Monitoring VPN connection attempts
I would like to be able to use the syslog messages that are detached from the ASA to monitor VPN connection attempts (successful or not). Looking at the posts system there are several codes that relate to this.
I wonder if anyone has a good way to use syslog to do this? There are some codes that can be used for this information?
Thank you.
You can set the ASA to send syslog messages when the user connects and disconnects. There are a few types of 'remote access' as IPsec VPN, webvpn / without client anyconnect/ssl vpn client that you can follow.
If you are using Clientless SSL VPN syslogs usually begin with 716xxx. For example the syslog for connect is 716001 and disconnect is 716002. There is a list of other Clientless VPN SSL related messages here. You can view the specific contents of each journal here:
http://www.Cisco.com/en/us/docs/security/ASA/asa80/system/message/logmsg
http://www.Cisco.com/en/us/docs/security/ASA/asa80/system/message/logmsgs.html#wp4776913
If you use SSL VPN Client (SVC1.x, AnyConnect 2.x) syslogs usually begin with 722xxx. For example, the syslog for connect is 722022 and disconnect is 722023. There is a list of other customer VPN SSL related posts here
http://www.Cisco.com/en/us/docs/security/ASA/asa80/system/message/logmsg
http://www.Cisco.com/en/us/docs/security/ASA/asa80/system/message/logmsgs.html#wp4778697
If you use the IPSec VPN client, you can follow a success to connect with 713119 (indicates the phase 1 completed), 713049 (indicates the complete Phase2) and disconnect with 113019. There is a syslog ipsec additional 713049 that you can follow for ipsec.
http://www.Cisco.com/en/us/docs/security/ASA/asa80/system/message/logmsgs.html#wp4775678
http://www.Cisco.com/en/us/docs/security/ASA/asa80/system/message/logmsgs.html#wp4775412 http://www.Cisco.com/en/US/docs/Security/ASA/asa80/System/message/logmsg
http://www.Cisco.com/en/us/docs/security/ASA/asa80/system/message/logmsgs.html#wp4769539
Here are some other notes to keep in mind:
-You can tell that the logging levels you currently have on the command line ASA with 'show log '.
-Newspapers that you send to a syslog server are controlled with the commands "Logging Trap". For example 'logging trap information' (level 6) or "trap alerts logging" (level 1)
-You can tell what level of severity (i.e., alerts, critical, errors, warnings, notifications, informational, debug) each one connects through this link. As you can see by checking the link, those follow-up sign in or out as I've mentioned above are usually information (sev 6)):
http://www.Cisco.com/en/us/docs/security/ASA/asa80/system/message/logsev
http://www.Cisco.com/en/us/docs/security/ASA/asa80/system/message/logsevp.html
-If you want to create a specific subset of the syslogs to send to a specific device, you can do it with a class or a list of logging:
http://www.Cisco.com/en/us/docs/security/ASA/asa80/configuration/guide/m
For example (class log):
http://www.Cisco.com/en/us/docs/security/ASA/asa80/configuration/guide/m
http://www.Cisco.com/en/us/docs/security/ASA/asa80/configuration/guide/monitor.html#wp1065253
class check vpnc informational FRT
For example (list of logging):
http://www.Cisco.com/en/us/docs/security/ASA/asa80/configuration/guide/monitor.html#wp1065512
log list mylist message 722022
log list mylist message 722023
logging trap mylist
Don't forget to evaluate the positions that helped you and to mark it as resolved if you question has been answered.
-heather
Tags: Cisco Security
Similar Questions
-
Cisco AnyConnect VPN Client (connection attempt failed because the network or pc problem cisco)
Hi all
I am trying to connect to my Cisco AnyConnect VPN Client but everytime I try, I get an error (connection attempt failed because the network or pc problem cisco)
Can anyone help me please with this.
Thank you
Zia
What is the local firewall on your computer?
-
active monitoring of remote access vpn connections
Hi all
I use asa 5520, and asa 5540 for remote access vpn connections. Is it possible to active my vpn connections monitoring so that there would be alerts for vpn tunnels which fail to implement for other reasons other than the authentication of users? Pls advise. Thks in advance.
Kiwi Syslog will work fine - as long as you have a licensed version, a 'free' version does not support e-mail extras.
See the url below and search for "VPN", you will see what VPN syslog codes you can choose from.
http://www.Cisco.com/en/us/docs/security/ASA/asa83/system/message/logmsgs.html
HTH >
-
VPN connection: An unexpected error has occurred.
I am suddenly unable to get my built-in VPN connection works on my iMac with OS X 10.11.5. I get the VPN connection message: an unexpected error has occurred. I have been using this VPN configuration to connect to work for several months with success.
But last week (and I do not know if it had nothing to do with it), I went on vacation and used a free wi - fi setup of Tim Hortons. I had a LOT of trouble getting the next login page, and I checked all playing with different settings of network without success. When a change did not work, I put it to its original setting. Finally, I learned to use Safari to access the free WiFi connection page of Tim. Then once connected, everything was OK.
But when I returned a week later and if necessary, to start my VPN connection to access the work, it wouldn't start. I checked and recheck all my settings preferably of different network, but did not find those who were wrong. I even deleted and re-entered my VPN service definition without solving the problem.
Thinking that the problem could be the newly installed ISP of Bell equipment (we went from Rogers while I was away), I used my BlackBerry smartphone (issued by my employer) to create a wi - fi hotspot and accessed to the internet using this connection which completely ignored my home ISP equipment. But still, I was unable to establish a VPN connection.
I then tried my iPad VPN connection, and it worked! Then, I defined a VPN service on the iMac to my wife and the iMac to my daughter and was able to successfully establish a VPN connection to my work very well, using exactly the same VPN configuration. This led me to the conclusion, it was a problem on my iMac (and not with my new ISP or VPN system of my work that had none of the changes you made), but I still can't find what is "broken". I run Onyx for my iMac OS X 10.11.5 and repaired permissions and clean the cache and all the rest she is doing to "solve" problems. But the problem persisted.
Is there a preference file corrupted somewhere (scan option is no longer on the current version of the Onyx for a reason any)?
I still have a network setting wrong somewhere I need to go back to the system is correct value?
