Adapter network missing after system restore...

Similar Questions

• File missing after system restore

  Dear Sir.
  Today, on a tecra M2, I did a system restore, but suddenly, the message came that I had to re - install the following file: \system32\ntoskrnl.exe :

  How can I do this: put in the recovery cd or just make a formatting the drive with the restore cd?
  Thanks in advance
  drweekx

  Hello

  System Restore is a very useful tool, but it is not the miracle solution! :-)

  Your "ntoskrnl.exe" file seems to be corrupted and this file is very important as you BONE!
  You can try to start Notepad, and then press the key "F8". This will take you to a menu and you can choose the 'last known good configuration"and the VGA Mode.

  If you are lucky your laptop work after that, otherwise you can only recover the portable whole! But if you have important data on the NB you safe to an external drive!

  Goodbye Chris

• DV6 - 6153cl drivers for biometric devices missing after system restore

  Hello

  I have a HP Pavilion dv6 - 6153cl Entertainment PC with Windows 7. I used the fingerprint reader, since I have my laptop. The scanner has stopped working.

  Background: two weeks ago, I downloaded the latest version of Norton 360 (Version 21.1.1.7), which caused my laptop to keep crashing every few hours. After much time consulting technical support, I did a system restore to a few days before the new version download then downloaded the version of Norton 360 and active. This solves the problem of crash.

  Problem: After restoring the system, my fingerprint reader no longer works. By control panel > all Control Panel items > biometric devices, "Windows do not have the biometric devices on this computer. You will need to attach your device or install device drivers. "Can someone tell me what are the correct drivers that I need and where to find them?

  Thanks for your help!

  Hello

  First of all, download and reinstall the driver Validity Sensor on the following link.

  http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55109.exe

  Once completed, restart the laptop.

  If it still not works, you may also need to reinstall HP SimplePass on the link below.

  http://ftp.HP.com/pub/SoftPaq/sp54501-55000/sp54680.exe

  Yet, when it has installed, restart the laptop.

  Kind regards

  DP - K

• Omni 10 5600us: Wireless driver missing after system restore

  After a complete restoration of the system, essentially restoring to factory settings and erase everything, the Tablet does not connect to the internet and does not list the wireless network device in Device Manager. Instead, there are 2 generic SDIO devices listed there with no known drivers. I can does not seem to find the driver online and don't want to have to pay for a pilot program restore this driver that should have never disappeared. Thanks for your help!

  James Phillips
  Senior technician
  LovingMyTech.com

  Thanks for your help everyone. I was actually able to solve this on my own. LovingMyTech.com

  The resolution is to use the device to pcidatabase.com id to identify the device. The aircraft was ID had like Broadcom Wireless 54bg. I have found that this camera in the list of drivers in Windows and it works fine now. Going to try to install the other device generic SDIO now identified as controller RAID ACARD AEC-6897/6898.

  Thanks again for all your help.

  To learn more about what I do... www.LovingMyTech.com

• wireless adapter network missing after reinstalling windows

  I am a newbie.i I reinstall my Presario CQ57 window 7 Home Premiun 32 bit and since these drivers are missing.please someone help me.

