ACS 3.3 followed by an asynchronous connection attempt.

Similar Questions

• The connection attempt failed because the modem (or other connecting device) on the remote computer is out of use. Error 777

  I've always used my blackberry to tether my phone but I get the following error message and I can't solve this problem, any help would be appreciated, thanks!

  The connection attempt failed because the modem (or other connecting device) on the remote computer is out of use. Error 777

  Hello

  It seems that the blackberry is not more.

  Pass the installation attaches on the blackberry and make sure that it is configured properly and work.

• What is the deadline for no connection attempts?

  Original title: access attempts.

  What is the deadline for no connection attempts? If my system is configured to block after 3 attempts, how much time must elapse before the meter is "reset"? For example, I am trying to login with an incorrect password twice, but I don't want to lock the machine. How long should I wait to try again? It is a system that is part of a network (2012 server and active directory).

  Thank you!

  It is easy to determine.

  Open a command prompt window

  Start-> all programs-> Accessories-> command prompt

  Then, enter the following command:

  net accounts

  In the output that follows, the 'locking threshold' is the number of missed passwords allowed before the lockout and the ' locking ' is the number of minutes that you will be locked, and the "Lockout observation window" is the time window in which there is lack of passwords.

  HTH,

  JW

• Monitoring VPN connection attempts

  I would like to be able to use the syslog messages that are detached from the ASA to monitor VPN connection attempts (successful or not). Looking at the posts system there are several codes that relate to this.

  I wonder if anyone has a good way to use syslog to do this? There are some codes that can be used for this information?

  Thank you.

  You can set the ASA to send syslog messages when the user connects and disconnects. There are a few types of 'remote access' as IPsec VPN, webvpn / without client anyconnect/ssl vpn client that you can follow.

  If you are using Clientless SSL VPN syslogs usually begin with 716xxx.  For example the syslog for connect is 716001 and disconnect is 716002.  There is a list of other Clientless VPN SSL related messages here. You can view the specific contents of each journal here:

  http://www.Cisco.com/en/us/docs/security/ASA/asa80/system/message/logmsg

  http://www.Cisco.com/en/us/docs/security/ASA/asa80/system/message/logmsgs.html#wp4776913

  If you use SSL VPN Client (SVC1.x, AnyConnect 2.x) syslogs usually begin with 722xxx. For example, the syslog for connect is 722022 and disconnect is 722023. There is a list of other customer VPN SSL related posts here

  http://www.Cisco.com/en/us/docs/security/ASA/asa80/system/message/logmsg

  http://www.Cisco.com/en/us/docs/security/ASA/asa80/system/message/logmsgs.html#wp4778697

  If you use the IPSec VPN client, you can follow a success to connect with 713119 (indicates the phase 1 completed), 713049 (indicates the complete Phase2) and disconnect with 113019. There is a syslog ipsec additional 713049 that you can follow for ipsec.

  http://www.Cisco.com/en/us/docs/security/ASA/asa80/system/message/logmsgs.html#wp4775678

  http://www.Cisco.com/en/us/docs/security/ASA/asa80/system/message/logmsgs.html#wp4775412 http://www.Cisco.com/en/US/docs/Security/ASA/asa80/System/message/logmsg

  http://www.Cisco.com/en/us/docs/security/ASA/asa80/system/message/logmsgs.html#wp4769539

  Here are some other notes to keep in mind:

  -You can tell that the logging levels you currently have on the command line ASA with 'show log '.

  -Newspapers that you send to a syslog server are controlled with the commands "Logging Trap". For example 'logging trap information' (level 6) or "trap alerts logging" (level 1)

  -You can tell what level of severity (i.e., alerts, critical, errors, warnings, notifications, informational, debug) each one connects through this link. As you can see by checking the link, those follow-up sign in or out as I've mentioned above are usually information (sev 6)):

  http://www.Cisco.com/en/us/docs/security/ASA/asa80/system/message/logsev

  http://www.Cisco.com/en/us/docs/security/ASA/asa80/system/message/logsevp.html

  -If you want to create a specific subset of the syslogs to send to a specific device, you can do it with a class or a list of logging:

  http://www.Cisco.com/en/us/docs/security/ASA/asa80/configuration/guide/m

  For example (class log):

  http://www.Cisco.com/en/us/docs/security/ASA/asa80/configuration/guide/m

  http://www.Cisco.com/en/us/docs/security/ASA/asa80/configuration/guide/monitor.html#wp1065253

  class check vpnc informational FRT

  For example (list of logging):

  http://www.Cisco.com/en/us/docs/security/ASA/asa80/configuration/guide/monitor.html#wp1065512

  log list mylist message 722022

  log list mylist message 722023

  logging trap mylist

  Don't forget to evaluate the positions that helped you and to mark it as resolved if you question has been answered.

