Active-passive HA topology

Similar Questions

• Active/passive HA comments with shared vmdk

  I have 2 ESXi host with a vmfs on iSCSI SAN.

  I want to install 2 identical VM on each host suite HR cluster in active/passive mode.

  I intend to set up the two VM with a disc 'private' for the base OS/APP installation and a 'common' one disk for data

  managed by the services that are configured in active/passive mode (for example, MySQL, OpenLDAP).

  The goal is that when the master virtual machine fails (because of true judgment of breach or ESXi host simpleVM), the slave VM built the commune

  VMDK and starts the cluster services.

  I've read a few articles on the possibility of sharing a vmdk disk so the solution seems possible.

  Is there someone who has used such a configuration?

  TIA,

  Guido

  An alternative is to create a network of VM for iSCSI (depending on your SAN topology, you must also 2 storage networks).

  Then, you can add this network to the virtual computer, install the initiator software and set it up as a physical machine.

  André

  * If you found this device or any other answer useful please consider awarding points for correct or helpful answers

• Communicator TCP active & passive can not communicate with graphic

  Hello

  I send and receive TCP Communicator Active & Passive data.

  I have change and can now show data(given fixed) and graphic.

  My Active part can work. But I can't send liabilities...

  confused ha... hahahs.

  
  

• IPS modules in the ASA config for active/passive failover

  Hey guys,.

  We have two ASA in a situation of active/passive failover each with a module AIP-SSM-20 IPS.

  These modules are intended to synchronize their configs like the ASA do? Alternatively, they each have a separate entity and each need to be configured separately?

  Thanks for any help!

  Each will have their own IP address, and each must be configured separately.

  They will not communicate with each other and share no configuration.

  You will need to make sure the config is changed in one of the other.

  Monitoring station pull events from two sensors.

  The SSMs rely on the SAA for the TCP state tracking so they will work very well in a design of failover ASA.

• In Active/Passive Mode Radius server configuration

  We set up (active/active) the two ASA load balancing.  We also configure two Radius servers with load balancing.  At present, the Radius servers are configured with active/active.  Is it possible to configure a Radius Server with (active/passive)?

  RADIUS protocol Radius AAA server
  AAA-server Radius (inside) host XXX.XXX.XXX.XXX
  Timeout 300
  key *.
  RADIUS-common-pw *.

  AAA-server Radius (inside) host XXX.XXX.XXX.XXX
  Timeout 300
  key *.
  RADIUS-common-pw *.

  AAA accounting enable console RADIUS

  Thank you.

  Diane

  Diane,

  Well I'm still not 100% sure that you understand exactly what is happening. Normally, on a single ASA, authentication is always performed on the same radius server until it fails (i.e. active/passive as you call it).

  Now, you mention that you have 2 ASAs in load balancing, so I don't know if you mean that:

  (1) 2 users that connect to the same ASA get authenticated by radius 2 servers different (should never happen)

  or

  (2) when 2 users connect to the cluster, user1 gets redirected to ASA1 and authenticated on Radius1, while User2 will be redirected to ASA2 using Radius2 to auth. This could be normal if both ASAs are set up differently (defined in a different order radius servers) or an ASA had a problem connecting to Radius1, at some point and so it considered out of service.

  In any case, 'sh aaa-server protocol radius' and 'debug RADIUS' can help determine why an asa individual does not use (initially configured) primary radius server.

  HTH

  Herbert

• licenses for a cisco ASA active/passive pair AnyConnect SSL

  Hi all. I buy 2 5512 x ASAs is configured like a pair of active/passive as a VPN device. I need to purchase licenses for both devices anyconnect? Thank you

  Licenses AnyConnect Essentials (or premium) are combined on a cluster failover ASA. Reference

  So, buy once only the quantity and type of licenses you need based on your end users - not based on the number of ASAs - and they will be available at the ASA Active whether primary or secondary unit.

• Is it possible to install oracle fail-safe-kind-of (active-passive) SAN replication for oracle?

  Dear Experts,

  Is it possible to configure replication of SAN (active-passive) integrated security for oracle for oracle?

  To get the RTO < 60 seconds

  • If the primary host fails, the remote site should have the option to start the oracle database.
  • Sites are geographically remote.

  SAN storage replication, can it be used in my scenario?

