Detect direct P2P connection attempts

Similar Questions

• RTMPS connection delayed due to the direct connection attempt

  Hello world

  I have a big problem with the way the RTMPS connections are initiated in flash player.

  One of my customer network infrastructure does not allow direct connections to my server via port 443, but allows connections proxified (using the CONNECT method).

  The problem is that flash player expects the direct connection attempt to fail before trying the proxified... connection and on this direct infrastructure network connection timeout is 20 s (I can't change that).

  Users must wait for this time to connect to the server...

  Is there a way to tell the flash player do not attempt direct connection, or do not wait for this connection Timeout?

  Perhaps a directive in the automatic proxy configuration (.pac) file?

  I already tried every NetConnection proxyType values of parameter without success.

  Any help would be appreciated!

  You mentioned the 'CONNECT' method Have you tried "CONNECTOnly" that requires to initially use the default CONNECTION method and it is not always obey?

  Documentation on NetConnection.proxyType:

  Set the proxyType property before calling the NetConnection.connect() method.

  ...

  If the property is set to "CONNECTOnly", the player first attempts to use the CONNECT method. If this fails, there is no relief.

• My Dell V313w stopped printing/scanning mode wireless or with a direct USB connection after working flawlessly for 2 years

  My Dell V313w stopped printing/scanning mode wireless or with a direct USB connection after working flawlessly for 2 years - any changes made on the network wireless to our knowledge.  Printer works fine in USB mode on old Windows 2000 office.  Network sees the devive asked to detect devices.  Wireless to the printer hardware is perhaps not handshaking...?  Please let know us that he is a very curious pnnc.

  Windows 7 is updated as well as the print driver.  Thank you.

  Hello abir.

  Thank you for giving us the opportunity to help you with your concern for Windows.

  From your post, it seems that you cannot print from Windows 7-based computer.

  When you say "no changes made on the network wireless to our knowledge", which is the type of network you're talking about? (Workgroup, domain)

  It is a difficult problem to diagnose because there are many printers on the market and many reasons why it could not work.

  We will try the steps from the following link and check if this solves the problem.

  Why can I not print?

  http://Windows.Microsoft.com/en-in/Windows7/why-cant-i-print

  You can also check this link:

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Response with the State of the question, too, let us know if you need help with Windows problems and we will be happy to help you.

• P2P connectivity

  Hey people

  If you don't mind, I have a small question:

  How can - get customer results as here: http://cc.rtmfp.net/

  Stratus Server allow same information as associated server matthew done (connectivity info)?

  It would be cool if my program could tell the user "Hey, your p2p does not work, please configure your NAT.

  For now, it's a bit strange: some users may connect to the server of Stratus of appointment, but they cannot communicate with their peers, and they never get onPeerConnected. I just go into that waiting times and relief of FMS, but it's quite unstable, and it takes time to check.

  in LCC, there is 'isp2p', that has the value true or false (depending on the client is able or not to use p2p), which appears just after the client is connected to the ACC meeting server

  It is really awesome and it would be nice to know if there is something equal to that of stratus

  Thank you and keep up the great work, its really a big leap into the future * thumbs up *.

  We have considered (and have not totally rejected) adding se Stratus function.  Currently we are leaning far including directly in the Stratus, but (as it is today) it could still be used as a parallel service since you can open several NetConnections.  The se results are diagnosed, and not predictive, so it is not always a good idea to run its tests, nor to avoid trying to make P2P connections due to unfavourable results.

  We will certainly take your request into consideration when we look at the future characteristics of the Stratus service.

  -mike

• Try to set up a direct parallel connection between two computers in Windows XP Home edition

  I tried to set up a direct parallel connection between two computers in Windows XP. I have the right cable (CAT 5 Ethernet connection) and you can set up the connection on my own laptop, but when I go through the installer on another laptop it create new connection-establishment of advanced connection--> when the next window opens asking me to choose between "accept incoming connections" and "connect directly to another computer" (which I need to select) for the second option is grayed out and not can not be selected.

