Action Center reports an error that reads "reconnect your drive, it is important."

Similar Questions

• WINDOWS 8 Action Center reports off firewall/anti-virus/antispyware, McAfee says that all are turned on and running. Can not get the corrected message.

  WINDOWS 8 Action Center reports off firewall/anti-virus/antispyware, McAfee says that all are turned on and running.  I tried to turn it on through the Action Center, but nothing happens.

  Thanks for the reply.  I appreciated the recommendation run malwarebytes because it gave me peace of mind knowing that he found nothing.  The error of origin correct auto in the last two days seemed so it was an update from Microsoft or a McAfee update that has straightened things.  Thank you once again.

• Action Center reported that Antivirus program or firewall Windows are disabled

  Original title: Windows & Errror Action Center

  I have a computer with an operating system Windows 7 dIesk. Recentlye Action Center reports that my anti-virus, maleware, and fire wall program are turned off. I tried to turn it on using the link in the application of Action Center without effect. The programs themselves show that they are in operation. Can anyone offer advice?

  Hello

  According to the description, I understand that Action Center keeps reporting that your antivirus program is disabled, even if it is still ongoing.

  This problem may occur when the updates of anti-virus definition is not properly installed or some security services does not work properly.

  Install the Windows updates pending on the pc to check if that helps.  Updates are additions to software that can help to prevent or fix problems, enhance the operation of your computer, or improve your computing experience.

  Please follow the steps below to check if his help.

  Method 1:

  Check if the installed anti-virus virus definition is updated.

  Method 2:

  Turn on Windows defender and firewall. Steps to follow

  1. Click Start
  2. Type in Windows Defender
  3. Click on tools
  4. Select Options
  5. Select administrator
  6. Select the option use this program
  7. Click Save

  Link for reference: http://windows.microsoft.com/en-US/windows7/Turn-Windows-Defender-on-or-off

  Method 3:

  Make sure these services are set to automatic

  1. Windows Security Center
  2. Windows Management Instrumentation
  3. SBSD Security Center Service

  Steps to follow

  1. Click Start and type services.msc in the search box
  2. Search for services
  3. Right-click on the service
  4. If the service is stopped and then starts the service
  5. To start the service, click and select Properties
  6. In startup type, select automatic

  Method 4:

  If the antivirus is updated, then you can disable the message related to virus protection.

  1. Open the Action Center
  2. Under Virus Protection select Disable messages on virus Protection.

  Hope this information is useful, if the problem persists please write us back with the quick information so that we can help you further.

• Windows 7 Action Center reports that Kaspersky Internet Security is turned off

  Original title: Windows does not Kaspersky

  I have installed Kaspersky Internet Security 2011 but "Action Center" is not recognize that Kaspersky doesn't work. Action Center reports that it is turned off but Kaspersky istelf don't complain of nothing and is turned on.

  What can I do?

  A reinstall of the KIS solves the problem

• Action Center keeps telling me that Bullguard firewall or antivirus AI swiched off the power.

  Action Center keeps telling me that Bullguard firewall or antivirus AI swiched off the power. I check bullguard and everything is ok. What is going on?

  Dear rt00

  Please note that when you start your computer, it loads first your operating system (Windows), then other applications that are set to run at startup. Depending on the amount of RAM that your machine and also on the number of programs that need to be loaded, this process can take a long time to complete.

  Because at the start of Windows Security Center modules of BullGuard are still waiting for Windows to load them (through the svchost process), it signals that you are not protected. This warning should fade after a few minutes.
  If this isn't the case, I recommend that you contact us at http://www.BullGuard.com .
  Best regards
  BullGuard support team

• Whenever I open my file of muse, I get an error that reads "to EndUserAction an object (ImageFrame U20925) is not an owner? It keep crashing. Help!

  Whenever I open my file of muse, I get an error that reads "to EndUserAction an object (ImageFrame U20925) is not an owner? It keep crashing. Help!

