Acer Veriton N2620G-UC101X and no HDMI output?

Similar Questions

• Acer Veriton N2620G/disconnect keyboard issue

  We set up recently a few new Acer Veriton N2620G thin clients in our call center.  After you have configured an ICA connection, we discovered that if a user presses NumLock and Caps Lock, it disconnects the session... This can happen at any time... login screen, after that they were recorded in during some time... at any time.  We are able to reproduce this on all of our new Acer Veriton N2620G thin clients.  All our thin clients from Wyse existing work perfectly.  We used existing keyboards, we used the keyboards that accompanies the new Acer... same problem.  We configure RDP connections as a test and these function normally... they do NOT disconnect.

  I chatted with the support of DeTOS (OS on the thin client) and their level 1 is zero help.  They tried to transfer me to level 2, but I received a message that they are not open at this time...

  Light client info below:

  Acer Veriton N2620G

  BIOS version 2.15.1229

  Operating system: DeTOS 7.2.2 20130702

  Any help would be greatly appreciated.

  -Brian

  For the record, it was a problem with the version of Citrix ICA Receiver.  Assistance provided an update to the ICA client and he resovled question.

• Live streaming and own HDMI output on camcorder SONY consumer (HDR-PJ650VE in my case)

  Hi all

  I'm trying to figure out how I can live streams, using my Camcorder HDR-PJ650VE. I managed to connect the camcorder to my TV by HDMI out and get the live stream, but the problem is that it also displays the superimposed onscreen. It would be a very useful feature, since it this way, you are able to capture the stream by a jury of consumers capture and share it on Youtube for example.

  I cannot find anything on the manual release of the stream HDMI output and get rid of overlapping info. Is there a key combination or a hidden menu to achieve?

  In addition, it seems very strange SONY would not offer such feature, as for example the PANASONIC offers this good enough consumption walked on models like HC-V520

  Please, let me know if it would be possilb esolving this annoying limitation

  Best regards

  Matteo

  I want to share my discovery because it seems to be valid for all SONY camcorders: to have a clean HDMI out, turn off on HDMI CTR.

  I'm very happy now and I'll start live broadcast!

• A2109 2 problems with networking and an HDMI output

  I had an A2109 for Christmas and have 2 occurring of questions that I need help on.

  1. I was never able to get the HDMI to work. I tried 2 different cables, as well as 2 different TV and when I plug the microphone to the Tablet and the TV, my TV cable don't say no signal source. I got this tablet specifically for the HDMI output and flash support, so I can watch sports on the internet on our main TV.

  2. in the last week or so when I wake up in the Tablet, my apps does not connect to the internet. In the taskbar it shows that I am connected to the network. I open up chrome and you get a DNS error. To solve this problem, I turn off the Tablet and then turn it back on. This happens whenever I wake up.

  I've not being updated to JB again because I don't want to lose the capabilities of Flash

  As I have a follow-up has been able to solve these two issues.

  HDMI: the cables, I bought two bad ones were apparently. I bought another and that he had "snap" in as well and the TV started to show what was on the shelves. How lucky I am with this one?

  Network: Restarted my router and after a few days there were no problem.

• Qosmio X 500 and an HDMI output does not automatically

  Sorry for my English...

  Hello.

  I have a Qosmio x 500 recently that runs on Windows 8.1

  Previously, when I plugged the PC to TV hdmi cable, I had (Samsung TV), a beep on the PC, binding and done automatically? the TV is on (if it was in standby).

  I could even control the PC with the TV remote control, put a film, break, etc... Super convenient!

  Source indicated on the TV Anynet + pc Toshiba.
  And when I switched with the TV remote control at the TV, the screen of the PC is turned on.
  *
  Off, despite attempts repeated at least 5 software (drivers)? Different certified Toshiba HDMI, I didn't do it and I have to manually switch to see the PC on the TV (choose the HDMI source on the TV).

  HDMICtrlMan is a folder where, after installation, there are:
  ChangeOutput.exe
  HCMSoundChanger.exe
  HDMICtrlCfg.exe
  HDMICtrlMan.exe

  But nothing works!

  I've also updated the audio and video driver: gforce gts 360 m
  But now I want!

  And I don't know the progression of the computer when you connect an HDMI cable (depending on the graphics chip?).

  If someone has an idea or experience of this problem, thanks in advance

  You have installed Windows 8.1 on Qosmio X 500 but the Win 8.1 is not possible on this model of laptop and so there is no drivers Win 8.1 available.

  The page of the Toshiba UE driver provides control manager HDMI and remote Manager for Win 7.
  HDMI Control Manager is required for the HDMI controller and TOSHIBA Remote Control Manager improves the support for a remote control on your Qosmio X 500.