  • I have no option to implement oracle Data Guard as its very expensive.

  Is that what someone achieved something similar with SAN storage replication?

  • I have oracle SE.
  • It is obvious that the all-flash backup can be quick.

  What should be the strategy to have DR site get a few seconds, if the primary site failed for some reason any

  • Daily incremental backup with RMAN. And archive backup runs for every 1 minutes
  • To have the site of DR upward and running within 60 seconds, it still requires too much time to restore the database on remote site and have archive APPLIED setpoint
  • What could be the solution with san replication? RTO is 60 seconds

  Thanks and greetings

  SAN storage replication, can it be used in my scenario?

  I have no option to implement oracle Data Guard as its very expensive.

  --> If you want to use the data that it is free of CHARGE, additional license is not required for normal data guard

  --> additional license is only for the ADG

  Is that what someone achieved something similar with SAN storage replication?

  I have oracle SE.

  It is obvious that the all-flash backup can be quick.

  --> Here, I understand that if oraclle EA is going to be expensive

  --> Again, you can use manual standby

  --> What you are looking for SAN replication, you will need to check with the storage vendor

  --> If your intention is to check with oracle storage, then this may be the correct discussion room

  What should be the strategy to have DR site get a few seconds, if the primary site failed for some reason any

  Daily incremental backup with RMAN. And archive backup runs for every 1 minutes

  To have the site of DR upward and running within 60 seconds, it still requires too much time to restore the database on remote site and have archive APPLIED setpoint

  What could be the solution with san replication? RTO is 60 seconds

  --> If your intention is to check with oracle storage, then this may be the correct discussion room

  Check in this

  https://community.Oracle.com/community/Server_%26_storage_systems/storage

• What is active/active and active/passive

  Hi all

  What is the difference between active/active and active/passive in the configuration of the DR?

  What are the advantages and disadvantages?

  Please suggest entries to learn more. Provide also available documents.

  Thanks in advance.

  Kind regards

  Krish

  Probably, you want to know the benefits of active dataguard and dataguard 'normal '.

  With active dataguard relief database can be opened read-only, and updates are applied to the primary real-time.

  With normal dataguard the standby database is installed and update are applied but if you open the database in read-only mode, no updates will be applied.  You must put the database in managed for updates to apply recovery mode.

  Clearly, the advantage is that you can use the database Eve with active dataguard for various purposes such as reporting in real time.

  However, active dataguard is an option under license and do not pay for it.

  http://www.Oracle.com/technetwork/database/Enterprise-Edition/Overview/Active-Data-Guard-11g-datasheet-1-134534.PDF

• Behavior of Transaction flow task and AM Activation/Passivation

  Hi all
  
  In my app, when I changed the 'No controller Transaction' transaction behavior to ' use existing Transaction if Possible', I started to see the following type of AM instant of Passivation is JDev journal:
  