  The same thing happens when I try to implement the same connection between my laptop and the desktop we have. All of these computers are running on Windows XP service pack 2. I really need help with this because I'm about to start pulling my hair.

  Any help would be very, very, much appreciated.
  Thank you

  Hello

  Check it please this subject http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=3423&messageID=11170

  I hope this will help you.

• Audio event system has detected a device connection event audio location description of the Panel right-Black Jack

  I have no sound on my Dell inspiron 6400. Volume is not muted, sigmatel peripheral is enabled, hardware (speakers laptope) work, drivers have been updated and reinstalled.  Windows xp service pack 3.  The problem occurred after that children were playing a game of Dora on CD.  Above the popup of the event (System event Audio Audio System has detected a device connection event audio description location of the right panel Black Jack) appears.  Can get sound by using an external speaker.

  I note a number of comments suimilar on other sites but no resolution on these offers from

  If you go into Device Manager, you see a yellow fringe (!), which reports an error?

  To access the Device Manager in Windows XP:

   

  1. Click Start and then click Control Panel.

  2. Click the performance and Maintenance link.

     Note: If you see the Classic view of Control Panel, you will not see this link. Simple, double-click on the System icon and go to step 4.

  3. In the performance and Maintenance window, click the icon at the bottom of the window .

  4. In the System Properties window, click the hardware tab.

  5. The hardware tab selected, click the Device Manager button.

  Double-click sounds and game controllers.
  This will bring up a dialog box. From there you can update drivers, see the details of driver and driver rollback.

  If you uninstall CD Dora, you are able to get her back? It may be a conflict with the 3rd party product.

  Please let us know.

• Linksys does not detect not internet connection.

  My linksys router hotspot does not detect my internet connection. My internet connection is clear. How would I fix this? Help, please.

  Hello

  You need to reset the Linksys router and then check if the problem persists.

  Note: you need to contact Linksys in order to reset the router.

  Hope this information helps.

• My computer does not my router Linksys detect my internet connection. Also, I am unable to download itunes and I am no longer able to sync my windows mobile phone.

  connection and download Internet problems

  My computer does not my router Linksys detect my internet connection.  Also, I am unable to download itunes and I am no longer able to sync my windows mobile phone.  How to solve these problems?  so that my programs to work, I need these features.

  Hello

  1. you are using a wired or wireless?

  2 have you made any changes to the computer before the show?

  3. you receive an error message when you try to connect the Linksys router to the computer?

  4. what exactly happens when you try to update I Tunes?

  5. you receive an error message while updating I Tunes software?

  Please provide more information on the issue so that we can better help you.

  In the meantime, you can try the steps of troubleshooting provided in the links below and check if the problem persists.

  How to troubleshoot possible causes of Internet connection problems in Windows XP

  http://support.Microsoft.com/kb/314095

  In Windows network connection issues

  http://support.Microsoft.com/kb/313242

• How is it that a computer which works very well with a direct Ethernet connection won't work with a switch, however any other computer using the same port, cable, ect, and so on, can?

  Switch issues. Help, please.

  How is it that a computer which works very well with a direct Ethernet connection won't work with a switch, however any other computer using the same port, cable, ect, and so on, can? We already checked the firewall as a question, that it was not, and now, we are puzzled.

  Well, I know that the issue is long-term... believe me, it's a long, but as they say, the devil is in the details. Anywho, the question is, my grandfather has a HP laptop, which for two years has been able to run through a Linksys switch to his router and connect its printers to his laptop. About two months ago it suddenly doesn't work like that. Now, it works fine if it plugs directly into the router/Ethernet. My uncle suggested that the switch was bad, but after testing the same port, cable and all, the switch worked well for him. ' GRAMPS really needs this answered, but someone else, it is called can not understand and now I, in turn, ask you all for what you can offer. Here are the ideas that we have already discredited.

  -Switch bad: as above, is that this particular laptop, even under identical conditions, the works of my uncle very well.
  -Bad NIC: debunked through the fact we connected to the computer directly to the router and it worked fine.
  -Bad configuration of the firewall: we have disabled the firewall (please do not notice, he wasn't the smartest idea, we already know) and even if she recorded the switch exists, the internet is always triggered when you are connected with the switch.

