Activation of VCA mode for cluster production

Similar Questions

• Activation error: invalid SN for this product

  I read support articles in all directions into the wee hours of the morning to try to help out myself, and I have not found any that is worked. My last computer kicked the bucket, trying to reload CS5.5 Master Collection on my new computer (Mac w / Yosemite), I am unable to get my products to launch.

  
  

  The error does not seem to indicate that it is activation too, even if I wasn't able to disable the last instance before the death of my last laptop.

  Before resurrect my series from backups, l has installed a 30 day trial. Now when I try to enter my key, it tells me the serial number is not valid for this product. Screenshot: http://tardis1.tinygrab.com/grabs/6111bb2e6d31485e251605fb9070536e31c30095e0.png

  I tried to uninstall all applications that were initially drafted by the trial, and then the fresh install from the .dmg I made the drive, which I can't find since we moved. Dmg Installer accepted my series and continued his merry way writing of new instances of the applications I've selected. When I try to start one of the applications that are newly installed; however, I invite me again for my series. I enter the same serial number that I have provided the installer, but I get the error is not valid-for-this-product.

  A help article speaks of licenses CC suggests to check the hosts file. Even if mine is different, I tried poking around in/private/etc in any case. It's just the initial comment and three lines for broadcasthost localhost and localhost respectively; There is no mention of adobe anywhere. I imagine that this does not apply to me.

  I found "Error"serial number is not valid for this product"|" Creative Suite"and checked my tongue, but I can't believe he would have been any other language when I use it with success on my last machine."

  I tried activating offline because "in Sign, activation or connection errors|" CS5.5 and later, Acrobat DC"mentioned that activation offline work for CS5 and products CS5.5 CS6, who understands me. I could not find where locate or generate ar equest code, however. Impasse here.

  
  

  Elsewhere on this page (sign activation, or connection errors |) CS5.5 and later, Acrobat DC) were, however, some tips that don't apply to me. This page lists always up-to-date information? Elements that do not have the height:

  • Check the firewall settings.

  If your computer is behind a firewall, make sure that the firewall does not block activate.adobe.com via ports 80 and 443.

  Mac OS: Applications > utilities > Adobe Application Manager > basic > PDApp

  -> I don't see MAO in my file utilities. Many other things is Adobe, but no MAO here. What is the question? Or it just moved since every time that that has been published?
  

  • Verify access to the activation servers.

  Launch an Internet, such as Firefox or Internet Explorer browser, and open one of the following links, depending on the version of Creative Suite:

  CS5.5: https://activate.Adobe.com/test

  CS6 and later: https://LM.licenses.Adobe.com/GDF/status.jsp

  -> I don't have Chrome and Safari installed, but neither one displays a success message: I get redirected to Adobe Systems Inc. - access denied and see http://tardis1.tinygrab.com/grabs/6111bb2e6dd61dc735e54a9825845f5459355cf8e0.png. Isn't it?

  I feel that I have some good ideas, but I can't find any additional documentation to check if I am barking the right tree. Any help would be useful!

  TIA

  what you have done with the drive is most likely the problem.

  uninstall your adobe applications, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall using the correct Setup files:

  Available downloadable Setup files:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: XI, X | 9,8 | 9 standard
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
  • Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
  • Lightroom: 5.7.1. 5 | 4 | 3
  • Captivate: 8 | 7 | 6 | 5.5, 5 | 1
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• activation key for the product during the victory 8.1 update

  I use HP ENVY m6 recently the hard drive had crashed. so I ordered for a recovery of hp and I put it and win8 installed. When I switch to 8.1 it ask for the product key. It shows that "this product key isn't not work.you might need to contact the store or company, that you have purchased from windows or you can buy a new key from microsoft"

  Hi @kalyanCN ,

  Welcome to the HP Forums!

  It is a wonderful place to find answers and ideas!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  I understand that your hard drive has crashed and you have ordered a recovery kit.  You did the recovery of Windows 8 and have now updated for Windows 8.1 but have a problem with activation.  Here is a link to Activate Product Windows 8 to help you solve this problem.