  ---
  
  < ADFLogger > < start > passivation Application Module
  TabName * PCollManager.resolveName* * < PCollManager > < resolveName > [3560] = PS_TXN
  < DBTransactionImpl > < getInternalConnection > [3561] get a connection for internal use...
  < DBTransactionImpl > < getInternalConnection > [3562] creating internal connection...
  < ADFLogger > < start > connect to database
  < DBTransactionImpl > < establishNewConnection > [3563] Trying connection: DataSource='weblogic.jdbc.common.internal.RmiDataSource@4d0ca0'...
  < DBTransactionImpl > < establishNewConnection > [3564] before getNativeJdbcConnection =' weblogic.jdbc.wrapper.JTAConnection_weblogic_jdbc_wrapper_XAConnection_oracle_jdbc_driver_LogicalConnection
  < DBTransactionImpl > < establishNewConnection > [3565] after getNativeJdbcConnection =' weblogic.jdbc.wrapper.JTAConnection_weblogic_jdbc_wrapper_XAConnection_oracle_jdbc_driver_LogicalConnection
  < ADFLogger > < addContextData > establish database connection
  < ADFLogger > < end > establish database connection
  < OraclePersistManager > < syncSequenceIncrementSize > [3566] * syncSequenceIncrementSize * changed "increment" sequence to 50 value
  Passivation of < ViewObjectImpl > < doPassivateSettings > [3567] DateTimeVO1 with paramsChanged
  < serializer > < passivate > [3568] < AM MomVer '0' = >
  < cd / >
  < TXN Def = New '1' = '0' Lok = tsi '2' = '0' PCID = "40" / >
  < CONN / >
  < VO >
  < VO sig = qf '1315216374468' = '0' RS = '0' Def = "com.emerson.eth.adf.model.view.BaseRoutingMainVO" Name = "BaseRoutingMainVO1" / > "
  < VO sig = qf '1315216374468' = '0' RS = '0' Def = "com.emerson.eth.adf.model.view.BaseRoutingDetailsVO" Name = "BaseRoutingDetailsVO1" / > "
  < VO sig = qf '1315216374468' = '0' RS = '0' Def = "com.emerson.eth.adf.model.view.BaseParameterVO" Name = "BaseParameterVO1" / > "
  < VO sig = qf '1315216374468' = '0' RS = '0' Def = "com.emerson.eth.adf.model.view.BaseErrorLookupVO" Name = "BaseErrorLookupVO1" / > "
  < VO sig = qf '1315216374468' = '0' RS = '0' Def = "com.emerson.eth.adf.model.view.BaseCompDataHdrVO" Name = "BaseCompDataHdrVO1" / > "
  < VO sig = qf '1315216374468' = '0' RS = '0' Def = "com.emerson.eth.adf.model.view.BaseCompDataDtlVO" Name = "BaseCompDataDtlVO1" / > "
  < VO sig = qf '1315216374468' = '0' RS = '0' Def = "com.emerson.eth.adf.model.view.BaseDataReqValVO" Name = "BaseDataReqValVO1" / > "
  < VO sig = qf '1315216374468' = '0' RS = '0' Def = "com.emerson.eth.adf.model.view.BaseRegistrationPointVO" Name = "BaseRegistrationPointVO1" / > "
  < VO sig = qf '1315216374468' = '0' RS = '0' Def = "com.emerson.eth.adf.model.view.BaseTradingPrtnrInfoVO" Name = "BaseTradingPrtnrInfoVO1" / > "
  < VO sig = qf '1315216374468' = '0' RS = '0' Def = "com.emerson.eth.adf.model.view.BaseTradingPrtnrVerCtrlVO" Name = "BaseTradingPrtnrVerCtrlVO1" / > "
  < VO sig = qf '1315216374468' = '0' RS = '0' Def = "com.emerson.eth.adf.model.view.BaseNotificationVO" Name = "BaseNotificationVO1" / > "
  < VO sig = qf '1315216374468' = '0' RS = '0' Def = "com.emerson.eth.adf.model.view.BaseTransactionDefVO" Name = "BaseTransactionDefVO1" / > "
  < VO sig = qf '1315216374468' = '0' RS = '0' Def = "com.emerson.eth.adf.model.view.BaseValidationTypeVO" Name = "BaseValidationTypeVO1" / > "
