File missing after system restore

Similar Questions

• DV6 - 6153cl drivers for biometric devices missing after system restore

  Hello

  I have a HP Pavilion dv6 - 6153cl Entertainment PC with Windows 7. I used the fingerprint reader, since I have my laptop. The scanner has stopped working.

  Background: two weeks ago, I downloaded the latest version of Norton 360 (Version 21.1.1.7), which caused my laptop to keep crashing every few hours. After much time consulting technical support, I did a system restore to a few days before the new version download then downloaded the version of Norton 360 and active. This solves the problem of crash.

  Problem: After restoring the system, my fingerprint reader no longer works. By control panel > all Control Panel items > biometric devices, "Windows do not have the biometric devices on this computer. You will need to attach your device or install device drivers. "Can someone tell me what are the correct drivers that I need and where to find them?

  Thanks for your help!

  Hello

  First of all, download and reinstall the driver Validity Sensor on the following link.

  http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55109.exe

  Once completed, restart the laptop.

  If it still not works, you may also need to reinstall HP SimplePass on the link below.

  http://ftp.HP.com/pub/SoftPaq/sp54501-55000/sp54680.exe

  Yet, when it has installed, restart the laptop.

  Kind regards

  DP - K

• Adapter network missing after system restore...

  I recently restored my old XP due to a massive system failure system. Restoring a drive hard new, reformatted, is well spent, except that now I can't connect to the internet. Diagnosis of the error indicates miss me my "network adapter".

  It seems to me that this should have been on one of the restore CD I got with my computer, but I have gone through each of them and can't find anything else to restore. Since then, I cannot connect to the internet, is there another way to get a network adapter? And how do I know if I have the right?

   

  
  

  Thank you, haaruun. It turns out that there was another restore disc I had trouble loading and had set aside. I went back to it and was able to find a folder named 'PILOT' on this subject and has moved to my system and that did the trick.

  Thanks for your reply, if. I appreciate it.

• Omni 10 5600us: Wireless driver missing after system restore

  After a complete restoration of the system, essentially restoring to factory settings and erase everything, the Tablet does not connect to the internet and does not list the wireless network device in Device Manager. Instead, there are 2 generic SDIO devices listed there with no known drivers. I can does not seem to find the driver online and don't want to have to pay for a pilot program restore this driver that should have never disappeared. Thanks for your help!

  James Phillips
  Senior technician
  LovingMyTech.com

  Thanks for your help everyone. I was actually able to solve this on my own. LovingMyTech.com

  The resolution is to use the device to pcidatabase.com id to identify the device. The aircraft was ID had like Broadcom Wireless 54bg. I have found that this camera in the list of drivers in Windows and it works fine now. Going to try to install the other device generic SDIO now identified as controller RAID ACARD AEC-6897/6898.

  Thanks again for all your help.

  To learn more about what I do... www.LovingMyTech.com

• NEED DRIVERS AFTER SYSTEM RESTORE

  HP Pavilion g6-2128tx Notebook PC 
  Serial number: 5CD2231LJF

  {Information}

  After system restore a bunch of drivers was missing, I managed to update some drivers but I need some I can't find. Help!

  Hardware ID

  Ethernet controller:

  PCI\VEN_10EC & DEV_8136 & SUBSYS_183E103C & REV_05

  BCM20702A0

  USB\VID_0A5C & PID_21E3 & REV_0112

  PCI device

  PCI\VEN_10EC & DEV_5229 & SUBSYS_183E103C & REV_01

  PCI Simple Communications controller

  PCI\VEN_8086 & DEV_1E3A & SUBSYS_183E103C & REV_04

  SM Bus controller

  PCI\VEN_8086 & DEV_1E22 & SUBSYS_183E103C & REV_04

  (USB) Universal Serial Bus controller

  PCI\VEN_8086 & DEV_1E31 & SUBSYS_183E103C & REV_04

  I run on Windows Ultimate-64-bit

  Help would be GREAT

  Hello

  Download and install the following.

  Chipset Driver - Windows 7.

  After this Setup is complete, restart the laptop.

  Realtek software LAN.

  Broadcom Bluetooth 4.0.

  Realtek card reader driver.

  Intel Management Engine Interface.

  Intel USB 3.0 Host Controller Driver.

  Kind regards

  DP - K

• Impossible to uninstall Symantec Endpoint Protection after system restore

  Hello
  a program has been uninstalled (Symantec Endpoint Protection)
  After have rebooted and still have problems to install a newer version, I decided to do a system
  Restore prematurely, I uninstalled the original version.
  (Since I couldn't find the installation files or my license info)

  The old version worked again.  Now I am able to start the
  new version, the old version will not uninstall.