  Received file. Thank you.

  The file alone is not enough to reproduce the error. If you choose 'Cancel' when the update links dialog box appears, the crash continue to experience? If this isn't the case, please discovers the active panel and look for the outdated links. (Click on the alert triangle icon in the column header to sort the active panel by State link.)

  Please send me the files for all the broken links so I can try to reproduce and isolate the cause of this error (both to fix it for a future release and to find a reliable solution for you). Thank you.

  P.S., The development team (including myself) is officially on leave until the 5th. So the response times are slower than usual, but I'll take a look at this once I have the files of components.

• How resolve the error that reads "wmvcore2.dll's not found" after the installation of Cool Edit Pro 2.0?

  Hello

  I recently tried to install Cool Edit Pro 2.0 on my Dell laptop. After that it's over, I went to open the application, but the error which read "wmvcore2.dll is not found" message popped up. He suggested I have reinstall the application, so I did, but nothing helped.

  I wonder what I can do to solve this problem and can you give me any help will be greatly appreciated.

  Thank you.

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  If this is not Vista compatible, read the info on the link above.
  It works for some programs, but not all.

  This applies to software programs, NOT hardware drivers.

  If it's Vista compatible > uninstall it > Re-download/save to your desktop > right click on the setup.exe > run as admin.

  If the above does not help, try to repost in Forum Vista programs:

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/threads

  See you soon.

  Mick Murphy - Microsoft partner

• Action Center keeps pointing out that my anti-virus is disabled, even if it is still ongoing.

  I ran avast! but, mainly due to this error report, I bought 'Spyware Doctor with Antivirus 2010' from pctools but, unfortunately, it does the same thing.

  Any help to fix this would be greatly appreciated.

  Hi snellij

  Welcome to the Microsoft Answers Forum!

  I recommend the methods are:

  Method 1:

  Check if the installed anti-virus virus definition is updated.

  Method 2:

  Turn on Windows defender and firewall. Steps to follow

  i. Click Start

  II. Type in Windows Defender

  III. click Tools

  IV. Select Options

  v. Select administrator

  VI. Select Use this program

  VII. click Save

  Link for reference: http://windows.microsoft.com/en-US/windows7/Turn-Windows-Defender-on-or-off

  Method 3:

  Make sure these services are set to automatic

  1. Windows Security Center

  2. Windows Management Instrumentation

  3 SBSD Security Center Service

  Steps to follow

  i. click on start and type services.msc in the search box

  II. research services

  III. right-click on the service

  IV. If the service is stopped and then starts the service

  v to start the service, click and select Properties

  VI. and in startup type, select automatic

  Method 4:

  If the antivirus is updated, then you can disable the message related to virus protection.

  i. open the Action Center

  II. in respect of the antivirus Protection select Disable messages on virus Protection

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Repeat freezing and Action Center "video hardware error error issues."

  I am not very computer savvy, but I had this problem and will provide what I can.  Since 7 September, I've been having repeated, very random questions from my computer to freeze.  I have to force close down to reboot.  It happens the same way every time, where sound begins to hum and the slider's been hanging around, and it freezes completely.  What happened 9 times the date, the last being only 30 minutes ago.  I tried to update everything possible I can drivers for windows updated.  I play every day an MMO and tried swapping game pads in case it could have been the cause, but it has not fixed.  I have been able to reduce it to scroll to the bottom of Web pages that are strong images and it begins to freeze, and I am currently using Firefox.  I couldn't find anything in case the system log of the observer who matched each gel, except once with that I think that the Action Center was looking for a problem and he came:

  Problem: Video hardware error

  Files helping to describe the problem:

  SysData.XML WD-20141002 - 1521.dmp

  WERInternalMetadata.xml

  I've done checks of viruses, malware, RAM test, even taken in a computer store to identify the problem and everything came back with no results.  I'm at a loss where to go next, or what to try.

