Acrobat Crash - memory could not be read

Similar Questions

• Acrobat and Reader 8.  When you try to print, the memory could not be "read".

  A user (without local administrator rights) does a job batch of Microstation and exported all his drawings in pdf format.  They open correctly in Acrobat 8 and Reader 8.  When he clicks on the button print, it gets the error below.  When I login with local administrator rights, I can print these accurate pdfs very well.  Here is the event/error log entry.   Any help would be greatly appreciated.   It runs Windows XP SP3.

  Event type: Information

  Event source: Application Popup

  Event category: no

  Event ID: 26

  Date: 27/03/2012

  Time: 17:27:46

  User: n/a

  Computer:

  Description:

  Application popup: 2012-03-27 C6-01. PDF - Adobe Acrobat Professional: Acrobat.exe - Application error: the instruction at "0x0436959a" referenced memory at "0x00000d28". The memory could not be "read".

  Click OK to terminate the program

  Click on CANCEL to debug the program

  We tested with another nonadministrator account and Acrobat worked fine.  Therefore, the problem was in the user's profile.  We just its data saved, deleted the old profile and did reconnect.  This has created new profile.  Acrobat works beautifully.

• Spooler subsystem app has a problem and needs to close and... .instructions @ 0x0041003d referenced memory @ 0x0041003d memory could not be read.

  I have windows xp svc pack 3. I have 2 printers hp psc 2410, samsung ml2010.  I've never had a problem until recently, and now I get 2 messages all the time... the spooler subsystem app has a problem and needs to close and... .instructions @ 0x0041003d referenced memory @ 0x0041003d memory could not be read.  Whenever I try to print my computer crashes. I tried to uninstall and reinstall the two printers.  no luck.  I tried mrfixit and when it comes to the printer part, mrfixit seems stuck in a loop and it is doing nothing more than an hour.  no luck.  I paid for norton antivirus, thinking it was a virus. no change.  paid for advanced system optimizer. no change.  Now that?

  Hi MarthaForner,

  You can read the following article and check if it helps.

  You cannot print and you receive the error message "Spooler subsystem app has encountered a problem and needs to close."

• Message error "memory could not be Read.

  I am running windows XP SP3, and whenever I play the multiplayer mode of the game (battlefield bad company 2), it crashes with the error: «the instruction at 0x0116df37 referenced memory at 0x0000000b0.» Memory could not be read. »
  Can someone help me with this problem? Essentially, it makes my game without value. :(
  Oh, and the guys over at support of the environmental assessment have been next to no help.

  I would also add that the single player mode for this game has worked smoothly, without any error.

  Hi MacRoss_14,

  ·         Have you had this problem with the game earlier?

  Method 1: Check to see if there are patches available for the game. Log on to the Web site of the manufacturer for the same thing.

  Method 2: Try to uninstall and then reinstall the game and check if this may help.

  In addition, you can check

  http://Forum.EA.com/eaforum/posts/list/660/380660.page

• "SVCHOST memory could not be read" preventing Windows startup.

  When I turn on the laptop it crosses starts and when the logon Windows page happens I get an error.

  SVCHOST. EXE 'Instruction at '0x001c623c' referenced memory "0x0000003c".  The memory could not be "read".  Click OK to finish.

  After that, I am unable to connect.  When I try to open a session on the system hangs and must be turned off.  If I try to start in safe mode it crashes as well.  All this came after I installed Norton.  I had just removed a virus ' HDD more "and the computer had no problem starting.  After that I removed the HARD drive and I rebooted with the problems and installed Norton.  He started giving me problems when I rebooted after the installation of the Norton.

  The laptop is a Toshiba XP.

  We ended by wiping the machine and start from scratch.  It was a pain because we had to re - install all the other programs that was using the computer.

  In any case, at the time, that the computer has been infected, there was only the McAfee that came with the computer.  He also had Spybot but it was not configured for continuous operation.    After that I followed the instructions to get rid of the Plus HARD drive, I've removed McAffe and then installed the Norton.   I have never connected to the internet after you remove McAffe or during the installation of Norton.  After installation of Norton I did the reboot and it's then that SVCHost problems appeared.

  In any case, consider this problem fixed, thanks to those who offered help.

• Why do I get the jqsnotify.exe - Application Error Application error. The memory could not be read?

  Why I get this error message every time I opened Firefox saying: jqsnotify.exe - request error and then at the end of the line, he says: the instruction at '0x5ff3d322' referenced meory to '0xe41203c3 '. The memory could not be "read". Click on OK to terminate the program.

