sink to receive asynchronous callbacks for WMI client applications has stopped working.  They appear after the computer was during one

  While using the Internet, Facebook, please help.

  Hi sue them.

  ·         Did you do changes on the computer before the show?

  ·         Exactly when you receive the following errors?

  ·         What web browser do you use?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you to start in safe mode with network and check if the similar problem occurs in safe mode.

  Startup options (including safe mode)

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

   

  Method 2: Try the SFC (System File Checker) scan on the computer.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  I hope this helps.

• Once the programs are open a window pops up to say "program has stopped working". Even the programs that are running in the background when starting up are close. Help?

  Yesterday I connected my laptop and when I tried oppening a program a window pops up say "program has stopped working". I opened the control panel to start the troubleshooting, and another appeared window "Control panel has stopped working". I tried to open microsoft word and another window popped up, it is true, that you guessed it "word has stopped working". Does anyone know why all of a sudden nothing works?

  Hello

  try a SafeMode system restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• "Windows Explorer has stopped working" if I open Control Panel

  Guys, could someone help me please?

  When I open the Control Panel, it says "Windows Explorer has stopped working" and then it restarts Windows Explorer. When I right click on any folder it says "recording of the UI language is not valid" 5 times and for a split second, it says "Corrupted registry" then it works. But I am unable to use the control panel.

  I have Windows Vista home premium and Norton Antivirus.

  Can someone help me please?

  Hello

  The error message says something about corrupt registry.
  So, it seems that this issue would be related to incorrect or damaged registry entries.

  If the registry is damaged, your operating system will not work as it should and can feel such or similar problems.

  I m using the CCLeaner to clean the registry and other system files.
  It s a free tool and you should try it.

  If this does not work and if you notice the same question so I would recommend reinstalling the OS using the Toshiba recovery disc.
  In most cases this will help you fix this registry

• whenever I try to go into my control panel or computer I get a message that windows Explorer has stopped working and she said then it restarts, but I can access my computer

  Help!

  Whenever I'm trying to go in my computer or control panel, I get a message that windows Explorer has stopped working.  He then says that we find a solution, and the message disappears.  I can't yet get into my files computer or control panel.

  Whenever I'm trying to go in my computer or control panel, I get a message that windows Explorer has stopped working.  He then says that we find a solution, and the message disappears.  I can't yet get into my files computer or control panel.

  Why you are posting in the forum, IE?  Maybe the reason why you try to use the CP is to enter Internet Options?  If so, you can do it without the help of Windows Explorer (at least on your operating system) starting (using the Task Manager if necessary): control.exe inetcpl.cpl

  Otherwise what your problem probably means is that you have added something new to the root of the control panel which is not compatible with your OS, causing thus the Windows Explorer (not IE) crashing.  In this case, the same way you could get in Add Remove programs without involving Windows Explorer by starting: control.exe appwiz.cpl

  You can get help more informed by post on a forum that specializes in performance and Maintenance of your operating system.

  Good luck

  Robert Aldwinckle
  ---

• Hi my internet firefox does not start, when I try a fire fox has stopped working Panel rises

  The following comes in my microsoft windows fire fox has stopped working the Panel, please help me im not great the computer but can follow directions, thank you

   

  Signature of the problem:

  Problem event name: BEX

  Application name: firefox.exe

  Application version: 14.0.1.4577

  Application timestamp: 5000b 729

  Fault Module name: LVPrcInj01.dll

  Fault Module Version: 11.80.1048.0

  Timestamp of Module error: 488b3c09

  Exception offset: 00006074

  Exception code: c000000d

  Exception data: 00000000

  The system version: 6.0.6001.2.1.0.768.3

  Locale ID: 3081

  Additional information 1: cd21

  More information 2: 01d9174c762f08c4addf02cfdc2dd662

  3 more information: 5f3e

  Additional information 4: f33234e8bd4e4c7a45cfb8b872a5e602

  Hello

  For more assistance, please contact Mozilla Firefox.

  http://support.Mozilla.org/en-us/home

• whenever I click on 'control panel' or 'computer', it displays "windows Explorer has stopped working". It does not display the display of the control panel.

  Whenever I want to check computer (memory) space available on each drive, click on the 'computer' logo, it does not display the response on the screen. Instead, it displays a screen with a message "Windows Explorer has stopped working" for a few minutes and then returns to the original display.  I get the same answer, whenever I click on the "control panel" logo  I need advice how to solve this problem. Thank you.