  Thanks in advance for any assistance that you can provide and Merry Christmas to you all.

  It would be useful to consult the results of the ipconfig/all command both when it is connected to the switch and when it is connected directly to the router.  In addition, what is the model of the switch?

  To save the manual copy and the new hits of the ipconfig/all command output-

  First connect through switch.
  Open a command prompt window (start > run > cmd > OK)
  Type the following lines in the black command prompt window and press ENTER after each line

  echo "Connected via the button" > "% UserProfile%\Desktop\ipinfo.txt".
  ipconfig/all > "% UserProfile%\Desktop\ipinfo.txt".

  Now connect directly to the router, type the following lines in the command prompt window and press ENTER after each line

  echo "Connected to the router" > "% UserProfile%\Desktop\ipinfo.txt".
  ipconfig/all > "% UserProfile%\Desktop\ipinfo.txt".
  Notepad '% UserProfile%\Desktop\ipinfo.txt '.
  output

  Copy the contents of the Notepad window in your response (if you use the laptop when it is connected directly to the router) or close the Notepad window, and then copy ipinfo.txt of the laptop to the Gramps in a USB FlashDrive you can connect to any computer allows you to answer.

  You can delete ipinfo.txt on the desktop when you are finished.

• The connection attempt failed because the modem (or other connecting device) on the remote computer is out of use. Error 777

  I've always used my blackberry to tether my phone but I get the following error message and I can't solve this problem, any help would be appreciated, thanks!

  The connection attempt failed because the modem (or other connecting device) on the remote computer is out of use. Error 777

  Hello

  It seems that the blackberry is not more.

  Pass the installation attaches on the blackberry and make sure that it is configured properly and work.

• Error: "connection attempt timed out, please check the connectivity of the internet" when trying to connect to Cisco AnyConnect 2.5 on Windows 7 x 64 computer with modem usb wireless HSIA.

  Original title: issue with Cisco AnyConnect 2.5 on win 7 x 64 when connecting to the internet using wireless HSIA usb modem.

  I have win 7 x 64 enterprize edition on my laptop.

  I have problems with Cisco anyconnect VPN client. When I'm on my corporate network it works fine.

  But when I connect to internet using HSIA modem usb wireless home form, client AnyConnect VPN will not connect. The error I get is "connection attempt has expired, please check internet connectivity.

  Please help me to solve this problem as soon as possible.

  Hi Manish,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet forums for assistance.

  I also recommend that you contact the VPN support to help:

  https://supportforums.Cisco.com/community/NetPro/security/VPN

• Windows Media Player cannot play the protected file. The player has detected that the connection to your hardware might not be sure

  I just bought the New Avengers movie with the digital copy. I moved it and now I can't watch it. I have "Windows Media Player cannot play the protected file. Drive detected that the connection to your hardware may not be safe. "when I click it. What now?

  Hi Jason,

  Thanks for asking this question to Microsoft Community.  I'll try and help you resolve the problem; However, I will need to ask you a few questions.

  Are you able to play other movies without any problem? Have you done a recent software or changes to the material on the computer?

  Here is a link with some good steps. Go through it and check if it helps. Also check out this article and see if it helps.

  Also, see the steps in the article and see if it helps.

  Hope this helps and let us know if you need more assistance. We will be happy to help you.

• What is the deadline for no connection attempts?

  Original title: access attempts.

  What is the deadline for no connection attempts? If my system is configured to block after 3 attempts, how much time must elapse before the meter is "reset"? For example, I am trying to login with an incorrect password twice, but I don't want to lock the machine. How long should I wait to try again? It is a system that is part of a network (2012 server and active directory).

  Thank you!

  It is easy to determine.

  Open a command prompt window

  Start-> all programs-> Accessories-> command prompt

  Then, enter the following command:

  net accounts

  In the output that follows, the 'locking threshold' is the number of missed passwords allowed before the lockout and the ' locking ' is the number of minutes that you will be locked, and the "Lockout observation window" is the time window in which there is lack of passwords.

