Accounting on my PIX command failed

Similar Questions

• error message retr command failed

  For some reason, I am unable to ask a question or make a comment on the Thunderbird help section. I logged in and went through all the subcategories, but it brings no option to post.

  As of this post, I don't have this problem post on the firefox support forum.

  This is the solution I found the problem of "retr command failed:

  I noticed that I could get a few emails each time thunderbird would connect, before he got the error message. So, I put the option to check for new messages at 1 minute and left the computer at night. In the morning, he had obtained all e-mails from the server yahoo.verizon.

  See also additional information and alternatives in the my post under # 739827 answer ~ J99

• When I use the Client for NFS provided by Windows 7, I'm unable to connect. The "mount \\ip address\share Z:" command fails with the error code "the path not found network".

  Identification of customer's Windows 7 NFS UID GID information

  I am trying to connect to the Windows 7 Client NFS on a server running on a computer (VxWorks) NFS.  I am able to properly connect Client NFS software by a 3rd party on the NFS server.  However, when I use the Client for NFS provided by Windows 7, I am unable to connect.  The \\ip address\share Z: mount"command fails with the error code"the path not found network ".  I can't do a ping of the computer running the NFS server.

  The NFS Client operating system: Windows 7 Ultimate, 64-bit

  Data captured by Wireshark

  MOUNT V1 EXPORT call 3rd party client
  Identification information Flavor: AUTH_UNIX (1)
  Length: 32
  Stamp: 0xc7065970

  Machine name: PC
  UID: 1000
  GID: 1000

  MOUNT V1 EXPORT appeal of the NFS client
  Identification information Flavor: AUTH_NULL (0)
  Length: 0

  It seems that the credentials of NFS Client are not correct.  How can I change the flavor of AUTH_UNIX and the UID and GID to 1000?

  Hello VDAEMP,

  As Eddie and Sudarshan has said, the Microsoft Answers community focuses on issues and problems related to the consumer environment. Please join the public IT pro TechNet forums below:
  TechNet - Windows Server
   
  Thank you

• series PIX command authorization

  Hi all

  can someone tell me please the use of GBA pix command authorization. I understand the use of a shell command authorization.

  I'm sorry if the question is too dumb. I am completely new to this sector.

  Thanks in advance.

  concerning

  Kirti.

  Pix command authorization set was designed to set up approval order with PIX/FWSM, as shell pix did not differ for IOS, but at the launch the actual code, PIX/FWSM seems to work correctly with the auth command sets the shell.

  So no one is really interested in using shell Pix more, more to watch new codes of pix it seems that developers are more likely making Pix Shell same shell IOS, so even if they stop PIX command sets in the next version of ACS I will not be surprised.

  ~ Rohit

• "Command failed" error in Oracle Discoverer 10g

  Hi all
  I get "Command Failed" when you export XML workbook in discoverer administrator.
  This is the steps I followed.
  Step 1: Connect to Discoverer Administrator and connect database EUL.
  Step 2: Choose file-> export
  Step 3: Choose the objects selected in the layer of the end user option button
  Step 4: Select object drop down and selected Workbooks the workbook
  Setp5: Click on the Browse button to chose the XML path on your computer and look for the button "generate XML for the exported files.
  
  Please let me know how to solve this problem.
  The "Command failed" error comes only for workbooks cutom, not for oracle seeded ones.
  
  Kind regards
  Prasad

  Please see (Business area Export in Discoverer 10g Administrator does not work, error "Command failed" [1083374.1 ID]).

  Thank you
  Hussein

• fastboot failed (write command failed)

  Yesterday, I received my motorcycle X Pure 2015 and have everything set up. The phone itself works very well. Now I want to unlock the bootloader so that I can root the phone to use the Ti backup, etc. I followed the instructions on the page of Motorola to the https://motorola-global-portal.custhelp.com/app/standalone/bootloader/unlock-your-device-b to the letter. However, when I run 'fastboot oem get_unlock_data' initial fastboot command, fastboot returns the following error:

  Broken: (Writing the order failed (unknown error))

  Finish. total duration: 5.031 s

  I have USB debugging and OEM, unlock enabled both in developer options. The Pure starts in mode fastboot without any problem and 'fastboot devices' lists of my phone, so I make a connection. I am very experienced with Android and rooting different phones, as well as simultaneous use adb and fastboot, but I'm stuck on this one. Web searches have not turned much, probably because the phone is so new.

  Any ideas?

  Please do not take into account. I discovered that the problem was with my USB Setup. Everything is good now and I've unlocked the bootloader. Thank you to bike for the process simple and very nice phone! The unlockable bootloader, independence of the carrier and the microSD slot are the main reasons I went with the Pure.

• I can settings add e-mail account by using the command line?

