Activate Windows from existing user?

Similar Questions

• How to match existing users to LDAP? (And other questions of LDAP)

  Hello

  We received our license to upgrade to the paid version of SocialCast. We have 140 active users and they recorded manually. It would be great if I could now connect LDAP to SocialCast and found a few pages of help on how to do it. However, none of them doesn't really explain what's going to happen, so I have a few questions:

  -As I have already manually registered users while we still had no LDAP, how can I now connect LDAP without removing / overwriting the users. Users LDAP will be accompanied by email with existing users?

  -Is my correct assumption that after you enable LDAP, everyone can connect through LDAP?

  -Their password (account created manually) will change the password from LDAP? (Our password to Active Directory)

  -When a user leaves the company, and we disable AD account, will be disabled so SocialCast account?

  -When a change of user LDAP properties (for example, new phone number), will this update in SocialCast? How many times the LDAP protocol performs an update?

  Concerning

  Gabrié

  Sorry, sogolmotiey , but this is not completely accurate.

  My comments are based on the SaaS version, if you have on-prem, it may be different.

  -As I have already manually registered users while we still had no LDAP, how can I now connect LDAP without removing / overwriting the users. Users LDAP will be accompanied by email with existing users?

  As long as the used with LDAP email addresses match the emails from existing users and new accounts will not be created

  Not quite true.  Be careful when you specify employee_number and/or unique_identifier. By example, if you specify a unique_identifier in ldap.yml is not email address and run LDAP synchronization, it absolutely * will * create duplicate users, even if the emails matching.

  -Is my correct assumption that after you enable LDAP, everyone can connect through LDAP?

  All user accounts will be implemented through LDAP

  All accounts will be marked as 'provisioned from a directory' but to be clear, users do not log * through * ldap.  It is an intermittent user data synchronization.  Socialcast does not query LDAP when users connect and sync tool does not have passwords.

  -Their password (account created manually) will change the password from LDAP? (Our password to Active Directory)

  Their passwords will not change with LDAP, unless you decide to implement SSO, which is a supplement

  Fix. As in the previous question, LDAP sync copies only the basic user data and will not sync password.

  -When a user leaves the company, and we disable AD account, will be disabled so SocialCast account?

  The user will become an "alumni", which means that it will not have access to the community, but the user content will remain in the community

  It depends on.  The LDAP filter that you set up in ldap.yml must return only the users you want in Soicalcast, i.e. ensure that the filter does not return users with disabilities AD.  When the available tool runs, it will be 100% synchronization HC users with what he gets from LDAP. Thus, any user of SC who is not in LDAP results will be disabled, any new user in LDAP results will be created in SC.  To do this, * not * respond to the active/disabled state, your LDAP filter must handle this.

  -When a change of user LDAP properties (for example, new phone number), will this update in SocialCast? How many times the LDAP protocol performs an update?

  Yes - usually every 24 hours

  Once again, since Socialcast does not connect to or query LDAP directly, it is not automatic update interval.  You would update SC by running the tool available LDAP to how often you want to, for example the daily cronjob or scheduled task.

• I'll be able to install Windows 10 from scratch and use my Vista license to activate Windows 10?

  Original title: 10 free for Vista Windows?

  Hello

  I know that Windows 10 will be a free Windows 7 upgrade or 8/8.1 for the first year.  I run Vista Ultimate, and I would like to upgrade to Windows 10 as well.  I'm not interested in upgrading my Vista installation - it's almost 10 years and it's time to start over.  I'll be able to install Windows 10 from scratch and use my Vista license to activate Windows 10?  I totally understand don't want not to support an upgrade of a system of directly to 10 Microsoft Windows Vista, but Vista licenses will be able to 'upgrade' to Windows 10 licenses?  I have not found information on it online.  Everything speaks to us (ameioration) for Windows 7/8/8.1 for Windows 10.  It would be a shame for Microsoft to extend an olive branch to some legitimate users of Windows and others do not.

