ADAM 4050

Similar Questions

• Ansel Adams missing desktop photo

  Hi all

  Yesterday I udated my macbook for OS X El Capitan.

  Now my desktop image disappeared, Ansel Adams winter Sunrise, Sierra Nevada.

  Really makes me sad cause I liked this image. How do I get it back? Thank you.

  -Venus

  Where she acquired this picture from?

  Where on your hard drive to save to send it?

• Printing problems with HP LaserJet 4050 TN

  Hi all

  I have a HP LaserJet 4050 TN and I connected on my desktop Dell (8 64-bit Windows) with a parallel cable / USB (TrendNet 1284).

  When I try to print, nothing happens (eventually I get an error message from Windows 8 on the right that says: "error of HP LaserJet printing...) The printer could not print").

  The printer is on, of course, and it is able to print (for example, test configuration page prints very well).

  From the printer connection, looks like it automatically installed the HP LaserJet 4050 Series PCL 5 driver.  I tried to update and it says that it is up-to-date.

  Any ideas what the problem may be?  Thanks for any help you can provide!

  ----

  Edit

  ----

  Just to add that this printer model seems not support a network connection for the HP site. I try the parallel-usb connection since it seems to be the only option to connect the printer to my computer.

  More that likely the IP you have assigned manually whenever you got the printer. The Jet Direct card is when you connect the ethernet cable into the printer. I have 2 screws in the top and bottom.

  What I would do is a cold reset so your home network could affect its own IP address.

  With the printer off, press the big green button, and then turn on the printer. Wait what he say cold reset on the display, then release the button. Connect your network cable, wait about 1 to 2 minutes for DHCP to assign an IP address and print a configuration page. The second page will show you the IP address.

  Then go to your driver, click on Ports and change the port to a Standard TCP/IP port. If it is not available, then create a new port. Enter the IP address of the printer and print a test page.

• 4050 ScanJet photo scanner: downloaded the new software and drivers for HP

  Photo scanner and os X P 4050 scanner has stopped working and went to hp website and downloaded the software installed. System would not open or scan. I've tried a lot of ideas but have not succeeded. I have a HP printer also and am about to delete all hp software and start again. Any ideas would be greatly appreciated.

  George

  follow-up of your prospects and had partial success. I went back and downloaded the software again and the good results.  Thank you!!!

• HP LaserJet 4050: HP LaserJet 4050 drivers: image of the printer to the Download Page doesn't look like my printer

  I'm looking for drivers for a HP LaserJet 4050. The image of the printer on this page looks nothing like the printer I have. HP has a mistake? I downloaded the universal print driver from what I found; I sometimes get error messages when I print so I think that I don't have the correct driver. Help is appreciated. Thank you.

  There are a few printer HP LaserJet 4050 Series printers, and you can find the drivers for all the models here.
  
  I hope this helps!
  
  Edit: Wrong link. Try hereand here.

• Visa read - ADAM Advantech 4019

  Hello

  I have an old computer with LabView 8 that works perfectly with ADAM 4019 connected to COM1 (serial RS-232). The problem is I want to replace this with a new computer and when I run the stand-alone (including Setup) version the program works without any error messages, but it does not read anything the Com1 port. I can read the data by using the ADAM utility software.

  Can someone please help me find a way to solve this problem?

  Thank you

  Hoda

  You use VISA? Have you installed VISA on the new computer? What is the error code that you get?

  What is the waiting period?

  You can reach your vi (jpg or LV shape reading<= 2011,="">

• How to interface ADAM 4060 in Labview 7.0?

  I had difficulties in interfacing ADAM 4060 with Labview 7.0. I tested the device by using the utility software of Advantech ADAM and it works properly. So, its not the hardware error or failure.

  However, when I want the interface using Labview, I couldn't make it work. LabVIEW does not communicate with ADAM-4060. I try to use user libraries > Advantech DA & A > Advanve > SlowDIO > DioWritePortDword.vi, DioWritePortWord.vi, and also library standard srandard, COMWrite.vi

  http://docs.Google.com/View?docid=0Aak_OiJCAY8kZGd2dmpiMl80NmRxNmJrc2Y2&revision=_latest

  I use the right function? FYI, I'm newby of Labview.

  Can someone help me please? Thanks in avdance.

  a - kay

  Hi a - kay,

  Where did you find this instrument driver? I'm not on IDnet. What is the manufacturer? They may have more documentation?

  In the other thread, you will notice that it is simply a communication series. You may be able to write your own driver quite easily.

• Communication of ADAM

  Hey,.

  I'm looking to connect LabVIEW to an ADAM 4068. Are there suggestions in "examples to find" how to start even the code for this device.

  Thank you

  Damien

  If you want to spend the extra money for the DSC module and implement a HMI/SCADA system and communicate to the plc, etc., then go ahead and do it. Certainly, there is no need for a unique modbus device. If that were the case, I him wouldn't download the modbus library.

