ACS 4.2 Cert generation and installation

Similar Questions

• I have ipod shuffle 2nd generation and need new charger (dock) can still buy these?

  I have ipod shuffle 2nd generation and need new charger (dock) can still buy these?

  Apple no longer sells the official replacement of the USB cable with the "cradle".  Do not buy the replacement USB docking cable for the current 4th gen (3rd generation) iPod shuffle, because it does not work with 2nd gen shuffle (the connector is different).

  There are 3 replacements of party, for example

  http://www.Amazon.com/eForCity-Sync-Charger-cradle-shuffle/DP/B0042EB270/

  There are other products similar, including some who do not have the cradle, and some who do not even have a cable (like this one)

  http://www.eBay.com/ITM/USB-data-sync-charger-cable-for-Apple-iPod-shuffle-2nd-G balances - / 221546931454

  Ensure that the product is described as being the shuffle gen 2  I'd go with one that has a docking station, because it maintains the shuffle at a constant specific position compared to the socket, which can be important for a shuffle gen 2.

• 2nd generation and 6th gen Ipod touch.  Can I continue to use both?

  I have an Ipod Touch 2nd generation and get a 6th generation one for Christmas.  I want to continue to use both.  I heard that the 2nd generation will not be able to use the most recent ios.  How can I use both?  Of course, it takes a lot less memory also.  I have not would care if they are not sync, but I don't want to plug an and destroy the contents of the other.  Should I configure them with different user accounts or?

  You want to keep the same Apple ID That's what your content is about.

  You can very easily manage different content on each device. I manage different content on my ipad and iPod and they have different iOS.

  Your other older will continue to operate, he won't be able to do everything that the 6th gen due to having an older iOS and probably less apps that can be installed on it.

  And then if you use it just for the music, there are no descendants.

• niHSDIO dynamic generation and Acquisition using LV configure Trigger VI

  Hello!

  My experience is limited within the environment of digital programming; Nevertheless, I have worked on this problem for a few days and would appreciate some comments if possible.

  I am trying simply to generate and acquire a duty cycle of 50% of 8 MHz TTL pulse train on a PIN DIO of the PCI-6541 and acquire back from the signal on another axis of DIO. I have a connector corresponding to the embedded 6541 VHDCI connector which of course the generation and acquisition DIO welded pins to provide a loopback effect.

  In short, I use the niHSDIO configure Trigger VI (instance--> start Trig: SW), niHSDIO send software Edge Trigger VI and write Named Waveform VI (instance--> data: 1 D U32) in the generation section. For the section of the acquisition, in short, I use the VI of waveform Fetch niHSDIO (instance--> single record: WDT).

  I see results in the waveform acquired showing the generated and acquired digital TTL pulse on the respective DIO pins train, but I can't seem to get my 8 MHz frequency requirement. In addition, the lower part of the assignment of pin DIO, more frequency. Unfortunately, due to the configuration system required, I have confined myself to pin 12 DIO for the generation of digital pulses. Even with a 50 MHz clock frequency, I'm ~ 6 kHz of frequency acquired max. I looked at changing the parameters of the wave form VI named write, but it is not possible because the VI call a library function node. I also tried to generate a waveform of 8 MHz through a VI of generator of digital model, but I do not believe, you can trigger on generated waveforms? It seems that you must generate data using a simple loop to as a counter and sending the result to the waveform VI named write. Are there other ways I can simply generate and acquire a digital signal of TTL of 8 MHz (no external connection)?

  In any case, any kind of feedback would be greatly appreciated.

  Thanks in advance for your time.

  Dan

  Dan,

  Sorry about the nomenclature.  I usually use 0 x or 0 b for indication of radix, it is not necessarily a kind of standard, just what I used in my old days of the Assembly.

  Looks like you have a knowledge about the data.  Basically the material is just save in DRAM an array of words of 32 bits, with each bit corresponds to a data channel and each element being generated to the sampling clock rate you enter to your vi.  Everything else is just easy data manipulation or usage.  The interleaving method is just as I like to create a toggle model.  You can easily do a loop with an inverter and feedback node or use on the construction in screws to signal generation.  In addition, you can use the software digital waveform editor or control panel test to generate the county or toggle modes.

  Give us an update when you enter the laboratory and let us know if you encounter any other disorder.

• Hi.I download Microsoft Security Essentials and installation becomes a problem with the code: 0 x 80070643. If you can help me...

