ACE 4710 - routes in contexts different default

Similar Questions

• How can I set a different default browser?

  Is it possible to define another mobile browser as the default application on the iPhone 6 s?

  I have been using Firefox for the iPhone and love it, but whenever I click on a link in email or Safari everything that he brings.  Any way to do it?

  The scale of the system not. With some third-party application, you can select a different default browser, but which is limited to what the app developer has chosen to use and rarely (never) include all available browsers.

• Need to change the ACE 4710 certificate that uses the https access management

  I would change the certificate in Cisco ACE 4710 that uses for managing https access to the device. We always get the notice of security from the GUI because it uses a self signed certificate for access to the administration. Please suggest there is any mechanisam or availabel for the procedure to change the self signed SSL certificate?

  Ranjith,

  You can check this bug:

  CSCte42757

  Jorge

• Mr President, how can I enter two rows at the same time with different default values that only the first line to use see?

  Mr President.

  My worm jdev is 12.2.1

  How to enter two rows at the same time with different default values that only the first line to use see?

  Suppose I have a table with four fields as below

  "DEBIT" VARCHAR2(7) , 
    "DRNAME" VARCHAR2(50),
    "CREDIT" VARCHAR2(7) , 
    "CRNAME" VARCHAR2(50),
  

  Now I want that when I click on a button (create an insert) to create the first line with the default values below

  

  So if I click on the button and then validate the second row with different values is also inserted on commit.

  The value of the second row are like the picture below

  

  But the second row should be invisible. It could be achieved by adding vc in the vo.

  The difficult part in my question is therefore, to add the second row with the new default values.

  Because I already added default values in the first row.

  Now how to add second time default values.

  Concerning

  Mr President

  I change the code given by expensive Sameh Nassar and get my results.

  Thanks once again dear Sameh Nassar .

  My code to get my goal is

  First line of code is

      protected void doDML(int operation, TransactionEvent e) {    
  
          if(operation != DML_DELETE)
               {
                   setAmount(getPurqty().multiply(getUnitpurprice()));
               } 
  
          if (operation == DML_INSERT )
                     {
                             System.out.println("I am in Insert with vid= " + getVid());
                         insertSecondRowInDatabase(getVid(),getLineitem(),"6010010","SALES TAX PAYABLE",
                          (getPurqty().multiply(getUnitpurprice()).multiply(getStaxrate())).divide(100));      
  
                         }
  
          if(operation == DML_UPDATE)
                            {                                                    
  
                               System.out.println("I am in Update with vid= " + getVid());
                           updateSecondRowInDatabase(getVid(),
                               (getPurqty().multiply(getUnitpurprice()).multiply(getStaxrate())).divide(100));      
  
                            }                      
  
          super.doDML(operation, e);
      }
      private void insertSecondRowInDatabase(Object value1, Object value2, Object value3, Object value4, Object value5)
                {
                  PreparedStatement stat = null;
                  try
                  {
                    String sql = "Insert into vdet (VID,LINEITEM,DEBIT,DRNAME,AMOUNT) values " +
               "('" + value1 + "','" + value2 + "','" + value3 + "','" + value4 + "','" + value5 + "')";  
  
                    stat = getDBTransaction().createPreparedStatement(sql, 1);
                    stat.executeUpdate();
                  }
                  catch (Exception e)
                  {
                    e.printStackTrace();
                  }
                  finally
                  {
                    try
                    {
                      stat.close();
                    }
                    catch (Exception e)
                    {
                      e.printStackTrace();
                    }
                  }
                }  
  
                private void updateSecondRowInDatabase(Object value1, Object value5)
                {
                  PreparedStatement stat = null;
                  try
                  {
                    String sql = "update vdet set  AMOUNT='"+ value5+"' where VID='" + value1 + "'";                     
  
                    stat = getDBTransaction().createPreparedStatement(sql, 1);  
  
                    stat.executeUpdate();
                  }
                  catch (Exception e)
                  {
                    e.printStackTrace();
                  }
                  finally
                  {
                    try
                    {
                      stat.close();
                    }
                    catch (Exception e)
                    {
                      e.printStackTrace();
                    }
                  }                  
  
                }
  

  Second line code is inside a bean method

      public void addNewPurchaseVoucher(ActionEvent actionEvent) {
          // Add event code here...
  