  And the reason why you cannot create the project, is that you don't have DSC.

• Pentecost Hige Mem AD LDS (ADAM) after some time of problems.

  Hi all!

  We have a prob in our company. The problem has todo Pentecost ADAM connect on our users of Pentecost 1200 + system.

  The server has 8 GB of ram and gets completely after some time witch pick up all the server. We have a solution, and that's to serve the AD LDS process 0 again.

  This is only a solution, but I want a solution to what seems to be a problem with leaks of mem because the server passes 100% of RAM...

  

  As you can se We´r using AD LDS--> external users (renamed Dsamain.exe) if its only elements of windows in use...

  help me fix this please, I'm gief you hamburgers or pie´s!

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• LaserJet 4050, low message "Toner".

  Hello

  After several years of printing, I finally had to replace the cartridge in my LaserJet 4050.  The new cartridge is a genuine HP, but after installing I can not print.

  The printer was purchased second hand and since I got it it has always displayed a low 'Toner' message in the dialogue of impression, BUT NEVER ON the PRINTER LED.

  The irony is that the old print cartridge is a compatible generic and replacement is a genuine HP.

  Any help appreciated.

  Kind regards

  Gary

  This is so embarrassing!  I found the seal on the new cartridge, removed it and everything works now.  Leave it on the forum just in case others have the same problem.

  Oh by the way, despite setting up a whole new cartridge HP, the print dialog still warns of low toner level.

• HP LaserJet 4050: Error printing on HP Laserjet 4050 and 4100 Windows R2 2012

  We have recently migrated our Windows Server 2003 environment to Windows Server R2 2012.  Some of our printers, specifically HP Laserjet 4050 and 4100 no longer work with Server R2 2012, even if we downloaded the drivers for Windows R2 2012 from the Internet HP site and made sure the printer was using the new driver from HP.  When you try to print from the server or terminal connection, we get a "printing error" in the status field in the queue.  We do not know what to do to get these printers to print.  We have several of them and redirect users to print to another printer which is further so they can print.

  Do you have any suggestions?

  Best regards

  Paul

  If you cannot print from the server, then on the server, the parameters must be incorrect.  You can even ping the printers on the server?  Since you have more than 1 printer with this problem I doubt that all the printers hp all wrong.  Something else in the way that you configure these printers must be the issue.  If you can ping and also access the web server, then I think you have problems with active directory.  If you can not ping so perhaps have changed the ip addresses or the road you take these ip address has changed.

• HP 4050: Printer HP 4050 range

  My HP 4050 worked fine until recently. Recently, it has begun to produce a sound grinding printing and a stop error light printing is turned on by requiring "attention". After opening and closing, it starts printing a few pages, then stops again, with the light of the error.  Anyone know what could be the problem?

  Gabe3

  Sounds to me like rolls of collection for the tray is worn because you do not get a jam, just a failure to move the paper.  There are 2 rolls, collection and separation, and both are the same.

• LaserJet 4050TN: 4050 duplexer

  I have a LaserJet 4050TN and I'm looking for a Duplexer for her.

  On the web, there are sites that show that the C4123A and C8054A work in the 4050.

  I know that the C8054A is used in the 4100 series.

  My question is the C8054A compatible backwards and work in the 4050TN?

  Thank you

  ---------------------------------------------------------

  I never tried that combination however HP accessories for similar models are often a backward compatibility, but almost never before compatible.

• Laser Jet 4050: BKMP1

  HP printer driver will allow me to print a file from my Windows 7-64 bit Dell XPS8900 Microsoft ' Word' computer desk for my HP LaserJet 4050 (serial No. [personal information deleted])?

  I would recommend from the pcl5 version HP Universal print driver.

• Driver printer HP LaserJet 4050 T problem

  I wonder if my cable is bad.  It is properly installed and connected correctly, but the computer and the printer are not communicating

  Printer drivers for the printer HP LaserJet 4050 T. says it is ready, but the jobs piling up and will not print. I was wondering if my cable is bad. It is properly installed and connected correctly, but the computer and the printer do not seem communicating__

  Try to uninstall/reinstall your printer.

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?lang=en&cc=us&prodNameId=18320&TaskID=135&prodTypeId=18972&prodSeriesId=25475&submit.y=4&submit.x=11&lang=en&cc=us

  The drivers are available at the link above.

  http://h20000.www2.HP.com/bizsupport/TechSupport/home.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesId=25475&submit.y=7&submit.x=6&lang=en&cc=us

  Go to the above link > 'See support and troubleshooting information' > key in your number of printer > there is the use of manuals there.

  For more information, contact HP:

  http://welcome.HP.com/country/us/en/contact_us.html

  See you soon.

  Mick Murphy - Microsoft partner