Accommodation of the issues with CSS

Similar Questions

• View the issue with a DVI-I got splitter to Dell Optiplex to adapt TV

  Good evening!

  I work in IT and my understanding of these things is superior to what a novice and a part of the reasons why this question is so frustrating. It should also be noted that I am also posting this in Dell support forums to cover all the bases.
  Here is my goal:
  To use my model of TV LED Panasonic TC-L47e5 as my primary and only monitor for a Dell Optiplex 745
  My configuration:
  Dell uses a DVI-I've got splitter (DVI & VGA) as she went out to monitoring devices. I use a DVI (male) to HDMI (female) to connect on one of my HDMI inputs on the TV.
  The problem:
  Until I'm the adapter to the DVI, I used the VGA with no issues whatsoever. However, once I plugged the DVI - HDMI setting, it was working fine until I unplugged the VGA it is connected to the connector on the back of the TV. The screen went black, even though it was on the HDMI input. I tried to update the drivers, configuration of the display settings, etc and nothing allows me to run the installation of DVI-HDMI without going through the connected VGA also. If I switch back to the VGA input on the tv I see black. But if I unplug the HDMI, I see the desktop. It's very strange, but it seems that thought the VGA adapter display takes over, which is insane, because the pc shows through a DVI - I connection separation. I scoured the internet for a solution and this little hiccup is driving me crazy. Any help you all can provide is greatly appreciated.
  Thank you!

  Hello Hunter M.

  Welcome to the Microsoft community.

  You need a video cable to make the physical connection. For a better image quality, you must connect to the computer to the TV using standard VGA ports or via DVI to HDMI cable provided your TV supports these ports.

  I suggest to disconnect the HDMI cable and try to connect it buy, follow these steps.

  1. Turn off your computer and place it near your TV. Unplug the monitor, but leave the mouse and keyboard connected.
  2. Connect the video cable appropriate to your computer's output to your TV.
  3. Turn on your TV and set it to the input that matches the output on your computer. You may need to refer to the supplied with your television user's guide for instructions on how to do it.
  4. Turn on your computer.
  5. You should see windows displayed on your TV. If the screen looks stretched, or part of the screen seems cut off, you will probably have to adjust the screen resolution in Windows.
  6. If Windows is displayed on your TV, you will need to reconnect the computer to your monitor and adjust the screen resolution before connect you to your TV.

  See also:

  http://Windows.Microsoft.com/en-CA/Windows/connect-computer-TV#1TC=Windows-7

  I hope this helps. Feel free to write us again for any further assistance.

• {tag_blogpostbody, 300} used in blog email feed campaign - can this will bring the title with CSS?

  Using of {tag_blogpostbody, 300} used in e-mail power campaign blog - can it be with CSS inline style?

  Have formatted the template to use in the email campaign - formatting in template (.tpl) as follows in the row in the table to display the blog - feed

  < b >

  < td colspan = "2" > < span style = "line-height: 20px;" font size: 13px; do-family: Verdana, Arial, Helvetica, without serif. color: # 3-3420; ">{tag_blogpostbody, 300}</span >

  < table >

  < /tr >

  Any help appreciated.

  Thank you, Megan

  They come as part of making the blogpostbody, 300 - you should change to {tag_blogpostbodypreview}, and white and it will pull the first paragraph and no reading more or after the comment to the text to read more.

• Add/Remove the effect with CSS

  Hello

  I'm trying to implement some sort of entry in my application validation. I expanded TextField to accept only the entry with a number of characters and corresponding to a regular expression. When the regular expression match falls, I want textfield to have an innershadow, and he does. However, the effect is not removed when I remove the CSS class where this effect is defined.

  setOnAction(new EventHandler<ActionEvent>(){
              @Override
              public void handle(ActionEvent e) {
                  if(!getText().matches(restrict.get())) {
                      getStyleClass().add("invalid");
                  }
                  else {
                      getStyleClass().remove("invalid");
                  }
  
                  for(int i=0; i<getStyleClass().toArray().length; i++) {
                      System.out.println(getStyleClass().toArray()[i]);
                  }
              }
  

  .text-field.invalid {
      -fx-border-color: indianred;
      -fx-effect: innershadow(gaussian, indianred, 5, 0.5, 2, 2)
  }
  

  The style class "invalid" appears in the table when the entry is not valid. The class is removed successfully, but not the effect. How can I fix it? Do I need to set the effect in code and no CSS?