  < VO sig = qf '1315216374468' = '0' RS = '0' Def = "com.emerson.eth.adf.model.view.OrigTransDetailsVO" Name = "OrigTransDetailsVO1" / > "
  < VO sig = qf '1315216374468' = c '0', '0' = da = '1' he = '1' St = '0' im '1' = '1' Def = Ex = "com.emerson.eth.adf.model.view.TradingPartnerBaseVO" Name = "TradingPartnerBaseVO1" > "
  < rsq >
  <! [CDATA [SELECT / * + FIRST_ROWS * / * OF QRSLT (SELECT ' X' IN the DOUBLE TRADING_PARTNER_ID)]] >
  < / rsq >
  < Key >
  <! [CDATA [00010000000158]] >
  < / key >
  < /VO >
  < VO sig = qf '1315216374468' = '0' RS = '0' Def = "com.emerson.eth.adf.model.view.TransErrorVO" Name = "TransErrorVO1" / > "
  < VO sig = qf '1315216374468' = c '0' = '0' It = '1' Sz "25" = St = '0' = '1' = '1' Def Ex im = "com.emerson.eth.adf.model.view.DateTimeVO" Name = "DateTimeVO1" > "
  < exArgs count = "1" >
  < name arg = "Time zone" >
  <! [CDATA [GMT]] >
  < / arg >
  < / exArgs >
  < rsq >
  <! [CDATA [SELECT / * + FIRST_ROWS * / * FROM (SELECT CurrentTime OF)]]
  (
  SELECT TO_CHAR(SYSDATE,'DD-MON-YYYY HH:MI AM') AS CurrentTime, 'GMT' AS TZ OF DOUBLE
  UNION
  SELECT TO_CHAR(SYSDATE+5.5/24,'DD-MON-YYYY HH:MI AM') AS CurrentTime, 'IST' DOUBLE TZ
  UNION
  SELECT TO_CHAR(SYSDATE-8/24,'DD-MON-YYYY HH:MI AM') AS CurrentTime, 'PST' AS TZ OF DOUBLE
  UNION
  SELECT TO_CHAR(SYSDATE-6/24,'DD-MON-YYYY HH:MI AM') AS CurrentTime, 'CSE' AS TZ OF DOUBLE
  UNION
  SELECT TO_CHAR(SYSDATE-5/24,'DD-MON-YYYY HH:MI AM') AS CurrentTime, 'EAST' AS TZ OF DOUBLE
  )
  (OÙ les TZ =: TimeZone) QRSLT]] >
  < / rsq >
  < Key >
  <! [CDATA [0000000000010000013239013AC4]] >
  < / key >
  < /VO >
  < VO sig = qf '1315216374468' = '0' RS = '0' Def = "com.emerson.eth.adf.model.view.TransTrackingVO" Name = "TransTrackingVO1" / > "
  < VO sig = qf '1315216374468' = '0' RS = '0' Def = "com.emerson.eth.adf.model.view.TransDependencyVO" Name = "TransDependencyVO1" / > "
  < VO sig = qf '1315216374468' = c '0', '0' = da = '1' he = '1' St = '0' im '1' = '1' Def = Ex = "com.emerson.eth.adf.model.view.TradingPartnerBaseVO" Name = "TradingPartnerBaseVO2" > "
  < rsq >
  <! [CDATA [SELECT / * + FIRST_ROWS * / * OF QRSLT (SELECT ' X' IN the DOUBLE TRADING_PARTNER_ID)]] >
  < / rsq >
  < Key >
  <! [CDATA [00010000000158]] >
  < / key >
  < /VO >
  < VO sig = qf '1315216374468' = '0' RS = '0' Def = "com.emerson.eth.adf.model.view.ReceiverTransDetailsVO" Name = "ReceiverTransDetailsVO1" / > "
  < VO sig = qf '1315216374468' = c '0', '0' = da = '1' he = '1' St = '0' im '1' = '1' Def = Ex = "com.emerson.eth.adf.model.view.TransIDBaseVO" Name = "TransIDBaseVO1" > "
  < rsq >
  <! [CDATA [SELECT / * + FIRST_ROWS * / * (select 1 AS transaction_record_id from DUAL) QRSLT]] >
  < / rsq >
  < Key >
  <! [CDATA [000100000002C 102]] >
  < / key >
  < /VO >
  < VO sig = qf '1315216374468' = c '0', '0' = da = '1' he = '1' St = '0' im '1' = '1' Def = Ex = "com.emerson.eth.adf.model.view.TransKeyBaseVO" Name = "TransKeyBaseVO1" > "
  < rsq >
  <! [CDATA [SELECT / * + FIRST_ROWS * / * (SELECT 'x' AS document_key FROM dual) QRSLT]] >
  < / rsq >
  < Key >
  <! [CDATA [00010000000158]] >
  < / key >
  < /VO >
  < VO sig = qf '1315216374468' = c '0', '0' = da = '1' he = '1' St = '0' im '1' = '1' Def = Ex = "com.emerson.eth.adf.model.view.TransStatusBaseVO" Name = "TransStatusBaseVO1" > "