Here is the attempt to VPN from the file system.log (with some hidden values in the case where they display my work VPN access):
26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: NESMLegacySession [VPN works: 295091E5-xxxx-4B6A-xxxx-F7A7xxxxxxAA]: received an order to start SystemUIServer [257]
26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: NESMLegacySession [VPN works: 295091E5-xxxx-4B6A-xxxx-F7A7xxxxxxAA]: changed to connecting status
26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: IPSec connection to server nnn.nnn.n.n
26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: phase 1 of the IPSec from.
26 June at 16:13:48 Myrons-iMac raccoon [520]: agreed to the takeover of vpn connection.
26 June at 16:13:48 - last message repeated 1 time-
26 June at 16:13:48 Myrons-iMac raccoon [520]: IPSec connection to server nnn.nnn.n.n
26 June at 16:13:48 - last message repeated 1 time-
26 June at 16:13:48 Myrons-iMac raccoon [520]: connection.
26 June at 16:13:48 Myrons-iMac raccoon [520]: IPSec Phase 1 started (initiated by me).
26 June at 16:13:48 - last message repeated 1 time-
26 June at 16:13:48 Myrons-iMac raccoon [520]: bind 1 (cannot assign requested address)
26 June at 16:13:48 - last message repeated 1 time-
26 June at 16:13:48 Myrons-iMac raccoon [520]: sendfromto failed
26 June at 16:13:48 - last message repeated 1 time-
26 June at 16:13:48 Myrons-iMac raccoon [520]: Phase 1 negotiation failed due to the error of sending. 94437eb7d5b1b6e8:0000000000000000
26 June at 16:13:48 - last message repeated 1 time-
26 June at 16:13:48 Myrons-iMac raccoon [520]: can not send packets
26 June at 16:13:48 - last message repeated 1 time-
26 June at 16:13:48 Myrons-iMac raccoon [520]: IKE Packet: send failed. (Initiator, aggressive Mode 1 Message).
26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: Controller IPSec: IKE FAILED. Phase 1, assert 0
26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: NESMLegacySession [VPN works: 295091E5-xxxx-4B6A-xxxx-F7A7xxxxxxAA]: status changed by disconnecting
26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: IPSec disconnection from the server 142.201.5.6
26 June at 16:13:48 Myrons-iMac raccoon [520]: IPSec disconnection from the server nnn.nnn.n.n
26 June at 16:13:48 - last message repeated 3 times-
26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: NESMLegacySession [VPN works: 295091E5-xxxx-4B6A-xxxx-F7A7xxxxxxAA]: status changed to offline, terminus right no
Any help or insight would be more useful and appreciated... so that I can work from home again.
Thank you
Myron VanderLaan
I finally found my VPN problem.
There is a 'racoon' file that is generated when I connect to the VPN to my work site.
I have created a modified version of this file so that my connection does not expire in 3600 seconds (changed in 24 hours).
Apparently, there are some slightly different settings (such as certain IP addresses other than VPN IP of my work) in this file under our new ISP Bell from the former FAI Rogers.
And if I connect to the WiFi Hotspot from my BlackBerry, it does not once again because these settings in the file are different again. I must return the file generated instead of my modified file.
Bad luck!
-
I am trying to create a VPN connection, but when I get to the step that allows me to create the VPN, the radial buttons are grayed out, it is a Windows component is missing and does not allow me to create VPN. I am running Windows XP Home addition. I recently got a Malware attack and had the quarantine and fix trojen attempts. After the restoration, I found that my previous VPN connection was broken. When I tried to add a new connection, I'm stuck on the screen connection virtual network in the the radial button private network connection wizard is grayed out, he could not check.
Hello
Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Windows XP TechNet forum. You can follow the link to your question:
http://social.technet.Microsoft.com/forums/en/itproxpsp/threads
-
Original title: issue with Cisco AnyConnect 2.5 on win 7 x 64 when connecting to the internet using wireless HSIA usb modem.
I have win 7 x 64 enterprize edition on my laptop.
I have problems with Cisco anyconnect VPN client. When I'm on my corporate network it works fine.
But when I connect to internet using HSIA modem usb wireless home form, client AnyConnect VPN will not connect. The error I get is "connection attempt has expired, please check internet connectivity.
Please help me to solve this problem as soon as possible.
Hi Manish,
The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet forums for assistance.
I also recommend that you contact the VPN support to help:
https://supportforums.Cisco.com/community/NetPro/security/VPN
-
Hello
I have pix 515E and I configured a VPN on it. My users connect to my network from the internet via the Cisco VPN client.
I have problem, only their LAN machine can do VPN from Cisco VPN client to my network at once.
Users are connected to the internet via an ADSL router and the LAN switch.
--------------------------------------------------
PIX Config:
6.3 (4) version PIX
interface ethernet0 car
Auto interface ethernet1
ethernet0 nameif outside security0
nameif ethernet1 inside the security100
enable encrypted password xxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxx encrypted passwd
hostname ABCDEFGH
ABCD.com domain name
clock timezone IS - 5
clock to summer time EDT recurring
fixup protocol dns-length maximum 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol 2000 skinny
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
inside_out to the list of allowed access nat0_acl ip 192.168.1.0 255.255.255.0 192.168.2.0 255.255.255.0
list of allowed shared access ip 192.168.1.0 255.255.255.0 192.168.1.0 255.255.255.0
pager lines 24
Outside 1500 MTU
Within 1500 MTU
IP address outside xxx.xxx.xxx.xxx 255.255.255.0
IP address inside 192.168.1.1 255.255.255.0
alarm action IP verification of information
alarm action attack IP audit
IP local pool vpnpool 192.168.2.1 - 192.168.2.254
PDM logging 100 information
history of PDM activate
ARP timeout 14400
Global interface 10 (external)
NAT (inside) 0-list of access inside_out-nat0_acl
NAT (inside) 10 0.0.0.0 0.0.0.0 0 0
Route outside 0.0.0.0 0.0.0.0 xxx.xxx.xxx.xxx 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225
H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00
Timeout, uauth 0:05:00 absolute
GANYMEDE + Protocol Ganymede + AAA-server
AAA-server GANYMEDE + 3 max-failed-attempts
AAA-server GANYMEDE + deadtime 10
RADIUS Protocol RADIUS AAA server
AAA-server RADIUS 3 max-failed-attempts
AAA-RADIUS deadtime 10 Server
AAA-server RADIUS (inside) host ABCDE timeout 10
AAA-server local LOCAL Protocol
RADIUS protocol radius AAA-server
Radius max-failed-attempts 3 AAA-server
AAA-radius deadtime 10 Server
RADIUS protocol AAA-server partnerauth
AAA-server partnerauth max-failed-attempts 3
AAA-server deadtime 10 partnerauth
partnerauth AAA-server (host ABCDEFG myvpn1 timeout 10 Interior)
Enable http server
http 192.168.1.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
SNMP-Server Community public
No trap to activate snmp Server
enable floodguard
Permitted connection ipsec sysopt
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto-map dynamic outside_dyn_map 20 the transform-set ESP-3DES-MD5 value
map outside_map 65535-isakmp ipsec crypto dynamic outside_dyn_map
card crypto client outside_map of authentication partnerauth
outside_map interface card crypto outside
ISAKMP allows outside
ISAKMP key * address 0.0.0.0 netmask 0.0.0.0
ISAKMP identity address
part of pre authentication ISAKMP policy 8
ISAKMP strategy 8 3des encryption
ISAKMP strategy 8 md5 hash
8 2 ISAKMP policy group
ISAKMP life duration strategy 8 the 86400
part of pre authentication ISAKMP policy 10
ISAKMP policy 10 3des encryption
ISAKMP policy 10 sha hash
10 2 ISAKMP policy group
ISAKMP life duration strategy 10 86400
vpngroup myvpn address vpnpool pool
vpngroup myvpn ABCDE dns server
vpngroup myvpn by default-field ABCD.com
splitting myvpn vpngroup split tunnel
vpngroup idle 1800 myvpn-time
vpngroup myvpn password *.