  If you still encounter a problem with the activation, I suggest that you contact HP support for help.

  Please contact our technical support at 800-474-6836. If you do not live in the United States / Canada region, please click on the link below to get a number of assistance for your region.

  World wide phone holder

  Good luck!

• Mac user. CS4 still active (not disabled) on my macbook pro DIED. Time Machine installed CS4 on my new macbook pro. Error message, "licensing for this product has stopped working". How can I disable my old macbook pro and activ DEAD CS4

  Mac user. CS4 still active (not disabled) on my macbook pro DIED. Time Machine installed CS4 on my new macbook pro. Error message, "licensing for this product has stopped working".

  How can I disable my old macbook DEAD pro CS4 and activate CS4 on my new mackbook pro?

  Hi Christophe,

  Please visit: https://helpx.adobe.com/x-productkb/policy-pricing/activate-deactivate-products.html

  Contact technical support for assistance:

  https://helpx.Adobe.com/in/contact.html?step=CCSN_adobe-ID-signing-in_stillNeedHelp

  I hope this helps.

  Concerning

  Megha Rawat

• Series Activation error "serial number is not valid for this product".

  I have Photshop CS5 Extended edition, but when I try to activate the key it comes up with the error "serial number is not valid for this product". The product has been activated twice before, but the installation does not come with the error "serial number is already in use" or something similar. Any ideas on how to solve this problem?

  Hi Dynamikzz,

  According to the error message you received "Serial number is not valid for this product", please follow the help as document below:

  Error "serial number is not valid for this product". Creative Suite

  Where you received the error message "Serial number is already in use", please follow the thread below the number of activations of Adobe CS5 applications is 2:

  Re: problem with serial number

  Kind regards

  Sheena

• VCA mode in settings of the cluster

  I was wondering what an experience everyone was with the VCA mode settings.  Usually allow you it?  What mode for processors Intel you choose usually?

  the only time you need to activate the VCA is when you have vMotion compatibility issues.  And when allowing it, CVS will choose what mode is the best

• VCA mode

  I try to enable CVS mode on a cluster, but get the message "host is not allowed in the compatibility mode of the current cluster Enhanced vMotion.". Under voltage or suspension of the virtual machines on the host can use CPU features hidden by fashion. ».

  The Group had initially 2 servers Dell PowerEdge R810 with dual cpu Intel Xeon E7540. I am trying to add 2 older servers Dell PowerEdge R900 with quad cpu Intel Xeon E7320. I'm guessing it wont let me enable it because virtual machines under tension using the more recent servers (R810) and their cpu. My guess is correct? I need to power all of my virtual machine to enable CVS or y at - it another way to activate?

  Hello

  Yes your proposal was correct. You can disable all your virtual machines to the VCA mode.

  More information about the activation of the CVS: VMware KB: VCA allowing on a cluster when vCenter runs in a virtual machine

  Kind regards

  Julien

• Problems with the VCA mode when moving to Vcentre 4.1

  Hi all

  I currently have three ESXi 4.0 update 3 host running in a cluster. Two servers are identical and the third a later generation of CPU. The cluster is running in mode VCA Intel i7 with success.

  Also, my server Vcentre is 4.0 update 3 running on a 32-bit Windows Server 2003 R2.

  I built a new server on Windows Server 2008 R2 Vcentre and I am running Vcentre 4.1 update 1.

  I did the exercise to my old server Vcentre guests to my new. No problem until I try and their cluster. My server with the latest CPU is not allowed admission to the cluster. The new cluster is running same EVC mode as the old cluster.

  Need to update 4.1 Vcentre 1 be backward compatible for EVC modes with respect to the material?

  The servers are all DELL R710, the old two servers running XEON X 5570 processors and the latest Intel XEON X 5670 processors host tracks

  Do I have to update all 3 hosts 4.1 before I can redefine the clusters in EVC mode?

  Hoping that someone has been through a similar experience and can advise you. Unfortunately, I do not have a test lab to run it on.

  See you soon. Mark

  I don' t think you need to upgrade to ESX host.

