Action Center reported that Antivirus program or firewall Windows are disabled

Similar Questions

• Windows 7 Action Center reports that Kaspersky Internet Security is turned off

  Original title: Windows does not Kaspersky

  I have installed Kaspersky Internet Security 2011 but "Action Center" is not recognize that Kaspersky doesn't work. Action Center reports that it is turned off but Kaspersky istelf don't complain of nothing and is turned on.

  What can I do?

  A reinstall of the KIS solves the problem

• Windows Vista Security Center reports that I have no firewall protection or malicious software.

  Everything on my system was adequate and functional on 16/10/2010 with the Security Center notification that I was using Kaspersky 2010 with firewall protection and malware on the value.

  On 17/10/2010 update downloaded and installed windows 17 updated successfully. The system has been shut down, but restarting the system, the following Security Center said security problems that no firewall was there was no malware protection.

  After checking Kaspersky it said that all facilities are on and working.

  The Security Center also identifies a program Avanquest fix it is obsolete and did not provide security with a solution center to question. This piece of software has not served more than a year, and while it is still in the system, it is inactive.

  Anyone else has a problem with the last set of updates Vista?

  geoffreystone2

  Updates that took place after the restore point have been removed, if these programs need to be updated again (it is the restoration of the operating system - in fact, that's why it works).  It works simply on the updates of Windows, but on the updates or installations of any kind (except changes to the data).  This is not a problem and should completely (and was mentioned in my post above).  Reinstall the updates and you'll be fine here.

  System Restore may take a long time.  L ' turn off in the Middle can cause problems - problems, different problems and even serious problems.  If updates are still there (and you encounter other problems which essentially the same that you started with most of the time), then the system restore did not work or was not correctly filled (but it make some changes if some of your edits are no longer working at least partially and perhaps even completely) (, but just was not given enough time).  I suggest you try again and this time give him more time to finish - say a few hours at least, or maybe more, given the current circumstances.  To do this before you perform any relocation above because they will be lost again.

  I don't understand the issue of e-mail messages.  What do you mean by 'coded '?  What email program are you using?  I suspect that this may be the result of turning off the system before restoring it finished (or the problem with the system restore if it worked actually).  A successful restoration will solve I hope that whatever it is as well - but if we cannot get this to work, we need to abandon this effort at least for the moment.

  If this does not work, then I suggest you follow the advice of Malke (assuming that you have not already) and explain your efforts with the restoration of the system and the results that occurred as well so that they fully understand the situation.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows 7 Action Center indicates that Windows and McAfee Antivirus & Firewall are both disabled.

  Original title: Jlj1952

  My Windows 7 Action Center indicates that Windows and McAfee Antivirus & Firewall are both disabled. McAfee analysis shows that everything works. Looking @ my control panel shows Microsoft Firewall is enabled. Can someone tell me why I started getting these messages that no protection exists? Thank you.

  Kind regards

  James

  Hi James,

  1 did you change on your computer?
  2. do you get an error message?

  This problem could be related to Mcafee. Please temporarily disable Mcafee and check.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  If the problem does not persist, then there are certainly problems with Mcafee protection. In this case, please contact Mcafee support for assistance.

  Just reply with the results.

  Thank you

• WINDOWS 8 Action Center reports off firewall/anti-virus/antispyware, McAfee says that all are turned on and running. Can not get the corrected message.

  WINDOWS 8 Action Center reports off firewall/anti-virus/antispyware, McAfee says that all are turned on and running.  I tried to turn it on through the Action Center, but nothing happens.

  Thanks for the reply.  I appreciated the recommendation run malwarebytes because it gave me peace of mind knowing that he found nothing.  The error of origin correct auto in the last two days seemed so it was an update from Microsoft or a McAfee update that has straightened things.  Thank you once again.

• Action Center reports an error that reads "reconnect your drive, it is important."

  Action Center reports an error that reads "Reconnect your drive, it is important," the history of your files was disconnected, too long. to keep save copies of your files, reconnect your player an n, then run a backup.  Any help?