Telnet 192.168.1.0 255.255.255.0 inside
Telnet timeout 5
SSH timeout 5
Console timeout 0
dhcpd address 192.168.1.200 - 192.168.1.254 inside
dhcpd dns ABCDE
dhcpd lease 3600
dhcpd ping_timeout 750
field of dhcpd ABCD.com
dhcpd outside auto_config
dhcpd allow inside
Terminal width 80
--------------------------------------------------
Thanks in advance.
-Amit
Try to add the "isakmp nat-traversal" command to your PIX. I suspect what happens is that Remote LAN users is translated to a single IP address as they pass through the DSL connection. I also assume that the machine doing the translation has a capacity of IPSec passthrough. Linksys routers would be a good example of this type of NAT device that allows IPSec pull-out.
If that's the case, that a single VPN connection will be able to operate both. The above command will turn PIX detect clients that are located behind a NAT device, and then try to configure the VPN sessions in UDP packets and so to work around the limitation of NAT and IPSec passthrough device.
-
Hi all
I have two or three IKE/IPSEC VPN enabled over a 5515 ASA client connections and I would record the VPN activity (login user name, connection time and the duration...) as information I see go to "monitoring > VPN > VPN statistics > Sessions.»
Thanks for your help
Kind regards
You need a reporting process for thie syslog data entry. Personally, I use SPLUNK, but everything you have, you will need to get syslog messages with
"ASA-4-722051%" OR "% ASA-4-113019".
(I use ASA 8.4.7). Messages with these identifiers indicate a connection/disconnection.
-
IPSec VPN: connected to the VPN but cannot access resources
Hello
I configured a VPN IPSec on two ISP with IP SLA configured, there is a redundancy on the VPN so that if address main is it connect to the VPN backup.
QUESTIONS
-Connect to the primary address and I can access resources
-backup address to connect but can not access resources for example servers
I want a way to connect to backup and access on my servers resources. Please help look in the config below
configuration below:
interface GigabitEthernet0/0
LAN description
nameif inside
security-level 100
IP 192.168.202.100 255.255.255.0
!
interface GigabitEthernet0/1
Description CONNECTION_TO_DOPC
nameif outside
security-level 0
IP address 2.2.2.2 255.255.255.248
!
interface GigabitEthernet0/2
Description CONNECTION_TO_COBRANET
nameif backup
security-level 0
IP 3.3.3.3 255.255.255.240
!
!
interface Management0/0
Shutdown
No nameif
no level of security
no ip address
management only
!
boot system Disk0: / asa831 - k8.bin
boot system Disk0: / asa707 - k8.bin
passive FTP mode
clock timezone WAT 1
DNS domain-lookup outside
DNS server-group DefaultDNS
Name-Server 4.2.2.2
permit same-security-traffic inter-interface
permit same-security-traffic intra-interface
network of object obj-200
192.168.200.0 subnet 255.255.255.0
Description LAN_200
network of object obj-202
192.168.202.0 subnet 255.255.255.0
Description LAN_202
network of the NETWORK_OBJ_192.168.30.0_25 object
subnet 192.168.30.0 255.255.255.128
network of the RDP_12 object
Home 192.168.202.12
Web server description
service object RDP
source eq 3389 destination eq 3389 tcp service
network obj012 object
Home 192.168.202.12
the Backup-PAT object network
192.168.202.0 subnet 255.255.255.0
NETWORK LAN UBA description
the DM_INLINE_NETWORK_1 object-group network
object-network 192.168.200.0 255.255.255.0
object-network 192.168.202.0 255.255.255.0
the DM_INLINE_NETWORK_2 object-group network
network-object object obj-200
network-object object obj-202
access-list extended INSIDE_OUT allow ip 192.168.200.0 255.255.255.0 any
access-list extended INSIDE_OUT allow ip 192.168.202.0 255.255.255.0 any
OUTSIDE_IN list extended access permit icmp any any idle state
OUTSIDE_IN list extended access permit tcp any object obj012 eq inactive 3389
gbnltunnel_splitTunnelAcl standard access list allow 192.168.200.0 255.255.255.0
standard access list gbnltunnel_splitTunnelAcl allow 192.168.202.0 255.255.255.0
BACKUP_IN list extended access permit icmp any any idle state
access extensive list ip 196.216.144.0 encrypt_acl allow 255.255.255.192 192.168.202.0 255.255.255.0
pager lines 24
Enable logging
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
backup of MTU 1500
Backup2 MTU 1500
local pool GBNLVPNPOOL 192.168.30.0 - 192.168.30.100 255.255.255.0 IP mask
no failover
ICMP unreachable rate-limit 1 burst-size 1
ICMP allow any backup
ASDM image disk0: / asdm-645 - 206.bin
don't allow no asdm history
ARP timeout 14400
NAT (inside, outside) static static source NETWORK_OBJ_192.168.30.0_25 destination DM_INLINE_NETWORK_1 DM_INLINE_NETWORK_1 NETWORK_OBJ_192.168.30.0_25
NAT (inside, outside) static source DM_INLINE_NETWORK_2 DM_INLINE_NETWORK_2 NETWORK_OBJ_192.168.30.0_25 NETWORK_OBJ_192.168.30.0_25 non-proxy-arp-search of route static destination
!
network of object obj-200
NAT dynamic interface (indoor, outdoor)
network of object obj-202
dynamic NAT (all, outside) interface
network obj012 object
NAT (inside, outside) interface static service tcp 3389 3389
the Backup-PAT object network
dynamic NAT interface (inside, backup)
!