  -heather

• Malware when oracle connection attempt

  I tried to act as a malicious user on my own database on my PC just for the sake of experiment.  I tried the following steps:
  I am connected to the database with the help of scott as sysdba user.  Then I gave the default password of the user scott, whose "Tiger."  Then
  surprisingly, I was able to connect as user SYS.  I'm now having the user SYS privileges.  I can be destroyed the entire base.

  The question is why I was able to connect as user SYS by using the username 'scott as sysdba' with scott password 'tiger '?   How
  to prevent such a thing for safety?

  Thank you in advance!

  Respect,
  Mussa.

  Mussa wrote:

  I tried to act as a malicious user on my own database on my PC just for the sake of experiment.  I tried the following steps:
  I am connected to the database with the help of scott as sysdba user.  Then I gave the default password of the user scott, whose "Tiger."  Then
  surprisingly, I was able to connect as user SYS.  I'm now having the user SYS privileges.  I can be destroyed the entire base.

  The question is why I was able to connect as user SYS by using the username 'scott as sysdba' with scott password 'tiger '?   How
  to prevent such a thing for safety?

  Thank you in advance!

  Respect,
  Mussa.

  Authentication of the OS allowed you to log

  you might have used any string as name user and/or any string as the password

  > How to prevent such a thing for safety?

  do NOT allow people to connect to the DB server itself

• Error: "connection attempt timed out, please check the connectivity of the internet" when trying to connect to Cisco AnyConnect 2.5 on Windows 7 x 64 computer with modem usb wireless HSIA.

  Original title: issue with Cisco AnyConnect 2.5 on win 7 x 64 when connecting to the internet using wireless HSIA usb modem.

  I have win 7 x 64 enterprize edition on my laptop.

  I have problems with Cisco anyconnect VPN client. When I'm on my corporate network it works fine.

  But when I connect to internet using HSIA modem usb wireless home form, client AnyConnect VPN will not connect. The error I get is "connection attempt has expired, please check internet connectivity.

  Please help me to solve this problem as soon as possible.

  Hi Manish,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet forums for assistance.

  I also recommend that you contact the VPN support to help:

  https://supportforums.Cisco.com/community/NetPro/security/VPN

• Cisco AnyConnect VPN Client (connection attempt failed because the network or pc problem cisco)

  Hi all

  I am trying to connect to my Cisco AnyConnect VPN Client but everytime I try, I get an error (connection attempt failed because the network or pc problem cisco)

  Can anyone help me please with this.

  Thank you

  Zia

  What is the local firewall on your computer?

• Connection attempts that have failed maximum AnyConnect on the LDAP Windows database

  Hello

  I can't seem to find the setting for the Web and client Anyconnect set connection attempts that have failed maximum when on the LDAP in Windows database.

  I would say that after that maximum 3 attempts to connect the possebility to connect again times out for 10 minutes.

  Now it is possible to log in as often as you want, which is a big security problem.

  Please, I can use some help to achieve this, thanks in advance.

  Best,

  Orson

  I don't think that this can be configured in AnyConnect or on the ASA. They both rely on the settings on the Windows Server. We can fix this. (reference)

• How to find the failed connection attempts at 'check' session is enabled

  How to find the unsuccessful connection attempt to dba_audit_trail when the "audit logon" is enabled.

  Filter your query against dba_audit_trail action_name = 'CONNECTION' with returncode! = 0 (returncode = 0 means that there are no errors - successful connection attempts)

• RTMPS connection delayed due to the direct connection attempt

  Hello world

  I have a big problem with the way the RTMPS connections are initiated in flash player.

  One of my customer network infrastructure does not allow direct connections to my server via port 443, but allows connections proxified (using the CONNECT method).

  The problem is that flash player expects the direct connection attempt to fail before trying the proxified... connection and on this direct infrastructure network connection timeout is 20 s (I can't change that).

  Users must wait for this time to connect to the server...

  Is there a way to tell the flash player do not attempt direct connection, or do not wait for this connection Timeout?

  Perhaps a directive in the automatic proxy configuration (.pac) file?

  I already tried every NetConnection proxyType values of parameter without success.

  Any help would be appreciated!

  You mentioned the 'CONNECT' method Have you tried "CONNECTOnly" that requires to initially use the default CONNECTION method and it is not always obey?

  Documentation on NetConnection.proxyType:

  Set the proxyType property before calling the NetConnection.connect() method.

  ...

  If the property is set to "CONNECTOnly", the player first attempts to use the CONNECT method. If this fails, there is no relief.

• Unable to connect to the host server: a connection attempt failed because

  Hi all

  I install my host ESX server in vmware workstation.  It works fine except when I am creating virtual machines.

  I'm not able to install the operating system on the virtual machine and I get this error that appears inside the virtual machine.

