ACS 5.1 integration with WLC

Similar Questions

• ACS 4.1 compatible with WLC 6.0.196.0

  Hello

  I have to upgrade our WLC4404s from version 4.2.207.0 to 6.0.196.0 so that our new 1142N APs are supported. Is someone can you please tell me if I am required to upgrade to Cisco Secure ACS version 4.1 and 4.2 to stay compatible (Windows) Please?

  The WLC 6.0.196.0 notes publication to State "this product has been tested with CiscoSecure ACS 4.2 and later and works with any RFC-compliant RADIUS server."

  Thank you

  Brodie

  An upgrade is not required for the current features continue to work. You only need to upgrade to 4.2 improvements. 4.1 conforms to the RFC.

• ACS 5.3 integration with RSA

  Hi people,

  I joined the ACS 5.3 to AD.

  Now, my next goal is to integrate with RSA ACS so that all my Cisco devices must use the username and password of the pub.

  The enable privilege level should come from the OTP Token RSA.

  Is it possible to do such a thing with ACS 5.3?

  If yes how can I do?

  Thank you

  Maury

  I think that may try to make a rule in politics of identity based on the attribute of Service in the dictionary GANYMEDE +.

  (this is not tested and based on my memory would need your checking)

  (1) create a condition custom attribute service GANYMEDE + dictionary

  Elements of strategy > Session Conditions > Custom

  Create: Dictionary: GANYMEDE +; Attribute: Service

  (2) use generally in identity politics Device Admin

  Access policies > access > default device Admin > identity

  SSelect a rule based

  Customize the condition function 1

  Create a rule for when the Service is to 'enable '. Select the source of identity as RSA in this case

• ACS integration with Microsoft Active Directory Services

  Hi all

  I was responsible for developing the integration of GBA with MS AD. What I want to know is below assuming I have a software ACS or ACS device and the authentication protocol's RADIUS

  -What is the criterion of the announcement to integrate with ACS to device software

  -Should that AD hosted on the domain controller or not?

  -Otherwise, on what (DC, tree, forest, branch, flower, Fruit) the announcement must be hosted on?

  -What should I do to authenticate users logging into Cisco ACS Security Manager integrated with AD?

  -Are there other dependencies that I'll have to speak categorically in my description?

  Thank you

  Rishi

  First of all, I love the flower fruit one keep it up.

  If ACS is for windows, it can be installed on the domain controller or member server. For detailed information about installation tasks post must have full integration, please see the following link that contains fancy things you are looking for:

  http://www.Cisco.com/en/us/partner/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/installation/guide/Windows/postin.html#wp1041202

  If ACS is soultion engine then you need piece of software called remote agent to be installed either on the domain controller or member server, also check the following link for more details on how to integrate it with AD:

  http://www.Cisco.com/en/us/partner/docs/net_mgmt/cisco_secure_access_control_server_for_solution_engine/4.2/installation/guide/remote_agent/Rawi.html

  I hope this was informative for you.

  -----------------------------------------------------------------------------

  Please ensure good answers to rate

• ACS RADIUS timeout with WLC 7.0 5.0

  Hi guys,.

  I'm setting up a device Cisco Secure ACS 1120 running 5.0.0.21 ACS to manage the RADIUS of a Cisco WLC 5508 device query running the 7.0.116.0 version.

  • These devices have open communication on all ports - no firewall or ACL
  • they have successful ping communication

  The following statements illustrate some but not all debugging I did to make sure that each device works properly in isolation.

  • Using the simple windows (radserv2.exe) instead of the Cisco ACS RADIUS server
    • This works and the WLC gets answer my fortune Server RADIUS
  • Using a simple windows EAP client to query the ACS using the RADIUS protocol
    • This works and the FAC processes the RADIUS request and sends a response
  • Placed a customer wireshark on the network to inspect the time-out.
    • Wireshark saves the package to the WLC for GBA using port 1812 but does not see responses to GBA package

  At the moment I have the

  1. WLC accepting wireless client association and
  2. sending the query RADIUS (EAP - TLS, PEAP and EAP-FAST) for GBA,
  3. the WLC receives no answer and generates a timeout message and separates the client.
     1. Note this is not a rejection or a similar message, the simple ACS does not even the package. i.e. There is absolutely nothing in the logs of ACS to suggest that he had even received a package of radius of the WLC.

  In summary the WLC and GBA properly operate independently, but they do not communicate via radius.

  Any help appreciated thanks

  It seems that you use ACS 5.0 without tasks.