NAT source auto after (indoor, outdoor) dynamic one interface
Access-group interface inside INSIDE_OUT
Access-group OUTSIDE_IN in interface outside
Access-group BACKUP_IN in the backup of the interface
Route outside 0.0.0.0 0.0.0.0 2.2.2.2 1 followed by 100
Backup route 0.0.0.0 0.0.0.0 3.3.3.3 254
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
WebVPN
value of the URL-list GBNL-SERVERS
identity of the user by default-domain LOCAL
the ssh LOCAL console AAA authentication
AAA authentication http LOCAL console
AAA authentication enable LOCAL console
http server enable 441
http 192.168.200.0 255.255.255.0 inside
http 192.168.202.0 255.255.255.0 inside
http 192.168.2.0 255.255.255.0 inside
http 192.168.30.0 255.255.255.0 inside
http 0.0.0.0 0.0.0.0 outdoors
http 0.0.0.0 0.0.0.0 backup
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start
ALS 10 monitor
type echo protocol ipIcmpEcho 31.13.72.1 interface outside
NUM-package of 5
Timeout 3000
frequency 5
Annex monitor SLA 10 life never start-time now
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
card crypto IPSec_map 10 corresponds to the address encrypt_acl
card crypto IPSec_map 10 set peer 196.216.144.1
card crypto IPSec_map 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
inside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
inside crypto map inside_map interface
ipsec_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
ipsec_map interface card crypto outside
gbnltunnel card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
backup of crypto gbnltunnel interface card
Crypto ca trustpoint ASDM_TrustPoint0
Terminal registration
name of the object CN = GBNLVPN.greatbrandsng.com, O = GBNL, C = ng
Configure CRL
Crypto ikev1 allow inside
Crypto ikev1 allow outside
Crypto ikev1 enable backup
IKEv1 crypto policy 10
authentication crack
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 20
authentication rsa - sig
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 30
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 40
authentication crack
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 50
authentication rsa - sig
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 60
preshared authentication
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 70
authentication crack
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 80
authentication rsa - sig
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 90
preshared authentication
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 100
authentication crack
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 110
authentication rsa - sig
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 120
preshared authentication
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 130
authentication crack
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 140
authentication rsa - sig
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 150
preshared authentication
the Encryption
sha hash
Group 2
life 86400
enable client-implementation to date
!
track 10 rtr 100 accessibility
!
Track 100 rtr 10 accessibility
Telnet 192.168.200.0 255.255.255.0 inside
Telnet 192.168.202.0 255.255.255.0 inside
Telnet timeout 5
SSH 192.168.202.0 255.255.255.0 inside
SSH 192.168.200.0 255.255.255.0 inside
SSH 0.0.0.0 0.0.0.0 inside
SSH 0.0.0.0 0.0.0.0 outdoors
SSH 0.0.0.0 0.0.0.0 backup
SSH timeout 30
SSH group dh-Group1-sha1 key exchange
Console timeout 0
management-access inside
a basic threat threat detection
threat detection statistics
a statistical threat detection tcp-interception rate-interval 30 burst-400-rate average rate 200
WebVPN
allow outside
enable backup
activate backup2
internal gbnltunnel group policy
attributes of the strategy of group gbnltunnel
Ikev1 VPN-tunnel-Protocol
Split-tunnel-policy tunnelspecified
greatbrandsng.com value by default-field
Group Policy 'Group 2' internal
type of remote access service
type tunnel-group gbnltunnel remote access
tunnel-group gbnltunnel General-attributes
address GBNLVPNPOOL pool
Group Policy - by default-gbnltunnel
gbnltunnel group of tunnel ipsec-attributes
IKEv1 pre-shared-key *.
type tunnel-group GBNLSSL remote access
type tunnel-group GBNL_WEBVPN remote access
attributes global-tunnel-group GBNL_WEBVPN
Group Policy - by default-gbnltunnel
tunnel-group 196.216.144.1 type ipsec-l2l
IPSec-attributes tunnel-group 196.216.144.1
IKEv1 pre-shared-key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
inspect the icmp
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
HPM topN enable
Cryptochecksum:6004bf457c9c0bc1babbdbf1cd8aeba5
: end
When you say that "the external interface is downwards using failover techniques" you mean this failover occurred because the ASA is no longer able to reach the 31.13.72.1? Not that the actual interface is broken?
If this is the case, then the NATing is your problem. Since you're using the same VPN pool for VPN connections the ASA cannot distinguish between the two streams of traffic if the external interface is still in place. The SLA tracking only removes a route in the routing table, but does not affect what happens in the NAT process.
try to change the NAT statement follows him and the test (don't forget to remove the other statements to exempt of NAT for this traffic during the test):
NAT (inside,any) static static source NETWORK_OBJ_192.168.30.0_25 destination DM_INLINE_NETWORK_1 DM_INLINE_NETWORK_1 NETWORK_OBJ_192.168.30.0_25
If this does not work, I would either turn off the external interface when a failover occurs, or create a second connection profile that contains a separate mass of IP for the VPN connection and ask users to connect using this profile when a failover takes place. Don't forget to create Nat exempt instructions for this traffic also.
--
Please note all useful posts
-
Error of customer Cisco VPN connection ASA 5505
I am unable to connect to the vpn I created on my ASA 5505 using the Cisco VPN Client on a Windows machine. The log of the vpn client and the config of the ASA 5505 is lower. Any help to solve this is appreciated.
CISCO VPN CLIENT LOG
Cisco Systems VPN Client Version 5.0.06.0160
Copyright (C) 1998-2009 Cisco Systems, Inc.. All rights reserved.