  This has happened

  Each time Firefox opened

  == I recently renewed and installed CA Security Suite and Firefox uninstalled and reinstalled again.

  http://www.java.com/en/download/help/quickstarter.xml - what is Java Quick Starter (JQS)? What is the advantage of running JQS? -6.0

  Disable Java Quick Start extension: Tools > Addons > Extensions
  Control Panel > Java > Advanced tab > various > Java Quick Starter (disable)

• App error: instruction at 0x7c911389 referenced memory at 0 x 00000010 memory could not be read.

  Desktop HP Pavilion (a710n) keeps making the message: the instruction at 0x7c911389 referenced memory at 0x00000010. Memory could not be 'read' click ok to terminate the program - every time that the computer shuts down and many other random times. It prevents downloads to install now?

  Windows 8 is different from its predecessors.  This site contains tutorials for several new features for Windows 8. Once I adjusted to the differences in Windows 8, I found that I enjoyed the operating system.  Keep in mind that the Windows 8.1 is available in beta form if you want to see what can come from the changes.  If you choose to test Windows 8.1, don't forget to do your first recovery disks, then you can return to a factory State if you do not like Windows 8.1.  More information on Windows 8.1 overview can be found here.

• Application error memory could not be read 0 x 00000014

  Hello world

  I would like to know if any of you have experienced this problem.

  I run an application built by me in a computer with LabVIEW Run-time 9 in which I display a PDF file using an ActiveX control:

  

  The target computer is running Adobe Reader 9.0.  Everything works perfectly until the application is closed.  From time to time (almost most of the time), I have the following error in windows:

  «Application error: the instruction at "0x0ffd609c" referenced memory at "0 x 00000014".»  The memory could not be "read".  Click OK to complete the program."

  Try to find the reason why, I found a few forums who say that the reason is a bug in Adobe 9.0 (in fact, I tried to run the application with Adobe Reader 8 and I can't make the same mistake).  Someone of you have had this error before and found a solution?  These links were not on LabVIEW and I have no idea how to get around this problem.

  Any help is happy.

  Thanks in advance.

  Dani

  Who may be interested, I managed to find a workaround for this bug in Adobe Reader 9.0.

  It seems that, somehow, LabVIEW and other programming tools, hang around with this version of Adobe (I guess it is because of this bug) when the reference to closing Adobe created by the ActiveX container.  That the solution will be closing "by hand" this reference, then saying Windows to release the whole relationship between the application (LabVIEW for us) and Adobe.  The idea is that when we did with VI which displays the PDF via ActiveX, we should close the reference to the ActiveX control, close the reference to the VI, and:

  -process all Windows messages currently in the queue of messages (.NET: System.Windows.Form.Application-> DoEvents)
  -run CoFreeUnusedLibraries in "ole32.dll".

  

  I hope this information can help someone, I lost too much time to understand this (eventually find the answer in an Adobe forum!)

  P.S. P.S. for those who program in c#, check out this link; He was my source.

• The instruction at "0x7c9105f8" referenced memory at "0x08c60010". The memory could not be 'read'.___Click on OK to terminate the program.

  My problem is that whenever I try to open a game, I get the error message that

  "The instruction at"0x7c9105f8"referenced memory at"0x08c60010". The memory could not be "read".

  Click on OK to terminate the program. »

  and I have to close the program.

  Hi Dani,

  1. who is the edition of Windows that is installed on the computer?
  2. what game you try to play?

  Try these steps and check the result.
  Step 1: Run the memory diagnostic tool
  a. see diagnosis of problems of memory on your computer
  b. Once you correct the errors, check if the problem persists.

  Step 2: Check the game sellers website to see if there are updates or patches for the game and install it.

  Step 3: If the problem persists, uninstall and reinstall the game and then check the result.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Memory could not be read after installing KB982524

  Has anyone understood why a happends "memory could not be read question" after you have installed this hotfix rolled-up/cluster .net when you exit an application? I'm guessing that it is used by another process. If so, are there plans to deploy a fix for this patch? If not, other than uninstalling it (KB976576 is the question), is there a workaround?

  Data sheet:

  Operating system: Windows Server 2003 sp2 but they have seen this problem on XP and Vista (all 32 bit)

  Antivirus: AVG 8.5... NOTE: some customers use it and others are using Norton and McAfee.

  NOTE: When you remove this patch, all the apps work as expected.

  Hi Gladius,
   
  Your question of Windows is more complex than what is generally answered in the Microsoft answers Windows 7 forums. It is better suited for the IT Pro TechNet public. Please post your question in theTechNet Forums.

