Action pack to activate new server hardware

Similar Questions

• Move Adobe Connect 7.5 to new server hardware

  What is the process to move Adobe Connect to a new server hardware. We are running Adobe Connect Pro 7.5 (7.5.1.0.100) on a Win2K3 SP2 server. We would like to fly over Connect to a new server hardware running Win2K8 R2 (64-bit). The Connect database will remain on a separate Win2K3 SP2 / Server sp4 of SQL 2005.

  Unless there's a problem, the NETBIOS name of the computer will be different. However, the IP address and domain name FULL will remain the same.

  What is the recommended procedure to achieve this?

  PS - Shortly after moving to new hardware, we are planning to upgrade to Connect 8. Is it better to upgrade first, then move to new hardware? Or vice versa?

  Hello

  moving to new hardware is basically a new installation on the new server, and then passing on the saved content, and then reconnect to the database.

  It makes no difference if you update first and then move material or play first and then upgrade. I play first and make sure Connect works very well on new hardware, and then upgrade.

  Here are some steps which should work.

  1. make sure that your new hardware, OS and SQL Server are supported

  http://help.Adobe.com/en_US/connect/8.0/installconfigure/connect_8_install.PDF

  (7.5 check the requirements here: http://www.adobe.com/products/acrobatconnectpro/systemreqs/#proserver )

  2. make a backup of your current content directory and all custom configuration files.

  (config files will be a reference to restore SSL or other changes, not just move them at once updated).

  3. make a backup of your database and make sure you know the login and the password for your SQL Server.

  4 stop the services on the old server

  5. If moving DB, attach your DB Backup to the new host SQL.
  6. install Connect on the new hardware.

  7. do not start the services again, first restore the backup content.

  8 start services, bring up the console and connect to the DB.

  9. check your settings in the console, a reboot may be necessary first.

  10. do not load the login page?

  11. follow the installation guide for step 1 for re - apply SSL config if necessary (in Connect 8 it is slightly different from that of C7)

  Change the name of windows machine, may cause some trouble, not always, but it is easier to use just the name of the new material.

  If this isn't an option, an entry in the DB conenct must be updated:

  http://kb2.Adobe.com/CPS/407/kb407446.html

  I'm pretty sure that these steps will work, but can't test this and I don't know your exact environment, so I can give no guarantee that this will work. It is always good to simply moving to a new test equipment and if things go wrong, bring back the old system of support of production and contact.

  Good luck!

  Kay

• Server 2016 for Action Pack

  I really like my Microsoft Action Pack subscription.  It allows me to familiarize yourself with the software I deploy my clients.

  One of my clients will install a new server in the fall, and I intend to load it again Windows Server 2016 (probably Essentials).  So I went on the site of Microsoft Action Pack to load the software on one of my servers, so that I could familiarize myself with the installation and use, before the purchase of my client.

  Unfortunately, there is no download for server 2016... only Server 2012.  I was just wondering if anyone knows if server 2016 will be added to downloads MAPS.  I'm pretty well versed with Server 2012... should I stay with this version for my client?

  I would like any ideas or suggestions.

  Thank you

  Phil

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  TechNet forums:

  https://social.technet.Microsoft.com/forums/en-us/home

  MSDN forums:

  https://social.msdn.Microsoft.com/forums/en-us/home

  See you soon.

• Installation problems using the .img download Microsoft Action Pack on DVD for Windows 2012 Server Standard x 64

  I tried to install Windows Server Standard edition 2012 x 64 who got burned on the delivery of download Microsoft Action Pack DVD.  Download of the ISO image is a file .img, site Web de Microsoft Action Pack.  I have downloaded several times and burned each image on a DVD.

  When I try to install Windows Server 2012, after that select install, I get a pop-up message indicating, "a media computer driver needs is missing."  It could be a driver DVD, USB or HDD.  If you have a CD, DVD or USB flash drive with the driver on this subject, please insert it now. »

  However, I don't know which driver it needs.  During my tests I initially wanted to install Windows Server 2012 on our VMware ESXi v5.1 environment, but got this error.  I then tried to install it on a physical server that I am able to install Windows Server 2008 x 64 and Windows 8 Pro on without no additional driver needed.  The system's hard drive is a standard IDE 120 GB drive and the DVD drive is an IDE drive as well.