Customer type: Windows, Windows NT
Running: 6.1.7600
Config files directory: C:\Program Cisco Systems Client\
1 09:34:23.030 13/04/11 Sev = Info/4 CM / 0 x 63100002
Start the login process
2 09:34:23.061 13/04/11 Sev = Info/4 CM / 0 x 63100004
Establish a secure connection
3 09:34:23.061 13/04/11 Sev = Info/4 CM / 0 x 63100024
Attempt to connect with the server "71.xx.xx.253".
4 09:34:23.061 13/04/11 Sev = Info/6 IKE/0x6300003B
Attempts to establish a connection with 71.xx.xx.253.
5 09:34:23.061 13/04/11 Sev = Info/4 IKE / 0 x 63000001
From IKE Phase 1 negotiation
6 09:34:23.077 13/04/11 Sev = Info/4 IKE / 0 x 63000013
SEND to > ISAKMP OAK AG (SA, KE, NO, ID, VID (Xauth), VID (dpd), VID (Frag), VID(Nat-T), VID (Unity)) at 71.xx.xx.253
7 09:34:23.170 13/04/11 Sev = Info/5 IKE/0x6300002F
Received packet of ISAKMP: peer = 71.xx.xx.253
8 09:34:23.170 13/04/11 Sev = Info/4 IKE / 0 x 63000014
RECEIVING< isakmp="" oak="" ag="" (sa,="" ke,="" non,="" id,="" hash,="" vid(unity),="" vid(xauth),="" vid(dpd),="" vid(nat-t),="" nat-d,="" nat-d,="" vid(frag),="" vid(?))="" from="">
9 09:34:23.170 13/04/11 Sev = Info/5 IKE / 0 x 63000001
Peer is a compatible peer Cisco-Unity
10 09:34:23.170 13/04/11 Sev = Info/5 IKE / 0 x 63000001
Peer supports XAUTH
11 09:34:23.170 13/04/11 Sev = Info/5 IKE / 0 x 63000001
Peer supports the DPD
12 09:34:23.170 13/04/11 Sev = Info/5 IKE / 0 x 63000001
Peer supports NAT - T
13 09:34:23.170 13/04/11 Sev = Info/5 IKE / 0 x 63000001
Peer supports fragmentation IKE payloads
14 09:34:23.170 13/04/11 Sev = Info/6 IKE / 0 x 63000001
IOS Vendor ID successful construction
15 09:34:23.170 13/04/11 Sev = Info/4 IKE / 0 x 63000013
SENDING > ISAKMP OAK AG * (HASH, NOTIFY: NAT - D, NAT - D, VID (?), STATUS_INITIAL_CONTACT, VID (Unity)) at 71.xx.xx.253
16 09:34:23.170 13/04/11 Sev = Info/6 IKE / 0 x 63000055
Sent a keepalive on the IPSec Security Association
17 09:34:23.170 13/04/11 Sev = Info/4 IKE / 0 x 63000083
IKE port in use - Local Port = 0xEB07, Remote Port = 0 x 1194
18 09:34:23.170 13/04/11 Sev = Info/5 IKE / 0 x 63000072
Automatic NAT detection status:
Remote endpoint is NOT behind a NAT device
This effect is behind a NAT device
19 09:34:23.170 13/04/11 Sev = Info/4 CM/0x6310000E
ITS established Phase 1. 1 crypto IKE Active SA, 0 IKE SA authenticated user in the system
20 09:34:23.170 13/04/11 Sev = Info/4 CM/0x6310000E
ITS established Phase 1. 1 crypto IKE Active SA, 1 IKE SA authenticated user in the system
21 09:34:23.186 13/04/11 Sev = Info/5 IKE/0x6300005E
Customer address a request from firewall to hub
22 09:34:23.186 13/04/11 Sev = Info/4 IKE / 0 x 63000013
SEND to > ISAKMP OAK TRANS *(HASH, ATTR) to 71.xx.xx.253
23 09:34:23.248 13/04/11 Sev = Info/5 IKE/0x6300002F
Received packet of ISAKMP: peer = 71.xx.xx.253
24 09:34:23.248 13/04/11 Sev = Info/4 IKE / 0 x 63000014
RECEIVING< isakmp="" oak="" trans="" *(hash,="" attr)="" from="">
25 09:34:23.248 13/04/11 Sev = Info/5 IKE / 0 x 63000010
MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_ADDRESS:, value = 172.26.6.1
26 09:34:23.248 13/04/11 Sev = Info/5 IKE / 0 x 63000010
MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_NETMASK:, value = 255.255.0.0
27 09:34:23.248 13/04/11 Sev = Info/5 IKE / 0 x 63000010
MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_DNS (1):, value = 172.26.0.250
28 09:34:23.248 13/04/11 Sev = Info/5 IKE / 0 x 63000010
MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_DNS (2):, value = 172.26.0.251
29 09:34:23.248 13/04/11 Sev = Info/5 IKE/0x6300000D
MODE_CFG_REPLY: Attribute = MODECFG_UNITY_SAVEPWD:, value = 0x00000000
30 09:34:23.248 13/04/11 Sev = Info/5 IKE/0x6300000E
MODE_CFG_REPLY: Attribute = MODECFG_UNITY_DEFDOMAIN:, value = TLCUSA
31 09:34:23.248 13/04/11 Sev = Info/5 IKE/0x6300000D
MODE_CFG_REPLY: Attribute = MODECFG_UNITY_PFS:, value = 0x00000000
32 09:34:23.248 13/04/11 Sev = Info/5 IKE/0x6300000E
MODE_CFG_REPLY: Attribute = APPLICATION_VERSION, value = Cisco Systems, Inc. ASA5505 Version 8.2 (1) built by manufacturers on Wednesday 5 May 09 22:45
33 09:34:23.248 13/04/11 Sev = Info/5 IKE/0x6300000D
MODE_CFG_REPLY: Attribute = MODECFG_UNITY_SMARTCARD_REMOVAL_DISCONNECT:, value = 0x00000001
34 09:34:23.248 13/04/11 Sev = Info/5 IKE/0x6300000D
MODE_CFG_REPLY: Attribute = received and by using the NAT - T port number, value = 0 x 00001194
35 09:34:23.248 13/04/11 Sev = Info/4 CM / 0 x 63100019
Data in mode Config received
36 09:34:23.264 13/04/11 Sev = Info/4 IKE / 0 x 63000056
Received a request from key driver: local IP = 172.26.6.1, GW IP = 71.xx.xx.253, Remote IP = 0.0.0.0
37 09:34:23.264 13/04/11 Sev = Info/4 IKE / 0 x 63000013
SEND to > QM ISAKMP OAK * (HASH, SA, NO, ID, ID) to 71.xx.xx.253
38 09:34:23.326 13/04/11 Sev = Info/5 IKE/0x6300002F
Received packet of ISAKMP: peer = 71.xx.xx.253
39 09:34:23.326 13/04/11 Sev = Info/4 IKE / 0 x 63000014