  HTH,

  JW

• Cisco AnyConnect VPN Client (connection attempt failed because the network or pc problem cisco)

  Hi all

  I am trying to connect to my Cisco AnyConnect VPN Client but everytime I try, I get an error (connection attempt failed because the network or pc problem cisco)

  Can anyone help me please with this.

  Thank you

  Zia

  What is the local firewall on your computer?

• Monitoring VPN connection attempts

  I would like to be able to use the syslog messages that are detached from the ASA to monitor VPN connection attempts (successful or not). Looking at the posts system there are several codes that relate to this.

  I wonder if anyone has a good way to use syslog to do this? There are some codes that can be used for this information?

  Thank you.

  You can set the ASA to send syslog messages when the user connects and disconnects. There are a few types of 'remote access' as IPsec VPN, webvpn / without client anyconnect/ssl vpn client that you can follow.

  If you are using Clientless SSL VPN syslogs usually begin with 716xxx.  For example the syslog for connect is 716001 and disconnect is 716002.  There is a list of other Clientless VPN SSL related messages here. You can view the specific contents of each journal here:

  http://www.Cisco.com/en/us/docs/security/ASA/asa80/system/message/logmsg

  http://www.Cisco.com/en/us/docs/security/ASA/asa80/system/message/logmsgs.html#wp4776913

  If you use SSL VPN Client (SVC1.x, AnyConnect 2.x) syslogs usually begin with 722xxx. For example, the syslog for connect is 722022 and disconnect is 722023. There is a list of other customer VPN SSL related posts here

  http://www.Cisco.com/en/us/docs/security/ASA/asa80/system/message/logmsg

  http://www.Cisco.com/en/us/docs/security/ASA/asa80/system/message/logmsgs.html#wp4778697

  If you use the IPSec VPN client, you can follow a success to connect with 713119 (indicates the phase 1 completed), 713049 (indicates the complete Phase2) and disconnect with 113019. There is a syslog ipsec additional 713049 that you can follow for ipsec.

  http://www.Cisco.com/en/us/docs/security/ASA/asa80/system/message/logmsgs.html#wp4775678

  http://www.Cisco.com/en/us/docs/security/ASA/asa80/system/message/logmsgs.html#wp4775412 http://www.Cisco.com/en/US/docs/Security/ASA/asa80/System/message/logmsg

  http://www.Cisco.com/en/us/docs/security/ASA/asa80/system/message/logmsgs.html#wp4769539

  Here are some other notes to keep in mind:

  -You can tell that the logging levels you currently have on the command line ASA with 'show log '.

  -Newspapers that you send to a syslog server are controlled with the commands "Logging Trap". For example 'logging trap information' (level 6) or "trap alerts logging" (level 1)

  -You can tell what level of severity (i.e., alerts, critical, errors, warnings, notifications, informational, debug) each one connects through this link. As you can see by checking the link, those follow-up sign in or out as I've mentioned above are usually information (sev 6)):

  http://www.Cisco.com/en/us/docs/security/ASA/asa80/system/message/logsev

  http://www.Cisco.com/en/us/docs/security/ASA/asa80/system/message/logsevp.html

  -If you want to create a specific subset of the syslogs to send to a specific device, you can do it with a class or a list of logging:

  http://www.Cisco.com/en/us/docs/security/ASA/asa80/configuration/guide/m

  For example (class log):

  http://www.Cisco.com/en/us/docs/security/ASA/asa80/configuration/guide/m

  http://www.Cisco.com/en/us/docs/security/ASA/asa80/configuration/guide/monitor.html#wp1065253

  class check vpnc informational FRT

  For example (list of logging):

  http://www.Cisco.com/en/us/docs/security/ASA/asa80/configuration/guide/monitor.html#wp1065512

  log list mylist message 722022

  log list mylist message 722023

  logging trap mylist

  Don't forget to evaluate the positions that helped you and to mark it as resolved if you question has been answered.

  -heather