Activation after the replacement of material!

Similar Questions

• Windows 7 is not activated after the replacement of the motherboard

  Hello

  I got my V570 motherboatd & cpu replaced after the masssive failure (as seen here several times in the forum) and now my win 7 is not activated... What can I do with it? I have 2 days more before it runs

  Thank you

  
  

• XP Media Activation after the replacement of the mother/CPU card

  We recently had a wave of power cuts, the end result being that my motherboard got fried.  Today, I replaced the motherboard, processor and memory on the PC, but after turning on the PC, I now get a message saying that I need to activate Windows.

  I phoned the number of the support provided for the United Kingdom and automated processes, but eventually to be told that it is not possible to activate the copy of Windows.
  Is there a number I can call and talk to someone to get this version of active Windows or I'll be forced to install a new version of Windows?  If this last, will be the files and applications already installed would be in danger?  Ideally, I don't want to upgrade to Windows 7 because there are a number of programs that I use and which are not compatible.
  Any help will be most appreciated.
  Thank you
  Jonathan
  Insert your Windows CD into the CD-ROM or DVD-ROM drive and boot the computer from the CD.
  Do one of the following:
  1. When you are prompted to install Windows now, press ENTER, press ENTER.
  Setup search all previous installations of Windows XP on the hard disk and then displays a list of all previous installations that it finds.
  2. use the arrow keys to select the installation that you want to repair, and then press R to repair the selected Windows installation, press R option.
  This will start the repair of your previous Windows XP installation.
  Setup installs the HAL, the IDE controller drivers and other drivers who must have the new motherboard.
  Once the repair is completed, reinstall any service packs or hotfixes that you had previously installed.

• Cannot access drive after the replacement of material

  I had some hardware problems with my computer recently.  I don't know who that resulted, but the card mother SATA controller and boot hard drive were damaged and had to be replaced.  I replaced the motherboard with the same exact model and the boot disk with a large (300 GB) version of the same model.  All data stored on a RAID1 different set (Mirrored) which does not seem to have been damaged.  The RAID1 set had permissions to full access from the account administrator «MainUser»  There was also an active guest account who did not have access to this drive.

  After replacing the drive start-up and the motherboard, I restalled Windows XP 32 bit operating system using the same CD of installation, login names and password that were used previously.  However, I can't access the data reader.

  I can see the drive in Windows Explorer.  I was able to change the drive letter to the old letter.  When I try to rename the drive I get the message Invalid Volume Label "You do not have sufficient rights to perform this operation."  When I try to explore the disc I get the message post work "R:\ is not accessible.  Access is denied. »

  Motherboard: Asus M2N - SLI Deluxe
  C:\ Boot disk: WD Raptor 300 GB
  R:\ Data drive: RAID1 (mirror) WD 750 GB

  How can I have access to the whole drive RAID1?

  You will have to take possession of it . Or download the file here .

• How can one XP PRO/HOME ED be saved to work with older hardware for restoration after the replacements of material

  OLD Machine equals zero reactivation OEM support. How can I save four other machines to stop the death of my portfolio. Back up the hard drive just ISO or other wizardry doesnot work.

  It is not possible.

  You are usually "" the operating system for the same pc, backup data will not

  working with 'new hardware pc' or main pc components. In addition, a pc that is redesigned

  with 'a few new pieces' xp will require a re-registration for the OS...

• Windows 7 Home Basic will be activated not after the replacement of the motherboard has failed