RECEIVING< isakmp="" oak="" info="" *(hash,="" notify:status_resp_lifetime)="" from="">
40 09:34:23.326 13/04/11 Sev = Info/5 IKE / 0 x 63000045
Answering MACHINE-LIFE notify has value of 86400 seconds
41 09:34:23.326 13/04/11 Sev = Info/5 IKE / 0 x 63000047
This AA is already living from 0 seconds, setting the expiration to 86400 seconds right now
42 09:34:23.326 13/04/11 Sev = Info/5 IKE/0x6300002F
Received packet of ISAKMP: peer = 71.xx.xx.253
43 09:34:23.326 13/04/11 Sev = Info/4 IKE / 0 x 63000014
RECEIVING< isakmp="" oak="" info="" *(hash,="" notify:no_proposal_chosen)="" from="">
44 09:34:23.326 13/04/11 Sev = Info/4 IKE / 0 x 63000013
SEND to > ISAKMP OAK INFO *(HASH, DEL) to 71.xx.xx.253
45 09:34:23.326 13/04/11 Sev = Info/4 IKE / 0 x 63000049
IPsec security association negotiation made scrapped, MsgID = 89EE7032
46 09:34:23.326 13/04/11 Sev = Info/4 IKE / 0 x 63000017
Marking of IKE SA delete (I_Cookie = 2617522400DC1763 R_Cookie = 029325381036CCD8) reason = DEL_REASON_IKE_NEG_FAILED
47 09:34:23.326 13/04/11 Sev = Info/5 IKE/0x6300002F
Received packet of ISAKMP: peer = 71.xx.xx.253
48 09:34:23.326 13/04/11 Sev = Info/4 IKE / 0 x 63000058
Received an ISAKMP for a SA message no assets, I_Cookie = 2617522400DC1763 R_Cookie = 029325381036CCD8
49 09:34:23.326 13/04/11 Sev = Info/4 IKE / 0 x 63000014
RECEIVING< isakmp="" oak="" info="" *(dropped)="" from="">
50 09:34:26.696 13/04/11 Sev = Info/4 IKE/0x6300004B
IKE negotiation to throw HIS (I_Cookie = 2617522400DC1763 R_Cookie = 029325381036CCD8) reason = DEL_REASON_IKE_NEG_FAILED
51 09:34:26.696 13/04/11 Sev = Info/4 CM / 0 x 63100012
ITS phase 1 deleted before first Phase 2 SA is caused by "DEL_REASON_IKE_NEG_FAILED". Crypto 0 Active IKE SA, 0 IKE SA authenticated user in the system
52 09:34:26.696 13/04/11 Sev = Info/5 CM / 0 x 63100025
Initializing CVPNDrv
53 09:34:26.696 13/04/11 Sev = Info/6 CM / 0 x 63100046
Set indicator established tunnel to register to 0.
54 09:34:26.696 13/04/11 Sev = Info/4 IKE / 0 x 63000001
Signal received IKE to complete the VPN connection
----------------------------------------------------------------------------------------
ASA 5505 CONFIG
: Saved
:
ASA Version 8.2 (1)
!
ciscoasa hostname
domain masociete.com
activate tdkuTUSh53d2MT6B encrypted password
2KFQnbNIdI.2KYOU encrypted passwd
names of
!
interface Vlan1
nameif inside
security-level 100
IP 172.26.0.252 255.255.0.0
!
interface Vlan2
nameif outside
security-level 0
IP address 71.xx.xx.253 255.255.255.240
!
interface Ethernet0/0
switchport access vlan 2
Speed 100
full duplex
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
passive FTP mode
clock timezone IS - 5
clock to summer time EDT recurring
DNS server-group DefaultDNS
domain masociete.com
access-list LIMU_Split_Tunnel_List note the network of the company behind the ASA
Standard access list LIMU_Split_Tunnel_List allow 172.26.0.0 255.255.0.0
outside_access_in list extended access permit icmp any one
outside_access_in list extended access udp allowed any any eq 4500
outside_access_in list extended access udp allowed any any eq isakmp
outside_access_in list extended access permit tcp any host 71.xx.xxx.251 eq ftp
outside_access_in list extended access permit tcp any host 71.xx.xxx.244 eq 3389
inside_outbound_nat0_acl list of allowed ip extended access all 172.26.5.192 255.255.255.240
inside_outbound_nat0_acl list of allowed ip extended access all 172.26.6.0 255.255.255.128
pager lines 24
Enable logging
asdm of logging of information
Outside 1500 MTU
Within 1500 MTU
local pool VPN_POOL 172.26.6.1 - 172.26.6.100 255.255.0.0 IP mask
ICMP unreachable rate-limit 1 burst-size 1
enable ASDM history
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0-list of access inside_outbound_nat0_acl
NAT (inside) 1 0.0.0.0 0.0.0.0
static (inside, outside) 71.xx.xxx.251 172.26.5.9 netmask 255.255.255.255
static (inside, outside) 71.xx.xxx.244 172.26.0.136 netmask 255.255.255.255
Access-group outside_access_in in interface outside
Route outside 0.0.0.0 0.0.0.0 71.xx.xxx.241 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
GANYMEDE + Protocol Ganymede + AAA-server
RADIUS Protocol RADIUS AAA server
Enable http server
http 172.26.0.0 255.255.0.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-3des esp-md5-hmac TRANS_ESP_3DES_MD5
Crypto ipsec transform-set transit mode TRANS_ESP_3DES_MD5
Crypto ipsec transform-set esp-3des esp-sha-hmac TRANS_ESP_3DES_SHA
Crypto ipsec transform-set transit mode TRANS_ESP_3DES_SHA
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
Crypto-map dynamic outside_dyn_map 20 game of transformation-TRANS_ESP_3DES_MD5
map outside_map 65535-isakmp ipsec crypto dynamic outside_dyn_map
outside_map interface card crypto outside
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
md5 hash
Group 2
life 86400
crypto ISAKMP policy 30
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH timeout 5
Console timeout 0
dhcpd outside auto_config
!