  Hello

  Did you change your computer?

  I suggest you follow the link (this also applies to windows vista)

  Explorer Windows stopped working

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

• VAIO Vista Control Panel - Windows Explorer has stopped working

  Hello

  Whenever I click on 'control panel', 2 flash messages: 1 says: "Windows Explorer has stopped working" and then says the following message: "Windows Explorer restarts.  So, I have not been able to perform the duties of "control panel".

  Can someone tell me how to solve the problem?

  Thank you.

  Organizational unit

  Hello

  I suggest you perform a clean boot in order to check whether a third-party program or service that runs in the background is the origin of the problem.

  Refer to this article for help:

  
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  
  Note: please check that you put your computer to normal startup mode after completing the troubleshooting steps. Steps are available in the article above.

• Try to change the mouse settings in Control Panel, receive the error "windows rundll.exe host has stopped working".

  When I go into the control panel to change my settings for the mouse, I get the error "windows rundll.exe host has stopped working", therefore, you cannot change the mouse settings, how do I fix it?  My mouse is out of control! :)

  * original title - why windows will not host rundll.exe I would change my settings of the mouse? *

  Hello

  If you use 3rd party mouse drivers updated or reinstall those who, like Logitech, Microsoft
  Wireless and so on.

  =================================================================

  To solve the problems:

  If your: Windows host process Rundll32 has stopped working
  http://www.WinVistaClub.com/T40.html

  What is rundll32.exe and why it works?
  http://www.howtogeek.com/HOWTO/Windows-Vista/what-is-rundll32exe-and-why-is-it-running/

  What is the suspicious Rundll32.exe process?
  http://WindowsXP.MVPs.org/Rundll32.htm

  -----------------------------------------------------

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------

  If no joy trying to determine what is the cause:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes without doing anything - then right
  Click on taskbar - task manager - take a look at stored by - Services - process -.
  It's a quick reference (if you have a small box left - show for all users, then
  Check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see who are loading is method 2 - using MSCONFIG then after a
  a list of these here.
  --------------------------------------------------------------------

  Tools that should help you:

  Objects of process Explorer - free - find out what files, registry keys and other processes
  have open, which DLLs they have loaded and more. This exceptionally effective utility will be
  even show you who owns each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured so that it starts automatically when your
  system boots and you log in. Autoruns is also the full list of registry and files
  locations where applications can configure start automatic settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL activity
  in real time.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded
  automatically when Windows starts. For each request, the following information
  appears: product Type of startup (registry/Startup folder), Command - Line String,
  Name, file Version, company name, location in the registry or the file system and more.
  It allows you to easily disable or remove unwanted programs that run in your Windows
  startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not.
  The window Watcher says it all, every window created by all programs that are running, the statement
  If the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  Hope these helps.

• Control Panel System Windows Explorer has stopped working

  When I press on the Control Panel, system, I get an error "Windows Explorer has stopped working" and then control panel stops. I get this error every time I have to perform this action. When I run my PC on Safe Mode, it works fine and I get no error and I'm able to run the options that appear when the 'Systems' option is selected. Other tasks in the control panel seem to work correctly.  I also noticed that I get similar messages "windows Explorer or the program has stopped working" periodically when I perform other tasks in internet explore, etc.

  I tried all the recommendations described in of KB/269949 and KB/929135 knowledge articles and many items in the Microsoft community, Microsoft and the Internet site. For example, update the video driver, auditor of file system (CFS), Virus scan, Mode safe, clean boot, memory RAM test, etc.. I also tried all the relevant actions I could think under the Microsoft Fix tool. Each of them has not solved the problem.

  I have a laptop Acer Aspire 5742 G with ATI Mobility Radeon HD 5470 with 8 GB of memory, running Windows 7 with all the latest updates installed, so all drivers have been updated. I also use the last IE 11 with all updates.

  If anyone knows a similar problem with Windows 7, Windows Explorer and Internet Explorer 11, or has a recommendation how to fix?

  Hi Ravi,

  This is an update to my problem. It might be useful to others with similar problems.

  My problem has not been resolved, but I decided to live with it. It was a difficult decision after a major disaster, I almost lost everything on my PC to try and solve the problem.