  For your information, the version of the product is now up to 5.2 and 5.3 ACS should soon be released

  I recall there was a problem with ACS 5.0 with WLC operations that has been resolved in patch for 5.0

  I'm not sure of the specific CDETS but can be:

  CSCsy17858 Any manipulation of Tunnel-Type & Tunnel-Client-Endpoint uploading incorrect

  ACS 5.0 has a rollup with all the patches being accumulated approach

  My recommendation would be to download the patch 8 for ACS 5.0: 5.0.0.21.8

  Patch can be downloaded from CEC

  To install a patch set a repository on ACS (cumulative patches are larger than 32 MB, you can not use TFTP to it), copy the patch file in the repository, click ACS CLI:

  # acs patch installs repository

• Router ISR 3945 with WLC

  Hi experts,

  I have 3945 router with integrated ISR WLC (NME-A-WLC25-K9),

  I need to know the details below:

  Do you have a any restriction to use AP models (I mean, it supports to all AP models including 3300 series LAP)?

  Can I integrate with WCS and ACS?

  How the different models (Configuration wise etc.) integrated this model integrated standalone or other

  any information on this subject, will be appreciated.

  I went through some of the binding of cisco on the product details and I tried to get details about the configuration, but unfortunately, I'm not able to get on the cisco site.

  Please share the knowledge.

  The material of the WLC module is identical to a 2125, so the same restrictions apply (cannot be the anchor point in a tunnel of mobility for example).

  Support of the AP is dependent on the version of the software only, so if you put 7.0 on your module you support all the APs.

  Nicolas

• Secure ACS Authentication and Authorization with SecurID

  I am able to authenticate connection attempts using an external database (RSA SecurID).  The problem is that everyone with a token is authorized to connect on any switch with priv15 or whatever I put (but no way to control who gets what access).  How can I allow users based on a certain type of belonging to a group?  The SecurID server is already integrated with LDAP, it only checks to see if the user exists in the database.

  I need to create two groups, or even only allow a single group and deny everyone, but anyone in the organization with a token is allowed to connect.  I can't find guides who do anything beyond authentication when you use a SecurID token.

  Thank you.

  Hello

  Have routers and switches, you given the command "authorization exec default group aaa GANYMEDE", it seems that you have only defined authentication on devices. When the control is in place, user access privileges may be governed by the ACS. In network administrator access by default policy (if you are using the default strategy for GANYMEDE), to set the authorization rule to verify membership in a user group and provide the appropriate profile of shell. Make the default rule to give DenyAccess shell profile to other users.

• Integration with 50G

  Hello!

  Well, when I tried to compute the definite integral of | Sin x | I received the message cannot find the signin [0, 2 ft].

  

  I went in RPN mode, and this error persists. I then used [RS] [ENTER] to get the numeric result, and after awhile, I got the correct answer 4. But I can't get the answer simplely by clicking [EVAL].

  I also tried to calculate the antiderivative, and the correct answer returned Calculator -cos (x) * sign (sin (x)). I was wondering why the calculator produces an error when they apply for an accurate result (not digital, without .).

  Jack

  confirming the latest set of equations:

  

  EVAL would be = - 1

  and -> limit X PI - 0 = 1

  and the limit X-> PI = cannot determine.

  So, there's a singularity...

  Unfortunately, because of the resolution of the screen of 50 G, when the resulting equation for the indefinite integral is drawn, clear breaks in the plot IP and 2 * PI are not 100% clear.

  However, the subsequent calculations confirm that they exist.

  This is what has been shown that when the original integral from 0 to 2PI of | Sin (x) | is calculated,

  It is clear that the 50G automatically sets ON RIGOUREUX, even if it is not enabled in the (likely due to the function absolute value in the equation) indicators.

  THE rigorous is perfectly reasonably expect when the EXACT mode is selected with a function of absolute value.

  now for a pencil and paper method:

  | Sin (x) | is sin(x) from 0 to PI

  | Sin (x) | is - sin (x) IP to 2PI

  so...

  integral from 0 to 2PI of | Sin (x) | can also be expressed in

  integral from 0 to PI of Sin (x)

  +

  integral of the AP to 2PI of-sin (x)

  

  in EXACT MODE (strict mode setting is more questions)

  When EVAL would be = 4.

  I can refer you to a message done previously by Bernard Parisse (one of the developers of CASE).   Bernard said that the CASE cannot intercept all EXACT integration singularities (but it report some).

  Regarding the digital approximation method (help-> NUM) to get the result... I can't offer no answer as to the reason that the singularity is resolved.

  I've never seen a single post indicating what type of digital approximation algorithms are used for approximate integration with the 50G.  Of course, the digital approximation algorithms are distinguished by exact calculations.

  Finally, FYI, here is another good example of the use of 50G with an integral and having to use a bit of paper and pencil methodology (in this case, the method of cauchy principal value) to solve the 50G of the singularity.

  /T5/calculators/50g-numerical-integration-with-singularities/m-p/5678169#M11440

• Is there a work around to show the Site identity button when the integration with facebook like/send etc. It disappears when it comes to the page, it's because of the iframe can be done if anything.

  Is there a work around to show the Site identity button when the integration with facebook like/send etc. It disappears when it comes to the page, it's because of the iframe

  What can be done if anything.