no basic threat threat detection
no statistical access list - a threat detection
no statistical threat detection tcp-interception
WebVPN
internal DefaultRAGroup group strategy
attributes of Group Policy DefaultRAGroup
value of server WINS 172.26.0.250 172.26.0.251
value of 172.26.0.250 DNS server 172.26.0.251
Protocol-tunnel-VPN IPSec l2tp ipsec svc
value by default-field TLCUSA
internal LIMUVPNPOL1 group policy
LIMUVPNPOL1 group policy attributes
value of 172.26.0.250 DNS server 172.26.0.251
VPN-idle-timeout 30
Protocol-tunnel-VPN IPSec l2tp ipsec
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list LIMU_Split_Tunnel_List
the address value VPN_POOL pools
internal TLCVPNGROUP group policy
TLCVPNGROUP group policy attributes
value of 172.26.0.250 DNS server 172.26.0.251
Protocol-tunnel-VPN IPSec l2tp ipsec svc
Re-xauth disable
enable IPSec-udp
value by default-field TLCUSA
barry.julien YCkQv7rLwCSNRqra06 + QXg password user name is nt encrypted privilege 0
username barry.julien attributes
VPN-group-policy TLCVPNGROUP
Protocol-tunnel-VPN IPSec l2tp ipsec
bjulien bhKBinDUWhYqGbP4 encrypted password username
username bjulien attributes
VPN-group-policy TLCVPNGROUP
attributes global-tunnel-group DefaultRAGroup
address VPN_POOL pool
Group Policy - by default-DefaultRAGroup
IPSec-attributes tunnel-group DefaultRAGroup
pre-shared-key *.
tunnel-group DefaultRAGroup ppp-attributes
no authentication ms-chap-v1
ms-chap-v2 authentication
type tunnel-group TLCVPNGROUP remote access
attributes global-tunnel-group TLCVPNGROUP
address VPN_POOL pool
Group Policy - by default-TLCVPNGROUP
IPSec-attributes tunnel-group TLCVPNGROUP
pre-shared-key *.
ISAKMP ikev1-user authentication no
tunnel-group TLCVPNGROUP ppp-attributes
PAP Authentication
ms-chap-v2 authentication
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
!
global service-policy global_policy
context of prompt hostname
Cryptochecksum:b94898c163c59cee6c143943ba87e8a4
: end
enable ASDM history
can you try to change the transformation of dynamic value ESP-3DES-SHA map.
for example
remove the encryption scheme dynamic-map outside_dyn_map 20 transform-set TRANS_ESP_3DES_MD5
and replace with
Crypto-map dynamic outside_dyn_map 20 the value transform-set ESP-3DES-SHA
-
Customer Cisco PIX 501 VPN connects but no connection to the local network
Hi all:
I am able to make a VPN connection to a PIX 501. The remote client is assigned an IP (192.168.2.1) also, but not able to access all the machines in the local network connected to the PIX.
I have attached the PIX configuration.
Advice will be greatly appreciated.
********************
6.3 (5) PIX version
interface ethernet0 car
interface ethernet1 100full
ethernet0 nameif outside security0
nameif ethernet1 inside the security100
enable password xxxx
passwd xxxxx
pixfirewall hostname
domain ciscopix.com
fixup protocol dns-length maximum 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol 2000 skinny
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names of
access-list 101 permit ip 192.168.1.0 255.255.255.0 192.168.2.0 255.255.255.0
access-list 102 permit ip 192.168.1.0 255.255.255.0 192.168.2.0 255.255.255.0
pager lines 24
Outside 1500 MTU
Within 1500 MTU
IP address outside dhcp setroute
IP address inside 192.168.1.1 255.255.255.0
alarm action IP verification of information
alarm action attack IP audit
IP local pool ippool 192.168.2.1 - 192.168.2.5
location of PDM 192.168.2.0 255.255.255.0 outside
PDM logging 100 information
history of PDM activate
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) - 0 102 access list
NAT (inside) 1 0.0.0.0 0.0.0.0 0 0
Timeout xlate 0:05:00
Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225
H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00
Sip timeout - disconnect 0:02:00 prompt Protocol sip-0: 03:00
Timeout, uauth 0:05:00 absolute
GANYMEDE + Protocol Ganymede + AAA-server
AAA-server GANYMEDE + 3 max-failed-attempts
AAA-server GANYMEDE + deadtime 10
RADIUS Protocol RADIUS AAA server
AAA-server RADIUS 3 max-failed-attempts
AAA-RADIUS deadtime 10 Server
AAA-server local LOCAL Protocol
Enable http server
http 192.168.1.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
SNMP-Server Community public
No trap to activate snmp Server
enable floodguard
Permitted connection ipsec sysopt
Crypto ipsec transform-set esp - esp-md5-hmac RIGHT
Crypto-map dynamic dynmap 10 transform-set RIGHT
map mymap 10-isakmp ipsec crypto dynamic dynmap
mymap outside crypto map interface
ISAKMP allows outside
ISAKMP identity address
part of pre authentication ISAKMP policy 10
encryption of ISAKMP policy 10
ISAKMP policy 10 md5 hash
10 2 ISAKMP policy group
ISAKMP life duration strategy 10 86400
vpngroup vpn3000 ippool address pool
vpngroup vpn3000 Server dns 68.87.72.130
vpngroup vpn3000-wins 192.168.1.100 Server
vpngroup vpn3000 split tunnel 101
vpngroup vpn3000 downtime 1800
password vpngroup vpn3000 *.
Telnet timeout 5
SSH timeout 5
Console timeout 0
dhcpd address 192.168.1.2 - 192.168.1.33 inside
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd outside auto_config
dhcpd allow inside
Terminal width 80
Cryptochecksum:xxxx
****************
The DNS server is the one assigned to me by my ISP.
My internal network connected to the PIX is 192.168.1.1 - 192.168.1.33 and the VPN ip pool is 192.168.2.1 - 192.168.2.5
"isakmp nat-traversal 20" can do the trick.
-
Unable to connect to the host server: a connection attempt failed because
Hi all
I install my host ESX server in vmware workstation. It works fine except when I am creating virtual machines.