  Ethernet controller

  PCI\VEN_10EC & DEV_8136 & SUBSYS_3672103C & REV_05

  PCI\VEN_10EC & DEV_8136 & SUBSYS_3672103C

  PCI\VEN_10EC & DEV_8136 & CC_020000

  PCI\VEN_10EC & DEV_8136 & CC_0200

  Network controller

  PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C & REV_01

  PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C

  PCI\VEN_10EC & DEV_8176 & CC_028000

  PCI\VEN_10EC & DEV_8176 & CC_0280

  PCI device

  PCI\VEN_10EC & DEV_5209 & SUBSYS_520910EC & REV_01

  PCI\VEN_10EC & DEV_5209 & SUBSYS_520910EC

  PCI\VEN_10EC & DEV_5209 & CC_FF0000

  PCI\VEN_10EC & DEV_5209 & CC_FF00

  PCI Simple Communication controller

  PCI\VEN_8086 & DEV_1C3A & SUBSYS_3672103C & REV_04

  PCI\VEN_8086 & DEV_1C3A & SUBSYS_3672103C

  PCI\VEN_8086 & DEV_1C3A & CC_078000

  PCI\VEN_8086 & DEV_1C3A & CC_0780

  SM BUS controller

  PCI\VEN_8086 & DEV_1C22 & SUBSYS_3672103C & REV_04

  PCI\VEN_8086 & DEV_1C22 & SUBSYS_3672103C

  PCI\VEN_8086 & DEV_1C22 & CC_0C0500

  PCI\VEN_8086 & DEV_1C22 & CC_0C05

  Try:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-96646-1&cc=us&DLC=en&LC=en&OS=4063&product=5173039&sw_lang=

  Concerning

• NEED DRIVERS AFTER SYSTEM RESTORE

  HP Pavilion g6-2128tx Notebook PC 
  Serial number: 5CD2231LJF

  {Information}

  After system restore a bunch of drivers was missing, I managed to update some drivers but I need some I can't find. Help!

  Hardware ID

  Ethernet controller:

  PCI\VEN_10EC & DEV_8136 & SUBSYS_183E103C & REV_05

  BCM20702A0

  USB\VID_0A5C & PID_21E3 & REV_0112

  PCI device

  PCI\VEN_10EC & DEV_5229 & SUBSYS_183E103C & REV_01

  PCI Simple Communications controller

  PCI\VEN_8086 & DEV_1E3A & SUBSYS_183E103C & REV_04

  SM Bus controller

  PCI\VEN_8086 & DEV_1E22 & SUBSYS_183E103C & REV_04

  (USB) Universal Serial Bus controller

  PCI\VEN_8086 & DEV_1E31 & SUBSYS_183E103C & REV_04

  I run on Windows Ultimate-64-bit

  Help would be GREAT

  Hello

  Download and install the following.

  Chipset Driver - Windows 7.

  After this Setup is complete, restart the laptop.

  Realtek software LAN.

  Broadcom Bluetooth 4.0.

  Realtek card reader driver.

  Intel Management Engine Interface.

  Intel USB 3.0 Host Controller Driver.

  Kind regards

  DP - K

• Impossible to uninstall Symantec Endpoint Protection after system restore

  Hello
  a program has been uninstalled (Symantec Endpoint Protection)
  After have rebooted and still have problems to install a newer version, I decided to do a system
  Restore prematurely, I uninstalled the original version.
  (Since I couldn't find the installation files or my license info)

  The old version worked again.  Now I am able to start the
  new version, the old version will not uninstall.

  It just sits there in a small box with a bar saying Windows of progression
  in the configuration of Symantec Endpoint Protection and it remains as it
  for as long as I left, at least 25 minutes.

  I thought that the system restore would put things back exactly as they
  have been, but it's apparently not the case.

  OT: Impossible to uninstall after system restore

  Any ideas on that?
  The OS is Windows 7 Pro 64 bit 64-bit.
  I found this, but have not yet tried.
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/en-us

  I was able to cirumvent the problem by a selective startup in Msconfig.

  I disabled all startup items, all services not MS, restarted and then uninstalled

  successfully.  However, I met another strange problem.

  After uninstalling old version, I rebooted (the system was still selective

  startp) I put a new restore point and installed the new version successfully.

  Later, realizing msconfig has been arrived at "selective", I went and

  has tried to return to Normal startup.  However, when you select normal

  and hit 'apply', it immediately jumps to selective.  I have never seen it before.

  I didn't know how to solve.

  Instead, I uninstalled the new version of the AV program, jumped to the restore point

  I did before I installed, rebooted, open Msconfig and have been correctly set up

  In normal mode.  Then reinstalled the AV.

  Everything is OK now.