  I think try in the following order:

  (1) turn on VCA for cluster

  (2) add the latest processor, select baseline and then old processor server.

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1003212

  -A

• Activation of the guarantee for DT01ACA050

  Hi, I can't find the activation of the guarantee for the drive hard toshiba DT01ACA050.

  Can someone help me please?
  Thank you

  This page of Toshiba webclaim.
  This online service can be used to make a request for a defective product from Toshiba.
  http://weblord.toshiba-tro.de/Webclaim/

• The best mod for NB550D/02F news feed

  Hey fans of Mini Toshy,.

  There is no solid FULL only post on the net about how far you can push actully this material from end to end.
  In this post and other assignments YOU... I have a thread of a single window for geeks on this unit.

  The 32 bit Windows 7 OS [family, professional, ultimate] is the best support for chipset AMD grafix and various other drivers of ure choice, this is the best information that I have gathered... Please correct me if Im wrong?
  Also if changes 64bits como thrus thanks for posting in this thread :D
  What we geeks need to know is so information for the SATA controller on the card for the Toshiba NB550D/02F PLL5FA 02F02C, other newer models

  I have some fragmentary information, it could be SATA3 that will support an upgrade of a controller 6GBs SSD and some saying it is done SATA2 part of support 3GBs Committee but the S3 connection will still work saturate the speed of connection of the S2.
  This allows to get ALL the best mod for this sorting device information here and now!

  Post more... and thx 8 >)

  Yes, I noticed that some users here in the forum have had problems using the modules of RAM from Crucial, but Kingston modules seem to run ok.

  But you can extend the RAM to 2 GB only when a location is available as shown here:
  http://www.MyToshiba.co.nz/products/computers/nbseries/NB550D/pll5fa-02f02c/specifications#details

• Activation of reinstalled Windows Vista - the product key already in use message

  My system crashed - continueously runs blue and the cause was the motherboard. Replaced the motherboard and making it to level the motherboard and processor. The new motherboard and processor are compatible with Windows Vista. After you have reinstalled Windows Vista activation using the internet's message that the product key is already in use. What should do?

  If and only if you have a Vista "commercial" version, then you can try the phone activation.

  How to activate Windows 7 or Vista manually (activate by phone)
  http://support.Microsoft.com/kb/950929/en-us

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048
  (888) 725-1047 or 800-936-5700

  -Product key of letters and numbers-

  Not confused the letter B with the number 8, the letter Q with the letter O.
  the letter G and the number 6.

  A, E, I, O and u are not used.

  ----------------------------  Alternatives -------------------------------------

  To enable the use of the phone

  1. open Activation of Windows by clicking on the Start button, right click on computer, clicking Properties.
  then by clicking on activate Windows now. ?

  2. click on show me other ways to activate.

  3 type your Windows 7 product key, and then click Next.

  4. click on use the automated telephone and then click Next.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  5. click on the location nearest you from the drop-down list, and then click Next.

  6. call one of the available phone numbers listed. An automated system will guide you through the activation process.

  7. When prompted, enter the installation ID that is listed on your screen in your phone keypad.

  8 Note the confirmation ID the phone system gives you.

  9. under the terms of step 3, type the confirmation ID in the space provided, click Next, and then follow the instructions.

  10. If the activation is not successful, stay on the line to be transferred to a product activation agent who can help you.

  How to contact a Microsoft Product Activation Center by phone
  http://support.Microsoft.com/kb/950929

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Register Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/help/register
  Register Windows 7 and you automatically receive a series of three welcome to Windows e-mails
  filled with tips, creative tips and other information to you help get the most out of Windows 7.
  You also get a subscription to the monthly newsletter of Windows Explorer,
  where you will find other tips and tricks, as well as special offers.

  Learn about Activation:
  http://TechNet.Microsoft.com/en-us/library/ff793423.aspx

  J W Stuart: http://www.pagestart.com

• By connecting to Window Vista is errro ' configuration data for this product is damaged contact the support staff.