  It just sits there in a small box with a bar saying Windows of progression
  in the configuration of Symantec Endpoint Protection and it remains as it
  for as long as I left, at least 25 minutes.

  I thought that the system restore would put things back exactly as they
  have been, but it's apparently not the case.

  OT: Impossible to uninstall after system restore

  Any ideas on that?
  The OS is Windows 7 Pro 64 bit 64-bit.
  I found this, but have not yet tried.
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/en-us

  I was able to cirumvent the problem by a selective startup in Msconfig.

  I disabled all startup items, all services not MS, restarted and then uninstalled

  successfully.  However, I met another strange problem.

  After uninstalling old version, I rebooted (the system was still selective

  startp) I put a new restore point and installed the new version successfully.

  Later, realizing msconfig has been arrived at "selective", I went and

  has tried to return to Normal startup.  However, when you select normal

  and hit 'apply', it immediately jumps to selective.  I have never seen it before.

  I didn't know how to solve.

  Instead, I uninstalled the new version of the AV program, jumped to the restore point

  I did before I installed, rebooted, open Msconfig and have been correctly set up

  In normal mode.  Then reinstalled the AV.

  Everything is OK now.

  You ever heard of this problem of msconfig before?

• Missing files after system restore

  My computer crashed in what appeared to be a virus.  I did a system restore, but now I always have missing files.  I can find them if I search but I can't navigate to them.  Any ideas?

  Never mind.  The restored files were hidden... weird.

• How to save important files a files on a dvd before doing a restore of the entire system with factory.so disk I am able to reinstall computer after system restore.

  I need to do a restore of the entire system with disc received from factory.but that I have personal files and folders that I need keep.such as banking, contacts, photos, ect. ect. How do I put them on a dvd a restore then their return after the full system restore

  Hello

  If the system still boot and CD/DVD Burns just put in a DVD-R (write once) or DVD - RW (burn
  several times)-it will encourage - when its ready use Windows Explorer to drag and drop files (and
  their content) on the DVD. When you're ready, click BURN. I would like to make a couple of each DVD for
  Security with redundancy. These will not be encrypted and you can access the files out of them or
  subsequently copy on a hard drive.

  Basically, make sure you know what you want to copy the files and put them in a blank DVD to write.

  ---------------------

  If the system does not start, then you will need to put the drive in another computer or in a
  External enclosure USB so you can copy files to removable media.

  ---------------------

  Burn a CD or DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/b47eb51a-ea6d-4d97-97b0-2d07a59316981033.mspx

  How to burn a CD with Vista
  http://ITsVISTA.com/2006/12/ITsVISTA-Tip-10-how-to-burn-a-CD-with-Vista/

  Burn a CD or DVD in Windows Vista
  http://maximumpcguides.com/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Vista/

  Microsoft video - how to burn CD/DVD
  http://www.YouTube.com/watch?v=0BwF60m05m8

  Excellent Forum for help with programs and CD/DVD problems
  http://Club.cdfreaks.com/

  Burn a CD or DVD in Windows Media Player
  http://windowshelp.Microsoft.com/Windows/en-us/help/30ffa641-B682-4315-8c7e-8a29f383a7131033.mspx
  Burn a CD or DVD in Windows Media Player: frequently asked questions
  http://windowshelp.Microsoft.com/Windows/en-us/help/51a88740-Abda-4144-9176-cec79cca31e81033.mspx

  Burn a CD or DVD in Windows Media Center
  http://windowshelp.Microsoft.com/Windows/en-us/help/9ee6cb78-bd7e-4DE3-A154-82d40c4289e01033.mspx

  Burn a CD or DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/b47eb51a-ea6d-4d97-97b0-2d07a59316981033.mspx
  How to burn an Audio CD - see also related Articles
  http://www.vista4beginners.com/how-to-burn-an-audio-CD
  Burn a CD or DVD using Windows Vista - a video
  http://www.YouTube.com/watch?v=0BwF60m05m8

  Disc burning: frequently asked questions
  http://windowshelp.Microsoft.com/Windows/en-us/help/2fa35b0d-B280-4589-9805-55e753888f5c1033.mspx

  Should which CD or DVD format I use?
  http://windowshelp.Microsoft.com/Windows/en-us/help/2af64e60-60AA-4d79-AB6C-3a5db5806cbe1033.mspx

  Windows Media Player playlist: frequently asked questions
  http://windowshelp.Microsoft.com/Windows/en-us/help/4bf0d986-a1cb-40d2-94de-85dba30a83831033.mspx

  Get the most out of WMP11http://windowshelp.microsoft.com/Windows/en-US/mediaplayer11/default.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Hidden after system restore files

  recently taken food out of a date. I had a "system check" trojan virus, so took a day before the virus has occurred. When I restore my music, photo folder files, documents, etc. are 'hidden' the reason why I say hidden is because when I right click-> properties it still shows I have more than 1 GB in this specific case, but it does not appear. Any help! ??