  You ever heard of this problem of msconfig before?

• Cannot connect to the network or perform system restore after installing updates have been

  WIN 7 Home Premium running on a gateway PC connected to the internet via an ethernet connection using a RealTek network adapter for the past 5 years with no problems. Running Avast Pro antivirus / internet security.  09/02/2016, Microsoft and Avast downloaded and installed updates on the PC.  After the PC auto-redémarré as part of the Microsoft updates, I couldn't connect to the internet.  Connect to the network now says unidentified network - no network connection.  The adapter looks like to she always sees the (watch 100 Mbps) connection, but no data packet move.  Device Manager indicates that the unit is working normally.

  I ran through the resolution of the problems of Windows network. I checked the cable was attached, reset the home modem, reset the adapter (toggle), uninstalled/reinstalled using the latest adapter driver available.  I have disabled the Windows Firewall because Firewall Avast wouldn't start.  I disabled all the Avast settings to see if it eliminated the problem.  I tried to run the system restore before the updates but continue to spread the message that there was an unexplained error and restore failed.  All this was done in Normal mode. I restarted mode safe and had the same problems without success.

  I was able to clear the problem by manually uninstalling updates of security Windows which were loaded on 09/02/2016 through the programs and features Control Panel. Then I did the repair of Avast program operation.  I rebooted the computer and the internet connection worked. Then I reinstalled manually updates Windows security on the Windows Update program.

• Missing files after system restore

  My computer crashed in what appeared to be a virus.  I did a system restore, but now I always have missing files.  I can find them if I search but I can't navigate to them.  Any ideas?

  Never mind.  The restored files were hidden... weird.

• Dell V313 does not print after system restore

  My apologies if I should have posted this elsewhere.

  I have a printer all-in-one Dell V313, using Windows 7, 64-bit. I really like the printer.

  I used the "remove IE11 update' to good use, and he continued to print well for about a month, until...

  My father ran a system restore point to solve another problem, and now I can print is no longer. DOH!

  I moved that pesky IE11 updated again, but this does not solve the problem.

  When I "Launch Dell printer at home", instead to open the main menu, a dialog box pop box, asking me if I want to open, save, or cancel the download to a temporary file named "DSX # .tmp", where # change every time.

  I opened it with notepad and this file seems to contain a rudimentary version of this main menu, but of course it is not interactive. (The home Dell printer menu is never responsible.)

  Another interesting note is that when I print something (does not seem to matter what program), the printer status area is not - what appears instead is a html file called jswdialog.html. This file is apparently empty.

  I made Java and run-time environment has been updated, just in case. I tried to remove all traces of the printer (by removing prints, queue, stop/print spooler, printer, uninstall drivers uninstall from compensation), and reinstall everything from scratch, right down to the firmware of the printer, but nothing will print when I ask him.

  Instead, it adds the work in file print, which then comes out after a reboot.

  The scanner function works of the printer itself, although this menu of the printer on the Dell home page will not start.

  Any suggestions? I must be missing something, but I don't know what. My last resort is to reinstall Windows, or reset whenever I want to print something, but I'd rather not.

  Thanks for reading,

  Matt

  Matt,

  Try these teak and see if it prints. If it's not I can guide you reinstall the printer, but printing or tasks that can be frozen in the queue will need to be removed or the problem would remain.

  Start, Control Panel, Manager of devices.

  Go to the section USB controller, and then click the plus sign +.

  Go to each USB hub root and right-click on it, on the left, click Properties, on the left, click power management. Uncheck the allow the computer to turn off this device to save power.

  Restart your computer.

  --------------------------------------

  Start, Control Panel, Manager of devices. Click Network and then right click on your wireless network adapter, on the left, click on properties, power management. Uncheck the allow the computer to turn off this device to save power.

  Rick

• No Internet connection after system restore

  I had problems to open Windows Live Messenger last night, and I tried to do a system restore, as I noticed there were a couple of updates that have been installed throughout the day where I suspected may have caused the problem.