  Hi.I download Microsoft Security Essentials and installation becomes a problem with the code: 0 x 80070643. If you can help me...

  Support Microsoft Security Essentials forums
  http://social.answers.Microsoft.com/forums/en-us/category/MSE

  Can I install Microsoft Security Essentials [or any other anti-virus/anti-spyware application] to clean my already infected computer?
  http://social.answers.Microsoft.com/forums/en-us/msescan/thread/87058857-D181-4019-a723-efd9a49d9275

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows Vista business is update, download and installation; even when the update is set to manual.

  I put the manual update manually. But despite this it keeps update, download and installation. Sometimes I turn off a few updates and suddenly, after a few hours, these unwanted updates begin to update! This is a joke, very annoying and the invasion of privacy!

  Could be group policy... .getting applied on your system... Best regards, Sohail Patel "MCSE 2003 | ITILv3 | "A journey of a thousand miles begins with a first step."

• After reformatting and installation, activation, I get a message that I don't have a valid copy of XP. Get errors from each Web site for certificate errors. Any ideas?

  Validation problem

  After reformatting and installation, activation, I get a message that I don't have a valid copy of XP.  Get errors from each Web site for certificate errors.  Any ideas?

  I think I found that the time and date on the pc was showing Jan of 2002.  Seems to be loading of updates now!  I hope that this will solve.

• KB2572073 security update is to repeatedly download and installation

  Hello
  KB2572073 security update is to repeatedly download and installation. When I check on Windows Update reports installed successfully. How can I fix it?

  Hello
  Thanks a lot for your answer. I followed the actions in the link provided, but the problem persisted. To fix it I had to remove the .NET Framework and then reinstall it by using the following procedure. That solved my problem.

  Thank you very much for your help.

  Step 1: Remove the .NET Framework using the removal tool

  ================================

  1. download the tool from the following link:

  http://CID-27e6a35d1a492af7.SkyDrive.live.com/self.aspx/Blog_Tools/dotnetfx_cleanup_tool.zip

  2. save the zip (dotnetfx_cleanup_tool.zip) file from the link above on the local desktop and extract it.

  3. double-click on cleanup_tool.exe to run the tool.

  4. follow the instructions given.

  In the "cleaning product:", please select ".NET Framework - all versions.

  5. click on 'clearing '.

  6. restart the computer.

  Note: Once we have removed the .NET Framework, some applications that have need of .NET Framework runtime database could lose their functions. It's just a temporary problem. The function will return to normal after the reinstallation of .NET Framework.

  After completing these steps, please go to the following suggestions to reinstall .NET Framework 1.1 and its updates.

  Step 2: Install the .NET Framework 1.1 and its updates

  ============================================

  Please download and install the following updates in the order.

  Microsoft .NET Framework Version 1.1 redistributable package

  http://download.Microsoft.com/download/a/a/c/aac39226-8825-44Ce-90E3-bf8203e74006/Dotnetfx.exe

  Microsoft .NET Framework 1.1 Service Pack 1

  http://download.Microsoft.com/download/8/b/4/8b4addd8-E957-4dea-BDB8-c4e00af5b94b/NDP1.1sp1-KB867460-x86.exe

  Security Update for Microsoft .NET Framework Service Pack 1 (KB2416447)

  http://download.Microsoft.com/download/6/D/C/6DC6FFA8-4585-4192-A366-85712491322D/NDP1.1sp1-KB2416447-x86.exe

  «Note: when the window "file download" appears, please click 'Save' and follow the directions to save the file to the desktop.» After downloading all the installation files, please double-click on each to install.

• Receive message and installation failure error code trying to update wireless driver

  Have tried to update the driver for my latitude d600, Dell wireless 1350 WLAN Mini-PCI Card from the website of dell and installation fails with the error 0xC0000135 code. After the second failure, (update the driver), I uninstalled the driver and reinstalled the driver to gain Dells web site. tried to update and cannot install the update again. The Mini-PCIcard could be defective or is - this software?

  Install .NET

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=262D25E3-F589-4842-8157-034D1E7CF3A3&displaylang=en

  MD MOEEN AJAZ KHAN - MCP, N +, A +.

• 5 updates are repeat time and time again the download and installation. How can I stop this?

