ACS 5.2 Access Services

Similar Questions

• ACS 5.1 - Ganymede + issue witch 'network access' access services

  Hello world

  can someone explain why Ganymede + cannot be used with the network access services?

  

  I know that Ganymede is mainly intended command authorization, but as I remember with ACS 4.2 it is possible. For example for the purpose of PPP.

  THX and regards

  Przemek

  GANYMEDE + applications cannot be managed by access with the Service Type «Peripheral Administration» services

  If the type is NetworkAccess, it will fail. Please check the Service Type defined for the Access Service 'VPM-access '.

• ACS 5.2 selection policy/access service attribute question

  Hello

  I use ACS 5.2.0.26 and formed the selection air Service to authenticate the PEAP wireless clients based on the suffix of the domain that is used by clients. If I use the IETF-RADIUS-RADIUS attribute: User name to do this, am I right to say that this corresponds to the 'roaming identity' as opposed to the actual connection of the users id?

  In respect of Access Services, I can use the system attribute: username that corresponds to real customers login id-based. My questions are:

  Is the IETF RADIUS: use attribute Name corresponds to the "roaming identity"?

  Can I use the system attribute: user name with access but not it seems with a selection of the Service strategy. Why is this?

  Thank you

  Andy

  Hello

  Is the IETF RADIUS: use attribute Name corresponds to the "roaming identity"?

  -> No.The roaming identity is specific to certain claimants and didn't always match the user name.

  If the roaming identity is cleared, %domain%\%username% is the default value.

  When 802. 1 x MS RADIUS is used as an authentication server, the server authenticates the device using the username identity of roaming of the Intel PROSet/Wireless software and ignores the authentication protocol MS-CHAP-V2 user name. This feature is the 802 identity. 1 x supplied by the authenticator. Microsoft IAS RADIUS accepts only a valid username (dotNet user) for EAP clients. When 802. 1 x MS RADIUS is used, enter a valid user name. For all other servers, this is optional. Therefore, it is recommended to use the desired domain (for example, [email protected] / * /) instead of a true identity.

  Can I use the system attribute: user name with access but not it seems with a selection of the Service strategy. Why is this?

  -> Because this attribute is not valid for function selection policy. It was designed this way... we can't do anything.

  HTH,
  Tiago

  --

  If this helps you or answers to your question if it you please mark it as 'responded' or write it down, if other users can easily find it.

• Failed to start remote access service

  Hello

  I get a vps and I install ca and iis and the remote access service

  I allow it as a vpn server

  When I try to run the remote access service there gives me an error

  The Routing and remote access is dependent on the Remote Access Connection Manager service, which could not start due to the following error:

  The dependency service or group was able to start.

  I reslove this problem to run these commands:

  netcfg u ms_sstp

  netcfg - c p-i ms_sstp.

  net start sstpsvc

  net start rasman

  now when I am tempted to throw there gives me this error:

  The Remote Access Connection Manager service terminated with the following error:

  The system cannot find the specified device.

  So what is the problem?

  Thank you.

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Microsoft TechNet forum. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/categories

• Where can I get a download for Windows XP Service Pack 3 disc? I remote access service and cannot download it online.

  PeoplePC disconnected until the download is complete; Therefore, it loses data downloading and Service Pack 3 does not boot to Windows. Computer must be retrieved from partition-all installed programs must be re-installed or downloaded again. It takes some days with the remote access service.

  You can order a CD from Microsoft or download online.

  "How to obtain the latest Service Pack for Windows XP"
    <>http://support.Microsoft.com/kb/322389 >
  HTH,
  JW

• BlackBerry Curve 8520 smartphones cannot access services internet bb

  Changed my password on my work email, but can not access services internet bb to change on my phone. When I try to connect, my user name is not recognized. I can access the internet service of bb online and changed my email password and password internet services there. But I'm stuck on my phone and e-mails from work is no longer to arrive.  Can anyone help?

  Your BIS account is managed by your mobile service provider. They can reset if necessary.

  If you get stuck trying to return the Service directories, there are several terms contained in points than KB... one of them being to communicate with your mobile service provider, which can push them out.

• On a Mac ios10.10, using the online service export to PDF format, an error message appears, "year error occurred while trying to access services."

  Can you advise steps I might take now?  On a Mac ios10.10, using the online service export to PDF format, an error message appears, "year error occurred while trying to access services."

  Hi Ringdoc,

  Please see this: "Error has occurred when trying to access this service" when you sign in to Acrobat.com

  Let us know how it goes!

  Best,

  Sara

• ACS 4.2 denied Service service = shell cmd *.

  Hello

  I am trying to configure acs for auth to windows AD 2003 4.2, remote access is enabled.

  I get this error msg in GBA when I try to log in to our switch.

  Refused service service = shell cmd *.

  Any sugestion?

  Regdars Jan

  Jan,

  It seems that you have permission to order configured in acs. Make sure you have checked shell on acs---> defined group exec.

