Activate Adobe on a will not connect to the computer with internet access

Similar Questions

• Receiver wireless XBOX 360 will not connect to the controller with Windows XP 32-bit

  I bought the receiver the other day and tried it on my computer. I installed the stuff that came on the disc, no problem. I plugged the receiver and tried to turn on the controller and it simply not picking up the controllers. I tried on all 3 of the controllers that I own, but nothing helped. I looked the problem on google and all say to install the new drivers on the "unknown device", but that doesn't seem to be the issue.   My computer doesn't pick up the 'Xbox 360 wireless receiver for Windows' device no problem. But when I try to sync the receiver with the controllers I get nothing.  He also says that I have driver 2.1.0.1349 if that helps

  Hello

  You can download Xbox 360 Controller for Windows using the following link:

  http://www.Microsoft.com/hardware/en-us/d/Xbox-360-controller-for-Windows

  If the problem persists, I suggest you to contact Xbox support for help.

  http://support.Xbox.com/en-us/contact-us

  I hope that helps!

• SK2061: The wireless keyboard will not connect when the PC is turned on.

  My problem is, when I start the PC, (HPK-15 500, 319NA), wireless (SK2061) keyboard, does not connect. I have to shut down the PC so he can connect (no restart, you must stop it).  Have had the PC for 5 months and it has been published. Not changed the battery makes no difference.

  The internet statement States I shoud push the blue button until the USB receiver flashes. This PC does not have an external USB receiver, I guess it's built in! The mouse works OK.

  Hello @JimCar82,

  I read your post on how the wireless keyboard will not connect when the computer is turned on, and I'd be happy to help you in this case!

  Re-connect your keyboard to your desktop computer wireless, I advise you to follow the steps described in this document on the keyboard and wireless mouse troubleshooting. The USB receiver should be found at the back of the tower.

  Please re-post with the results of your troubleshooting, and I look forward to your response!

  Concerning

• Lexmark printer will not connect to the router

  Original title: HELP

  I switched to Fios and now have a new modem/router and I don't know how to get my Lexmark printer to recognize. How can I solve this problem?

  Hello

  Thanks for posting the question in the Microsoft Community!

  The Lexmark printer will not connect to the router/modem.

  Because the problem is with the Lexmark printer cannot connect to the router, I suggest contact you the Lexmark support team in order to get help with this question.

  You can try to get help on the site:

  http://support.Lexmark.com/index?page=productSelection&channel=supportAndDownloads&locale=en&UserLocale=en_US

  If you need any help or if you encounter problems with Windows in the future, let us know and we would be happy to help you.

• Why Vista will not connect to the internet wherever I'm connected with my XP machine?

  Why my computer won't get online wherever I like Xp only

  Why Vista will not connect to the internet wherever I am?  I thought what to see that there is a link to a site to repair this, but when I found the site the link had disappeared.  Thank you

  Hello

  1 are you facing issue while trying to connect to public Wi - Fi hotspots or private home network?

  2 have you tried all of the suggestions of Fahimulla K?

  I suggest you to go through the steps mentioned in the link and the Coachman.

  Solve problems, find wireless networks

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  See also:

  Wireless network card: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions

• HP Deskjet 3055 A does not connect to the WIFI with security

  I'm trying to configure a Deskjet 3055 A on my DD - WRT router.  I am a highly qualified network engineer, so I don't know 100% what I'm doing.

  First, DD - WRT supports WPS connection, because these are very precarious.  This means that my only way to connect the pritner to my home network is to connect to my PC and use the Setup utility (downloaded from your page drivers) I use the 28.8 version.

  My router supports the 2.4 and 5 GHz and I know the printer is only 2.4 GHz.  I disabled completely the 5 GHz network in order to connect the printer, even though it shouldn't have any effect.

  I restarted my router and reset the printers wireless network using its integrated control panel.

  In any case, after a shameful 2 hours troubleshooting, I did discover that the printer WILL NOT CONNECT to the WIFI network if any security is applied against it.  It works 100% fine with open security however, it is totally unacceptable.

  I tried both WPA Personal and WPA2 Personal, both with the same effect.

  For reasons to try, I added also the printer to my network WIFI open and tried to manually change the setting WIFI via webinterface of printers, however, whenever I try and access the wireless configuration wizard, I simply get an error message saying "Internal system error" - eventually I managed to work around this another bug that has been there for years (see http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/Internal-System-Error-prevents-access-t...

  After installing printers web interface WIFI, the problem is always the same and it does not connect.

  HP, we were in the order of 2500 of these printers for users of our remote site.  If you don't come to the top with a quick solution/bug fixed, consider the lost business!

  Concerning

  Ian

  After playing well, I managed to find a solution for this!

  For all users who are unable to find a solution by using the other methods, here's what to do.

  Change your local network to open the safe but note your WIFI settings for your default installation.

  Connect the printer to the open network the HP software (via USB cable)

  Go to the URL of the printer, but make sure that you connect through HTTPS - if you get an internal system error, keep refreshing until it works (WHAT A JOKE!)

  Click on 'Network', then click 'Advanced' on the left.