  Pages that use "mixed content" (parts of the use of the HTTP page and some use HTTPS) are not secure against tampering, they will not display the site identity button. To resolve this problem, make sure that external resources you are incorporation are available over HTTPS and you use HTTPS to nest them.

  For example, to iframe widgets like the Facebook 'Like' buttons, make sure that your iframe use src = "https://192.168.1.20 /...". »

  See also discussion here: http://stackoverflow.com/questions/3587021/facebook-like-button-breaks-https-ssl

• CRM integrated with MS Project Management

  Hi Expert,

  On the CRM integrated with MS Project Management, there any company always do this?

  In fact, there are only certain configurations or it's really complicated customization?

  The result of the integration is really effective and efficient?

  Can share with me the practice of MS Project to the planning of resources management?

  Thank you!

  Hello

  The question you posted would be bettersuited in the TechNet Forums. I would recommend posting your query in the TechNetForums for more assistance:

  http://social.technet.Microsoft.com/forums/da-DK/projectserver2010general/threads

• While freeing up disk space, I accidentally deleted MSOffice, which is integrated with my HP 1000

  While freeing up disk space, I accidentally deleted MS Office which is integrated with my laptop HP 1000. How to restore my MS Office 2010 Starter? HP predict that if the product is still in warranty period?

  I tried restoring the setting factory but without any real help. Please help me!

  Kind regards

  Ron

  Once Office Starter is removed there is no way to reinstall. Even make a system back to factory settings recovery will not reinstall it.

• SX 20 integration with VCS

  Hello

  Is it possible to integrate 20 SX with VCS.

  Because our customer want to integrate with their MS Lync TP, so found that VCS can do this job. Then please suggest...

  Here also to point out that we are planing to use the public IP address for SX 20 to receive incoming calls from the public IP address, as it will be integrated with ISDN gateway.

  Details of the product for this solution:

  VCS

  SX 20

  TP ISDN Gateway

  Thanks in advance...

  Kind regards

  Daniele

  Yes, its possible, check this.

• Replacement of 6000 MXP Integrator with unique display. C40 SX20 vs?

  I have to make a quick decision and my CISCO sales representative is MIA :(

  We have a bunch of 6000 s MXP (package ingegrator), I would like to replace. They are simple installations with a single monitor on a roll integer grid.

  with output to the screen and a camera is there any point to spend the extra money for a C40 vs getting a SX20? From a point of view video capability they look pretty well. C40 more things gets me in the back, but it is a pretty simple setup.

  Just looking for what people here could do?

  Thank you!

  Although C40 and SX20 are two different solutions for videoconferencing from Cisco, an integrator (c40) and other is fast setting solution (SX20).

  The SX20 Quick Set is designed to provide multi-party and Conference video to high definition with the flexibility to adapt to various configurations - all at a value price and size of the room.

  C40 is for Integrator supports for integration with 3 party like crestron devices, mixers.

  two take in charge the premium 1080 p solution.

  both are excellent solutions and are mind blowing in the feature and the feature as compare to the MXP series.

  You can't go wrong with either.

• Cannot save with WLC 4402 LAP

  Hi all

  I have cisco WLC (AIR-WLC4402-12-K9) with two LAP (AIR-LAP1131AG-A-K9) connected to move and one of the TOUR is able to register with WLC while the other was autonomous AP which has been converted to KNEES who fails to register with WLC. I see that the AP is able to enter the Ip address and even joined the WLC but fails to register. Please help us solve this problem. I have attached all papers relevant to this case. Waiting for your answer.

  FYI I aimed below URL, but could not able to figureout the reason.

  http://www.Cisco.com/en/us/products/ps6366/products_tech_note09186a00808f8599.shtml

  I don't understand.  You have TWO 2 1131AG.  We joined for the last two days and another recently joined.  Say the other keeps "bouncing"?

  Have you checked if the WAP is declining because of the power?

• Integration with the PIX IDS firewall

  I read the Release Notes for Cisco Intrusion Detection System Sensor Version 3.0 S4 (1), and tripped on the new features of this version it pretends the integration with the PIX firewall

  How do implement you this? What kind of integration offer?

  Instructions for the sensor and the basic configuration of PIX can be found here:

  http://www.Cisco.com/univercd/CC/TD/doc/product/iaabu/csids/csids8/13870_01.htm#xtocid23

  Instructions for sensor and PIX SSH configuration can be found here:

  http://www.Cisco.com/univercd/CC/TD/doc/product/iaabu/csids/csids8/13870_01.htm#xtocid16

  You can configure the sensor to connect to the PIX via telnet when

  using the PIX inside interface, otherwise you have to use SSH.

  SSH with 3des encryption is supported in version 3.0 or later

  sensors for connections of PIX.

  Warning: If you use telnet with a version 6.2.1 or PIX more late or if

  you want to use SSH with encryption on any PIX, so you

  need a patch for your sensor. If so, open a case of TAC and demand

  the latest version of nr.managed engineering. Reference

  [email protected] / * / for any question.