  I went back to a restore point from the earlier in the day when I heard that Messenger was working. Of course, Messenger open instead of crashing on startup.

  Unfortunately, I am able to connect to the Internet. Network connections settings say it's "id" my wireless network, but nothing changes. Is no longer, I get an IP address. I have other computers on the network that connect without problem.

  I tried to install a Wireless N USB adapter and the problem still remains. Finally, I gave and did a complete restore to factory settings. Good news is that I can now get a connection. Fortunately, I had my backup files.

  Research online, it seems that many people seem to have had similar problems, but not after a system restore.

• lose the connection to the net after system restore

  I used the system restore and restart the pc after it but I lose the connection to net it gives zero transmission and recived it is a lock on the connection icon and when I try to use repair it gives the error message (windows could not finish repiring the problem because it is impossible to perform the folloing action not to conduct not query tcp/io of the canoe connection parameter)

  There is no problem with the connection that the net works with other PC not mine

  When first I used the net all the me I connect the Caron and its automatic execution

  so why it dosent run now the files make me lose the file how to fix

  When you did the system restore you have lost the connection to the network.

  Create a new connection

  Dale may

• Disk space HARD disappeared after system restore

  A day ago, I decided to free up space on the C: drive of my computer. By the time my drive was 10.4 GB of space. I deleted some old games and files, releasing much of the space and defragged my system gives me a total of 29.5 GB of space.

  Shortly after, I was forced to do a restore of the system on my computer to correct an error. To recheck my space on the drive, he came to 10.4 GB. Deleted programs have not returned and after a thorough check of the system.  I tried several other forums as to find an explanation for the missing space, but most of the answers in the forums does not solve the problem at all.

  What happened to the 19GB of space freed after deleting these files and old games?

  Hello

  Since you did a system restore, fragments of programs that have been installed on the system earlier were able to return. I suggest you follow the steps mentioned below.

  Step 1:

  Run Disk Cleanup on the system. See the article mentioned below.

  Description of the tool in Windows XP disk cleanup

  http://support.Microsoft.com/kb/310312

  Step 2:

  I suggest you to do a Disk Defragmenter. See the article mentioned below.

  How to defragment your disk Volumes in Windows XP

  http://support.Microsoft.com/kb/314848

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• BootMGR is missing and system restore hangs

  Hi my computer is having some major problems.i have an elite of HP Pavilion with windows vista (home I think?) 32-bit. I started this morning to find that he said 'impossible to start windows' and then I ran the unsuccessful startup repair. I ran system restore to try to solve the problem, but after he reformatted the hard drive, it bluescreened so now it's saying "BootMGR is Missing". my computer did not come with restore disks, so I borrowed one from a friend and he told me that there is no OS and it can't fix the Restorer of the system. Help, please

  Hello

  Looks like you may have a hardware problem

  and if the recovery process back to factory settings vista does not work, you will need to contact the computer manufacturer

  It's their recovery process not microsofts

  HP support

  http://welcome.HP.com/country/us/en/contact_us.html

  HP support forums

  http://h30434.www3.HP.com/

  read this and try this 1st

  You can't just borrow anybodys vista recovery disk

  manufacturer's recovery disks are the brand and the specific model

  for HP, press F11 at startup to start the recovery process

  or contact HP and ask them to send you in vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  or borrow a vista microsoft dvd

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

• Could not open the cloud creative app after system restore

  I tried to re-download creative cloud after having to perform a system restore and now since that time it says I can't open it because its is missing or broken. and tells me to re-download.

  so, when I try it. He said exactly the same thing.

  uninstall all cc including the application of cc office.

  clean your computer of files cc by http://www.adobe.com/support/contact/cscleanertool.html

  Restart your computer (do not skip this)

  Reinstall the cc desktop application, https://creative.adobe.com/products/creative-cloud

  Use the desktop application to install your programs and the cc events