  I put the finger on the problem with the graphics ATI Mobility Radeon HD 5470 version 8.741.1.5000 dated dated 25/08/2010 driver. I noticed that when I check for an update using Control Panel, Device Manager, select the graphics card above and updates, windows comes back with a message indicating that it is the best available driver.

  I made the mistake to check the AMD website to see if there is a newer driver. According to their instructions and download their program, they recommended a more recent drive using the catalyst for AMD. The new driver is Version 14.301.1001.0 dated 15/09/2014 date. The same driver is also selected if I the Slimdrivers application user. With this new driver, the problem disappeared. In other words, I was able to use the Control Panel, System menu and access the submenus system without any problems. I thought I had solved the problem. I repeated the process and checked for the driver from the Windows Control Panel, Device Manager and look for the updates. Surprise. This review of windows update back to the original version of the 25/08/2010. The problem is back again. I repeated this process with re-installing Catalyst from AMD with the same results.

  However, I noticed that the AMD Catalyst, never finished the installation and the installation crashed. Updated the driver before it crashed.

  My major problem occurred when I tried to restart the PC with the new driver installed by AMD Catalyst. My PC and Windows would not start. He gave me a number of errors that the problem cannot be corrected. I tried all the solutions, Safe Mode, point to restore, System Restore and all the choices given in the articles from Microsoft. None of them worked.

  Finally, after many hours, days and nights that I was able to use an Acer recovery disk, I created when I bought the laptop. One on the Image worked system recovery options and I could get my PC to a more ancient date. The driver is the original edition of 2010 the year with the same problem.

  Therefore, I decided to live with the problem. I can access the submenus of system using startup and entering in the auxiliary system option in the search box. I wrote these submenus.

  WARNING TO OTHER USERS. DO NOT TRY to UPDATE THE ATI Mobility Radeon HD 5470, 8.741.1.5000 driver version dated 25/08/2010, using catalyst of MCDA.

  Furthermore, my assessment is that if I try to restore my PC to the factory default condition, once all windows updates are installed and I install my apps, the same problem will occur. If I did think I would lose a lot of useful applications, which I'm not sure that I can restore. I have a lot of useful data that I use for more than 20 years and I can't afford to lose their jobs. I would live with the problem until something more grand occurs. In this case, I would by a new laptop. I would make sure that there no AMD ATI products on this topic.

  Thanks again for the time. There is no reason to answer, unless as described above, you have seen something new.

• Windows Explorer has stopped working and needs to close"error message while opening the control panel in Windows 7

  Original title: "Windows Explorer has stopped working and needs to close" Windows 7

  Help, everytime I try to go to the Control Panel, I get the message "Windows Explorer has stopped working and needs to close"

  
  I searched some other forum posts and can't find anything that works

  I tried using my guest account

  Ran antivirus/spyware

  Disc chk

  scannnow

  shooting and antivirus (under msconfig) programs

  nothing seems abnormal in the printer and device section

  When I look at the errors, which seems to be the culprit: "KERNELBASE.dll, version: 6.1.7601.17651.

  Because of this error, I can't (or don't know how) uninstall programs or doing anything in the control panel.

  
  I tried to install ms office 2010 when it started past so now I uninstalled all older versions of office and can not install a new because it says I need to uninstall the old version of Groove (not sure that I have never used it).

  I'm not good at this stuff so pls be kind in your explanations of what I should try.

  Thank you!

  
  Julie

  PS, I have an improved version of Windows 7 and do not know where the drive is.

  Try this:

  1. press CTRL + ALT + DEL
  2. Select the Task Manager
  3. go to: processes > explorer.exe > end process
  4. once go to: Applications > new task > explorer.exe
  See if that helps.

• Cannot open the control panel and workstation - "Windows Explorer has stopped working"

  Original title - I can't open my computer or control panel.

  I try to open my computer or control panel so I can uninstall something I think that may have caused a problem. When I try to do so, a window opens saying "Windows Explorer has stopped working". I don't know what to do. I think it was some game, I installed recently which caused this.

  Restart your computer in safe mode by pressing F8 just before windows logo appears after intervention by the bios. And see if you can open my computer or control for safe mode. If you then uninstall the program/game where you doubt. also run msconfig and remove startup programs that you do not use frequently and do not trust. Also if you have recently added a toolbar or of any custom theme and then disable it. then reboot in normal mode and see if the problem persists. It will be useful.

  Good luck!

  Vanshaj Daga [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]