  Hello

  My cousin has a copy available from Win7 Home Basic SP1 64-bit, which is an OEM pack and geographically limited in India.
  Recently, the desktop motherboard has developed a fault and it was replaced by the seller that it was under warranty (so assuming that to be the same brand and model of origin).
  After the replacement, he receives a prompt from time to time that the version of Windows is not genuine and a new product key must be purchased which means buying a new copy of Windows altogether.
  I tried to help him with his number and did some research on the microsoft Web site. I tried reactivate using the same product key, but get the message that the hardware has changed and the same key cannot be used. I also tried to use the phone activation method - but after entering all numbers of 9 series a message is read on that there is a technical error and the appeal is terminated. (But he does not say why the version of Windows cannot be enabled)
  I came across the following post which seems to suggest that the same product key can be used as long the motherboard is replaced for a foul and the brand and the model have not changed.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/after-replacing-my-failed-motherboard-Windows-7/b547458e-a1ae-45df-AE4C-e4d191fc8e6a
  I would like to know if there is a way to validate the Windows version now. We are concerned that both the computer and the BONES are authentic copies and licensed and it is not just that we need to get a new product key. I would like to know if there is a phone number or address of Microsoft office in India or abroad with which we can express our concerns.
  Thank you

  How to activate Windows 7 manually (activate by phone)

  1) click Start and in the search for box type: slui.exe 4

  (2) press the ENTER"" key.

  (3) select your "country" in the list.

  (4) choose the option "activate phone".

  5) stay on the phone (do not meet all the automatic guests) and wait for a person to help you with the activation.

  (6) explain your problem clearly to the support person.

• Windows Vista after the replacement of the motherboard

  I replaced a faulty motherboard on my windows vista machine, now it tells me my copy of windows is not genuine, how can I fix this?  Original was an AMD Phenom processor, replace it with a processor Intel i3 and Council.  Once the physical exchange of has been done, he pulled upward and ran with no problems until now, about 3 weeks after the change of material.

  If the copy of Vista came with your computer (in other words, it was a copy sold OEM preinstalled on your computer) you are virtually no chance that the OEM copies are linked to the motherboard and if he dies, the copy of Windows is no longer valid.  Otherwise, you must follow the instructions for activation by telephone and explain the exchange of material and you will be assisted with the reactivation of your copy of Windows.

  "twolfert" wrote in the new message: * e-mail address is removed from the privacy... *

  I replaced a faulty motherboard on my windows vista machine, now it tells me my copy of windows is not genuine, how can I fix this? Original was an AMD Phenom processor, replace it with a processor Intel i3 and Council.  Once the physical exchange of has been done, he pulled upward and ran with no problems until now, about 3 weeks after the change of material.

• After the replacement of my iPhone screen 6, front facing camera does not work.

  After the replacement of my iPhone screen 6, front facing camera does not work. The rear camera works fine, but when I switch to selfie cam I saw a still image of what was on the camera back; and on snapchat it simply refuses to move to selfie cam. I check to make sure that all connectors are deep-set. Any suggestions?

  If someone else that Apple will replace your screen they screwed up. If Apple has replaced your take screen back to the store.

• I have Windows vista Ultimate edition. but he started asking for activation after the windows update while it has already been activated before the update.

  I have Windows vista Ultimate edition. but he started asking for activation after the windows update while it has already been activated before the update.

  Hello, Pichon,

  If Windows Vista application unexpected activation

  On rare occasions, you may be prompted to activate Windows Vista on a computer that did not previously require Windows Vista activation or has already been activated successfully. For example, this may occur on a computer on which Windows Vista was preinstalled by an OEM installation or Volume licensing and are major hardware changes occurred, such as upgrading the hard disk and memory at the same time.

  If you are prompted to reactivate Windows Vista, you can do this by using the Windows Activation Wizard to:

  1. Click Start, and then click computer.
  2. Click System Properties on the toolbar, and then click click here to activate Windows now in the Windows activation area. If you are prompted for an administrator password or a confirmation, type the password, or click continue.
  3. Select the Windows Vista activation method that you want, and then follow the instructions.

  To avoid this problem in the future, obtain the latest service pack for your version of Windows Vista, either through automatic updates or direct download.

  To update to Windows Vista and prevent this activation problem does not happen:

  1. Click Start, click all programs, and then click Windows Update.
  2. Click find updates.
  3. As soon as Windows Vista found the updates, click the install updates button.