  Kind regards
  Syed - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• QuickBooks error message: qbw32.exe - Application error: the instruction at "0x56461f49" referenced memory at "0x02ec4360". The memory could not be "read".

  I am running Windows XP Professional Version 2002 w/SP3. QuickBooks Pro 2008 is installed on it. Whenever I close the program, I get an error message: qbw32.exe - Application error: the instruction at "0x56461f49" referenced memory at "0x02ec4360". The memory could not be "read". I have absolutely no idea of what that means. The message will only appear when it terminates the program and does not do. Any info is greatly appreciated.

  Hi stickman397,

  This error occurs during the installation of QuickBooks is damaged. To resolve this problem, follow the steps in the link below:

  http://support.QuickBooks.Intuit.com/support/pages/knowledgebasearticle/1008533

  Kind regards

  Imran M

  Microsoft technical support

• When I start my pc there is a notice:-"the instructions of the '0x00402c60' referenced memory could not be read.

  How can I stop the view on my screen when I start my pc that says that the memory could not be read?

  Hello

  1 did you changes to the computer before the show?

  2 are you able to start the computer on the desk?

  3. What is the brand and model of the computer?

  Method 1: Run the fixit diagnosing memory problems

  http://go.Microsoft.com/?linkid=9759543

  Method 2: To resolve this problem, increase the size of the swap file:

  Click Start, right-click my computer, and then clickProperties.

  In the System Properties dialog box, click the Advanced tab.

  In the results pane, click settings.

  In the Performance Options dialog box, click the Advanced tab.

  In the virtual memory section, click change.

  Change the initial size value and the value of the maximum size to a value above, click onthe valueand then click OK.

  Click OK to close the Performance Options dialog box, and then clickOK to close the System Properties dialog box.

  See also:

  Maintenance tasks that improve performance

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/maintenance-improve-performance

  Please let us know the result.

• memory could not be read

  When starting the computer and then create only I get this

  Instruction at 0x00402c60 referenced memory at 0 x 00650044 memory could not be 'read '.
  I have no idea. Only, when I start the computer

  Hi Spag,

  1 did you changes to the computer before the show?

  2 are you able to start the computer on the desk?

  3. What is the brand and model of the computer?

  Method 1: run the fixit for Memory problems diagnosis

  http://go.Microsoft.com/?linkid=9759543

  Method 2: To resolve this problem, increase the size of the swap file:

  Click Start, right-click my computer, and then click Properties.

  In the System Properties dialog box, click the Advanced tab.

  In the results pane, click settings.

  In the Performance Options dialog box, click the Advanced tab.

  In the virtual memory section, click change.

  Change the initial size value and the value of the maximum size to a value above, click on the valueand then click OK.

  Click OK to close the Performance Options dialog box, and then click OK to close the System Properties dialog box.

  Additional information to improve the performance of XP:

  Maintenance tasks that improve performance

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/maintenance-improve-performance

  Please let us know the result.

• The memory could not be "read".

  I'm game, and it was show below. How to solve it?

  [The instruction at "0x10073f24" referenced memory at "0x0d8e91b8". The memory could not be "read".]
  [Click on OK to terminate the program]
  Help, please

  Hello
  Method 1: SFC (System File Checker) Scan
  a. locate your Windows XP installation CD
  b. go to start, then run and type SFC. EXE/SCANNOW
  (c) the program may (or may not) ask your Windows XP installation CD - please insert it at the command prompt. If she won't ask for the CD that this means that it was not necessary to replace all the files.

  Method 2:
  Check the hard disk for errors.
  See the following site:
  How to perform disk error checking in Windows XP
  http://support.microsoft.com/kb/315265.
  Note: When checking out a disk for errors, if bad sectors si des secteurs defectueux sont are found then the system tries to repair sector. All data may be lost. So make a backup of the data.

• "The instruction at 0x6c371c9d referenced memory at 0 x 00000038. The memory could not be read. "when I go to create a new pdf of the file after the installation of updates

  Original title: "the instruction at 0x6c371c9d referenced memory at 0 x 00000038. The memory could not be read. »

  I worked on a design project for a few days I made several pdf files from. During the night, Windows ran and installed the updates on my computer. (My design file was open at the time). Now, when I go to create a new pdf of the file, I get the following error code: "the instruction at 0x6c371c9d referenced memory at 0 x 00000038. The memory could not be read. »

  HELP - I can't find a solution.

  Thank you!!

  Hello

  1. what program you use for your design project?

  2. did you run the repair of this program?

  Perform System Restore on the computer and check if that helps.