  I guess that you are not able to use all the features of laptop HDMI due to lack of software for Win 8.1.

  Maybe you can try the software and drivers Win 8.1 released for other series of Qosmio as Qosmio 875

• F5 will not read a map and will not HDMI output

  Hey guys, I'm new here and new to F5. I just got me second hand F5 and opportunity SXS pro + card (64 GB) and the camera is not picking up. When I insert the card, turns bright red media access, and then I get locked out settings. I get a cannot continue message when I try to do something. I don't get a message to format the card, and I don't think I can access the menu to format the card manually because I don't have a HDMI output power on my HD Gratical Zacuto. Any idea of what this could be the cause?

  
  

• My AMD HDMI Output is static and gray out

  I can silence the noise lower volume on the stereo Mix High Definition Audio Codec. However, an HDMI output my AMD is greyed out and static, or if I understand others complain; IS NOT PLUGGED IN. What can I do to solve this problem. This is a problem when I open the stereo Mix High Depfinition Audio Codec, a screaming noise let me the depth and volume, he eats everything.

  My system: Windows 7

  HP high Lop - A6 - 3400M - APU with Radeon HD Quad Core graphics card - 6.0 GB RAM - AMD Radeon HD 6520

  Thanks in advance for your help.

  Hello

  Try to install the driver in the link given below to restart the machine and check if the device works very well.

  Link
  

• Audio default HDMI output goes to "not connected" when the receiver is turned off and does not reset as defdault when the receiver is turned on

  I have an NVIDIA HDMI output connected to audio receiver 7.1 Onkyo TX - NR. 818.  It is defined as the default output.  When connected, it works well.  When I turn off the receiver, the output goes to "not connected" and scene of my returns instantly becomes the default.  When the monitor is switched on again, the HDMI out remains "not connected" and audio is directed to the monitor.  If I unplug the pc HDMI cable and reconnect it, the HDMI from the receiver instantly responsive as default device.  How can I stop her from doing this change, whenever I have turn off the receiver?

  Hello

  Try this: http://h30434.www3.hp.com/t5/Notebook-PC-Sound-and-Audio-e-g-Windows-8/Nvidia-HDMI-Output-quot-Not-plugged-in-quot-Audio-not-going/m-p/1001191#M16981

  Good luck.

• Support bi-ecrans Veriton N2620G

  Greetings,

  I was hoping someone might be able to answer a quick question, I have.

  We hope that buying the device mentioned in the topic but need to run two monitors. I know that the device has two DVI - I and HDMI support but will it output to two monitors at all?

  A press release here: http://us.acer.com/ac/en/US/press/2012/42821 indicates that it will, but if someone has personal experience a response would be much appreciated.

  Thank you very much!

  Concerning

  Liam

  As you have noted, the information clearly shows that the Veriton N2620G is capable of two monitors.

• I want to stop Dell Dock d3100 Audio HDMI output.

  I recently bought a d3100 dock and I use it to connect my Inspiron 13z with Windows 8.1 to multiple devices, including an HDMI monitor and stereo speakers.  It turns out that my monitor has built-in speakers and does not allow them to be disabled or cut.  They sound terrible, so I'd like to stop to send the audio signal to them.  Unfortunately, windows detects the Dell dock as a single USB audio device and I don't have the ability to send audio to the stereo output 3.5 mm without sending it also both HDMI outputs.

  If anyone has a suggestion on how to use the HDMI output for video without sending audio to the speakers on my monitor, please let me know.  There are HDMI cables that have an audio connection?

  Thank you, Chris.  It is not a Dell monitor that I'm connected, I use an Acer B273h.  I tried to watch the sounds-> playback settings in Windows.  The problem there is that the d3100 Dell presents itself as a single USB audio device.  There is no distinction between the 3.5 mm stereo output and HDMI audio output.

  However, I found a solution.  I remembered that HDMI and DVI have the same video encoding, and also, my monitor has a DVI input.  So, I picked up an HDMI cable to DVI, which now sends only video to my monitor.

  Problem solved!

• HDMI output have suddenly stopped. Pavilion a6340a

  Hello

  I posted here in hope that someone can give me some advice.

  The system in Question is:

  • HP Pavilion a6340a desktop computer. Double heart
  • Vista 32 bit SP2.
  • NVIDIA GF8400GS
  • COMPRO Video mate Vista TV Capture card.
  • 2 GB of RAM.

  It is a bit of an older system, I guess, but it plays well as a HTPC for a while now. It has a small LCD monitor connected via the standard connection and a large flat screen Toshiba TV connected via HDMI. He did a great job.