  How to activate Windows Vista

  http://support.Microsoft.com/kb/940315

  Activation fails when you try to activate Windows Vista, Windows 7, Windows Server 2008 or Windows Server 2008 R2 on the Internet

  http://support.Microsoft.com/kb/921471

• BitLocker - encrypt - decrypt cycle after the replacement of the motherboard?

  After replacing the motherboard of your laptop with BitLocker encryption, the system requires a recovery key. Once inside, connect us to the system as long as decrypt it administrator local to turn off BitLocker and, once finished, activate BitLocker.

  This whole process of disabling and enabling BitLocker may take up to an hour to complete, during which the laptop can not be used by the user.

  Is it there anyway that we can re - initialize BitLocker, after a motherboard replacement, without all the decrypt / encrypt process?
  While the time that the system cannot be used is reduced to just a few minutes?

  Hi Dennis,

  Thanks for posting your query in Microsoft Community.

  I am afraid that you cannot re - initialize the BitLocker after the replacement of the motherboard as the TPM secure is removed or changed. A TPM Module (TPM) is a chip that is integrated into a computer. It is used to store cryptographic information, such as encryption keys. Information stored on the TPM chip may be more secure from external software attacks and physical theft. BitLocker uses the TPM module to help protect the Windows operating system and user data and to ensure that a computer is not tampered with, even if it is left unattended, lost or stolen.

  If your new motherboard does not have the required by the BitLocker TPM, you can refer to the section can I use BitLocker on an operating system without a TPM Reader? in the following article and follow the steps.

  BitLocker frequently asked Questions (FAQ) 

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Windows Activation failed after the replacement CMOS battery

  I upgraded my computer (HP Pavilion m7570n) from Windows XP to Windows 7 Pro (64), with the exception of a few problems earlier with the installation of MSE, it works well and much faster than Windows XP, has never had a problem starting up.

  Since the machine is approximately 8 years and the CMOS battery has never been replaced, I thought that it might be justified to replace. I did, quickly to avoid the CMOS to discharge. But now, whenever I start my computer, I get a message that my Windows 7 Pro is not a genuine copy and it requires a new activation process, which when I try it doesn't work. I entered the real code in the package of Windows 7 Edition Home Premium, the same code that I used to own initial installation, I did the upgrade.

  Everything seems to work fine, except the notification of activation and the non-genuine warning.

  Any idea on how to get this problem resolved?

  Any help will be appreciated

  Try the phone activation:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Vista wants to be activated after Lenovo replaced my motherboard laptop. It says the product key already in use.

  • As stated in my question.

  You can reactivate your Windows Vista installation by doing the following:

  1. click on the Start button and in the box, type search: slui.exe 4

  2. press the Enter key on your keyboard.

  3 select your country.

  4 follow the instructions for the activation of the telephone (toll-free).

  NOTE: When you call this number, you will first hear an automated voice. If the automated voice gives you an option to speak to a representative of Activation Live, select this option. If this is not the case, do not enter all the numbers. This should force the voice automated transfer you to an Activation Rep. Live trying to activate through the automated voice will not work, in your case, your activation will be successful only through the Live Activation Rep.

  Carey Frisch

• First Pro CS5.5.2 will not install after the replacement of the motherboard?

  First Pro CS5.5.2 will not install after replacing mothboard. It was running properly for 4 weeks before changing due to problems connecting AC and wireless connectivity.

  Adobe, case No. 183519673, Adobe engineers (Asia/Pacific) have worked on this issue for more than 3 hours with no result after uninstalling and reinstalling.

  Ideas for resolving the issue wou; LD appreciated.

  Also available at the section of material http://forums.adobe.com/message/4634472

  There is a new forum for download & install and installation issues

  http://forums.Adobe.com/community/download_install_setup

  Or, call Adobe

  In the United States - Adobe install problems 800-642-3623

  In the United States - Adobe Activation 866-772-3623 Open 24/7

  I offered to provide information of make and model of motherboard

  [Additional information about else added]

• HP envy 17 can not boot windows or using recovery DVDs after the replacement of the motherboard

  Hi all, I need your help

  first of all sorry for my English but I'm from Greece. I really don't know a lot about the mobile only very basic computer.