  Have you tried this:

  .text-field.invalid {
      -fx-border-color: indianred;
      -fx-effect: innershadow(gaussian, indianred, 5, 0.5, 2, 2)
  } 
  
  .text-field {
      -fx-border-color: indianred;  // change to some other color maybe transparent or use null
      -fx-effect: null
  } 
  

  Could be he you pls tell me how to use the CODE tags.

  Post edited by: jojorabbit

• Graphic Flex: how to remove the shadow with CSS?

  Hello!

  How can I remove shadow my columns with CSS?

  I know that I could do:

  <mx:seriesFilters>
    <mx:Array />
  </mx:seriesFilters>
  

  But I'd really only my CSS to control all of the visuals.

  Thank you!

  -Dwayne

  Don't think that you can. Since it is an array, you need to fix in the code. Sorry, Flex is like that, it makes you do a lot of things in the code that should be doable in CSS. But on the side of good news, instead of what you have done you can put this argument in your table tag: seriesFilters = "[]".

• Need help on the layout with CSS

  Hello

  Go easy on me I'm new to the Web design...

  I'm working with CSS, learning about various tutorials and have a basic understanding.  Where I am getting lost is I do a page template (dwt), I've done this before but this time I want to be more than a simple text in my pages editable region

  Thus, for example

  index

  loads with a text and a video

  Page1

  some of the texts, images, ads etc.

  Page2

  some of the texts, images, ads etc.

  fundamentally something different on each page, but I only see the option to leave an ' editable ' for each page... the logic in my brain is I create a DWT with my site header and navigation and footer and have content in the average change for each page depending on what I want to have this page?

  What confuses me, that of if I had to do more than 1 dwt, then how could manage navigation in one place?

  Thank you

  I think you mean I should use relative not absolute positioning?

  No, I mean that you must use no positioning at all. Read this - http://www.apptools.com/examples/pagelayout101.php

  with CSS, if I hear you correctly the style sheets should be used for the control of aspects throughout the site, page specific CSS should be put on the page itself... seems logical because it could keep things tidy.

  Yes.  You have a right, even if you can put also specific to the CSS in the stylesheet global page if the selectors so that the rules are specific for tags and attributes on specific pages.

  Good luck!

• Source of the region with css script

  Hi Andy -.
  
  I've implemented the shape with the source of the region of css scripts. After the filling of data by default for an item, I tried to print the form using the print mode, the data appeared at the top of the form, it no longer is displayed in the input field.
  
  I want to be able to print the form with the integrated data (mode friendly printer), is - it possible using scripts css as the source of the region?
  
  Thank you
  Yivon

  Hello

  Paste the HTML into a post is a bit of a pain.

  First of all, you must surround your code with {code} tags. Second, all the < and > characters must be replaced by & lt; and & gt; Finally, all Roger has to be replaced by & amp; I tend to type/paste code in a text editor and then make replaces overall.

  Thus, for example, to display:

  < div > blah blah < / div >

  You must enter:

  {code}
  & lt; div & gt; Blah blah & lt; / div & gt;
  {code}

  Andy

• Driver power state failure - cannot determine the issue with the driver

  I had this problem for a long time, since the upgrade to Windows 8 beta, did not happen on Windows 7. WIN8 (clean install), 8.1 and 10 technical preview all do the same thing. I get the BSOD with a message about the failure of State driver, and my system restarts. It happens a few times a day. I noticed a few times, my devices Sata work stop shortly before the accident, sometimes apps are block just before, but not always. No index than that. Help, please! TIA!

  Empty the file: https://onedrive.live.com/redir?resid=984652FADD494F38%21315502

  ZARNet

  This phenomenon was related to the storage IDE ataport.sys driver.  I also notice that you have a 2009 jriad.sys driver.  I remove the 2009 driver and perform an audit to systemf on BONE Island, but it can be associated with HD and not driver related, which would explain why it happened in all OS' are

  Please run a check of system files (SFC) & DISM if you're on win 8 or higher 

  
  

  All instructions are in our Wiki article below...
  If you have any questions please ask us for .