  My profile: http://i.imgur.com/H2PaXGo.png

  I currently have two monitors, ASUS, but these if overwrite problems began before I had two monitors so I ruled that out.

  Edit: Nothing else seems to be wrong, it restarts normally and worked quite well other than the gel.

  Update the drivers for the chipset of your motherboard site and get the latest drivers for your graphics machine

  Do NOT use windows update to recommended, which includes drivers

  If the problem repeats itself then clean boot PC & retest

  https://support.Microsoft.com/kb/929135?WA=wsignin1.0

• Message "Reconnect your drive", but I have no other player... ?

  I received a message telling me that I need to "Reconnect you drive" but I never disconnect a drive from my laptop that I do not have another drive!

  It is said that my files will be "temporarily copied to my hard drive" - but my hard disk is the disk I only!

  What should I do? My computer is very confused about something or is it me? If someone can explain to me what it is because I do not understand

  It is normal to turn it off.  If you type 'file history' to your start screen, one of the results of the research will be the file history settings and you can just pick which then make the switch.

• Satellite L850-1LK - message - reconnect your drive

  Help!

  I get this message: -.

  Reconnect your player - you, the files will be copied temporarily on your hard drive until you reconnect your historical record of the files and launch a return to the top.

  I have a Satellite L850-1LK

  It is more a problem of Microsoft.
  Take a look at the Microsoft Answers site
  https://www.google.com/search?q=Reco...+run+a+back+up.

• I am running Windows Vista with IE9. When I connect to windows live hotmail, I get an error that says "upgrade your browser" message while I'm in IE9. How to solve this problem?

  When I connect to windows live mail when this error occurs, the images are irrelevant (ads, page scroll bar, unable to move emails in a folder).  I can open emails, but enamel is images are irrelevant and are not visible.  All solutions?

  Hello

  The question you have posted is related to Windows Live and will be well suited in the Windows Live Forum. Click on the link below.

  Windows Live Solution Center
  http://www.windowslivehelp.com/product.aspx?ProductID=1

• When I try to reinstall Windows I get an error that I need a driver for continue instalation.

  I want new installation vista spk 1 on toshiba satellite A100

  I inserted the cd/dvd to install vista, I am asked to load the driver that is compatible with this material, so I can install OS, I have to manually download drivers.what is the name of this driver and where do you find them, help would be appreciated, thanks

  Hello

  I suggest you to contact the manufacturer of the computer for a recovery disc. The recovery disk contains the drivers for the device appropriate for your computer.

• Cannot open the message of solution in the Action Center in windows 7

  I got the solution in the windows 7 Action Center, but I can't open it. I don't know that my internet connection is good. How can I get the message of solution? Thank you.

  Same here, but I can have a work around.  Had a Windows 7 BSOD twice in a week.  Both times the Windows Action Center reported that he had a solution, but when I clicked on the link to view the solution, the Details of the Message screen says he was unable to download the solution and told me to check my Internet connection.  Clearly not the problem.  I clicked on the link "see all the problems that this applies".  Check-video equipment 2 errors and the other "stop unexpectedly" (BSOD).  Workaround: in an event random dumb luck, I clicked on the back arrow at the top of the Action Center to return to the display of the details of the Message, and as if by magic, instead of the same message on checking my Internet connection, it displays the solution!  Now, don't get excited too - the proposed '' solution '' is not really a solution for the BSOD or apparent problem with the NVIDIA graphics card.  Here you go:

  A problem with the NVIDIA graphics driver

  NVIDIA Graphics Driver has stopped working properly.

  An update of the driver, as appropriate, could prevent this problem does not happen.

  There are several ways to find and install the driver updates, but it's best to let Windows do it for you. Try the step below, which describes the process. If it does not produce a driver update that resolves the problem, try the remaining steps in the order shown.