          BindingContainer bindings = BindingContext.getCurrent().getCurrentBindingsEntry();
                 DCIteratorBinding dciter = (DCIteratorBinding) bindings.get("VoucherView1Iterator");
                 RowSetIterator rsi = dciter.getRowSetIterator();
                 Row lastRow = rsi.last();
                 int lastRowIndex = rsi.getRangeIndexOf(lastRow);
                 Row newRow = rsi.createRow();
                 newRow.setNewRowState(Row.STATUS_NEW);
                 rsi.insertRowAtRangeIndex(lastRowIndex +1, newRow);
                 rsi.setCurrentRow(newRow);
  
                 BindingContainer bindings1 = BindingContext.getCurrent().getCurrentBindingsEntry();
                 DCIteratorBinding dciter1 = (DCIteratorBinding) bindings1.get("VdetView1Iterator");
                 RowSetIterator rsi1 = dciter1.getRowSetIterator();
                 Row lastRow1 = rsi1.last();
                 int lastRowIndex1 = rsi1.getRangeIndexOf(lastRow1);
                 Row newRow1 = rsi1.createRow();
                 newRow1.setNewRowState(Row.STATUS_NEW);
                 rsi1.insertRowAtRangeIndex(lastRowIndex1 +1, newRow1);
                 rsi1.setCurrentRow(newRow1);
      }
  

  And final saveUpdate method is

      public void saveUpdateButton(ActionEvent actionEvent) {
          // Add event code here...
  
          BindingContainer bindingsBC = BindingContext.getCurrent().getCurrentBindingsEntry();      
  
                 OperationBinding commit = bindingsBC.getOperationBinding("Commit");
                 commit.execute(); 
  
          OperationBinding operationBinding = BindingContext.getCurrent().getCurrentBindingsEntry().getOperationBinding("Commit");
          operationBinding.execute();
          DCIteratorBinding iter = (DCIteratorBinding) BindingContext.getCurrent().getCurrentBindingsEntry().get("VdetView1Iterator");// write iterator name from pageDef.
          iter.getViewObject().executeQuery();  
  
      }
  

  Thanks for all the cooperation to obtain the desired results.

  Concerning

• By default static route with recevied BGP default route

  Hi guys;

  I have a problem and I don't know how to find or solve it.

  My chart is attached, please check everything first.

  Secondly, I have a multihomed BGP with two Internet service providers, I received two ISPS via BGP default route.

  Now, I have two types of IP addresses as follows:

  1 - my own prifixes, who has recorded with my ACE

  2 - iPs purchased ISP2.

  I have two networks, the first will contain my own prefixes and second will contain my prifixes ISP2. so I have to go on the internet, static route by default to the ISP2 need and that's fine, now the problem that carry the second defect I received two ISPS in routing however my table if I show ip bgp I see that I received it, but because of favorite and distancing China he disappear the default road statistics.

  so now a network is already online and the second network that contain my own IPs is out of service, of course this second network I need to routed to my isps1 via bgp and when isps1 down, go through ISP2 and I do using weight and as path prefix.

  Thank you

  Hi Nathan,

  With ACB option, you config-route map is your own prefix and set its next hop ISP 1 and 2 PSI when ISP 1 IP is not accessible. Apply the road map to interface with Network1. ACB is processed before routing.

  With option VRF, put the Network1 interface and isps1 VRF1, so it will have separate routing table. Under the vrf1 you static default config with higher AD and the next hop pointing to ISP2 in the global routing table. This will be used when you lose by default isps1. Because separate ridges VRF table routing, so netwoek1 will use the default route in vrf1 to isps1 as primary, the Network2 use ISP2.

  HTH,
  Lei Tian

  Sent by Cisco Support technique iPhone App

• Actions by different default for local vs remote files

  I put the default action for documents for automatic download, I want to keep.
  Is it possible to have different behaviors for local links (file:/foo.pdf), namely opens automatically (for example, using a plugin) instead of 'download' of their new?

  I ask this because I generate a local html file to easily navigate and organize my growing collection of scientific articles, which are stored locally.

  I solved for the moment by creating two different profiles with the corresponding actions of the file. Of course this isn't the best solution, because I need to keep the two instances of the browser running, and I need to use the appropriate forum for local vs navigation remote

• Context change default window

  A user of my application complains that the default context window makes no sense for him. I agree that it does not sese to a user of an application. Is there a way to change this?

  I opened the window context when the application opens.

  Default window is below.