  Thank you

  -Paul

  There may be another way to get 10 Windows, read the following:

  Will there be an upgrade for the Technical Preview to the RTM (Release To Manufacturing)
  Read this response by Gabriel Aul:
  https://Twitter.com/GabeAul/status/540579810880147457
  And: http://windowsitpro.com/windows-10/windows-insiders-could-get-windows-10-rtm-surprise

  J W Stuart: http://www.pagestart.com

• The Windows Task Manager - showing processes from all users

  Is it possible to get the Windows Task Manager to view all default processes?

  When the system is running very slowly it's a great nuisance to have to activate the "show processes from all users' the after you have opened the TM and waste valuable time in the process identifying guilty.

  Winston

  Hello

  I don't know of a way well there could be a... Here are some tips of perfomance and tools that can
  also be used as a troubleshooting tool.

  I just realized that if UAC is disabled him show all users remains active.

  ----------------------------------------------------------------------------------

  Process Explorer can be very useful for you.

  Be careful that a lot of these programs and services really need run and often remove some fact little
  at the speed of the machine while making the less easy to use machine.

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135

  To see everything that is in charge of startup - wait a few minutes without doing anything - then right click on the task - bar
  The task manager - take a look at stored by - Services - process - it is a quick reference (if you have
  a small box in the lower-left - show for all users can check only).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG and then display a list of the people here.

  Method 1 using Windows Defender will tell you more specific information about each program.

  ---------------------------------------------

  It's a little more complicated that you might have a few running services that you can do without.

  Also some programs add services that might not really need to start automatically.

  To see these compare these in Start - type in the search box-> find Services at top right click on RUN AS ADMIN as the default Vista as shown here by BlackViper. Ignore and who are disabled (which do not run) or manual (which work only on request) - for any automatic or automatic delayed start you can post them here if you need help to decide if you should run. Some of these can be assigned to the stop and
  Manual if the program calling can run them as needed.

  BlackViper made also some improvements to default windows services but I wouldn't do those unless you
  really understand the full meaning of change a default service. Then use it as a tool to compare.

  Windows Services - list by default.
  http://www.blackviper.com/WinVista/servicecfg.htm

  WhatInStartup - free - disable/enable/remove of programs at Windows startup
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  -----------------------------------------------------------

  Here are some tools that will help:

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window Watcher says it all, reporting of any window created by all running programs, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  Process Explorer - free - find out what are the files, registry keys and other objects processes have opened, the dll
  they loaded and much more. This exceptionally effective utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to startup automatically when your system boots and you
  opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
  start the settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are loaded automatically when Windows
  starts. For each request, the following information is displayed: Startup Type (registry/Startup folder).
  The command - line String, product name, file Version, company name, location in the registry or the file system,
  and much more. It allows you to easily disable or remove unwanted programs that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Whento download iTunes for separate iTunes accounts linking 10 separate Windows to make user accounts, I download iTunes from the first main administrator account, or does it download it separately in our own Windows user account

  If we want to have separate iTunes accounts running from Windows 10 separate user accounts can I download iTunes on the first main administrator account, or does download it separately in our own Windows user account

  Install it from the admin account, and then all user accounts will be able to use it.

• Whenever I try to change the settings for startup from the Control Panel, a pop up tells me that I need to activate Windows Defender and open

  I installed Microsoft Security Essentials today and I'm trying to edit startup programs. Whenever I try to change the settings for startup from the Control Panel, a pop up tells me that I need to activate Windows Defender and open.  However, most of the security will not allow Windows Defender be turned on and I want to change the startup parameters.  How can I accomplish this?

  Hello

  If you use Norton, AVG, Avira, Microsoft Security Essentials, McAfee, etc. the default action is for Windows Defender must be disabled, that these AntiVirus programs have their own Antispyware Applications.

  There is nothing to worry.

  Using both programs at the same time can cause system conflicts, etc.