  Hello

  Here's a possible solution that I gave to a few different posters in these Forums with a problem similar to yours:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/Vista-system-restore-issue/6bd382b5-8f3d-48fa-9ABC-3792f53db945

  You may also still have some malware installed.

  Read the information on the link provided (Section 19 and 21) on the way to "unmask" data and Start Menu as a few skins of Malware.

  http://www.bleepingcomputer.com/virus-removal/remove-Windows-Vista-recovery

  While you're there, it would be a good idea to follow in their footsteps of malware removal to ensure that your system is clean.

  This is a very good general Malware cleaning page there.

  See you soon.

• Disk space HARD disappeared after system restore

  A day ago, I decided to free up space on the C: drive of my computer. By the time my drive was 10.4 GB of space. I deleted some old games and files, releasing much of the space and defragged my system gives me a total of 29.5 GB of space.

  Shortly after, I was forced to do a restore of the system on my computer to correct an error. To recheck my space on the drive, he came to 10.4 GB. Deleted programs have not returned and after a thorough check of the system.  I tried several other forums as to find an explanation for the missing space, but most of the answers in the forums does not solve the problem at all.

  What happened to the 19GB of space freed after deleting these files and old games?

  Hello

  Since you did a system restore, fragments of programs that have been installed on the system earlier were able to return. I suggest you follow the steps mentioned below.

  Step 1:

  Run Disk Cleanup on the system. See the article mentioned below.

  Description of the tool in Windows XP disk cleanup

  http://support.Microsoft.com/kb/310312

  Step 2:

  I suggest you to do a Disk Defragmenter. See the article mentioned below.

  How to defragment your disk Volumes in Windows XP

  http://support.Microsoft.com/kb/314848

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Dell V313 does not print after system restore

  My apologies if I should have posted this elsewhere.

  I have a printer all-in-one Dell V313, using Windows 7, 64-bit. I really like the printer.

  I used the "remove IE11 update' to good use, and he continued to print well for about a month, until...

  My father ran a system restore point to solve another problem, and now I can print is no longer. DOH!

  I moved that pesky IE11 updated again, but this does not solve the problem.

  When I "Launch Dell printer at home", instead to open the main menu, a dialog box pop box, asking me if I want to open, save, or cancel the download to a temporary file named "DSX # .tmp", where # change every time.

  I opened it with notepad and this file seems to contain a rudimentary version of this main menu, but of course it is not interactive. (The home Dell printer menu is never responsible.)

  Another interesting note is that when I print something (does not seem to matter what program), the printer status area is not - what appears instead is a html file called jswdialog.html. This file is apparently empty.

  I made Java and run-time environment has been updated, just in case. I tried to remove all traces of the printer (by removing prints, queue, stop/print spooler, printer, uninstall drivers uninstall from compensation), and reinstall everything from scratch, right down to the firmware of the printer, but nothing will print when I ask him.

  Instead, it adds the work in file print, which then comes out after a reboot.

  The scanner function works of the printer itself, although this menu of the printer on the Dell home page will not start.

  Any suggestions? I must be missing something, but I don't know what. My last resort is to reinstall Windows, or reset whenever I want to print something, but I'd rather not.

  Thanks for reading,

  Matt

  Matt,

  Try these teak and see if it prints. If it's not I can guide you reinstall the printer, but printing or tasks that can be frozen in the queue will need to be removed or the problem would remain.

  Start, Control Panel, Manager of devices.

  Go to the section USB controller, and then click the plus sign +.

  Go to each USB hub root and right-click on it, on the left, click Properties, on the left, click power management. Uncheck the allow the computer to turn off this device to save power.

  Restart your computer.

  --------------------------------------

  Start, Control Panel, Manager of devices. Click Network and then right click on your wireless network adapter, on the left, click on properties, power management. Uncheck the allow the computer to turn off this device to save power.