  I called Microsoft Action Pack support and they wanted me to pay for support to get this resolved, which I do not think that I would have to evaluate the software at this point.  They guarantee me that the download available for Action Pack Subscription holders is the necessary "correct".img file.

  I also downloaded the eval FREE for Windows Server 2012 version, but not what I need for my tests.  This download version is a .iso file real vs file .img but won't install Windows Server 2012 Standard Evaluation (Server Core Installation), (with a GUI server) or data center evaluation edition.  This version will install, but isn't what I need and is very limited in functionality.

  Someone else has had problems like this with the Microsoft Action Pack Windows Server 2012 Standard multimedia software installation process and found a solution to this?

  THX.

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Can we add this type on the Windows Server that comes with the Microsoft Action Pack subscription?

  Can we add this type on the Windows Server that comes with the Microsoft Action Pack subscription?

  Hello

  The question you have posted is related to professional level support. Please visit the link below to find a community that will offer in support of your request:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer

• My account is migrated to a new server, so I had to recreate the same account in Thunderbird, but I can not delete the old one - they appear together now.

  My account is migrated to a new server, so I had to recreate the same account in Thunderbird, but I can not delete the old one - they appear together now.

  If there is no email from the old account that you want to keep, move them in local directories first.
  Tools > accounts settings
  OR
  Right click on the email account in the fodler pane, and then select "settings".

  Select the account you want to delete.
  Click on "Actions account."
  Select 'delete account '.
  Click OK

  See the image as an aid:

• I can't activate the Server execution mode

  I'm 10.11.3 on a mac pro with the version of the app 5.0.15 server OS. I tried to activate the performance with the success mode. I started on the recovery partition to disable the integrity of the system, but still an error message when you try to activate performance mode in the terminal:

  RP-server: ~ Server$ serverinfo - material

  This system is currently running on the server hardware.

  RP-server: ~ Server$ serverinfo - setperfmode TRUE

  ERROR: Server execution Mode could not be changed.

  RP-server: ~ $ Server

  Any idea is appreciated

  Once you have a full backup of the system or another archiving mechanism allowing you to return to your software, try:

  sudo serverinfo - setperfmode TRUE

• Licenses to transfer to a new Server 2008 CAL (NOT from Terminal Services) of Server 2003?

  Can I transfer licenses CAL (NO Terminal Service) of the 2003 server to a new Server 2008?

  We are to modernize a client from an old Server 2003 to new hardware Server 2008.
  I was wondering if there re 50 CAL to buy for them, we bought or if we can transfer those from the old server.
  The former will be decommissioned and formatted.
  Please note that I don't want to transfer the CAL of Terminal Server service but rather access normal Server CAL

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• I have a new server and you cannot use Remote Desktop connection.

  I HAVE A NEW SERVER (HP ML110 G6) AND HAVE USED OLD HARD DISKS, BUT MY REMOTE DESKTOP CONNECTION WILL NOT ME OR OTHERS - WHAT COULD THE REASON BE?

  Hello

  I suggest you to try the steps below and check if it helps.

   The problem can also be caused by your security such as anti-virus program or a firewall of Windows /Defender that can have conflicting parameters as to not not to perform certain tasks. I suggest you temporary disable antivirus and firewall and check the result again. You must activate new security that you was disabled programs.
  Disable the antivirus software:

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  May also need to do this on other computers as well.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Hope this information is useful.

• Systems build and update utility - rejects MS Action Pack OS disc

  Implemented a T105 out of the box with the tools management systems & Documentation DVD was great until it asked me to insert the disc of the operating system. I chose Windows Server 2008 Standard x 64 earlier in the wizard and inserted a DVD of the BONES of this type since a MS Partners - Action Pack set of disks. However he was rejected repeatedly by the Systems Build and Update Utility as "invalid disc".

  Anyone have ideas why this is the case? How can I advance?

  The DVD of the BONE in question has the 32-bit and 64-bit versions of Server 2008 Standard on it - this could be the reason why somehow?

  Thanks in advance for any help / lights!

  
  

• Colfusion 11 (from 9) updated, new server, need to run as well for compliance testing

  Hello

  As I improve my two CF 9-11 and my server, from an individual hosted on premise to a cloud solution server based virtual machine.

  Current server runs CF9 in production and I can't close it until the Cloud Computing environment is fully configured and tested.

  Security audit will not be run on an edition of the trial/developer so that I need to have two server (on prem and cloud) simultaneously with a production version of the CF for a while (2 weeks for example).