  If you want to have additional protection against malware using the version FREE of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And now edit startup in Vista without using Defender programs, use one of the following methods:

  "How to use MSCONFIG in Windows Vista"

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  Or the program Autoruns for FREE:

  "V11.21 Autoruns for Windows"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  See you soon.

• Task Manager Windows 'show all processes from all users' will not work

  Hi im running service of 64 bit vista Home premium pack 2

  For some reason any button "show all processes from all users" in the Task Manager will not work, when I click nothing happens, uac prompt little or nothing.

  I can end processes very do well no problem it's just the show all button that does not work, I thought that maybe the taskmgr.exe in my right-click system32 folder and compatiability tab and running it as admin it would work, but the compatiability tab is completely grayed out all I can't click anything in it.

  Im not a big computer wiz, but I checked my user accounts account im logged on says that it is the administrator and UAC is on.

  On a side note do not know if this has nothing to do with my problem but recently my computer has got contracted a Trojan horse that has infected the mrt.exe file, I had to delete, now I get an error during windows startup associated with mrt.exe works not properly. any suggestions how to solve this problem too

  Hello

  Make sure that the malware is removed completely

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  _____________________________________________________________________

  also run the sfc/scannow command.

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

  How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista

  http://support.Microsoft.com/kb/928228#appliesTo

  If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation

  read the below tutorial on how to perform a repair installation

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

• How to open the window pop-up that requires no response from the user

  Hi - in javascript, I want to open a message window small, very similar to what you get w / an alert or confirm, but who do not require (or allow) a response from the user.
  
  It displays a message "wait...". "while a process finishes. So, I would like to raise
  the window/message box before the process starts, let the process work, then
  When it is finished, close the window by using the code - not because of user input.
  
  Is there an easier way to do this than w / window.open? I'm really not together
  new window browser... just a message.
  
  Thank you
  Carol

  Hello

  It was actually some other colors as well for titles and the community table.

  I've updated my page to use the 15 theme color palette and add a title for the popup. Of course, the normal alert/confirmation messages appear differently in different browsers, so there is no style of message that I could imitate - I just used colors and something resembling theme 15 ish

  Andy

• How do I move/transfer all files/folders etc. from one user to another-windows xp sp3

  because I couldn't get some apps to work reading under my username, I created a new user and they work, but I don't want the two users.  How can I mover everything of the old user to the new user?

  Sign in with your administrator account, go to C:\Documents and Settings and you will find all users. Copy the files/folder that you want from a user and paste to the other user. For example, you can copy files from C:\Documents and Settings\User1\Desktop and paste to C:\Documents and Settings\User2\Desktop.

• How to transfer files from one user to another in Windows Vista?

  How to transfer files from one user to another under Vista?

  How to transfer files from one user to another under Vista?

  A simple way is to move the file to the Public folder.
  Public folder is accessible by all users.

  How...
  Right click on the file > click Move To > navigate to the Public folder > click on move.

  If you do not Move To option in your right click context Menu, here is the tutorial...
  http://www.Vistax64.com/tutorials/89196-context-menu-add-copy-folder-move-folder.html

  Use an easier method.

  PS you can also use methiod drag-and-drop rather than pass to the method. I prefer the latter.

• Activate Windows 7 from Windows 7 trail

  I have Vista Home Premium Windows 7 trail. You sent me a Windows 7 Home Premium Upgrade Media with a product key. The product key does not work. What should I do to make this work?

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Unable to activate Windows XP Professional and Microsoft support says that it is because I am running SP2 and it is not supported...

  original title: activating xp

  RELOADED xp pro and got the activation of the screen where I clicked Yes to activate, but it won't all still talking to microsoft and because it of sp2 that they do not support it and told me to come here. Any ideas on what I can do next

  Try once more, if you still no help then see the info below on creating a slipstreamed XP CD that incorporates the SP3)

  How to activate Windows XP (http://support.microsoft.com/kb/307890/en-us

  See the section titled: "how to activate Windows XP by phone.
  Also, make sure that you do not confuse the letters and numbers (number 8 for the)
  Letter B, etc.).