  Today, the HDMI output just stopped. The Toshiba TV again to survey/is visible in the Nvidia Control Panel and the Vista Control Panel when it is connected to the HDMI. the implementation of the features of multiple monitors are available. But there is nothing happening on TV.

  Things has tried so far.

  • Two different Cables HDMI - nothing.
  • Connected my Pavilion Notebook DV6 on the same HDMI port on the TV - works fine.
  • Installed the latest driver from Nvidia - nothing.
  • Tried all the three HDMI ports on the TV - nothing.
  • Physically, shot the video card in the computer, he dusted off and reassembled it. -Nothing.

  I don't understand. Could this be a processor problem, or I have to pay for a new video card? Is it possible to test the output from the HDMI port with a multimeter or something? I do not understand why it would stop just like that. I just installed Vista SP2 a few weeks ago, but it was working well after I did.

  Any help with this would be greatly appreciated. The system is out of warranty, of course, but it has been a great HTPC for me. I stuck a blu - ray inside player and I was about to give him another 2 GB of RAM.

  Kind of useless now, without HDMI.

  IM at a loss. What else can I do to verify that Exchange of the graphics card?

  Hello

  The short answer is: replace the video card VNvidia GF8400GS. If you happen to have another video card around laying which has an output and HDMI, then install it for a test. It's the fastest way to solve the problem.

  Best regards

  EICO

• Re: Satellite U400-145: no option to select HDMI as HDMI output default

  Hello

  I followed the instructions in the manual its leader to the topic on the HDMI output.
  However, when I go to the sound control panel, there is no digital output device (HDMI) listed only the Conexant Chairman and SPDIF outputs.
  I tried the default SPDIF output, which did not work.
  The HDMI works fine for the image, but the absence of the sound through it is driving me crazy.

  I'm running VISTA (fully updated) on a U400-145

  Someone at - it ideas how I can get the HDMI to appear as an output option?

  Andy

  Hello

  Go to the control panel-> Sound-> playback tab
  There, you have to click to the right.
  Then mark the options; Show all disabled devices
  Then you should see the HDMI interface.
  Now, you could activate and chose as the default value.

  Welcome them

• Qosmio G30-161: Cable for HDMI output on DVI input

  I have my G30-161 "HDMI" output as well as the analog out. I began to find a cable to connect it to the DVI to a TFT monitor, but seem to have trouble identifying which is the end "HDMI" cable connection. Does anyone know the formal classification of HDMI connector (or a UK power cable) I can be sure I buy the right cable?

  Thank you very much

  Phil

  Hello Phil

  Put? HDMI-DVI adapter? as keywords on Google and you'll find enough online shops where you can order one.

• Satellite L850/0C9 and resolutions HDMI

  Hi all.

  Ive recently bought a 9 L850/0c and I can not get the HDMI output to 1360 x 768, which is the native resolution of my panels.

  Using a vga cable that I can output to 1360 x 768, but not with HDMI
  Any ideas?

  Windows 7 Home Premium 64-bit

  >... I can not the HDMI output to 1360 x 768, which is the native resolution of my panels.
  > Using a vga cable that I can output to 1360 x 768, but not with HDMI
  Maybe my English is not the best but I put t understand you not at all. In the first sentence you can get good resolution with HDMI but in second, is not possible. I confused m.

  Can you please provide more information about your problem? What is the problem here?

• Satellite U400-11U: no sound with HDMI output

  Hi all

  I am the proud owner of a model of satellite U400-11U PSU40E running with Windows Vista.
  Recently, I tried to view a video on my TV. To do this, I used the HDMI output of the laptop connected to the TV.

  I took care to connect the cable to the TV and only after to the laptop.
  Then use the quick access key (Fn + F5), poster image on the TV.
  Unfortunately, there was no noise.

  After some googling, I discovered that I needed to activate the HDMI audio output via the control panel of the sound.
  Unofrtunatly, when viewing, I have found no output Audio HDMI, but only speakers and another exit (whose name I forgot--sorry).

  I tried to update the video and HDMI audio drivers (I noticed that there is a HDMI audio driver in the perpipherals system, which was considered 'work' of Vista), but it changed nothing.

  So, what can I do to activate the audio output over HDMI?

  Hello

  Please see this FAQ from Toshiba:
  http://APS2.toshiba-tro.de/KB0/TSB9401B00001R01.htm

  You will find an instruction how to solve this problem... it s about Qosmio G30 but I think it should work on U400 too...

  The point is that you must set the S/PDIF audio output by default!

  And don t forget to RESTART the laptop after the change was made.

  See you soon