  These 5 updates are repeating again and again after the download and installation. How can I stop this?
  Update of security for Microsoft .NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008 x 86 (KB2487367)
  Update of security for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008 x 86 (KB2656351)
  Updated for MICROSOFT.NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008 x 86 (KB2468871)
  Updated for MICROSOFT.NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008 x 86 (KB2533523)
  Update for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008 x 86 (KB2600217) upwards
  Whenever the foregoing downloads and installs and updates installed successfully. Then a few minutes later he agains says ready to install updates and it's the same updates. Even after restarting my pc, updates moved again.
  Please, I'm desperate to stop it.

  Very well. Welcome & thank you for your comments.

• Cannot install updates for WIndows - error 80070490 and installation disc?

  original title: error 80070490 and installation disc?

  Dell, Vista, x 64 laptop.

  I can not install updates, including Service Pack 2 and IE 8. I managed to fix the other error messages, but this one is a winner.

  I can't follow the steps here because I don't have an installation DVD. The laptop doesn't have a CD/DVD-ROM internal drive and did not come with a disc because everything was preinstalled. Even if I had a disc, my computer does not recognize the CD/DVD-ROM external drive when it is plugged in (a problem at a time!), so it would always help. "The System Update tool does not work on this machine, probably because of that pesky little" compatible operating systems: Windows Vista Service Pack 2 "requirement. I so need SP2 to download the tool which will allow my computer to install SP2? Nice little catch-22 there. I agree with the irony. I disagree with not being able to install updates at all, ever.

  Is it possible to re - install without a disk? Can I solve this problem at all or I'll have to take the laptop to Best Buy and ask them to do some voodoo Geek Squad to it?

  Hello

  Check if your computer has a recovery partition.
  If the computer has a recovery partition, use the recovery partition to restore the computer to factory settings.
  Note:   All programs and data will be lost.  You can make a backup of all important data and reinstall programs.

  You can also contact the manufacturer of your computer, and asking for a disc.

  Windows Update error 80070490
  http://Windows.Microsoft.com/en-GB/Windows-Vista/Windows-Update-error-80070490
  Please note: you must have a disk for Installation of Windows Vista with Service Pack 1 integrated in to perform an upgrade to your computer, like your computer with Service Pack 1.

  How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2

  http://support.Microsoft.com/kb/2255099

  Note: Run a repair installation will not damage files and applications that are currently installed on your computer. However, I suggest you to save all the important date of the computer before you perform the upgrade on the spot.

  Thank you

• Error7 message about the signature unidentified, the upgrade and installation of iTunes 10.5 for Windows Vista.

  Original title: error upgrading and installation of iTunes 10.5 for Windows 6.

  I tried all kinds of ways to solve this problem, but I can't seem to find a solution. This all started when I tried to update my iTunes to version 10.5. Then came the error message 7 on unidentified signature etc. I could not even run my iTunes more then. I started download iTunes again to repair and it just doesn't work. I don't have problems with the installation of my iTunes for the first time a year ago and upgraded whenever I allow it.

  All other methods I tried to correct the error includes:
  • Uninstall iTunes completely and everything that it supports the programs and files (Quicktime, supporter of Mobile, Hello, Safari etc.)
  • Download Quicktime separately after you have uninstalled it as suggested by other users in some forum.
  • Update the frame Microsot.NET as suggested by the Apple Support site.

  • Manually started the installation of such Windows program suggested by one of the answers on this site:

    a. click the Start button, and then type services.msc in the start search box and press ENTER.
    b. Locate the Windows Installer service.
    c. check that the status is started. If the condition column is empty,
    d. right-click on Windows Installer, and then select start.
    e. If you get error trying to force start the Windows Installer service, then try to change the Startup Type to automatic.
    f. restart the computer.

    I have tried for at least 10 times and I have not yet set and am frustrated. Would be really grateful a solution to this soon.

    Windows Version: Windows Vista Home Premium - Version 6.0 (build 6002: Servie Pack 2).

    Thank you.

  Hi Junetyl,

  What is the complete error message you get?

  Method 1:

  You can see the article next to the Apple support and check if it helps.

  Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  You can also consult the following article:

  iTunes for Windows: "Error 7" message when you open iTunes

  You can also try the following steps and check.

  Method 2:

  You can run scanning of the file system [SFC] checker on the computer that will replace missing or corrupt files & check if the problem persists.

  For more information, you can consult the following link.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Method 3:

  You can also perform a clean boot and check if you can install iTunes.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.

  You can also get in touch with Apple using Arthur support.

  Apple iTunes Support

  Hope this information is useful.

• Are the installation DVD of Windows Vista Enterprise and installation DVD of Windows Vista other than company completely different?