  Check the file system (CFS) Scan and repair system files

• the issue with ME

  I have 100 sequences from 3 minutes to the Premier Pro, I need to export, I have usually run it via Media Encoder from one day to the next but pose with transitions and keyframes (for example in the blur effect) restores do not smoothly. When I export by the Prime Minister, it is absolutely perfect. The setting is exactly the same. But when I export it through ME, the fades and transitions between the effects (in particular the Gaussian Blur) doesn't run as smooth as it should. I experimented with a few different settings, codecs and searched the Internet without success. I don't want to first export directly because I will need to do the same with 100 videos in the future. All my software is up-to-date.

  
  

  I know there have been problems with Media encode recognizing the effects of the lumetri, etc., but this seems to be something different.

  Can anyone help?

  
  

  Thanks Ash

  In the SOUL, go to Edition > Preferences > general and turn sequences natively import.

• Compatibility issues with CSS

  Hello

  I don't know if this is the right place to ask this question, but I had to start somewhere I have recently published my site, mei-vt .net, and a CSS effect I have does not work in Firefox, but IE works. Firefox is my main browser and I use it to preview pages during the construction of the site. The hover effect worked fine in preview and stopped working only when I published the site to the my Web host.

  The effect is at the top of the sales page (found here http://mei-vt.net/commercial.html). It consists of 6 photos that are growing to fill the border when wriggle on. The original code was written by a freelance web designer and original copyright information are intact in my external stylesheet. The site said the effect has been tested and works in Firefox, but it doesn't seem to work for me.

  I'm going to paste below the content any style sheet that controls the effect and source code can be accessed from the page. Please tell me what I need to do to make it work in Firefox!

  Thank you.

  /* ================================================================
  This copyright notice must be untouched at all times.
  
  The original version of this stylesheet and the associated (x)html
  is available at http://www.cssplay.co.uk/menu/image-manipulation.html
  Copyright (c) 2005-2010 Stu Nicholls. All rights reserved.
  This stylesheet and the associated (x)html may be modified in any
  way to fit your requirements.
  =================================================================== */
  .gallery {padding:0; margin:0 auto; list-style:none; position:relative; width:480px; height:280px; border:5px solid #444;}
  .gallery li {width:160px; height:140px; float:left;}
  .gallery li a {display:block; width:160px; height:140px; position:absolute;
  -webkit-transition: 0.75s ease-in-out;
  -moz-transition: 0.75s ease-in-out;
  -ms-transition: 0.75s ease-in-out;
  -o-transition: 0.75s ease-in-out;
  transition: 0.75s ease-in-out;
  }
  .gallery li a.p1 {background:url(file:///C|/Users/Krista/Desktop/sites/MEI/local_sites/images/h2.jpg); opacity:0.5; left:0; top:0;}
  .gallery li a.p2 {background:url(file:///C|/Users/Krista/Desktop/sites/MEI/local_sites/images/icehaus.jpg); opacity:0.5; left:160px; top:0;}
  .gallery li a.p3 {background:url(file:///C|/Users/Krista/Desktop/sites/MEI/local_sites/images/h1.jpg) ; opacity:0.5; right:0; top:0;}
  .gallery li a.p4 {background:url(file:///C|/Users/Krista/Desktop/sites/MEI/local_sites/images/park.jpg); opacity:0.5; left:0; bottom:0;}
  .gallery li a.p5 {background:url(file:///C|/Users/Krista/Desktop/sites/MEI/local_sites/images/Club.jpg); opacity:0.5; left:160px; bottom:0;}
  .gallery li a.p6 {background:url(file:///C|/Users/Krista/Desktop/sites/MEI/local_sites/images/frame.jpg); opacity:0.5; right:0; bottom:0;}
  
  .gallery li a:hover {position:absolute; width:480px; height:280px; z-index:100; opacity:1;}
  
  .gallery li a.p1:hover {left:0; top:0;}
  .gallery li a.p2:hover {left:0; top:0;}
  .gallery li a.p3:hover {right:0; top:0;}
  .gallery li a.p4:hover {left:0; bottom:0;}
  .gallery li a.p5:hover {left:0; bottom:0;}
  .gallery li a.p6:hover {right:0; bottom:0;}
  