  < rsq >
  <! [CDATA [SELECT / * + FIRST_ROWS * / * OF QRSLT (SELECT 'X' AS CONDITION OF the DOUBLE)]] >
  < / rsq >
  < Key >
  <! [CDATA [00010000000158]] >
  < / key >
  < /VO >
  < VO sig = qf '1315216374468' = c '0', '0' = da = '1' he = '1' St = '0' im '1' = '1' Def = Ex = "com.emerson.eth.adf.model.view.ErrorTypeBaseVO" Name = "ErrorTypeBaseVO1" > "
  < rsq >
  <! [CDATA [SELECT / * + FIRST_ROWS * / * FROM QRSLT (SELECT 'X' AS ERROR_TYPE FROM DUAL)]] >
  < / rsq >
  < Key >
  <! [CDATA [00010000000158]] >
  < / key >
  < /VO >
  < VO sig = qf '1315216374468' = c '0', '0' = da = '1' he = '1' St = '0' im '1' = '1' Def = Ex = "com.emerson.eth.adf.model.view.DependencyBaseVO" Name = "DependencyBaseVO1" > "
  < rsq >
  <! [CDATA [SELECT / * + FIRST_ROWS * / * OF QRSLT (SELECT 'X' as a DEPENDENCY OF the DOUBLE)]] >
  < / rsq >
  < Key >
  <! [CDATA [00010000000158]] >
  < / key >
  < /VO >
  < VO sig = qf '1315216374468' = '0' RS = '0' Def = "com.emerson.eth.adf.model.view.MasterTransDependencyVO" Name = "MasterTransDependencyVO1" / > "
  < VO sig = qf '1315216374468' = '0' RS = '0' Def = "com.emerson.eth.adf.model.view.TrackingVO" Name = "TrackingVO1" / > "
  < VO sig = qf '1315216374468' = '0' RS = '0' Def = "com.emerson.eth.adf.model.view.ErrorVO" Name = "ErrorVO1" / > "
  < VO sig = qf '1315216374468' = '0' RS = '0' Def = "com.emerson.eth.adf.model.view.DashboardTransErrorVO" Name = "DashboardTransErrorVO1" / > "
  < VO sig = qf '1315216374468' = '0' RS = '0' Def = "com.emerson.eth.adf.model.view.DashboardTransDependencyVO" Name = "DashboardTransDependencyVO1" / > "
  < VO sig = qf '1315216374468' = '0' RS = '0' Def = "com.emerson.eth.adf.model.view.DashboardTransPieVO" Name = "DashboardTransPieVO1" / > "
  < VO sig = qf '1315216374468' = '0' RS = '0' Def = "com.emerson.eth.adf.model.view.DashboardMasterTransBarVO" Name = "DashboardMasterTransBarVO1" / > "
  < VO sig = qf '1315216374468' = c '0', '0' = da = '1' he = '1' Sz = '25' St = '0' im '1' = '1' Def = Ex = "com.emerson.eth.adf.model.view.ReceiverTransStatusBaseVO" Name = "ReceiverTransStatusBaseVO1" > "
  < rsq >
  <! [CDATA [SELECT / * + FIRST_ROWS * / * OF QRSLT (SELECT 'X' AS CONDITION OF the DOUBLE)]] >
  < / rsq >
  < Key >
  <! [CDATA [00010000000158]] >
  < / key >
  < /VO >
  < VO sig = qf '1315216374468' = c '0', '0' = da = '1' he = '1' Sz = '25' St = '0' im '1' = '1' Def = Ex = "com.emerson.eth.adf.model.view.ErrorStatusBaseVO" Name = "ErrorStatusBaseVO1" > "
  < rsq >
  <! [CDATA [SELECT 'X' IN the DOUBLE ERROR_STATUS]] >
  < / rsq >
  < Key >
  <! [CDATA [00010000000158]] >
  < / key >
  < /VO >
  < VO sig = qf '1315216374468' = '0' RS = '0' Def = "com.emerson.eth.adf.model.view.HeaderVO" Name = "HeaderVO1" / > "
  < VO sig = qf '1315216374468' = '0' RS = '0' Def = "com.emerson.eth.adf.model.view.TradingPartnerBaseVO" Name = "TradingPartnerBaseVO3" / > "
  < VO sig = qf '1315216374468' = c '0', '0' = da = '1' he = '1' Sz = '25' St = '0' im '1' = '1' Def = Ex = "com.emerson.eth.adf.model.view.HeaderStatusBaseVO" Name = "HeaderStatusBaseVO1" > "
  < rsq >
  <! [CDATA [SELECT 'X' AS CONDITION OF the DOUBLE]] >
  < / rsq >
  < Key >
  <! [CDATA [00010000000158]] >