  Installation DVD of Windows Vista business and Windows Vista DVD installation, other than the company

  Are the installation DVD of Windows Vista Enterprise and installation DVD of Windows Vista other than company completely different? If so, how are they different?

  Hello

  This edition targets the enterprise of the market segment: it includes a superset of the Vista Business edition. Additional features include support for packets from the Interface user multilingual (MUI), BitLocker Drive Encryption, and UNIX application-support. Not available through retail or OEM, this edition channel sale will get distributed through Microsoft Software Assurance (SA). Since Vista Enterprise classes as a benefit of Microsoft Software Assurance, it includes several benefits HIS only, including a license allowing the execution of up to four virtual machines running a mixture of editions of Vista and the versions [13], access to Virtual PC Express and activation via the VLK. [14] Vista Enterprise supports up to two physical processors. [7] 64-bit Enterprise supports 128 GB of RAM

  Windows Vista Enterprise made salient

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Vista-Enterprise-highlights

  Compare Windows Vista

  http://Windows.Microsoft.com/en-us/Windows-Vista/products/compare

• Two questions about the ACS 5.1: password aging and allowing multiple disabled accounts

  Hello

  I test in ACS 5.1 password aging, and I discovered that you can have only one global setting for the password for all the accounts internal life. Is it possible to exclude some internal accounts of this global password aging policy? I would like to have number of accounts, passwords should not be aged at all...

  Second question: when I was testing password aging, I set myself to life of password in 4 days with warning after 2 days. All accounts in my test of the ACS configuration are now disabled, because 4 days has passed when I changed it. Is there a possibility to allow multiple accouns at once, or do I have to activate 500 internal accounts manually, one by one?

  Thanks in advance

  WM

  I'm not aware of any way to score internal as users with passwords as enver expire. This is done for admins ensure there is always an admin who can access the system

  In order to change the multiple/all documents for internal users, the following approach can be taken:

  1. Go to the list of internal users and press "Export" then 'Start export' and 'Save file' export user records to a csv file
  2. Edit the file. In the title 'active' column replace 'FALSE' to 'TRUE' for all records. Save the updated file
  3. To the page that lists internal users, tap "File Options", select "Update", and then click next to access the section "Import a file" Wizard. Select the file saved in step 2) and tap on finish

  Afetr imort is completed, all records of internal user should now display "Enabled".

• After download and installation of windows 10 upgraded, it windows restore 8 after you restart the computer

  After download and installation of windows 10 upgraded my laptop, the system restarts and shut off when I turned it on again it was restoring my old version of windows ie. Windows 8 and now when I run the wizard upgrade download everywhere again.

  Original title: 10 windows installation

  Hello

  Please contact Microsoft Community.

  I understand that you can not upgrade to Windows 10.

  I will definitely help you with this.

  I suggest you go through the links below:

  I suggest you to reset the Windows Update components. See the section manually reset the Windows Update components in the below article to reset the Windows Update components.

  https://support.Microsoft.com/en-us/KB/971058

  Registry warning: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows.

  You can download and upgrade to Windows 10 by ISO.

  Please see the following article from Microsoft to download Windows ISO 10.

  http://www.Microsoft.com/en-us/software-download/Windows10

  Reference: see the following Wiki article created by Andre Da Costa the How-to: Troubleshoot Setup and stop common mistakes during the Installation of Windows 10.

  http://answers.Microsoft.com/en-us/Insider/wiki/insider_wintp-insider_install/how-to-troubleshoot-common-Setup-and-stop-errors/324d5a5f-d658-456c-bb82-b1201f735683

  Reference: refer to the Wiki article created by Andre Da Costa on how: a list of things to do if the installation of Windows 10 fail.

  http://answers.Microsoft.com/en-us/Insider/wiki/insider_wintp-insider_install/how-to-a-list-of-things-to-do-if-Windows-10-Setup/eba3c864-d9fe-4F8E-9468-81b1f89473ed

  See also the link below:

  Refer to the suggestion given by Andre Da Costa replied on 10 April 2016:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_10-windows_install/unable-to-upgrade-to-Windows-10-from-Windows-81/1b2ed155-5541-43FD-809a-174fd08aad38

  Upgrade to Windows 10: FAQ

  https://support.Microsoft.com/en-us/help/12435/Windows-10-upgrade-FAQ

  I hope this helps. Please post back with the State of the question and we will be happy to help you further.