  .gallery2 {padding:0; margin:0 auto; list-style:none; position:relative; width:480px; height:280px; border:5px solid #444;}
  .gallery2 li {width:240px; height:140px; float:left;}
  .gallery2 li a {display:block; width:240px; height:140px; position:relative; overflow:hidden;}
  .gallery2 li a img {border:0; position:absolute; left:-360px; top:-210px; opacity:0.5; width:960px; height:560px;
  -webkit-transition: 0.75s ease-in-out;
  -moz-transition: 0.75s ease-in-out;
  -ms-transition: 0.75s ease-in-out;
  -o-transition: 0.75s ease-in-out;
  transition: 0.75s ease-in-out;
  }
  .gallery2 li a:hover img {position:absolute; left:0; top:0; opacity:1; width:240px; height:140px;}
  
  a.p7 {
  	display:inline-block;
  	width:75px;
  	height:75px;
  	text-decoration:none;
  	background:#fff;
  	border:0;
  	float:left;
  	margin-top: 20px;
  	margin-right: 0;
  	margin-bottom: 0;
  	margin-left: 20px;
  }
  a.p7 img {
  	display:block;
  	border:0;
  }
  a.p7:hover {
  	text-decoration:none;
  	background-color:#8c97a3;
  	color:#000;
  	position:relative;
  	z-index:500;
  	text-align: left;
  }
  a.p7 b {display:block; position:absolute; left:-9999px; padding:10px; opacity:0;
  
  -o-box-shadow: 5px 5px 2px rgba(0, 0, 0, 0.4);
  -icab-box-shadow: 5px 5px 2px rgba(0, 0, 0, 0.4);
  -khtml-box-shadow: 5px 5px 2px rgba(0, 0, 0, 0.4);
  -moz-box-shadow: 5px 5px 2px rgba(0, 0, 0, 0.4);
  -webkit-box-shadow: 5px 5px 2px rgba(0, 0, 0, 0.4);
  box-shadow: 5px 5px 2px rgba(0, 0, 0, 0.4);
  
  -o-border-radius: 8px;
  -icab-border-radius: 8px;
  -khtml-border-radius: 8px;
  -moz-border-radius: 8px;
  -webkit-border-radius: 8px;
  border-radius: 8px;
  
   -webkit-transition: opacity 0.6s ease-in-out;
  
  }
  
  a.p7:hover b {top:-65px; left:110px; padding:10px; border:1px solid #aaa; background:#fff; opacity:1.0;
  
  }
  
  #info {z-index:100; height:22em;}

  Your site works for me with the changes you have made.

  You can reload webpages and ignore the cache.

  • Hold SHIFT and click reload.
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Cmd + Shift + R' (MAC)

• Need help on the issue with wireless connectivity on Win7 - dynamic key exchange did not within configured time

  Hello

  I get below error when you try to connect to the wireless router. It was working fine until a few days back.

  InterfaceGuid {1F8AA774-8AE0-48BA-87EB-5522A6070F3E}
  InterfaceDescription Dell 1540 802.11a/g/n (2.4 GHz/5 GHz) Wireless
  ConnectionMode automatic connection with a profile
  BSSType infrastructure
  Key exchange dynamic FailureReason failed within configured time
  Used 294917
  ConnectionId 0x9

  What is the reason code 294917?

  Any help to solve the problem would be useful.

  Kind regards

  Srinivasa

  Hi Richard,

  Thanks for the quick response.

  I tried diff incl. power options. Nothing has worked.

  Finally, I reset my router unit today and it works now.

  Hope that this issue would not yet :-)

  Kind regards

  Srinivasa

• lose the link with CSS when downloading

  I hope some of you can help me with this problem. I'm currently updating my site. I have a page with a link basic HTML to external CSS and JS files. I use Dreamweaver CS6 and when I put it all together, it looks good in the mode live view. But when I download the files, the link to my CSS gets completely abandoned. I see that all of the current versions of my files are downloaded. But I lost all the attributes of the CSS and the JS functionality. I know the obvious culprits would be the code HTML is oriented in the wrong place or the file is not named correctly. But both of these things look good. Unless I'm looking in the wrong places.

  any help would be appreciated. my coding skills are minimal.