  

  Well, what I ended up doing was creating a case of event that will open the context menu of the first (and only the first) times a user will fly over a control on the façade - instead of open the context menu on the application startup. Given that the mouse is on a default context window control is avoided. Still a bit klunky in code, but it works. I'm not real happy with it, so if anyone has a more elegant solution.

  

  Here is a snippit of code on the block diagram.

  

• WRT54G Router must be the default factory restore to work

  Hello

  I have a router WRT54G 3 version it works fine but suddenly stops working. When this happens, I don't have access to the internet or on the pc connected directly to the router or the wireless-connected devices

  I tried to powercycle the moden router and releasing and renewing DHCP and it does not work yet.

  The solution I found is to restore default settings and reconfigure all the settings wireless again.

  If someone knows why this happens, if there is a better solution would be great.

  Thanks to all in advance

  Might be time for a new router. Ive had a couple of neighbors with these old routers and they seem to be 'exhausted '. Firmware flashing does not seem to help and not sure it's even now available since its so old. If you go with another, not to buy. If you do not need to be able to load 3 party firmware so don't spend a fortune for one who is capable of it. If this wrt54g was enough then look who has tapes times 2.4 and 5 ghz, but in price about $50 dollars range should be good. Good luck

• Form - different default value for each new line needed

  Hi all
  
  I'm a newbie in the APEX and now I am struggling with a problem in the form of tables.
  
  On my page, I report master detail, where the detailed part is created in a table form (I used the Wizard).
  
  Now I want to implement the following:
  
  When I click on the button that adds the line of tabular form, I want to assign the default value for the column 'LOGNO' in my tabular form. Value for this column is table extraction and I this value already stored on the page to display one element 'P210_LOGNO_ACT '.
  
  When I click on the button for one second third etc.) times I would like to set the default for the column LOGNO as LOGNO = P210_LOGNO_ACT + 1.
  
  Y at - it something simple, or is - this difficult to attribute the different value to each new row of tabular form?
  
  Version of the apex 4.1.0.00.32
  
  Thanks in advance!
  
  Jiri

  Inspect your column and find out the name of your column attribute, it must be something like fxx (f01, f02, f03... etc) and use this column instead of f11 (in my case, the name attribute is f11)

  Create a JavaScript function in your page header

  function myaddRow() {
  //perform standard addrow
    addRow();
    //set default value here
  //make sure you replace the P5_X with your page item name
    $s('P5_X',parseInt($v('P5_X'))+1);
    $('input[name="f11"]')[$('input[name="f11"]').length-1].value=$v('P5_X');
  }
  

  Change your button to add a line and call the function above, as shown below

  javascript:myaddRow();
  

  See this example of work http://apex.oracle.com/pls/apex/f?p=46417:5

• You can create a name of different default used for the conversion of lead?

  We use CRMOD for a high volume call center and we have a son with the same name. According to the online help, the first name and the last name for the lead appear"in the default opportunity name field." That works fine, but it would make our lives easier if he does something different, like maybe the first name, family name and POSTAL code, or first name, family name and a timestamp. Is it possible to do? I know that users might do something manually, but then I get all the associated problems.

  Shmonty, at the moment it is only the field of interest is produced. We do not expect to provide customization functionality to the conversion of lead in a next version On Demand.

• Route of the different IP addresses

  I have multiple IP addresses for a virtual server that is running Windows Server R2 2012 and I was wondering if anyone knew any software or all methods to deliver on a different IP address every time that I want. Thank you.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Remove the boot loader of Windows or at least to set a different default charger (UEFI)

  I tried to remove the Windows boot loader or at least the value that it is the last thing in the list of shippers UEFI to try via the BIOS Acer. Nothing sticks. Whenever I reboot, no matter what bootloader, I put it, it will just reset it using the Windows bootloader and try loading something that isn't there. I deleted the windows and the recovery partitions because I don't need them.

  I installed also refined and it sets itself as the default startup at the end of the installation manager. However, as soon as I restart, something in the BIOS Acer (I guess?) is taking control and forcing the Windows boot loader entry in the first place.

  Refined and Grub, both work very well if I select them using F12 during startup, but I want one of them to be the default. How can I get this stick and get rid of the Windows Bootloader?

  I solved it! I had to turn on Secure Boot so that I can get to the "Select a UEFI file as being approved for execution" option (otherwise it would be gray). Then I navigated to the refined bootloader and grubx64 of Debian. I added the two, then turned off Secure Boot. For some reason, that they were still in the boot list priority and I could now move them upward.