  Enter the network settings as they need to be secured.

  Downstairs, check "in an infrastructure network, use 802. 11b / g behavior (assuming that your assisted supports g, otherwise use the b only option), then click on apply.

  Turn on your wireless security, on your router and then the printer should connect!

  I am really confused as to why this is not automatically enabled, if the printer is not working with security on a Wireless N network wireless, then have this as the default!

  HP - feel free to thank me in this post!

• Envy 15 t-j100 Select Edition: the device is not connected to the computer. Please insert the authentication device.

  Hello

  So I'm working on a LT desire that has been upgraded from Windows 8.1 to 10 recently and it is this message on the login screen "the device is not connected to the computer. Insert the authentication device. We can't identify what it means or what needs to be done to clear the screen. The user States that the fingerprints of impression of BIO sensor doesn't seem to work either. I looked in the Device Manager, and I see a Synaptics PS sensors (WBF) listed here and is properly installed. I even updated the driver of sensor ep on the support site of the desire, and we still see on the login screen.

  Y at - it no information or help to clear this message?

  We also note that the number on the keypad lock seems to be disabled during startup of windows 10 upwards. Before on windows 8.1 has been activated. Is there any setting to 10 to keep the active number lock.

  The user says if 10 can be made to work well, then we can go back to 7 or 8.

  Please notify.

  Thank you for your time.

  Seems to have been resolved in re - install the software HP Simple pass then go and reconfigure the settings. Message no longer appears on 10. User LT installed with 7 however. Best decision.

• printer wireless HP not connected to the computer

  My son tried hang our laptop wireless, with no result, since then the printer says not connected to the computer.

  Hi sharryn1940,

  In addition to Michael post, you can also find some good information at the following link:

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer-on-a-home-network

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Whenever I try to send a fax, I get error "no dial tone was detected. The telephone line is busy or not connected to the computer. »

  Whenever I try to send a fax, I get: "no dial tone was detected. The telephone line is busy or not connected to the computer. "Any ideas?

  You can't send a FAX via a connection to broadband. Fax is essentially specialized phones and requires that a service composition is used at BOTH ends.

  You can buy an analogue Fax/modem (USB types work well enough) or use a service to convert fax email...

• HP Officejet 6500 a: printer will not connect to the wireless network.

  I got this HP printer for a while and it worked fine.  Our old router is out and we had to get a new one.  Installed perfectly and printer continued to work properly.  The password for the router was ridiculous, that's why I changed it to something much more simple to remember.  Since then, my printer will not connect to wireless internet.  I have a ~ and reinstalled the printer but still have the same problem.  I thought maybe to try the former password would, but who does not work either.

  Anyone has any ideas that might help before chuck it and go and get a new one altogether?

  Thank you.

  Easy things first.  Turn off the router and the printer.  Turn on the router and wait 3 minutes.  Turn on the printer and see if it connects to your router.  Status?

  If no joy, temporarily disable all security in the router.  Now try to connect the printer to your SSID not guaranteed without password.  Status now?

  If OK, go back and add WPA2-AES with your simple password.  Status now?

• HP 7520: HP 7520 will not connect to the wireless network

  There is some additional information to

  http://forums.Xfinity.com/T5/home-networking-router-WiFi/HP-7520-will-not-connect-to-wireless-networ...

  on this issue.

  Have several APs for a single wireless network allows the printer foolish law.  (Not a Repeater, a second AP connected to the local network with the same configuration of network for security, etc.).

  I solved this problem.  In accordance with the discussion on the link, the problem is that the printer cannot connect to a wireless network if there is greater than 1 for a wireless network (SSID) name wireless access point.

  This thread has had several useful suggestions, but what finally solved the problem, it's the second point has access to a mode where I can create a 'virtual' access point and, above all, a SSID associated.

  Note that not all access points or routers support virtual APs, but this function seems to be more common over time.  Older models is not able to do that.  However, a new access point is sometimes cheaper than a new printer.

  If you do not understand the jargon in the procedure below, I recommend that you find someone who does, then they can do it for you.

  Solution:

  1. On one of the wireless access on the network, create an a new virtual AP with a slightly different name SSID (for example < name of the network - > _1), on the same VLAN (usually VLAN 1).  You may need to put the AP in "multiple AP mode" or something similar, and then restart the AP.  All other settings (DHCP, security, mixed mode b/g/n, etc.) must be the same for the new SSID.
  2. Run the printer Wireless Setup and connect it to this new SSID
  3. Confirm that the printer can be seen by other devices on the network

  Tips:

  • Check the security is the same as the original SSID, Alternatively you can create a vector of insecurity in your network.  Do not WEP-128 when the other SSID uses WPA2 AES, for example.
  • The AP I had had several resets to make it work because of the mode and parameter changes.
  • If you connect the SSID but cannot connect to or be seen by anything on your network, check the new SSID/AP is in the same VLAN as the original.
  • Because the printer is not roaming, and the speed is not a problem for me, I used the access point that could support this solution, which is deeper and slower than my primary AP.  I have not noticed any problems.