  How to contact a Microsoft Product Activation Center:
  http://support.Microsoft.com/default.aspx/KB/950929/en=us

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Users of Windows XP - Genuine Advantage Notifications:
  http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=afd45b36-3d77-4259-801c-d31a9a90cdcf
  (This tool will confirm that the copy of Windows installed on your PC is genuine and authorized)

  -------------------------------------------------------- Also -----------------------------------------

  Create a "Slipstreamed" of integrating XP SP3 version then activate XP
  AutoStreamer, it is easy to use and for the most part explicit.
  After you create the CD then do a "clean install", see the last part
  My response.

  Guide auto Streamer and Download Sites:
  http://www.simplyguides.NET/guides/using_autostreamer/using_autostreamer.shtml
  http://fileforum.betanews.com/detail/1092632287/1

  Where to download SP3
  (This file that will be used to created the slipstreamed CD)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5b33b5a8-5e76-401F-BE08-1e1555d4f3d4&displaylang=en

  Create a version Slip Stream of Windows XP with SP3
  http://www.webtree.ca/WindowsXP/slipstream.htm  (With the help of AutoStreamer)
  http://www.theeldergeek.com/slipstreamed_xpsp3_cd_final.htm
  http://www.winsupersite.com/showcase/xpsp3_slipstream.asp

  How to create a Windows XP SP3 slipstreamed CD
  http://www.PAGESTART.com/slipstreamsp3.html

  You create the slipstreamed CD will not include specific drivers
  for your motherboard, video, audio, network, etc...  Those who you will be
  need to download to your PC or motherboard manufacturing
  Web site.

  How to do a clean install of Windows XP
  Start by changing the BIOS setting to start from the CD drive first.
  Then see below:

  Michael Steven: http://www.michaelstevenstech.com/cleanxpinstall.html
  more information: http://windowsxp.mvps.org/XPClean.htm
  and: http://www.theeldergeek.com/clean_installation_of_windows_xp.htm

  How to optimize your chances of Windows XP SP3 Setup successfully:
  http://www.PAGESTART.com/windowsxpsp3p3pg8.html

  J W Stuart: http://www.pagestart.com

• We have made no changes to our computer that runs windows XP suddenly when we start it says that we have 3 days to activate windows again.

  We have made no changes to our computer that runs windows XP suddenly when we start it says we have 3 days to re-activate windows because of major changes to the system.  We have not changed.  What's the deal, our copy is valid and has been for years.

  How our copy of windows valid suddenly become invalid?
  Is it possible that some programs of virus/spy stole our code systems disconnected from our system to make our windows inactivated?  I didn't know how it would be possible, just try to guess.  What should we do? reactivate? Call and have our system enabled somehow?

  Could be a Windows update that caused the problem, try to activate the phone.

  How to activate Windows XP
  http://support.Microsoft.com/kb/307890/en-us

  See the section titled: "how to activate Windows XP by phone.
  Also, make sure that you do not confuse the letters and numbers (number 8 for the)
  Letter B, etc.).

  How to contact a Microsoft Product Activation Center:
  http://support.Microsoft.com/default.aspx/KB/950929/en=us

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Users of Windows XP - Genuine Advantage Notifications:
  http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=afd45b36-3d77-4259-801c-d31a9a90cdcf
  (This tool will confirm that the copy of Windows installed on your PC is genuine and authorized)

  J W Stuart: Http://www.pagestart.com

• Unable to activate Windows XP Home Edition after the repair facility.