  Unable to connect to the host server: a connection attempt failed because the connected party did not respond after a certain time, or established connection failed because connected host has no

  to answer.  Do you want to retry?

  My ESX server hosts have static IP addresses.

  I've seen a few similar posts on this issue, but their solutions have not worked for me.

  Best regards

  Nathan

  I think we confuse you.  ESX server is running like a machine virtual within the workstation, correct?  If Yes, then you must edit the vmx esx server with these entries monitor configuration file *.  They can go anywhere in the file.  Once those have been added, you should be able to run 32-bit virtual machines within the esx server.

  -KjB

  VMware vExpert

• Detect direct P2P connection attempts

  Hello

  I wonder if it comes out a way to detect P2P connection attempts in a DIRECT_CONNECTIONS scenario. NetStream::onPeerConnect allows to accept (or reject) P2P direct connection, but it is triggered on successful login. But there is nothing to detect the beginning of attempts.

  I guess that the service make you send initiator information peer exchange for destinator, to reach the UDP process punching hole. She that we could detect homologous initiator id that is trying to connect (the side target peer), we could go back to server more easily!

  You confirm that it is not available, no event does allow it?

  Best regards

  Mathieu

  lol the appointment service does not send the ID of the peer of the initiator to the target.

  your application logic can inform the target connection is inbound via a communication channel out-of-band if write you it like this. for example, the "VideoPhoneLabs" example on the web page of Cirrus Labs uses 'Short message relay service' Cirrus to send a notice of appeal to the target.

  József, to another thread in this forum, has recently published a short code snippet that can be used with FMS to reproduce this function of relay.

• Dynamic JDBC: account blocked after the single connection attempt

  Our database is set up so that user accounts are locked after 3 bad connection attempts, but they're getting locked after only 1 attempt. I would like that it so that any attempt to connect ADF would be only created an Oracle connection attempt.
  I use JDeveloper 10.1.3.4.0 and by default, right click and then run.
  
  Code of the not yet documented Steve Muench ADF application examples at http://blogs.oracle.com/smuenchadf/examples/#14
  which is also described in http://www.oracle.com/technology/products/jdev/howtos/10g/dynamicjdbchowto.html
  
  Looking at the audit trail, I see the database tries to connect 5 times than the user.
  Trying to debug, I see that the doFilter in ADFBindingFilter is also called 5 times.
  
  In my research, I read the proposals that it might be the framework that tries to connect several times. It depends on the connection pooling and application module pooling settings you have.
  But I tried searchign in JDeveloper and don't see not where I set or change anything on reunification.
  
  Thank you
  
  Jeff

  Oracle has finally acknowledged it is a defect of jdeveloper and entered
  Bug 9153659: JDBC DYNAMICS IDENTIFICATION ACCOUNT LOCKS AFTER 1 FAILED CONNECTION information
  And I have no idea how oracle reactive is subject of fixed bugs, but since the last version of jdeveloper 10 numbered fixed iin bugs 5 millions, I guess that this will never be corrected.

• How to plan the failover for the following scenarios in Flex-connect mode.

  The following queries are against the AP high availability (no SSO failover or controller HA), which means that if a controller fails, the AP will be failover to the secondary controller that is in a different location than Geo. the AP will be to connect Flex with local switching and local authorization mode: in this scenario, here are my questions

  1: if I have a SSID that has a set of interfaces that are connected to him, can I switch it on the other controller where there may be a single WLAN connected. ?

  2:do, we need to subnet masks to match both ends?

  3: if I have a SSID with open authentication, can I configure the SSID of the remote network without authentication?

  4: can someone link me to the top with a document that explains the configuration of the case study of the flex-connect mode fail on scenarios.

  Any help given would be really appreciated.

  Thank you.

  1: if I have a SSID that has a set of interfaces that are connected to him, can I switch it on the other controller where there may be a single WLAN connected. ?

  The groups interface works only for centrally switch not locally

  2:do, we need to subnet masks to match both ends?

  See #1

  3: if I have a SSID with open authentication, can I configure the SSID of the remote network without authentication?

  If you configure an SSID with open authentication, then the all having APs SSID assigned to it will use.  Open authentication is identical to no authentication.

  4: can someone link me to the top with a document that explains the configuration of the case study of the flex-connect mode fail on scenarios.

  Do a search on Google for 'FlexConnect deployment guide It will have links to failover.

  -Scott

• Connection attempts to ACS appliance - where to find?

  Our security team has detected the failure of authentication for multiple users on our unit of ACS. Usually, I try to failed attempts handled by the AEC for other systems that use for authentication RADIUS or GANYMEDE. Where GBA 5.4 find logs for users trying to actually connect to the device?

  TIA,

  Lee

  Date of arrival:

  Monitoring and reports

  > Reports

  > Catalog

  > Body of CSA

  > ACS administrator connections