I'm not able to install the operating system on the virtual machine and I get this error that appears inside the virtual machine.
Unable to connect to the host server: a connection attempt failed because the connected party did not respond after a certain time, or established connection failed because connected host has no
to answer. Do you want to retry?
My ESX server hosts have static IP addresses.
I've seen a few similar posts on this issue, but their solutions have not worked for me.
Best regards
Nathan
I think we confuse you. ESX server is running like a machine virtual within the workstation, correct? If Yes, then you must edit the vmx esx server with these entries monitor configuration file *. They can go anywhere in the file. Once those have been added, you should be able to run 32-bit virtual machines within the esx server.
-KjB
VMware vExpert
-
Add a vpn connection in ios 10, method chosen in IKEv2, but I don't have the remote ID. My VPN is created in Sonicwall, waiting for quick reply
Hi cmscan,
Thank you for using communities of Apple Support.
I see that you add a VPN connection using IKEv2, but you do not have the remote ID. I know it's important to be able to set up a virtual private network, you can connect using your iPhone. I'm happy to help you with this.
You must contact your system administrator to ensure that the settings that you must configure the VPN connection. Please see the iPhone user Guide for more information.
Have a great day!
-
VPN connection error - pppd limited
Hi I think I have a problem with OX, the captain and the networks, I sail perfectly with the team but since update stops running the VPN, I tried the possibility to go to recovery mode to 'disable csrutil' then ' sudo chmod u + s / usr / sbin / pppd "but it does not work when you use Netextender or FortiClient." I have another Mac with Lion and works properly the only difference I notice in the file 'pppd' Captain makes me 'limited, compressed' and only 'compressed' Lion I put a photo and a newspaper of netextender:
15/09/2016 10:15:59.271 [603 General info] NetExtender 8.1.788 for Mac OS X initialized
15/09/2016 path of the bundle app NetExtender 10:15:59.299 [General info 603] = /Applications/NetExtender.app
15/09/2016 createLogPanel() 10:16:01.045 [gui info 603]
15/09/2016 10:16:01.730 [config info 603] loading saved profiles...
15/09/2016 10:16:16.507 [connect info 603] user: "prueba".
15/09/2016 10:16:16.507 [connect info 603] domain: "abcd.hos."
15/09/2016 10:16:16.509 [connect info 603] Server: 'vpn.abcd.es:444 '.
15/09/2016 10:16:16.581 [603 general notice] connection to vpn.abcd.es:444...
15/09/2016 10:16:16.820 [General error 603] ERROR: SSL_connect: Undefined error: 0 (0)
15/09/2016 10:16:16.821 [General notice 603] retry...
15/09/2016 10:16:16.822 [General error 603] ERROR: SSL_connect: Undefined error: 0 (0)
15/09/2016 10:16:16.823 [General error 603] authentication failed: connection failed. See the log for more details.
15/09/2016 10:16:16.823 [General error 603] NetExtender connection failed.
15/09/2016 10:16:16.823 [General notice 603] SSL VPN disconnect...
15/09/2016 10:16:17.058 [General error 603] ERROR: SSL_connect: Undefined error: 0 (0)
15/09/2016 10:16:17.058 [General notice 603] retry...
15/09/2016 10:16:17.060 [General error 603] ERROR: SSL_connect: Undefined error: 0 (0)
15/09/2016 10:16:17.061 [General error 603] disconnect command failed
15/09/2016 10:16:17.063 [General notice 603] SSL VPN connection is completed.
15/09/2016 10:16:17.063 [config info 603] loading saved profiles...
15/09/2016 10:16:17.065 [gui info 603] connection failed. See the log for more details.
I think that the problem is a network file or because I put the wrong password and I cannot detect this error. as I said the VPN working properly with another MAC using the same network.
Help...
You shouldn't be messing with the security features of the operating system.
Problems may have to do with the network, or client software that you use.
I start by making sure all the software are updated and then create a new entry, vpn, double control system that everything has been entered correctly.
FWIW, I use the built-in features of VPN on El Capitan to connect to my University regularly and without problem.
I'm not familiar with "Fortinet", and I suspect that you may need to be updated, or simply use the built-in VPN.
-
Mac OS El Capitan cannot share a VPN connection that is type of IKEv2
I have a few VPN connections, I share via Wi - Fi on my mobile device. Here's what I do:
I have a Macbook Pro with Ethernet port, I have some work VPN connections (some type of IPSec, some IKEv2). First I plug the cable to the Ethernet port, then I start a VPN (settings-> network-> Connect) connection, finally, I share the VPN (settings-> sharing-> Internet sharing) via Wi - Fi connection so that my mobile device can connect and use the VPN connection.
This work really well for me with IPSec VPN connections. But today, I tried to switch to an IKEv2 VPN connection, the VPN works well, but I can't share it on a mobile device via Wi - Fi, because I couldn't see the connection in the list "share your connection from" (Preferences-> sharing-> Internet sharing system)
Are there any technical problem that IKEv2 cannot be shared? Or is there that all parameters must be made so that all VPN connections must appear in the list to share?
evpn https://support.purevpn.com/IKEv2-Configuration-Guide-for-OS-x-El-Capitan-by-pur
Maybe you are looking for
-
Apple Watch is a day of rest on the main screen
I noticed this morning that my Apple Watch is one day behind the main screen. The calendar is correct, however. Is there any solution for this?
-
Satellite A500-1GL upgraded with keyboard backlight, but do not work
Hello I have a laptop Toshiba A500-1GL.I wanted to upgrade with a backlit keyboard, so I went to an authorized Toshiba reseller in my area (Portsmouth, UK) and after checking the laptop, they said yes, it supports a backlit keyboard and it cost aroun
-
ENVY 5530 printer takes forever to print my photos
Envy 5530, just bought and put in place 2 days ago. Impressions in time resonable E-mail, pages of sites on line; but when I try to print from my personal computer, Photo Gallery, it may take 10 to 15 minutes for printing. The first day it accelerate
-
Cannot download office XP 3 packages.
Running Microsoft XP. Get the error message "the feature you are trying to use is on a cd rom or other removable disk that is not available. Insert the standard floppy Microsoft XP, and then click OK. "I use an older Dell and it came not with all dri
-
The reader of the post is a kernel PNP, NJC, the same USB port recognizes a 190 GB WD drive