Acquisition Wizard OR... How to control the parameters (exposure)?

Similar Questions

• Satellite M100 with Debian - how to control the power and the cooling fan on

  Hey,.

  I M100 and I installed debian, works very well, but there is a problem.
  Cooling fan turns on the top speed of all time. I m not shy on unix.
  How can I control cooling fan?
  How to control the power to the laptop?

  Hi mate,

  have you ever heard of the toshutils? I highly recommend trying these tools. Just google for toshutils and you'll find a few nice applications. Should usually be included in the distribution you have, also, I would check with 'apt - get search toshutils.

  See you soon

• How to control the speed of the fan on Satellite A660 - 11 M?

  Please any body know how to control the fan speed its always of 69% and making bad noise and the cpu use is 3% no to treatment high I try avancΘs power but still runing high speed

  Advanced power settings go to Toshiba power Saver saver > cooling method. There are minimum level. Change back to your power management for a second power plan, and the fan must be much quieter.

  I did it on my Satellite A660.
  Before changing PC Toshiba, health monitor showed CPU temperature 41% and the speed of the fan was 67%. After changing the method of cooling fan speed is 0%.

• How to control the output voltage?

  Good time after some time can get the output voltage, but this value is alwayscontinuous. How to control the voltage output through a Boolean? In

  in order to get this tension when I want to.

  Greetings.
  Hugo Santos

  Hi Hugo,.

  If you use a LabVIEW project, you must set the time of sampling in the properties of the node (see SamplingInterval.png). But this time to refresh the data should be high enough. If you take into account this update of time trying to control your way out.

  Kind regards

• How to control the ws appeal period

  Hi Experts,

  I use bpm12.1.3, when the process web service using the service task, how to control the delay?

  Best regards

  Hi user,

  There is a nice blog on wait times. It's about 11g, but it also applies to 12 c.

  https://technology.AMIS.nl/2011/11/18/timeouts-in-Oracle-SOA-Suite-11g/

  Antonis

• How to control the movement of the oam in muse & just play once the proposal?

  How to control the movement of the oam in muse & just play once the proposal?

  This must be configured during the creation of the oam, no Muse, but the animated application you use.

  Thank you

  Sanjit

• How to control the length of the field... ?

  Hi all
  
  
  All by providing payment details in the payment.jsp... If we use a credit card which has 16 digits then, how to control the ground to allow the entry of 16 digits only... ?
  
  
  Thank you
  Vishnu

  Write javascript to enter only numbers and set the "16" size = attribute to limit the size to 16 digits.

  JavaScript can be like that of google.

  function isNumberKey (evt) {}
  charCode var = (evt.which)? evt.which: event.keyCode
  If (charCode > 31 & (character code < 48="" ||="" charcode=""> 57))
  Returns false;

  Returns true;
  }

  -Kiss

• How to control the length of field, select items list to 4.2 page

  I apologize in advance if I ask what is obvious, but simply, I couldn't get a response yet:
  
  I would like to know how to control the length of the elements of the type selection list page 4.2
  (as for a normal textfield: in the case where the content is longer than simply not all appears on the screen)
  
  help much appreciated
  see you soon
  Wim

  WimDeGroot wrote:
  I apologize in advance if I ask what is obvious, but simply, I couldn't get a response yet:

  I would like to know how to control the length of the elements of the type selection list page 4.2
  (as for a normal textfield: in the case where the content is longer than simply not all appears on the screen)

  Normally the browser automatically resizes the selection list based on the content.

  What version of the browser / do you use?

  What theme?

  What model page/region?

  What form/article layout?

  What content does not match?

  (Basically the best way to get help with problems of this type is to reproduce on apex.oracle.com and see us actually...)

• How to control the service console in ESX?

  How to control the service console in ESX?

  http://www.Petri.co.il/5-critical-VMware-ESX-CLI-network-commands.htm

  http://download3.VMware.com/VMworld/2006/mdc9694.PDF

  http://download3.VMware.com/VMworld/2006/mdc9807.PDF

  http://download3.VMware.com/VMworld/2006/tac0028.PDF

  http://download3.VMware.com/VMworld/2006/tac9689-b.PDF

  http://download3.VMware.com/VMworld/2006/labs2006/VMworld.06.Lab04-performance-manual.PDF

  http://www.RTFM-ed.co.UK/

  PS: If you have found useful messages then please leave a few points

  André

• How to control the number of fields in the Advanced mode in &lt; af:query &gt;

  Hello
  
  How to control the number of fields in the Advanced mode in < af:query >?
  
  Say I have 20 fields in my table, and I created a view of criteria with 2 fields. This would work perfectly in basic mode. But in Advanced mode , the choice of fields is possible by clicking on the Add fields button. I didn't have the customer to search with all 20 fields. Only 10 fields must be listed in the Advanced Mode, even if there are 20 fields in my table.
  
  How can I control the list of fields in ADDFields button?
  
  Any ideas?
  
