Why do I get the jqsnotify.exe - Application Error Application error. The memory could not be read?

Similar Questions

• Error: "error btstackserver.exe: 0x0054be37 error, 0x000001ef memory could not be read" before the shutdown.

  Original title: Btstackserver causing error computer turns off.

  It began on 15 September after downloading a video game and starts when you try to run the game, but has since broke outside to play the game, even after I uninstalled it.

  The error message that appears before the judgment reads: "" btstackserver.exe error: 0x0054be37 error 0x000001ef memory could not be read. ""
  My laptop close instantly and is unable to start for a few minutes at least. Once a blue screen occurred on startup asking to allow the troubleshooting begin, that I authorized. There is however, no solution found by the computer. I tried several solutions, including running a system defrag and cleanup and uninstall the game. As part of my laptop gets unusually hot at shutdown, I also inspected the area and cleaned the dust of him in an attempt to eliminate possible physical obstructions.
  My laptop is an Asus N61jq age of two years and I run Windows 7 x 64.
  Any help is greatly appreciated.

  After you perform a clean boot several times, I determined the problem with the Steam client set. I also seek to their site of support for similar problems and followed through the steps of support described in this page: https://support.steampowered.com/kb_article.php?ref=1274-UOHK-5653

  For now, this seems to have fixed the problem, but I'll post here if the problem persists.
  Thank you very much for the help!

• QuickBooks error message: qbw32.exe - Application error: the instruction at "0x56461f49" referenced memory at "0x02ec4360". The memory could not be "read".

  I am running Windows XP Professional Version 2002 w/SP3. QuickBooks Pro 2008 is installed on it. Whenever I close the program, I get an error message: qbw32.exe - Application error: the instruction at "0x56461f49" referenced memory at "0x02ec4360". The memory could not be "read". I have absolutely no idea of what that means. The message will only appear when it terminates the program and does not do. Any info is greatly appreciated.

  Hi stickman397,

  This error occurs during the installation of QuickBooks is damaged. To resolve this problem, follow the steps in the link below:

  http://support.QuickBooks.Intuit.com/support/pages/knowledgebasearticle/1008533

  Kind regards

  Imran M

  Microsoft technical support

• ehRecvr.exe - Application error the instruction at "0x53801d4f" referenced memory at "0x00000000". The memory could not be "read".

  Message MSVidCtl broadcast system receiver: ehRecvr.exe - Application error the instruction at "0x53801d4f" referenced memory at "0x00000000". The memory could not be "read". This error will not go away and I can not disable or delete the file. How can I stop it?

  Hi SteveGHowe,
   
  -Remember to make changes to your computer after that this problem started to happen?
   
  Try to disable and re-enable the Media Center service and check:
   
  a. Click Start. Click run.
  b. type: services.msc and press ENTER.
  c. find Service Media Center Receiver.
  d. right-click on the service and click on stop.
  e. restart the computer and follow the same steps of 'a' by 'c '.
  f. now right-click on the service and click Start.
   
  Also, try the steps listed in the following link:
   
  Troubleshooting steps I use for Media Center component registration failure error

• BTStackServer.exe - Application error, the instruction at 0x0054eb27 referenced memory at 0x000001ef. The memory could not be read

  Sometimes my computer will display a "BTStackServer.exe - Application error' window that reads:"the instruction at 0x0054eb27 referenced memory at 0x000001ef. The memory could not be read. When this error POPs, within seconds the computer just turned off completely and I have to turn it back on. As a first step, it rarely happened, but now it will be pop up and stop a little less than 5 minutes to restart the computer. I have a Lenovo x 201 running Windows 7 PRO, and two sticks of 4 G of ram. I tried reversing the two RAM sticks from one location to the other, but that has no effect. Would it still a problem with the RAM sticks? I have the latest version of Norton Security and it shows no virus. If anyone has any ideas, what could be the cause of this it would be appreciated.

  Hello Kevin,

  Thanks for the reply.

  I'm sorry for the late reply.

  I appreciate your time.

  Before reinstalling Windows, I suggest you run the system file checker (SFC) and see if it helps.
  Reference:
  Use the System File Checker tool to repair missing or corrupted system files
  https://support.Microsoft.com/en-us/KB/929833

  System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files.

  Please keep us updated.

  Thank you

• RecoveryMgr.exe, the memory could not be read.

  RecoveryMgr.exe - 'the instruction at 0x8000d030 referenced memory at 0x0012ac60. The memory could not be read.

  Hello world!

  I was trying to reinstall Windows 7 Edition home premium on my HP Pavilion dv7-2280eo, when I was prompted with this message.

  I had previously deleted my entire hard drive by mistake, trying to Chrome OS and Windows 7 dualboot.

  So, naturally, I tried to run the BIOS recovery, but nothing helps.

  I then remove Chrome OS by formatting the hard disk (quick format) a Fedora live USB, I had laying around.

  So now I'm trying to reinstall Windows 7 through my HP recovery disks, but this error message does not seem to let me pass. Is there something I can do?