  1. Look for the optional third-party updates

     Even if all the critical updates have been installed on your computer, the optional updates may be available for NVIDIA Graphics Driver, who have not yet installed. Here is how to use Windows Update to find and install the updates driver option:

     1. Click here to open Windows Update in Control Panel

     2. In the left pane, click check for updates to see if there are any optional updates available for your computer.

     3. If the optional updates are available, click the link to view and select the updates to install. (If you don't see this link, you may need to clickSearch online for updates from Microsoft Update).

        If no optional updates are available, go to step 2.

     4. Select the optional updates, you want to install (especially if they seem to be related graphics), clickOK, and then click install updates.

  2. Try to manually update the NVIDIA Graphics Driver

     If no optional NVIDIA Graphics Driver update was available in Windows Update, you can try the NVIDIA Graphics Driver update manually.

     Note
     It's best to let Windows automatically installs the drivers for your hardware, as described in step 1 above.

     If you decide to manually update the NVIDIA graphics driver, here's how:

     1. Click here to open the Device Manager if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

     2. In Device Manager, double-click display adapters, and then double-click the name of the NVIDIA Graphics Driver device running.

     3. Click driver , and then click set to update driver.

• When asked how you want to search for driver software, click search automatically for updated driver.

• Windows locate and install a new driver, if available.

• See the NVIDIA Corporation Web site for driver updates

  If no optional NVIDIA Graphics Driver update was available in Windows Update, go online to the following site to check for driver updates:

  Click here to go to find out if a solution or an updated version is available online on the website of NVIDIA Corporation

How to upgrade manually a pilot using a file downloaded

1. Click here to open the Device Manager

2. In Device Manager, locate the device you want to update, and then double-click the device name.

3. Click driver , and then click set to update driver.

4. Click Browse my computer for driver software.

5. Click on the Browse button and look for the folder that you saved on your desktop.

6. Select the folder that contains the driver files.

7. Click OK, and then click Next.

8. Follow the instructions to complete the driver installation.

Note
If you run the latest version of the NVIDIA graphics driver and you still experience the problem, we recommend that you contact NVIDIA Corporation or by the manufacturer for support, and additional information.

• Visit the Web site of the manufacturer of your computer for driver updates

  If NVIDIA Graphics Driver was preinstalled on your computer, check the Web site of the manufacturer of your computer for driver updates.

  How can I find the manufacturer of my computer?

  Click on the Start button , typemsinfo32 in the start search box and press ENTER. The manufacturer of your computer is listed as themanufacturer of the system in the right pane of the system information window.

  Click here to go online to see the contact information for most of the computer manufacturers

  How to upgrade manually a pilot using a file downloaded

  1. Click here to open the Device Manager

  2. In Device Manager, locate the device you want to update, and then double-click the device name.

  3. Click driver , and then click set to update driver.

  4. Click Browse my computer for driver software.

  5. Click on the Browse button and look for the folder that you saved on your desktop.

  6. Select the folder that contains the driver files.

  7. Click OK, and then click Next.

  8. Follow the instructions to complete the driver installation.

What is a driver?

A driver is software that allows your computer to communicate with hardware or devices. Without drivers, the hardware you connect to your computer (for example, a video card or a webcam) may not work properly.

• Action Center says it has detected potentially harmful software and won't show me what it is or I solve.

  Action Center says it has detected potentially harmful software and won't show me what it is or I solve Windows defender is to come clean and so security micro scan

  Original title: Action Center

  I recommend that you run Disk Cleanup or cCleaner to remove temporary files as this will reduce the time to scan security software.

  Start the computer in safe mode with network and download and install Malwarebytes (free version for individuals only), updated definitions and run in normal mode. Disable other security software while you do the analyses.
  http://www.computerhope.com/issues/chsafe.htm

  http://www.Malwarebytes.org/products/malwarebytes_free http://helpdesk.Malwarebytes.org/Entries/21892442-should-I-Scan-with-Malwarebytes-Anti-Malware-in-Safe-mode-

  Download and run SuperAntiSpyware (Free Edition)
  http://www.SUPERAntiSpyware.com/download.html