  Of that, I was running a Dell Dimension 5000 bought from the Dell website in 2005. After this computer from run very slowly, I decided on an upgrade. So I removed the hard drive of this computer with XP Home Installation and everything what it intact and plugged the hard drive into a completely new computer (that I bought and customized piece by piece). I also installed Windows XP Pro using the ability of XP to run dualboot. Now the Pro works well, but has of course none of the programs of the host OS installed as even if Pro and Home are installed on the same drive C, Pro of course did not the registry of home settings. That's fine, but when I chose the House to the splash screen immediately after my computer upward once again, I have encountered an error saying that Windows has shut down the computer to prevent damage etc. by a blue screen of death. So I fixed installed House, by inserting the Home CD in the CD drive (which is also new and I bought, not even the one from my old computer to 2005), choice of APPETIZER and not the repair console and then clicking R to repair the detected existing OS. I fixed installed and I was thrilled when the problem has been resolved. When I chose the House and after having set up, I was greeted by the familiar screen with users that I had set up on my PC of 2005. When I clicked the user admin, typed the password, he accepted the password and then a box came up saying I had to activate Windows before I could open a session. By clicking on the number resulted in the user disconnects automatically before the start menu or desktop appeared. Clicking Yes led me to a screen that gives me the choice to choose between online and phone activation. As my entire computer (except for the hard drive) is new, the internet network adapter is also new, and that's why the internet settings (the 2005 model old) which I had not yet changed on the Pro Installation do not allow me to activate via the net. I tried via telephone following all the instructions and punch in the 25 digit code generated by the wizard in the phone and told me that the operator could not generate a code (for me 2 type in the boxes provided and therefore use to activate XP Home). I then shut down the PC, went to the installation of Pro, changed the IP settings according to the instructions given to me by the ISP to the phone and checked the net now works on installation of Pro IE. It worked, and I now turned off, chose the House and tried to activate on the net and there is not yet well make sure that my computer is connected to the net. I even clicked on the phone option and changed my ID by typing my OEM 25 product key numbers and clicking Refresh. I tried again by phone and still could not activate my installation in a House. The installation CD home I used was the 2 me by my Builder (a purple disk saying OPERATING SYSTEM: ALREADY INSTALLED on YOUR COMPUTER). This CD certainly isn't a forgery because I ordered directly from DELL and not even the 2005 Bill to prove it. Is it because I changed my system components and not my hard drive with it, which is the origin of this problem? How can I fix this without backup everything and remove the installation of the House and then re - install?

  "ArjunC" wrote in message News: 3df4138b-2174-4cb1-821e-0527dc60da2c...

  In fact the Windows XP Pro has been installed by the people who moved the hard drive to the new computer. I never asked for it. But remove XP Pro still wouldn't solve my problem. I need to find a way to use my original of 25 characters product key or get a key of success generated by phone so that I can log on to Windows XP Home Edition and continue to use my PC as how I used my old. Some people have told me that I can convince to install MS by phone that I transferred the disk hard - 2 a new computer and then tried a repair but the problem is that all the numbers given on Activation Wizard phone are automated, giving instructions, asking the ID generated by the wizard and then telling me that they are unable to generate an ID for activation. If there is human here, how do you convince a machine of my innocence :)

  You need to reinstall using an XP Home OEM disk - see if one of your friends has one you can borrow. The key on your COA sticker will be valid for this.
  You can also contact Dell and ask them to provide a set of disks in your machine - for a price.
  
  --

  Noel Paton | Nil Carborundum Illegitemi | CrashFixPC | The lazy three fingers

• What to do when it says activate windows now... when I put my hardrive in a different model and when I put the key to product said in wrong product key... what should I do?

  When I changed my hardrive to a comp. different... I get a message to activate windows now, problem is when I do it says invalid... do I have to buy a new product key?

  Hello

  1. what operating system is installed on the computer?
  2. What is the accurate and complete error message you get when you try to activate?

  After major hardware change guests for activation of Windows I suggest you try the steps from the following link:

  'Stop the 0x8007232b error code' or 'Stop the error 0x8007007B' when you try to activate Windows
  http://support.Microsoft.com/kb/929826

  Additional information:
  How to contact a Microsoft Product Activation Center by phone
  http://support.Microsoft.com/kb/950929/en-us
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  http://Windows.Microsoft.com/en-us/Windows7/activate-Windows-7-on-this-computer