  Rick

• Could not open the cloud creative app after system restore

  I tried to re-download creative cloud after having to perform a system restore and now since that time it says I can't open it because its is missing or broken. and tells me to re-download.

  so, when I try it. He said exactly the same thing.

  uninstall all cc including the application of cc office.

  clean your computer of files cc by http://www.adobe.com/support/contact/cscleanertool.html

  Restart your computer (do not skip this)

  Reinstall the cc desktop application, https://creative.adobe.com/products/creative-cloud

  Use the desktop application to install your programs and the cc events

• Re-installation of Captivate 6 trial after system restore

  Hi all

  I installed the trial 6 Captivate (on Captivate 5.5) Friday last with 0 problems. This weekend I had major issues with my video card driver after changing my resolution and scaling in the Catalyst Control Center. After the restoration of the system - which has again last Wednesday - I was able to update all who need them. When I tried to re - install the trial of Captivate 6, I was able to get all the way to the installation window during initialization. The green bar filled to the top (toward the end it got really slow) and once it has been filled, the window disappeared and nothing else happened after that. I tried to delete the files I had and re - download. I made sure that my Flash Player has been updated (it wasn't) and tried again. Same question. I have restarted my computer several times. That did not help. He arrived at that same place every time and it goes no further. Does anyone have an idea why this is happening?

  I spent almost all day in the cat / the phone of an Adobe engineer who literally could not help me. I thought maybe I could find a Captivate 6 file sitting in my registry, but I didn't know (I checked Adobe files). It is not installed, so I can't go to uninstall it, I looked in the control panel. I'm a little confused. I guess that critical a file either has been corrupted during the restoration OR a critical file is missing during the restoration, but I'm not tech savvy enough to know what to look for or where I should be looking for it.

  Thanks for any help you can give,

  Obsidiangel1982

  Hello

  Welcome to the forums.

  Can you please try this step and see if that fixes the problem. Just go to this place and rename the OOBE old_OOBE folder.

  C:\Program Files (x 86) \Common Files\Adobe

  and the launch of the installer once more, hope this helps.

  Thank you

  Priyank

• Satellite A500-1CO - loss of data after system restore

  Hi all, because the system was slow I decided to restore the system using the DVD of restoration system (1,2). The problem is that I have not saved anything from drive D, and after the restore, all files have been deleted. My logic was unaware that the restoration apply to drive C (system disk) and let the D drive as it is, but I was so wrong.

  Is there a way to recover all or part of the lost data?

  Please help me. Thank you.

  Hi mate

  Unfortunately, I think that there is not much to do now.
  Recovery DVD redefines the laptop to factory settings and, therefore, this disc format the whole HARD disk and also all the partitions and, therefore, you will lose all data if you n t backup this before starting this procedure.

  You should read the user manual or information before starting the recovery. :(

• Cannot open any file, start the system restore or use my original XP pro CD

  original title: no CAN NOT OPEN ALL the FILES ON MY OS, I can't START the SYSTEM RESTORE, I can't EVEN USE MY XP PROFESSIONAL ORIGINAL CD... HELP PLEASE!

  I HAVE A DELL INSPIRON / B130 LAPTOP WITH XP PROFESSIONAL OPERATING SYSTEM.  I GOT HOME THE OTHER DAY TO FIND MY ROOMMATE ON MY LAPTOP, AFTER THE LECTURES OF THE PERSON TO KEEP YOUR HANDS OFF. I OPENS AND DISCOVERS WHAT HAS HAPPENED. THE PERSON DOWNLOAD FREE DOWNLOADERS VIDEO 4 X, AS WELL AS FILMS AND OTHER JUNK ON MY COMPUTER... ETC I WENT TOO ADD REMOVE PROGRAMS AND DELETED PROGRAMS THAT KEPT DUPLICATE ITSELF. I SHUT DOWN MY COMPUTER, TO THE REBOOT. NOW I GET THESE MESSAGES... "WINDOWS CANNOT OPEN THIS FILE", EXE, FILES,. INK AND WELL BASICALLY ALL THE FILES FILES. I CAN'T OPEN THE SYSTEM RESTORE, ENTER ADMINISTRATOR, I CAN'T EVEN USE MY WINDOWS XP PROFESSIONAL CD ORINGINAL, IT SAYS: ERROR. 3514 LINE, I DON'T KNOW WHAT ELSE TOO CAN YOU PLEASE HELP ME? Thank you

  Hi Colleen,

  Please take a look at the following suggestions for a possible solution:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/cannot-open-any-exe-files-cant-open-any-programs/85545ac1-3822-47AA-b664-e4209c62e9be