  < / key >
  < /VO >
  < VO sig = qf '1315216374468' = '0' RS = '0' Def = "com.emerson.eth.adf.model.view.TradingPartnerBaseVO" Name = "TradingPartnerBaseVO4" / > "
  < VO sig = qf '1315216374468' = c '0', '0' = da = '1' he = '1' Sz = '25' St = '0' im '1' = '1' Def = Ex = "com.emerson.eth.adf.model.view.HeaderSourceFileNameBaseVO" Name = "HeaderSourceFileNameBaseVO1" > "
  < rsq >
  <! [CDATA [SELECT 'X' AS SOURCE_FILE_NAME DUAL FROM]] >
  < / rsq >
  < Key >
  <! [CDATA [00010000000158]] >
  < / key >
  < /VO >
  < VO sig = qf '1315216374468' = c '0', '0' = da = '1' he = '1' Sz = '25' St = '0' im '1' = '1' Def = Ex = "com.emerson.eth.adf.model.view.DependencyStatusBaseVO" Name = "DependencyStatusBaseVO1" > "
  < rsq >
  <! [CDATA [SELECT 'X' IN the DOUBLE DEPENDENCY_STATUS]] >
  < / rsq >
  < Key >
  <! [CDATA [00010000000158]] >
  < / key >
  < /VO >
  < VO sig = vok '1315216382156' = '20' qf = '0' RS = '0' Def = "com.emerson.eth.adf.model.view.HeaderSourceFileNameLOVVO" Name = "_LOCAL_VIEW_USAGE_com_emerson_eth_adf_model_view_HeaderSourceFileNameBaseVO_HeaderSourceFileNameLOVVO1" / > "
  < VO sig = vok '1315216384812' = '20' qf = '0' RS = '0' Def = "com.emerson.eth.adf.model.view.ReceiverTransStatusLOVVO" Name = "_LOCAL_VIEW_USAGE_com_emerson_eth_adf_model_view_ReceiverTransStatusBaseVO_ReceiverTransStatusLOVVO1" / > "
  < VO sig = vok '1315216385921' = '20' qf = '0' RS = '0' Def = "com.emerson.eth.adf.model.view.HeaderStatusLOVVO" Name = "_LOCAL_VIEW_USAGE_com_emerson_eth_adf_model_view_HeaderStatusBaseVO_HeaderStatusLOVVO1" / > "
  < VO sig = vok '1315216387093' = '20' qf = '0' RS = '0' Def = "com.emerson.eth.adf.model.view.ErrorStatusLOVVO" Name = "_LOCAL_VIEW_USAGE_com_emerson_eth_adf_model_view_ErrorStatusBaseVO_ErrorStatusLOVVO1" / > "
  < VO sig = vok '1315216388171' = '20' qf = '0' RS = '0' Def = "com.emerson.eth.adf.model.view.DependencyStatusLOVVO" Name = "_LOCAL_VIEW_USAGE_com_emerson_eth_adf_model_view_DependencyStatusBaseVO_DependencyStatusLOVVO1" / > "
  < VO sig = vok '1315216393937' = '20' qf = '0' RS = '0' Def = "com.emerson.eth.adf.model.view.TransIDLovVO" Name = "_LOCAL_VIEW_USAGE_com_emerson_eth_adf_model_view_TransIDBaseVO_TransIDLovVO1" > "
  < VC n = d '__ImplicitViewCriteria__' = 'true' c = '0' = 'true' m bv = '1' j = "false" >
  < SC >
  < p n = v "showInList" = "true" / >
  < p n = v "displayName" = "Default search" / >
  < / vcp >
  < rank n = uc "vcrow1" = "0" cj = "0" >
  < has i = "0" >
  < I have o = cj '=' = '1' uc = r '0' = '2' vb = 'false' g = 'true' e = 'false' re = "false" >
  < iv I = '0' b = '0' FS = "0" / >
  < /i >
  < /a >
  < has i = "1" >
  < I o = 'STARTSWITH' cj = uc '1' = '0' o = '2' vb = 'false' g = 'true' e = 'false' re = "false" >
  < iv I = '0' b = '0' FS = "0" / >
  < /i >
  < /a >
  < / row >
  < /VC >
  < VC n = d 'LOV_TransactionRecordId__lov__filterlist__vcr___' = 'true' c = '0' = 'true' m bv = '3' j = "false" >
  < rank n = uc "LOV_TransactionRecordId__lov__filterlist__vcr___" = "0" cj = "0" >
  < has i = "0" >
  < I have o = cj '=' = '1' uc = r '0' = '2' vb = 'false' g = 'true' e = 'false' re = "false" >
  < iv I = '0' b = '0' FS = "0" >
  <! [CDATA [40532]] >
  < /iv >
  < /i >
  < /a >
  < / row >
  < /VC >
  < /VO >
  < /VO >
  < /AM >
  