  The printer has been reliable on the wireless now on the new SSID, 48 hours.

  I have not upgraded any software on a client of the printer (PC, Mac, phones).

  I think that it is a positive confirmation that the problem is with the implementation of the printer of the stack of network and not with the driver or client software on remote devices.  The 802.11 protocols provide for a network name (SSID) wireless with several access points using different MAC addresses.  I suggest this HP look into this as a potential bug with their network printer for the 7520 protocols stack.

• My Toshiba Satellite will NOT connect to the WiFi in my house of employers, but connects everywhere else I will!

  My Toshiba Satellite WILL NOT connect to WiFi in my house of employers, but connects everywhere else I go; I have Windows XP Home Edition SP3, and there a router Linksys WRT16ON. My network card is an Atheros AR5001X + Wireless Network Adapter (and says "this device is working properly". I tried disabling, entering all information, penetrates is not in the news was unchecking the "Enable IEEE 802. 1 x authentication"(and whenever I go in there, he checked again) changed on 'Open' and 'AES' TKIP, WPA (which is) and the password is correct, restart the router, moved the laptop around (the router was in my room, now it is in the thnxt room and it Me REPEAT JUST : 'Validation of identity' and 'impossible to find a certificate to connect to the network'.) I can connect with ethernet, but not with this new situation of the House, do I have the wireless. WHAT ME MISS? I did this for weeks and even now, it says I'm connected, the signal strength is very good, often great, but Explorer cannot display this webpage. Can someone tell me what to do? Thank you!  Allie

  Your old Toshiba equipped with an adapter wireless which is likely to be used for Wireless-a, b, wireless and wireless-g (the project).   Your employer has a newer version (not the last and larger, but much more recent than your equipment) router Linksys that is capable of wireless-b, wireless-g and wireless - n.

  Your most likely problem is that your employer has set up his router to "N-only.  Wireless n uses the same radio frequency as wireless-g (this is why detect you the "excellent" signal strength), but uses a different protocol (this is why you can't connect).

  Politely ask your employer to change the mode 'network' from the back of the default router of "mixed".

  The router manual is here: http://homesupport.cisco.com/en-us/support/routers/WRT160N see p. 13 ' Basic Wireless Settings.

  Looking for a certificate message was probably bound to have the box 802.11 x checked.  This box should NOT be checked for home wireless networks.

• HP Pavilion will not connect to the network

  Recently bought a HP Pavilion laptop and have tried to connect to my wifi at home. He returns constantly with incorrect network security key even though I'm 100% sure that it is correct, because I use the same password for other devices. I had to change my password for my wifi hub and enter this new password as the network security key which fortunately worked however, this means that every device in my house had to be resumed contact with the new password. Not only was it a lot of your time, but as soon as I turned off my laptop and turn it back on again a few hours later, it would not connect to the network again and continued to say the incorrect network security key (and this time changing my password for my wifi does not work). I was unable to use my laptop now because she's not not able to connect to my network and internet and it drives me crazy so help would be very appreciated to help me solve the problem

  Hey Amylou2603,

  Thank you! Exactly what I needed.

  Can you tell me if you have tried the steps that I posted in my previous answer and the results?

  You will also want to try to update the drivers for the card wireless on the laptop. You can find the drivers here: 15-n267sa HP Pavilion PC drivers. You will find them listed under network after you choose your operating system and click Next.

  There are a number of drivers here. Make sure you only download the drivers that match your exact wireless adapter. To see which card you have:

  1. Press the Windows Key + X.
  2. Select Device Manager.
  3. Expand network adapters.

  Once you have checked the map, download the appropriate drivers and run the installer.

  Let me know if these steps resolve the problem.

• Windows 7 will not connect to the wifi network

  My Asus laptop (that I had for a year) all of a sudden, stopped to connect to the internet. The problem is not in my modem or ethernet, connection that work well for my mac. I click the network button and it says "network 4. No internet connection. My usual ssid will not be at the point in the available connections. I don't know what to do! The normal customer service does not know

  Hi AedanC,

  Thanks for posting the question on the Microsoft Community Forums.

  According to the description provided, looks like you are facing a problem when accessing wireless network.

  It would be great if you could answer this question in order to help you further.

  Have you made changes on the computer before this problem?

  See the following Microsoft article and check.

  Wi - Fi and in Windows network connection issues:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Keep us informed on the status of the issue.

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• Adobe Reader 11 will not return to the last page you read, but because of version 10

  Hello

  I just installed Adobe Reader version 11. When I start to read a pdf file, it will not start on the page where I left off last.

  I had version 10, and he would start on the page where I finally left (at the previous session).

  Is there a way to get version 11 to do what would make my version 10?

  For example, if I studied my Excel book and left to page 70, closed Adobe Reader, then recovery thereafter, Adobe Reader automatically start on page 70 (for the Excel book that I study since).

  However, now with Adobe Reader version 11, it does begin at the front of the book pdf.

  Is there a way to get version 11 to remember the page whatsoever when I close the book pdf?

  Thank you very much

  Edit > Preferences > Documents > open settings, select 'Restore last view settings... ". »