  Thanks in advance.

  When I look at retouching_temp.html I notice that the CSS files are not in the right place. Take a look at lines 12 and 13

  "' / twentytwenty-JF/css/foundation.css" rel = "stylesheet" type ="text/css" > ""

  "" "/ twentytwenty-JF/css/twentytwenty.css" rel = "stylesheet" type ="text/css" > JFP_site.css "rel ="stylesheet"type ="text/css">."

  The points above in the directory tewntytwenty-JF branching off of the root directory of the site. In fact they brack out of the test directory. If you leave the backslash code, you must be right. It should look like the following.

  twentytwenty-JF/css/foundation.css"rel ="stylesheet"type ="text/css">" "

  "twentytwenty-JF/css/twentytwenty.css" rel ="stylesheet" type ="text/css" > JFP_site.css "rel ="stylesheet"type ="text/css">".

  I noticed that you use Foundation but I don't see the related JavaScript code.

• Setting the row height of the table with CSS

  I'm trying something for a project I'm working on. I created a table that resembles the creation mode, but when I see him live or in a browser, the elements are spaced too far. It seems that the height of the table, it is not this design point of view shows that it is. How can I change the attributes of tables to adjust the height for items will be close together and whitespace not so? Here's what I did:

  	MONDAY Take advantage of our 2 for 1 special dinner in the entire menu (up to $8.95 discount)
  	TUESDAY House margaritas or any kind of beer for only $2.95!
  	WEDNESDAY Enjoy 2 dinners for $20.00 from our special menu (This special offer cannot be combined with any other offer)
  	THURSDAY Ladies Night! For only $5.00 martinis
  	FRIDAY Happy Hour at the bar alone 4-7 PM
  MARIACHI BAND SUNDAY LIVE!

  I'm sure I'm missing something stupid, but any help will be appreciated. Here's the real link in my browser:

  http://ymimusic.com/delete.html

  Thank you very much!

  It's the abbreviation CSS.  Rather than express margins and padding with 8 lines of code like this:

  {#divName}

  top of the margin: 12px;

  padding-top: 12px;

  right margin: 12px;

  padding-right: 12px;

  margin-bottom: 0px;

  padding-bottom: 0px;

  left margin: 12px;

  padding-left: 12px

  }

  You can get exactly the same thing with just 2 lines of CSS code shortcut.

  {#divName}

  margin: 12px 12px 0 12px;

  Padding: 12px 12px 0 12px;

  }

  Nancy O.

• Can't the forms with CSS in DWCS6 style / must add menu WYSIWYG

  Hi all

  I put my two 'problems' in a single topic:

  (1) I tried to add some style on my pages of forms in them, but it seems that it does not work well, I explain: I create a php page, I insert a form with text fields (user name and password, for example) and the "login" button The form ID is "LogForm. I create a CSS class called "." FormCSS' and inside I put the rule "align text: right. I apply the rule to the form and all of the text inside goes to the right. I try online (real server and local server, I tried both) but nothing happens, the form elements to remain on the left. I tried to apply the Lun ID of the form. Nothing.

  No doubt, I'm doing something wrong. Even with the text and the tables within the shape, I can't move/change, at all. In design mode, I see all the changes, I can't online (chrome and IE). What should I do?

  (2) I create a page to insert long text in a database, as when you post in a forum. I would like to insert some kind of toolbar with options align, style and so on, as WYSIWYG editors. Is this possible? Is it possible to put a toolbar like this in DWCS6?

  Thank you

  #1 you're not comb the selectors in correct form: form, fieldset, label lable, input, textarea...

  See example of a CSS style HTML5 form. View source to see the code.

  HTML5 form with jQuery Validation

  #2 Watch CK Editor.

  CKEditor.com | The best text editor of web for all

  Nancy O.

• Need help to replace the tables with CSS

  Having trouble finding how to recreate these stacked boxes:

  http://96.0.181.107/_report-containers.html

  like div using only CSS, keeping the same look/padding.

  I want to close the space between the containers by a few pixels, that I can't do with tables and use the simplest code possible.

  Thank you!

  Try this (view source to see the code)

  http://ALT-Web.com/test/boxes.html

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  http://ALT-Web.com/
  http://Twitter.com/ALTWEB