  Thank you

  I noticed that my D drive (sd card) drive back unknow question under him? I can put it is not to back up files from the file history and I don't get an error, but I prefer to have connected and backup my files... I hope someone can help.

• Action Center said that my spyware and antivirus protection is disabled.

  Hello

  I am currently using the 32-bit version of Windows 7 and I am currently using AVG Internet Security 2014 as my antivirus. Today, when I started my computer, the center of the action arises with 3 important messages. It is said that my spyware, antivirus and Firewall network are all off. Yet, when I open AVG 2014 it is said that it is up to date and I am fully protected. How to solve this problem? I click on the option 'Enable' in the center of maintenance for all 3 options and nothing has changed.

  Side note: I perform a system restore yesterday after my computer blue screened after installing new graphics drivers.

  It's probably windows has just been windows.

  HHM. If I wrote my own virus scanner and Windows does not recognize it, should I demand that Microsoft gets its act in order, or is it my responsibility to fix my code?

• WinXP SP3: Security Center think multiple anti-virus and firewall (cleaning) are running when not.

  It is after the removal of Security Tool virus.  I need to delete everything that is telling Windows (XP SP3) that there is a firewall and anti-virus (es) when they are not running.  I need to install real firewall and antivirus, but cannot.

  Fixed a problem.  I found this on the Avira forum.  Use BartPE to rename \windows\system32\wbem\repository (to... repository.org, so that I could get back in the case where this caused problems).  Then restarted.  Now that the real firewall and anti-virus that run really show in Security Center.  The entrance to the forum suggested run services.msc and stop the WMI service, and then do the renaming.  However, the name change was denied, that's why I used BartPE - boy, this thing is a lifesaver sometimes!  I appreciate the help I received from those in this forum.     Thank you, Steve

• Contextual Action Center box won't go away in Windows 7

  I have a Centre for pop up box in the corner of my screen.  It won't go away.  I did the back upward, but it won't go away.  any ideas?

  Hi Mischu21,
  
  Check out this TechNet article that describes how to disable the pop-ups Action Center:
   
  http://TechNet.Microsoft.com/en-us/magazine/dd492018.aspx
   
   
  Aziz Nadeem - Microsoft Support

• Center/security/firewall Windows are not not in services.msc

  I am running Windows 7 and I recently had a virus or malware that has Win 7 Security 2012. I ran RKill and Malwarebytes, SOPHOS antivirus CCcleaner and also spybot s & d. It says it has been removed, but my computer is still slow online. Occasionally, a Web page tab to randomly open in Firefox and it's usually something treating health of men or women. I can't access or also turn on my windows firewall or a defender, and when I look in services.msc, it is not listed. Any help please... it affected me the last 4 days. Thank you!

  This virus actually removes the registry keys responsible for Firewall service and this is the reason why you don't see more firewall in services.msc. Thread below should help restore you windows firewall.

  http://social.technet.Microsoft.com/forums/en-us/w7itprosecurity/thread/5366225a-46e7-4D6C-A389-8bd18a5c3aad

• Cannot open the message of solution in the Action Center in windows 7

  I got the solution in the windows 7 Action Center, but I can't open it. I don't know that my internet connection is good. How can I get the message of solution? Thank you.

  Same here, but I can have a work around.  Had a Windows 7 BSOD twice in a week.  Both times the Windows Action Center reported that he had a solution, but when I clicked on the link to view the solution, the Details of the Message screen says he was unable to download the solution and told me to check my Internet connection.  Clearly not the problem.  I clicked on the link "see all the problems that this applies".  Check-video equipment 2 errors and the other "stop unexpectedly" (BSOD).  Workaround: in an event random dumb luck, I clicked on the back arrow at the top of the Action Center to return to the display of the details of the Message, and as if by magic, instead of the same message on checking my Internet connection, it displays the solution!  Now, don't get excited too - the proposed '' solution '' is not really a solution for the BSOD or apparent problem with the NVIDIA graphics card.  Here you go:

  A problem with the NVIDIA graphics driver

  NVIDIA Graphics Driver has stopped working properly.

  An update of the driver, as appropriate, could prevent this problem does not happen.