  
  
  KR

  You can uncheck the contestable ownership of attributes that you must not appear in the Advanced Mode (but they will not appear in the other modes too!) or by programming the value the same as those mentioned here.

  http://adfcodebits.blogspot.com/2010/11/bit-27-setting-view-object-attributes.html

  Also, you can hide the button AddFields as suggested here - http://www.notjustjava.com/2011/12/cool-tips-to-showhide-components-of-the-query-control-of-adf/

• How to control the sort during the download or export

  can't figure out how to control the sort order when you export on hard drive or upload to smugmug.  have photos arranged in the way I want to do in LR and then when I export to hard drive they are ordered by file name.

  When it comes to your hard drive, your operating system determines the file order.  No matter what you do in Lightroom, the OS will be based on your choice determin how files will be ordered. If you want them to be in order, you should probably adopt a convention of name change in your export that names the exported files similarly followed by a sequence number.  File01, folder 02, etc. Then set your viewer (Finder/Explorer) to sort by file name in ascending order.

• How to control the number of lines of text below the image in the slideshow module?

  Lightroom 3.3

  How to control the number of lines of text below the image in the slideshow module?  I have an image with 36 words in the caption field which exports like two lines GOOD.!  I have another image with 57 words in the field of legend who runs the page and shows only a VERY BAD line.  With 57 words I can't do the single-line text box small enough to keep the text does not spread out of the page.

  Ideas?

  On the Mac platform and I expect similar under Windows, just hit enter or return key will not help. Instead, you will have to hit the keys Ctrl + Enter or Ctrl + return. This forces a new line. Windows may use a different modifier key. The screenshot below shows that it is possible. Unfortunately, you need to add the text via the caption or Description field in the library module.

  

• How to pass the parameters or values film double hollow?

  Hello

  I create a game in Flash 8 with 2 AS and I have some questions to ask.

  First of all, I'm stuck for 2 days to create a tower Laser beam to the target.

  I searched the internet for solutions but I can't really find one, so I'll try display of questions myself...

  First I tried to create, and the effectHolder in which each laser beam has been created, because it seems I can create only one line in each movieClip...

  _root.duplicateMovie(effectHolder_mc , "effectHolder_" + this, _root.getNextHighestDepth());
  v = a = _root["effectHolder_" + this];
  ray.onEnterFrame = function() 
  {
  v.clear();
  v.lineStyle(1,0xFF0000,100);
  v.moveTo(this._x, this._y);
  v.lineTo(creep._x , creep._y);
  v.text = "True"
  }

  It's triggered eveytime, she was a target.

  With each turn that triggered a laser that I created, it became more than offset, so I tried selfdestructing after some time.

  this._alpha -= 10;
  if (this._alpha <= 0)
  {
       this.removeMovieClip();
  }

  But he did not actually work, so I tried another solution. I tried to give each MovieClip ("Laser"), duplicate code that creates the laser beam.

  onClipEvent(load)
  {
       this.fx = from._x;
       this.fy = from._y;
       this.tx = to._x;
       this.ty = to._y;
  }
  onClipEvent(enterframe)
  {
       _root.dmg.text = "From: " + fx + "," + fy + " To: " + tx + "," + ty; //I used this on a textbox to see if parameters are transmited. But they were all 'undefined'
          this.clear();
       this.lineStyle(1,0xFF0000,100);
       this.moveTo(from._x, from._y);
       this.lineTo(to._x , to._y);
  
       this._alpha -= 4; 
       if (this._alpha <= 0)
       {
            this.removeMovieClip();
       }
                                
  }

  The problem is that I did not know how to pass the coordinates of the tower and the target to the MovieClip so that it knows where to create the line.

  X++;
  duplicateMovieClip(_root.Laser, "Laser" + X, X,{from._x,from._y,to._x,to._y});          
  g = _root[_root.Laser + X];
  g.fx = from._x;
  g.fy = from._y;
  g.tx = to._x;
  g.ty = to._y;

  Please leave suggestions on how to send the parameters or values for the created clip, or an idea of the creation of this line ("beam") for each tower, without so much trolling.

  Thank you

  Chris

  What is the trigger of v's _alpha decrease?

• How to display the parameters of the control units

  Hello

  I have a simple request, associated with display units in controls.

  The procedure is a right-click on the control > select the display format > advanced editing mode. Because a field called string format, I give here the units related to the parameters. Now, I must enter "S2" in this area. How to give the value of the suffix.

  Please help me.

  Kind regards

  Girl S.

  After Sec enter \B2 in ' display \'-codes and switch back to the normal display.
  Ref: https://forums.ni.com/t5/LabVIEW-Idea-Exchange/Subscript-and-superscript-fonts/idc-p/920208/highligh...

• How to control the fan on Portege Z830?

  I have a Portege Z830 with BIOS version 1.7 and I am very upset by the noise of the fan.
  I was wondering if it is possible to control the fan noise, so I started to experiment with a little utility called SpeedFan. I put in place so that the fan will not turn on until the temperature of the processor exceeds a defined number. But it does not; It seems that the BIOS is ignorant these parameters.

  So my question is how can I set the fan to work my way?

  There are not many options to control the fan.

  The fan is controlled by the BIOS. The fan table that is stored in the BIOS contains information how a cooling module must operate.

  As mentioned by Liam, you can change the settings of power plant of Win 7 more battery as a way to minimize the performance of fans
  This should help a little...

  In other http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=65068 thread, I found a neat trick of the last user... He replaced Z830 fan with the fan of Z930 origin...
  It worked.