  I fixed it!

  Alright. I thought I might as well make a step to step guide for people who in the future may face the same problem I had.

  1. download MiniTool Partition Wizard Bootable. ISO file. (Download herepage, choose the one at the bottom of the page.) (Bravo @ CherylG for the download link.)

  2 create a bootable CD with the. ISO file using any CD/DVD burning software you have. (Or if you have not, you can download imgburn for free here ) (Once again, Bravo @ CherylG for the download link.)

  3. make sure that your boot order is correct.
    Even if it should automatically start, seeing that you currently do not have any BIOS operating system start to, as in my case, you might have to move your CD/DVD drive to the top of your boot priority in the BIOS.
  

   

  4. make sure you have a wired ethernet (CAT5) cable. For some reason any MiniTool Partition Wizard does not start without a wired internet connection.

  5 start the MiniTool Partition Wizard.
  In my case, I deleted all the partitions on the left, while I knew that I wasn't wasting any space to keep all the files in my failed experiment of chrome. Essentially, you want to have a completely unallocated * HARD drive, if it wasn't what you started with. Now create a FAT32 partition *, covering the entire HARD drive, so that you just now had a large FAT32 partition. Now, go ahead and format this partition, again, using parameters of FAT32. Now go to general > output

  * Unallocated space appears as gray in the MiniTool Partition Wizard
  * Apparently NTFS does not work with the recovery discs. It must be FAT32.

  6. now when you start your PC using your HP (Disc 1) recovery disks and click on recover to factory settings windows and accept the agreements and the following warnings.

  7 feed on your computer, your HP recovery discs until he did install.

  8. enjoy your freshly recovered computer.

  
  I hope this helps someone in the future! And if you really wiped out your entire hard drive accidentally drive, (like me ~ ~)
  Don't forget, the failure is the first step to success!
  

  -AkTheTimelord

• When I try to print from photoshop cc I get the message "the instruction at 0xb660643f referenced memory at 0 x 00000006. the memory could not be read. I'm running on Windows using Intel (R) Graphics 4600 8.1

  When I try to print from photoshop cc I get the message "the instruction at 0xb660643f referenced memory at 0 x 00000006. the memory could not be read. I run on Windows using Intel (R) Graphics 4600 8.1. Can someone help me with this?

  Hi Tanuj,

  Thanks for your reply. The problem seems to be a damaged printer driver. I tried to print from my laptop computer rather than my PC and that worked OK. I downloaded the latest driver for the Epson 3880 but then find that the print spooler has become invalid. When I restarted the print spooler, everything worked again and I'm able to print as usual.

  Concerning

  Gordon

  Gordon Gentles

  [email protected]

• Get a pop-up 'the instruction at 0x4000ed70 referenced memory at 0 x 00000018. The memory could not be read. »

  Apologies if this is the wrong place to put this.

  Earlier I turned on my computer. A pop-up appeared and said "the instruction at 0x4000ed70 referenced memory at 0 x 00000018. The memory could not be read. »

  Since there was only one option, click on OK to terminate the program, I did. Nothing seems to be different; computer does not restart, seems to work very well and everything. But I'm just curious, what on earth does that mean?

  I don't know if I need to further details, but my computer is running Windows 7 Home Premium.

  Probably just a glych with an auto from problem and you only have to investigate if the problem persists, if so http://support.microsoft.com/kb/929135

• Can not start my computer hp envy and notification, I get the instruction at 0x6dcf61a0 referenced memory at 0xe19fa418. The memory could not be read

  Original title: the pc startup problem

  I can't start my computer hp envy and the notification I receive

  Theinstruction at 0x6dcf61a0 referenced memory at 0xe19fa418. The memory could not be read

  After I ok this threat my laptop screen will begin to Flash and no action more than I can do except power off.

  Hello

  Thanks for all, but am confused after a lot of links sent u and also the main problem is that I can't connect to my laptop that I told u im unable to take any action.

  The first thing that I advised you to do did not connect.

  I suggest you read the advice of HP

  Run HP diagnostics:

  http://WWW8.HP.com/us/en/campaigns/hpsupportassistant/PC-DIAGS.html?JumpID=va_r602_us/en/any/PPS/pl_ot_ob_ds_pd/HP_PC_Hardware_Diagnostics_cc/DT

• Error - the instruction at "0x7c923845" referenced memory at "0x00000000". the memory could not be "read". Computer Windows XP freezes when online.

  Original title: svchost.exe - Application error.

  When I'm online I get the error message appear as follows:

  Svchost.exe - Application error

  The instruction at "0x7c923845" referenced memory at "0x00000000". the memory could not be "read".

  Then my computer freezes

  Don't know what triggered it on my machine, I do not use 'messenger' , but I discovered that it was something to do with Windows. I have a Toshiba laptop, I finally ran the process of "adding value to products" using their 'product recovery disk '.  It took hours to reload everything and download the updates after the hard drive has been re-configured, but it seems to have solved the problems that I had with.  Radical solution, I know, but I'm not a "geek" so was becoming more frustrated with the constant "freezes" and poor performance.  I can only assume that my Windows XP system had somehow been corrupted.  It's all working fine now, fingers crossed!