  Can I programmatically or by using the command prompt add parameters of "e-mail account"? for example: IMAP/POP3 "Incoming mail server" etc.

  No, there is no API to add an account without the help of the default interface of the to do.

• WMIC command fails for the domain user

  Hi all

  I use windows 7 and testing commands wmic as below

  WMIC/node: "Computer1" / User: "domain\username" / Password: "password" PROCESS CALL Create "calc.exe"

  Most of the time control fails with RPC server unavailable to users in the domain (default of 75%). Working sometimes and mostly failing to time.

  Error code

  0x800706BA-online the RPC server is unavailable.

  If I use the local user, she is successful, command below still works (100% success)

  WMIC/node: "Computer1" / User: 'Nom_ordinateur\Nom_utilisateur' / Password: 'password' PROCESS CALL Create "calc.exe"

  I have two computers running windows 7, the firewall is disabled

  Executing command from computer2 as below

  WMIC/node: "Computer1" / User: "domain\username" / Password: "password" PROCESS CALL Create "calc.exe"

  1 computer settings

  1. Adds the domain under group administrator user
  2. Configure dcom through DCOMCNFG.exe and got all rights to domain user

  (DCOM remote launch and activation permissions for a user, the remote DCOM access permissions)

  1. Rights granted to wmi namespace (root, cimv2) of domain user using wmimgmt.msc (all rights to the namespace namespace and sub)
  2. Firewall settins according to the - http://msdn.microsoft.com/en-us/library/aa822854%28v=vs.85%29.aspx

  Note: The firewall is disabled

  1. UAC disabled
  2. Check rpcss and associated to the computer and all services are running

  What could be the reason of failure for the domain user (work awhile and is Server Unavailable RPC over time). Tried to restart that wmic user system and field control did not exist, after awhile like 30-45 minutes user field the wmic commands work and default again. How to solve this problem (such as checking the logs)?

  Thank you

  Mani

  Hello

  I suggest you according to the question in this forum and check if that helps:

  http://social.technet.Microsoft.com/forums/en/winserverDS

  It will be useful.

• Remote command fails when cross Foglight, but ok using command line

  Try to perform an action simple remote command when a rule triggers the file /sharedScripts of monitoring system.  When the alarm is triggered, an email is sent and action of remote command to find and remove the logs more than 10 days is supposed to work.

  The command to run is:

  find/sharedScripts/set - name "* .log" \ (-type f-mtime + 10 \)-exec rm {} \;) ""

  This command works well from the command line on the server, but when it is run by a remote control action, we get the following exception:

  2015-07-20 19:04:30.556 WARN [Action-4-wire-3856] com.quest.nitro.service.action.impl.command.RemoteCommandAction - the remote execution failed on the host prod - 108.llbean.com for the command "find/sharedScripts/set - name" * .log "------(-type f-mtime + 10 \)-exec rm {}------;)" "with the following error: 1.»

  I tried many iterations of escape characters, single/double quotes, etc...

  Has anyone else tried something like this?  I understand that I could create a script that has this command in it, but if I can avoid that I would because a similar process will be implemented through a hundred servers with different commands according to the system of files in place. In this regard, I would like to manage everything centrally if I can.

  Hi Golan-

  Thanks for the reply.  I got a response back from support today and it turns out that some avoidance that is required to run the command from the command line has been the cause of the problem running like a remote control action.

  This command works well on the command line:

  find/sharedScripts/set - name "* .log" \ (-type f-mtime + 10 \)-exec rm {} \;) ""

  but the avoidance of parentheses problem in Foglight. The following seems to work as a remote command:

  find/sharedScripts/set - name "* .log"(-type f-mtime+10)-exec rm {} \; "."

• PIX command to display the State of tunnel upwards or downwards

  I would like to ask if there is a specific order in the PIX OS, that will allow me to show if the tunnels I implemented for VPN from a distance PIX to local are active...

  I looked through the show? on the Pix but cannot determine...

  You would think that there is a command 'see the tunnel... "

  Hello

  You can use:

  "Show isakmp crypto her" to see whether or not your tunnel is mounted and,.

  "A show crypto ipsec her" to see if the packets are encrypted/decrypted or not.

  Kind regards

  Arul

• Cannot connect to admin account (the user profile Service failed)

  Hi all
  When I try to access my admin account, well I typed my password, BUT this message appears:

  User profile service failed
  User profile cannot be loaded

  I can get my guest very well account, but can not use my admin... anything that can help please!
  Anyone who can help would be great

  This problem may occur if the user profile folder is deleted manually. A profile that is manually deleted does not remove the security identifier (SID) of the list of profiles in the registry. If the SID is present, Windows will try to load the profile by using the ProfileImagePath that points to a nonexistent path. Therefore, the profile cannot be loaded. To resolve this problem, see here: http://support.microsoft.com/kb/947215

• PIX 515E - failed upgrade to ver 6.35-721-9

  PIX515E with 128 MB of RAM and 16MB Flash

  I just tried to improve my Pix515E of 6.35 to 7.21 - 9 in monitor mode. I am able to connect to the tftp server and upload the new image, once the download is finished my leaf through pix just re-boot and then not be able to find a valid image in flash.