  < OraclePersistManager > < insert > [3569] * insert * id = 1, Thierry =-1, collid = 65951, keyArr.len = 1, cont.len = 10035
  stmt < OraclePersistManager > < insert > [3570]: insert into 'PS_TXN' values (: 1,: 2: 3: 4, sysdate)
  < OraclePersistManager > < validation > [3571] * ops commit * #pending = 1
  Passivation < ADFLogger > < end > Application module
  
  ---
  
  My question is does AM gets passivees on each request. This snapshot is not visible when the Transaction behavior is set to "No controller Transaction."
  This type is instant is usually visible in the case of 'No Transaction controller', when AM pooling is turned off or if'M bundling is enabled then is supported for failover.
  Is this OK for this snapshot to appear in the journal JDev or am I missing something?

  This might be useful, can u chk
  Uses the subtle the workflow behavior 'No Controller Transaction'
  http://blogs.Oracle.com/raghuyadav/entry/adf_taskflow_transaction_manag
  http://andrejusb.blogspot.com/2010/01/Demystifying-ADF-BC-passivation-and.html

• Dual active/passive failover of ISP with static Nat on Cisco 1941

  Hello world

  I'm working on a configuration of a client and I have everything in place right now except the NAT' static ing.  The config fails during an ISP to another and track als and routes by default static weighted, the PAT rocking with course to each interface maps.  It is, is it possible to switch on the large amount of static NAT entries to the ISP of backup?  So far, everything I've read said no because you can have only one entry per ip/port combo, other than another configuration static NAT double server with a different IP address.  I just want to be sure before making my recommendations, all thoughts are greatly appreciated.

  Thank you

  Brandon

  In fact, you can also long as you use standard NAT ("ip nat inside source static") or not NVI ('ip nat static source') for your attackers. You apply the roadmap by the end of the static NAT statement to indicate which interface it should apply to. So, if you have something like this:

   ip access-list extended ACL_NAT permit ip 192.168.0.0 255.255.255.0 any ! route-map RM_NAT_ISP1 match ip address ACL_NAT match interface GigabitEthernet0/1 ! route-map RM_NAT_ISP2 match ip address ACL_NAT match interface GigabitEthernet0/2 

  Using port 80/tcp for example, you can do this:

   ip nat inside source static tcp x.x.x.x 80 y.y.y.y 80 route-map RM_NAT_ISP1 ip nat inside source static tcp x.x.x.x 80 z.z.z.z 80 route-map RM_NAT_ISP2 

  Just replace x.x.x.x with the LAN address of the machine that you are shipping y.y.y.y with the WAN address you are shipping on isps1 and z.z.z.z with the address of the ISP WAN you are shipping on ISP2. The static NAT will be conditional on the roadmap, at this point.

  This works with TCP, UDP, and IP forwarding, but does not require that you use an IPv4 address to your WAN address. For some reason, it does not work if you use an interface... so if you're using dynamic addresses, it will be more complicated.

• Activation / passivation issue: empty template list

  Hi guys,.

  I use jdev 11.1.1.6.0 and I have a strange behavior for this use case:

  I have on a screen, a simple table read-only synced to a form that is used to be able to update the data.

  In this form there is a list-based model (RichSelectOneChoice faces) which is normally directly fill in the data and in conditions normal case it works fine but

  When I disable put ApplicationModule in common in the configuration of the application module to test the bad situations, I have a problem.

  The arrival on the screen, it's OK. It appears when I select a row in the table or when I filter the table or sorting (I think an executeQuery effect)

  The list is empty (no line) and I have this message in the newspaper of the ADF:

  < FacesCtrlListBinding > < getInputValue > ADFv: could not find an item selected corresponding to the value 9 type oracle.jbo.domain.Number in the list of values (LOV).

  Normal because the list is empty after the action so he can't match the value selected in the LOV.

  I don't understand why the list is not full...

  someone has encounterd a such effect?