• Acrobat and Reader 8.  When you try to print, the memory could not be "read".

  A user (without local administrator rights) does a job batch of Microstation and exported all his drawings in pdf format.  They open correctly in Acrobat 8 and Reader 8.  When he clicks on the button print, it gets the error below.  When I login with local administrator rights, I can print these accurate pdfs very well.  Here is the event/error log entry.   Any help would be greatly appreciated.   It runs Windows XP SP3.

  Event type: Information

  Event source: Application Popup

  Event category: no

  Event ID: 26

  Date: 27/03/2012

  Time: 17:27:46

  User: n/a

  Computer:

  Description:

  Application popup: 2012-03-27 C6-01. PDF - Adobe Acrobat Professional: Acrobat.exe - Application error: the instruction at "0x0436959a" referenced memory at "0x00000d28". The memory could not be "read".

  Click OK to terminate the program

  Click on CANCEL to debug the program

  We tested with another nonadministrator account and Acrobat worked fine.  Therefore, the problem was in the user's profile.  We just its data saved, deleted the old profile and did reconnect.  This has created new profile.  Acrobat works beautifully.

• Svchost.exe Instruction at 0 x 0000000, memory could not be 'read '.

  Application error - svchost.exe Instruction at 0 x 0000000, memory could not be 'read '. My PC crasches is frozon

  You must identify which application was using svchost.exe when the error occurred?

  What you were using at the time? The error occurs on a regular basis? How long between errors?

  Take a look in the system and Application logs in the errors and warnings event viewer and post here the copies. Do not post on that more than 48 hours ago.

  You can access event viewer by selecting Start, Control Panel, administrative tools, and Event Viewer. When searching for the meaning of the error, information about the event ID, Source and Description are important.

  A tip for posting copies of error reports! Run Event Viewer and double-click the error you want to copy. You will see a button resembling two pages. Click on the button and close Event Viewer. This places a copy of the report to your Clipboard. Paste it into the body of your message. Make sure that it is the first dough right out of the event viewer.

  It is always sensitive in this situation to achieve a malware check.

  Download and install Malwarebytes (free version for individuals only), updated definitions and run in safe mode. Disable other security software while you do the analyses.

  http://www.Malwarebytes.org/

  Download and run SuperAntiSpyware (Free Edition)

  http://www.SUPERAntiSpyware.com/download.html

• The instruction at 0x73238e6f referenced memory at 0x00000000. The memory could not be read.

  "The instruction at 0x73238e6f referenced memory at 0x00000000. The memory could not be read. Click on OK to terminate the program. »
  Computer turns on but before he can get to the login screen I get this error. The screen remains black, with the exception of the error window.
  It had also decided to perform a disk check before it happened.

  Hello

  1 did you changes to the computer before the show?

  2. When you receive the error message?

  Try the steps below and check if the problem persists.

  Step 1:

  Safe mode

  Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.

  See the link below to start the computer in safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2:

  Clean boot

  I recommend you perform the clean boot.

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note:

  After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

   

• The instruction at 0x76a10cb3 referenced memory at 0x00000008. The memory could not be read. Help, please

  I get a meassage on my phone that says: the instruction at 0x76a10cb3 referenced memory at 0x00000008. The memory could not be read.

  He completely disable any use in my computer. I haven't added any new software, it is just appeared while I was with my computer. No one knows what may cause this problem.

  When you run an application that was built by using Microsoft .NET Framework 1.1 and the application is under a heavy load and uses a lot of memory, you may receive the following error message:

  The instruction at '79259769 'referenced memory at "0x00000008" x 0. The memory could not be "read".

  http://support.Microsoft.com/kb/830724/en-us

  Try to download the latest version and check

  http://www.Microsoft.com/en-in/Download/details.aspx?ID=17718

  Or

  http://www.Microsoft.com/en-in/Download/details.aspx?ID=40779

• The instruction at "0x7c9105f8" referenced memory at "0x08c60010". The memory could not be 'read'.___Click on OK to terminate the program.

  My problem is that whenever I try to open a game, I get the error message that

  "The instruction at"0x7c9105f8"referenced memory at"0x08c60010". The memory could not be "read".

  Click on OK to terminate the program. »

  and I have to close the program.

  Hi Dani,

  1. who is the edition of Windows that is installed on the computer?
  2. what game you try to play?

  Try these steps and check the result.
  Step 1: Run the memory diagnostic tool
  a. see diagnosis of problems of memory on your computer
  b. Once you correct the errors, check if the problem persists.

  Step 2: Check the game sellers website to see if there are updates or patches for the game and install it.

  Step 3: If the problem persists, uninstall and reinstall the game and then check the result.

  Visit our Microsoft answers feedback Forum and let us know what you think.