  There are several ways to find and install the driver updates, but it's best to let Windows do it for you. Try the step below, which describes the process. If it does not produce a driver update that resolves the problem, try the remaining steps in the order shown.

  1. Look for the optional third-party updates

     Even if all the critical updates have been installed on your computer, the optional updates may be available for NVIDIA Graphics Driver, who have not yet installed. Here is how to use Windows Update to find and install the updates driver option:

     1. Click here to open Windows Update in Control Panel

     2. In the left pane, click check for updates to see if there are any optional updates available for your computer.

     3. If the optional updates are available, click the link to view and select the updates to install. (If you don't see this link, you may need to clickSearch online for updates from Microsoft Update).

        If no optional updates are available, go to step 2.

     4. Select the optional updates, you want to install (especially if they seem to be related graphics), clickOK, and then click install updates.

  2. Try to manually update the NVIDIA Graphics Driver

     If no optional NVIDIA Graphics Driver update was available in Windows Update, you can try the NVIDIA Graphics Driver update manually.

     Note
     It's best to let Windows automatically installs the drivers for your hardware, as described in step 1 above.

     If you decide to manually update the NVIDIA graphics driver, here's how:

     1. Click here to open the Device Manager if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

     2. In Device Manager, double-click display adapters, and then double-click the name of the NVIDIA Graphics Driver device running.

     3. Click driver , and then click set to update driver.

• When asked how you want to search for driver software, click search automatically for updated driver.

• Windows locate and install a new driver, if available.

• See the NVIDIA Corporation Web site for driver updates

  If no optional NVIDIA Graphics Driver update was available in Windows Update, go online to the following site to check for driver updates:

  Click here to go to find out if a solution or an updated version is available online on the website of NVIDIA Corporation

How to upgrade manually a pilot using a file downloaded

1. Click here to open the Device Manager

2. In Device Manager, locate the device you want to update, and then double-click the device name.

3. Click driver , and then click set to update driver.

4. Click Browse my computer for driver software.

5. Click on the Browse button and look for the folder that you saved on your desktop.

6. Select the folder that contains the driver files.

7. Click OK, and then click Next.

8. Follow the instructions to complete the driver installation.

Note
If you run the latest version of the NVIDIA graphics driver and you still experience the problem, we recommend that you contact NVIDIA Corporation or by the manufacturer for support, and additional information.

• Visit the Web site of the manufacturer of your computer for driver updates

  If NVIDIA Graphics Driver was preinstalled on your computer, check the Web site of the manufacturer of your computer for driver updates.

  How can I find the manufacturer of my computer?

  Click on the Start button , typemsinfo32 in the start search box and press ENTER. The manufacturer of your computer is listed as themanufacturer of the system in the right pane of the system information window.

  Click here to go online to see the contact information for most of the computer manufacturers

  How to upgrade manually a pilot using a file downloaded

  1. Click here to open the Device Manager

  2. In Device Manager, locate the device you want to update, and then double-click the device name.

  3. Click driver , and then click set to update driver.

  4. Click Browse my computer for driver software.

  5. Click on the Browse button and look for the folder that you saved on your desktop.

  6. Select the folder that contains the driver files.

  7. Click OK, and then click Next.

  8. Follow the instructions to complete the driver installation.

What is a driver?

A driver is software that allows your computer to communicate with hardware or devices. Without drivers, the hardware you connect to your computer (for example, a video card or a webcam) may not work properly.

• Windows 7 Pro Action Center shows current backup permanently

  Windows 7 Pro Action Center shows current backup permanently, even if it's not, I don't have a backup set and Backup and Restore cannot find a backup.

  Why can't Microsoft find a solution to this problem with the network or the corrupted/missing files? My system works fine even with this problem of current backup. So, I learned to forget. But it would be nice if Microsoft would solve this problem.