  Thanks for any help,

  David

  HI guys,.

  I find the reason, but I don't know exactly why...

  In your VO .xml file, you have a ViewAccessor tag associated with your LOV.

  By default, the RowLevelBinds property is set to true. My Watchlist has No bindvariable (that is to say, this list is the same for all lines) so I remove,

  After doing that I observed im my journal that the data in the list has been passivees in the XML file, and so on the interface of the interface user, the list has been correctly populated and non-empty as previously.

  Should we consider as a Bug of the ADF? Anyone has the explanation oh this behavior according to the definition of this property?

  Kind regards

  David

• Can we use "Round Robin" political path active / Passive SAN?

  Hello

  We use EMC CLARiiON CX4 SAN.  So what we know, it's an asset / liability SAN.

  We would like to know if we can use "Round Robin" way so that we can get better IO performance?  Is there any SAN required tweaking or ESX host?

  Thank you

  Storage is a type ALUA.

  To activate the Robin:

  http://www.vmwareinfo.com/2010/07/how-to-enable-ALUA-and-round-robin.html

  André

• Passive active Essbase 11.1.2.3 Clustering

  Hello

  Is supported for the Windows Active Passive Clustering environment?

  Installation and Configuration Guide Release 11.1.2.2

  I can see that it is supported only on Linux. Please confirm if she is supported in a Windows environment as well.

  Thank you

  NGO Mopala

  I assume you mean of Essbase, yes it is supported on windows - Configuration Active / Passive Essbase Clusters (Windows)

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Active control of vibration of the flexible mono-faisceau

  Hi, im working on the active control of vibration of the unique flexible built-in beam, and I need to design that helps me control the beam active & passive.

  two experiences of control a robot with unique flexible bond. The link is operated in bending by two piezoelectric glued to the surface, and the local curvature is measured by piezoelectric sensors, forming a pair of sensors/actuators colocated. In both experiments, the articulation describes the same polynomial trajectory that excites the Eigen modes of vibration of the binding. In the first experiment anti-vibration with piezoelectric actuators are off, and we can observe a very long time to maneuver as link oscillations themselves naturally. In the second experiment anti-vibration are lit, and a significant reduction in the time settling is reached

  material

  1 - nor cdaq-9178

  2 - PS piezo

  3 - piezo amplifier

  4 inputs daq 9215

  5-output daq 9263

  performs one of the two substances vi my requirement

  Cabo,

  So, it looks like part of what you are trying to do is the generation control system a PID in LabVIEW. Fortunately, LabVIEW includes a number of useful resources for the PID:

  Here is one of our books (with the tutorial files) whites, discussing implementations in LabVIEW PID: http://www.ni.com/white-paper/6440/en/

  Here is another tutorial on implementing PID using the PID.vi: http://www.ni.com/pdf/labview/us/implement-a-pid-control-system.pdf

  Here is the help documentation for PID.vi himself: http://zone.ni.com/reference/en-XX/help/371361L-01/lvpid/pid_vi/

  Finally, example finder LabVIEW has a large number of projects example PID you can experiment with. Just go to help > find examples, then find "PID" and select any project matches your planned the best implementation.

• NX7009 - Checkpoint FW layer 2 and layer 3 topology?

  We have two pairs of NX7009 and a pair of Checkpoint 12600. Pair of control point will be active/passive mode.

  A pair of NX7009 will be connected to the pair of Checkpoint in trunk of layer 2. The other pair of NX7009 is connected to the same pair of Checkpoint but like layer 3 connection.

  In each pair of NX7009, a NX7009 have a connection at a checkpoint, and the 2nd NX7009 have a connection to the other checkpoint. For circuits of layer 2 between NX7009 and Checkpoint, we should put the two ports (one on each NX7009) NX7009 in VPC? I don't know if it will work since Checkpoint only knows about the current connection in active/passive mode.

  For Layer 3 connection between the control point and to the pair of NX-7009, what is the best practice by doing this? I know that it's not recommended to NX7009 VPC port-channel layer 3.

  Thanks for any suggestions

  happy to help, this is a very good link to start so

  http://bradhedlund.com/2010/12/16/routing-over-Nexus-7000-VPC-peer-link-Yes-and-no/

  and do not forget to note the useful messages

  Kind regards