  There could be pieces of the loader of Microsoft has left again, but I don't like because now the correct charger gets called first. Wheee! The BIOS version is 1.08 and I would install 1.13 anyway. It seems that only works with Windows, however, the BIOS is impossible to himself from inside the BIOS?

  Edit: Found the InsydeFlash tool. I'll try that. Edit2: Human resources management, is something closed-source they sell at ridiculous prices. So I guess I won't be upgrading the BIOS.

• PIX: Dialin routing through a different VPN VPN

  Here's the scenario: I have 2 PIX firewall on various sites connected to the internet with public (PIX A and B PIX) IP addresses.

  There is a permanent VPN site to site between the two and there is a clear separation between subnets between the two sites (internal network behind PIX is 10.10.4.0/24 and the internal network behind PIX B 192.168.0.0/16).

  I created dialin VPDN access to PIX for laptops to dialin via VPN - it currently allows access to the subnet 10.10.4.0/24 without problem.

  Now - I need these users of portable computers, when connects via the VPN to PIX has to be able to access the other remote site and access the subnet 192.168.0.0/16 of routing through the VPN site to site of PIX B.

  Is this possible? I would be grateful to anyone who helps with that. Thank you...

  This is currently not possible on the PIX as the PIX will not route traffic back on the same interface, it is entered in the.

  This feature will be available in the upcoming v7.0 version, which is currently in beta, so look out for it and you're ready to go.

• Can we have different default gateway for MGMT and vMotion?

  Hello

  We run vSphere 5.1 update 3 Enterprise Edition. VLAN is implemented in our site recently.

  Network administrator assigns 3 VLAN to MGMT and vMotion VLAN10.  It also gives me different for these 2 DG VLAN (there is another local network VIRTUAL for VM).

  When I set up the IP address of vMotion, can I change to a different DG of the vSwitch MGMT?

  Thank you

  vSphere 5.1, no, you can't.

  vSphere 6, yes you can, here vmware now gave us separate stack TCP/IP for vMotion and contributes to the vCenter vMotion cross too.

• asynceventlistener in the tables with the IDENTITY of ACEs ALWAYS GENERATED and GENERATED BY DEFAULT AS IDENTITY

  Good afternoon

  I have a problem when I create an asynceventlistener with the terms GENERATED ALWAYS AS IDENTITY and GENERATED BY DEFAULT AS IDENTITY by creating asynceventlistener table does not respect the creation parameters. I have the following example:
  -asynceventlistener
  create asynceventlistener referrallistener
  (
  listenerclass "com.vmware.sqlfire.callbacks.DBSynchronizer".
  InitParams
  "' com.mysql.jdbc.Driver, jdbc:mysql://localhost:3306 / sqlfdb, user, password"
  True ENABLEBATCHCONFLATION
  BATCHSIZE 100000
  BATCHTIMEINTERVAL 60000
  True ENABLEPERSISTENCE
  )
  groups of servers (dbsync);
  -Start asynceventlistener
  call sys.start_async_event_listener ('REFERRALLISTENER');
  -create table in sqlfire
  create the table sqlftest
  (id int not null not ALWAYS AS IDENTITY GENERATED,
  name varchar (10),
  PRIMARY KEY (id))
  asynceventlistener (referrallistener);
  -create table in mysql
  create the table sqlftest
  (id int not null AUTO_INCREMENT, name varchar (10),)
  PRIMARY KEY ('id')
  ) ENGINE = InnoDB AUTO_INCREMENT = 1 DEFAULT CHARSET = utf8;
  When I insert in sqlfire this replica on Mysql database but is then immediately, without worrying about the BATCHSIZE or BATCHTIMEINTERVAL which is 60 seconds.
  Thanks for the support.
  Guillermo

  Hi Guillermo,.

  This is the version that fixes your issue. We added a system property - Dsqlfire.enable - bulk-dml-batch

  It is disabled by default. If enabled(-Dsqlfire.enable-bulk-dml-batching=true) it will be lot in bulk (not pk) LMD and send commands to DBSynchronizer.

  Name: SQLFire103_39386.zip
  Size: 27,61 MB
  Expires: January 12, 2013
  Download: https://ftpsite.vmware.com:443 / download? domain = FTPSite & id = 12f220841bb632e22f669d5835265b46

  Yogesh-