  Hi flintnodule,

  Microsoft can and will fix the issue for you, but because it involves dircet contact with the troubled pc the only way to do it is through remote assistance. that is to call you Microsoft and allowing the tech Advisor take control of your pc directly. THS can lead however still other problems that not all advisers have the same stanard in cognition, (I'm talking about previous experiances). That's why I stated measures for any user to repiar this problem themselves in over the answer, but for some reason not to many are eager to make they perfer to ignore the help and just complian. the way I used overkill stages of difficulty was the following. 1. removal of devices connected, 2. back up the system and all the files, 3. Defragment os. 4, everthing unistall, which is the third part. 5, prepare an external hard drive for windows by labelling and re-formatting upward (note do not quick format). 6, clean, install windows 7 but use the options to format your drive first. 7, do not install anything just to configure windows 7 to your configuration (test performance and reliability monitor if all ok). 8, perform an upgrade and after what game action center full tuning IE levels all the recommended and send information to all users. and set performance and reliability thanks to (allow) windows firewall. 9, Center of action for perform a full upward and the image of the value system and set it to your external hard drive. 10, test of reliability and performance monitor, once everything is ok and the Action Center indicates that it is active and there is no problem, you are ready to reinstall all of your software for your backup you make early.

  hope this helps

  your

  ASHLEY No.: 1 FAN OF MICROSOFT AND WINDOWS 7 do not forget if you tick the response as correct, vote for him as useful to help other users find a solution faster

• False issues action Center

  Hey,.

  Currently my Windows Action Center shows my Virus Protection and firewall off which are both wrong. I have run Norton 2010 and it works very well. When I open the Action Center and click on ' turn on ' it opens Norton but does not remove the question of the Action Center.

  Everything is up-to-date and I didn't have this problem in the first place, so I'm prosuming there is a problem with a recent installation. I installed Adobe CS4 on a trial a couple of days, but after a reboot, the problem was not there. When I turned my system on last night, it appeared and I can't solve.

  Except that the only thing that I have installed are games, any help would be appreciated

  See you soon

  Graeme

  Aslong as my system is safe it's all I'm really worried, I was just trying to solve an irritating problem ;)

• After backup of Windows 7 Action Center indicates error 0 x 80070002

  I use Windows 7 Home premium version.

  When the scheduled backup is complete, the Action Center say that some cells have been ignored, and the path is "Backup has encountered a problem during backup of the C:\Windows\System32\config\systemprofile\Podcasts file. Error: (the system cannot find the specified file. (0 x 80070002)) ».

  How can I make sure that I don't GE this message

  Error message when you try to restore from a backup complete a Windows Vista-based computer: "the system cannot find the specified file. (0 x 80070002) »
  http://support.Microsoft.com/kb/951002/en-us

  0x8100002F error code and or error code 0 x 80070002 when you back up files in Windows 7
  http://support.Microsoft.com/kb/979281/en-us Note: for senario #2 you must set Windows Explorer Tools/View tab:

  (1) show hidden files, folders or drives
  (2) remove the checkbox «Hide empty drives...» «, «Hide extentions...» "and"Hide protected operating system..." ».
  3) click on "Apply to folders", then click "OK" to exit.
  Normally the 'Contacts' and 'Research' folders are created during the installation process of Windows before setting the time zone option. The "AppData" folder is re-created when the Windows Vista to Windows 7 upgrade process.

  Also: Win7 Backup - error. (0 x 80070002) - cannot find the file specified.
  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/thread/bff71aac-c78e-42bd-A959-116019c93478

  J W Stuart: http://www.pagestart.com

• Action Center keeps telling me that Bullguard firewall or antivirus AI swiched off the power.

  Action Center keeps telling me that Bullguard firewall or antivirus AI swiched off the power. I check bullguard and everything is ok. What is going on?

  Dear rt00

  Please note that when you start your computer, it loads first your operating system (Windows), then other applications that are set to run at startup. Depending on the amount of RAM that your machine and also on the number of programs that need to be loaded, this process can take a long time to complete.

  Because at the start of Windows Security Center modules of BullGuard are still waiting for Windows to load them (through the svchost process), it signals that you are not protected. This warning should fade after a few minutes.
  If this isn't the case, I recommend that you contact us at http://www.BullGuard.com .
  Best regards
  BullGuard support team