  In an effort to fix this problem, I have tried since downloading worm 7.01 I read in a post that you should spend to 7.01 before going to subsequent revisions to ver 7. It downloads also successfully and starts then to scroll the new config my pix, until it reaches the line of configuration to the tftp server, then timesout and restarts.

  Have no clue? Any suggestions are welcome.

  Thank you

  I made this exactly the same there - from 6.3 to 7.2 about 2 weeks - this does not work if you do directly, and I found myself in with a completely erased flash memory monitor mode. fun. However, I can certainly you that from this State, if you load the version 7.0.5 TFTP image (in watch mode), it will work. Have you read the article in http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_sw/v_70/pix_upgd/pixupgrd.htm#wp1752751 do the fashion upgrade monitor? Probably yes... I think the version 7.0.x knows how to do some special things for the PIX boot loader that change to be compatible 6.x to 7.x compatible, that is why, you can't go directly to 7.1.x and 7.2.x 6.3. I wasn't originally planning to do the update mode monitor but my plans changed when erased flash 7.2, then could not load into flash. ;)

  So, you mentioned that when he reached the line of configuration to the tftp server, it expires and restarts... What is the command in your config? You load the config from TFTP during startup or something like that?

• ASA: Equivalent to the pdm on a Pix command.

  Hello

  I'm currently spending my Pix to an ASA 5520... itineraries of all ACL, static, groups, and so on work very well for transfer via BUT does not have the command of PDM. Is there a command for the SAA, which is equivalent to the command of PDM on the Pix?

  Thank you

  Chris

  Hi Chris,

  I haven't worked directly on a SAA, but I think that she and the PIX 515E I am watching with anger at the present time, both run 7.0.x.

  What you're after (the app formerly PDM) is now called ASDM. I * think * the same commands will work to implement access ASDM (enable http server, etc.), but the PDM commands that appear in the config are actually 'locators' that PDM is used to reference objects. Thus, when an object (network, etc.) has been created in the MDP, he created a "(emplacement PDM x) entry in the config to help track."

  I don't think that you can get away from simply by changing PDM to ASDM (or maybe it work?) and I think that what you have to do is to allow him to discover things for yourself, OR click on "unidentified object" button that appears from time to time.

  Out of curiosity, do you find ASDM an improvement on PDM? Maybe it's me, but I find them both extremely counterintuitive.

  HTH-

  Gary

• OPatch commands fail with code 255 error and not able to find pots YES

  
  Hello

  I am trying to apply a patch using opatch but I get this error: "OPatch was not able to find pots YES to load their duration. Please provide valid Yes location using 'oui_loc' option. OPatch failed with error code 255".»

  Oracle is 11.2.0.3 x 64 on Windows Server 2008R2 x 64. The PATH variable have % ORACLE_HOME%\OPatch, % ORACLE_HOME%\OPatch\jlib, %ORACLE_HOME%\bin in it.

  The single command OPatch that works and not to throw the error is the command "opatch version.

  OPatch Version: 11.2.0.3.5

  OPatch succeeded.

  No luck on the search for resolution of problem or documentation on MOS.

  I can't find any documentation on the option 'oui_loc '.

  Any help would be appreciated.

  Sébastien

  First check that your ORACLE_HOME\oui\jlib directory already exists. If so, make sure you have "srvm.jar" in the directory. If not, copy and paste the directory or file (depending on what you're missing) of 11.2.0.3 another environment. I had the same problem and support was able to recreate the problem by renaming the folder jlib, but my specific question was the missing file 'srvm.jar '. Copy one through another system solved this issue. If you are missing "srvm/jar", you can also check ORACLE_HOME\jlib for "srvm.jar", because this could be a problem, as well (it was for me).

• Use Tbird for 2 mail accts for years. Now my account icloud gives error "connection failed" & "re - enter the password. No problems in other e-mail programs.

  I am able to access my e-mail iCloud Internet & e-mail program. But now, I have "Login to the imap.mail.me.com server has failed." When I use my iCloud account. My other email account is well & I am sending and reception without problem. It is a disadvantage, obviously, but I'm able to use other programs is not the end of the world. However, I'm unable to access the sent items and really have to. I checked all the settings that are according to the instructions to iCloud and my password has not changed. I've had this problem for a few weeks now.

  So it turns out that Apple has applied two security verification step to my account. I now turned off and my mail works as it should.