  1. I get this error before moving on to the windows vista login ' configuration data for this product is damaged contact the support staff "I tried repairing the system by using the Windows disk installation and chkdsk/f/r and none of the steps helped.
  2. on a different vista machine it keeps restarting on before we get to the opening of windows session, I managed to make system repair using the windows disc and he managed to survive but, unfortunately, after a couple of stop and restart, the same problem happens again.

  Kindly help on how I can make these problems disappear.

  Hello

  Method 1: Check to see if you can boot into safe mode. If you can start in safe mode, you can perform the clean boot and test functionality.

  Step 1: Check the functionality of the computer in safe mode.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  If it works fine, you can check if the problem exists in a clean boot state.

  Step 2: Perform the clean boot.

  http://support.Microsoft.com/kb/929135

  Note: After you check the clean boot feature configure Windows to use a Normal startup using step 7 proposed in the above mentioned link.

  Method 2: If you are unable to boot into safe mode, try to Start the computer using the disk and recovery options, select command prompt, run System File Checker tool.

  How to access the System Recovery Options menu?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  Download link for the tool (SFC.exe) System File Checker.

  http://support.Microsoft.com/kb/929833

  I hope this helps!

• Why it asks for a product key?

  I'm trying to connect my laptop and it keeps asking me for a product key.  I've had my laptop for about 4 years, they they run out or something?

  Hello

  ·          Did you do any hardware or software changes before this problem?

  ·          It seeks to activate or asks of each boot product key upwards?

  ·          What is the exact message that appears?

  Step 1: Check if Windows is activated.

  To check your Windows activation status, do the following:

  a. open system by clicking the Start button, clicking Control Panel, clicking system and Maintenance, and then click System.

  b. under Windows activation, you can see your activation status. You can also change your product key by clicking on change product key.

  http://Windows.Microsoft.com/en-us/Windows-Vista/activating-Windows-frequently-asked-questions

• Where is the support for Sonicwall products?

  I had a post on a topic that is important here since Friday 21. There is no entry at all. This seems to be a forum "network security" generic, non-specific to sonicwall, but I see nowhere elsewhere on the Dell site for questions on sonicwall products. The old forum of sonicwall is read-only.

  -What is it? It is quite appalling. If support for sonicwall products is this low I would hesitate before buying again the sonicwall.

  Uniquehandle,

  This isn't a technical support forum, a public forum that users and come to ask questions and get assistance with their products.

  Yes, just a forum for network security, they are spotted but especially all the posts here are the Dell SonicWALL UTM product and other related products.

  Yes, there is a lot of activity here of people like me, who work in technical support for Dell SonicWALL. But this isn't a replacement for Technical Support requests.

  No, we are not required to answer questions on this forum, but we do so in the interest of the community and to increase the amount of knowledge that our users have. This helps to learn more about the product and have the ability to help other people on this forum when they display asking questions. There is also no SLA on response to any post on this forum.

  Yes, the SonicWALL forum was read-only for a while that we are Dell SonicWALL and our community is now the responsibility of the Dell family.

  Our support for our products is very strong and only get better every day. Yes, our support is provided with a contract, but this is to make sure that we, Dell SonicWALL, can pay the technicians.

  From what you've posted so that you do not have a support contract with us very probably you don't have a case with Technical Support. If this isn't the case, you do not have a case with technical support and troubleshooting went beyond your support contract send me a DM and I will look into the issue.

  WARNING: It is, in any case form or shape, a guarantee that I have the poster of this response, or any other employee of SonicWALL Dell will be troubleshoot or solve your problem via this medium. It's just to discuss the issue with the opportunity to provide a form of help and guidance with your question.

  #Iwork4Dell

• the activation server determined that the specified product key cannot be used to 0xC004C008

  Hello

  I'm running a server KMS on Windows server 2012 R2 and I have enabled more than 300 PC and servers.

  But for some reason, can no longer trigger the new PCs and servers. They get 0xc004c008 the activation server determined that the specified product key cannot be used.

  Nothing has changed on the KMS server and I do not see where the KMS host key could be used outside of the host itself.

  All ideas

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.