  Am I allowed (license terms) to do?

  If I run the process of upgrading (from CF11 trial/dev edition) on the new server (cloud) using my CF9 series, it will deactivate the license on the other (on prem - CF 9)?

  Is there a specific action, I can have 100% that current production server (on prem CF9) will not be affected?

  
  

  No official response from Adobe is greatly appreciated, as the experience of users welcome!

  
  

  BR, thanks in advance
  

  Antoine.

  
  

  This message was edited by: Antoine BAPST - reason: seems no level of ColdFusion is capable of answering this question in general Licensing based on the question, so I moved it (back) to the section "permit".

  OK, so after this thread was moved back, I got an answer via twitter.

  Seems that I am authorized to maintain the two server during the migration period.

  Note that I'm not sure that this answer is 100% authentic but recognized Adobe by @AdobeCare so I'll take it as such.

  

• How to activate MS Server 2008 R2 Datacenter licensing?

  We have a number of new Server 2008 Standard R2 VMs in our 5 ESXi environment for which we bought 2012 Datacenter Server licenses. We have 3 guests and got the exact number of licenses, unfortunately, NONE of the keys (including the so-called 2008 R2 work to activate the virtual machines, I spun.)  Our software provider did not and sent the number of licenses in Volume MS, but all they could give me where the same keys I already had. If anyone has had this kind of situation, or have any advice for me? Thank you!!

  OK, there are several types of licenses, it is the MAK that can be used for individual activation, there's the KMS key. If you look at a KMS key you need to install the KMS sever license. You must also at least 5 servers to activate and use the KMS key.

• 9.0.2.0.8 zone v1 migrate to 11.2.0.3 new server

  Hello
  I'm going to migrate my current db 9.2.0.8 (version of zone is 1!) to a new server 11.2.0.3, so I'm wondering if I should upgrade version of my current 9iR2 to version 4 time zone! Before update
  BTW, my new server for a zone schedule v14.
  Thank you

  Hello
  Yes, you can upgrade after upgrade of database time zone
  Zone upgrade, you'll find instructions to
  Actions for the DST updates when upgrading to or the application of the 11.2.0.3 Group patches (Doc ID 1358166.1)
  Actions for the DST updates when upgrading to or the application of the 11.2.0.3 Group patches (Doc ID 1358166.1)

  Thank you
  Krishna

• Mobile to a new server vCenter ESX host

  Hello.

  For several reasons (including the old server vCenter 2003 x 86) I would like to move our ESX host to a new server vCenter (version 4.1 under Windows 2008 R2). Our ESX environment using HA/DRS and resource pools.

  Is it possible to move the hosts to the new server without VM downtime?

  I think disabling HA/DRS and then disconnect the old vCenter servers, then adding them to the new. That would be possible, or is there a better way?

  And second, that things are lost that kind of operation? Data of performance and resources with Betclic, another?

  / Christian

  Hey there,

  The procedure is very simple:

  -Disable HA host monitoring

  -Disconnect the old vCenter host

  -Remove old vCenter host

  -Add the host to the new vCenter Server

  -You will be weather you are prompted to add all of the resources of the host with Betclic under a live of... the list resources or put all your VMS in pool root of the pole. Select them grafted in... so you can keep your resource pools. You can move the autour pools in the hierarchy on the new vCenter.

  -After you have moved all of your hosts, you can activate HA host followed once again and check that the DRS has the settings you want.

  You lose well obviously all performance data, but you can bring your pools of resources for the new vCenter.

• Migrate to the new server vCenter hw

  I make plans to migrate all my my old hardware of server vCenter ESX hosts to a new (and much faster). Both vCenter servers are version 4. To delete a my old vCenter ESX host, I need to put it in maintenance mode. Maintenance mode means turn it off or by moving my VMs to other hosts.

  Is there a way to move my ESX hosts to the new server vCenter without voltage VM?

  Hi bjornl,

  If you need to keep the virtual machines running on the host computers, while removing a cluster host, data center or same vCenter, and then select the option 'Disconnect' first. The host shows as grayed out and disconnected. Once in this state you can 'remove' the host of your first vCenter.

  Create your new data center and then "Add host" Cluster in the new. Everything will be powered on your virtual machines.

  The only issues I've had with this is if the original or the new cluster using vMotion improve compatibility (EVC). This aspect must correspond to both ends. Once you do this, it works fine.

  Hope this helps,

  Dan