  Kind regards

  ~ JG

  Note the useful messages

• 40L3455DB - not able to access services online after firmware update

  After an update of firmware for my 40L3455DB, I was not able to access online services

  I have contacted the online support, but have no joy, and they say they're looking for him

  what lasts for 2 months

  has anyone else had this kind of problem

  I had also the message on my Toshi firmware update is available, but somehow, I can't install because for now everything works OK and I'm happy with it.
  I would like to know if you can temporary fix it if go back you to the factory settings.

  What do you think about this?

• Board access service impossible to replace or reinstall the DVD player:

  Ok. I watched all the videos and all the how made to remove the service Panel.  Remove the battery and then unscrew the two screws that willl not delete because they are dependants of spring.

  Mine has only one screw. Unscrew it. I have down can't want to breakthe Panel, but it seems even I am the only worldwide solicitor who has a Pavilion g6 with an access panel a ugly screws that will not come off unless I break.  Please send link to a service a panel live how to. Because I'm screwed.

  The mark on the service panel said "protectsmart" on it.

  I found this for a different but not for the g6 Pavilion model. I tried special screws under the battery but none have been found.

  What I have to tear and rip this thing out just to change a bad DVD player? How to open the computer hp laptop pavilion g6

  

  SOLVED! Figured it out. Because my own video: https://youtu.be/17U78DAEDsI

• ACS - the clean access server

  Hi guys,.

  I have a doubt about the own ACS and access server.

  The clean access server can do the job of the ACS?

  for example, act as a VMPS server, AAA server, or radius server.

  Thank you

  ACS is entirely different to serve own access. See the below url for more details

  http://www.Cisco.com/en/us/products/ps6128/products_qanda_item0900aecd803be813.shtml

• Have ACS pass the access list by user or group for Cisco 2600

  I wonder how I can configure ACS to when a user connects a router and authenticates to ACS, ACS pass back have an access to the router list based on user or group?

  With GANYMEDE, like this:

  http://www.Cisco.com/en/us/Tech/tk583/TK642/technologies_configuration_example09186a0080094656.shtml

  With RADIUS, like this:

  http://www.Cisco.com/en/us/Tech/tk583/tk547/technologies_tech_note09186a0080094032.shtml

• ACS 5.7 - access to tracking and reporting on a secondary server to the primary server

  My organization has an ACS deployment, consisting of three servers. Currently, the primary ACS server is also the newspaper collector. However, Cisco recommends to a secondary server in the log collector.

  I noticed that I have connection on the secondary server and click on "Monitoring and reporting", I am prompted to connect to the main server because that's where newspapers. I guess if the newspaper collector is on the secondary server and I click on "Monitoring and reporting" of the main server, I will ask you to connect to the secondary server.

  Is there a way of not having to connect twice (once to access the web interface and new access reports)? It seems that deployment of ACS should support a kind of function of single sign-on and once you are connected to a server, gives you access to another without having to log in again.

  Hi David,

  I know that the Cisco documentation mentions the school be the best practical paper collector, however, which in fact means is that the server acting as collector of newspaper should be not authenticate users.

  If your backend is the collector of newspaper that should be fine, as soon as it's not authenticate users (but secondary responds to this task).

  And related to the shift, that of right, independently on the server to which you connect, once you click on "Monitoring and reporting" you will be redirected to the collector of the newspaper and need to connect in it, unless you are currently on the newspaper collector and click on 'tracking and reports.

  SSO between servers would be a good thing but is not available.

  Note: Please mark as answer as appropriate

• ACS read only access to devices

  We are using ACS ver 4.2 and trying to setup users with limited access to our switches and routers.  Here's what we did:

  (1) created a user in ACS

  (2) create Shell permission Set - ReadOnly command

  Unmatched orders - deny

  Commands added

  Show

  output

  * This should limit the user to show command and exit only (correct)?

  3) established a group - support with the following parameters of GANYMEDE.

  Shell (exec) is checked

  Privilege level is check with 15 as the assigned level

  Assign permission to command Shell Set for any network - selected device

  ReadOnly - set current shell command authorization

  When the user connects to the router/switch, it seems that he has full access.  It can enter the enable config terminal command command.  Everything we want it to be able to do is to issue the command show.

  Any help would be appreciated.

  Please refer to this document

  http://www.Cisco.com/en/us/products/sw/secursw/ps2086/products_configuration_example09186a00808d9138.shtml

  and compare the config as you well say ACS config looks OK on the switch/router, you must also do the following command

  aaa authorization config-commands aaa authorization commands 0 default  group tacacs+ local aaa authorization commands 1 default  group tacacs+ local aaa authorization commands 15 default group tacacs+ local 

• Cisco ACS 5.2: How "service account" exempt from the life of password policy

  We have a GBA policy to disable the user account (user internal store name) after X days if the password is not changed.

  However, it creates challenges 'service accounts' servers NM. My goal is to exclude these password change service accounts. in other words, their passwords must not be updated.

  How to configure ACS to do this?

  THX

  Eric

  Hello

  I don't think it's an option.

  Dan