  I have a hp envy 17 3d 2080en with windows 7 Home premium which, after overheating, chips to the motherboard. I ordered and installed a used motherboard from China (part 630793-001 hp number).

  After that I tried to start the laptop, but when he opens he said probably due to the change of the material he cannot start windows normally. After reading a lot on the internet, that I tried using the recovery DVDs I had prepared before the problem, but they will not start just yet. Then, I tried to use the cd system repair but again no luck.

  I looked in the bios as some people say on the internet and realized that the product number and serial number are different from those of my laptop and it's maybe part of the problem, but I don't know. I looked in other posts about similar problems, but did not get a definitive answer and this is why I post for your help.

  Thanks to you all

  Nikos

  IF YOU HAVE AN HP LAPTOP (MINE IS HP ENVY 3D 2080EN) THAT YOU HAVE CHANGED THE MOTHERBOARD WITH ANOTER ONE (MINE WAS FRIED OVERHEATING) AND AFTER REPLACING YOUR LAPTOP DOES NOT START AND YOU CAN'T FIX IT WITH SYSTEM REPAIR DISC OR DOES NOT PERFORM A CLEAN WINDOWS INSTALL OR DON'T LISTEN NOT A RECOVERY CD/DVD RECOVERY THEN EXPERTS HP WHO KNOW NOTHING. LOOK IN YOUR BIOS, AND IF YOU SEE THE PRODUCT NUMBER OR SERIAL NUMBER DIFFERENT THAN THOSE APPEARING ON YOUR COMPUTER (USUALLY IN THE BATTERY COMPARTMENT) THEN GO TO A HP SERVICE ALLOWED AND TELL THEM TO HAVE YOYR TATTOOED BIOS. WITH THE TATOO (COST US $ 40), THEY WILL REPLACE THE NUMBER OF BAD PRODUCT AND/OR THE SERIAL NUMBER WITH YOUR MOBILE PHONE NUMBERS AND YOUR PROBLEM IS SOLVED. MY MOTHERBOARD HAS BEEN FRIED TO OVERHEAT AND I BOUGHT A USED ONE FROM CHINA. AFTER I REPLACED IT THE LAPTOP WOULDN'T START AND WOULD NOT ALLOW ME TO REPAIR DVD HE OR EVEN THE USE OF RECOVERY. I CALLED HP SUPPORT, I EVEN JOINED THE HP FORUM TO ASK FOR HELP AND I GOT ONE EXPERT WAS USUALLY TRY THIS OR TRY THIS. DON'T LISTEN TO THEM. FINALLY, I READ AN ARTICLE FROM THE INTERNET THAT EXPLAINED THAT WHEN YOU CHANG THE MOTHERBOARD / SYSTEM BY ANOTHER THEN THE BIOS REFERS TO THE NEW PRODUCT NUMBER, MOTHERBOARDS AND/OR THE SERIAL NUMBER AND THIS WAY THERE IS INCOMPATIBILITY WHICH DOES NOT ALLOW WINDOWS TO START, YOU CAN NOT REPAIR WITH SYSTEM REPAIR DISC OR IT DOES NOT PERFORM A CLEAN WINDOWS INSTALLATION OR A RECOVERY CD/DVD RECOVERY. ONCE YOU TATOO THE BIOS THATS IT. THE LAPTOP WORKS. I HOPE THAT THIS MESSAGE WILL HELP SOME PEOPLE WAISTING THERE TIME AND SPEND THE MONEY FOR NOTHING

• Activation after the end of support?

  It will be possible to reactivate an installation of Windows XP after the end of the support in 2014? I intend to keep an XP system to run old programs and worry about what happens if I need to reinstall it.

  When MS XP launched in 2001, they promised that the activation would be available to certain (undefined) point in the future, date at which they would make available a patch to remove the requirement.

  I believe that to be the case.