NEED DRIVERS AFTER SYSTEM RESTORE
HP Pavilion g6-2128tx Notebook PC
Serial number: 5CD2231LJF
{Information}
After system restore a bunch of drivers was missing, I managed to update some drivers but I need some I can't find. Help!
Hardware ID
Ethernet controller:
PCI\VEN_10EC & DEV_8136 & SUBSYS_183E103C & REV_05
BCM20702A0
USB\VID_0A5C & PID_21E3 & REV_0112
PCI device
PCI\VEN_10EC & DEV_5229 & SUBSYS_183E103C & REV_01
PCI Simple Communications controller
PCI\VEN_8086 & DEV_1E3A & SUBSYS_183E103C & REV_04
SM Bus controller
PCI\VEN_8086 & DEV_1E22 & SUBSYS_183E103C & REV_04
(USB) Universal Serial Bus controller
PCI\VEN_8086 & DEV_1E31 & SUBSYS_183E103C & REV_04
I run on Windows Ultimate-64-bit
Help would be GREAT
Hello
Download and install the following.
After this Setup is complete, restart the laptop.
Intel Management Engine Interface.
Intel USB 3.0 Host Controller Driver.
Kind regards
DP - K
Tags: Notebooks
Similar Questions
-
Action Center does not detect Avast Anti-virus after system restore
I had to do a system restore to a point a few days earlier due to some bad drivers. After you get things restored, I found that the Action Center are most recognized Avast (free version) as my anti-virus software. It is fully updated and running and work very well. I tried several suggestions available online, including suggestions on the avast website to check the consistency of the standard WMI (https://support.avast.com/index.php?_m=knowledgebase&_a=viewarticle&kbarticleid=580&nav=0, 1.20). I also checked that there isn't an underlying virus and tried to 'fix' the installation of Avast in the menu programs and features, as well as a few reboots. Nothing has worked. This PC is only about two weeks, and everything worked well until the bad drivers and system restore.
I came here as a last resort... Any help is appreciated.
Don't know if this will work for you, but last night I ran a scan with Avast and this morning that action Center of the window said Avast was running but according to Avast started it was running. Then I disabled the Avast shields then turned on their return and Action Center were more like Avast is not running
-
Impossible to uninstall Symantec Endpoint Protection after system restore
Hello
a program has been uninstalled (Symantec Endpoint Protection)
After have rebooted and still have problems to install a newer version, I decided to do a system
Restore prematurely, I uninstalled the original version.
(Since I couldn't find the installation files or my license info)The old version worked again. Now I am able to start the
new version, the old version will not uninstall.It just sits there in a small box with a bar saying Windows of progression
in the configuration of Symantec Endpoint Protection and it remains as it
for as long as I left, at least 25 minutes.I thought that the system restore would put things back exactly as they
have been, but it's apparently not the case.OT: Impossible to uninstall after system restore
Any ideas on that?
The OS is Windows 7 Pro 64 bit 64-bit.
I found this, but have not yet tried.
http://support.Microsoft.com/mats/Program_Install_and_Uninstall/en-usI was able to cirumvent the problem by a selective startup in Msconfig.
I disabled all startup items, all services not MS, restarted and then uninstalled
successfully. However, I met another strange problem.
After uninstalling old version, I rebooted (the system was still selective
startp) I put a new restore point and installed the new version successfully.
Later, realizing msconfig has been arrived at "selective", I went and
has tried to return to Normal startup. However, when you select normal
and hit 'apply', it immediately jumps to selective. I have never seen it before.
I didn't know how to solve.
Instead, I uninstalled the new version of the AV program, jumped to the restore point
I did before I installed, rebooted, open Msconfig and have been correctly set up
In normal mode. Then reinstalled the AV.
Everything is OK now.
You ever heard of this problem of msconfig before?
-
DV6 - 6153cl drivers for biometric devices missing after system restore
Hello
I have a HP Pavilion dv6 - 6153cl Entertainment PC with Windows 7. I used the fingerprint reader, since I have my laptop. The scanner has stopped working.
Background: two weeks ago, I downloaded the latest version of Norton 360 (Version 21.1.1.7), which caused my laptop to keep crashing every few hours. After much time consulting technical support, I did a system restore to a few days before the new version download then downloaded the version of Norton 360 and active. This solves the problem of crash.
Problem: After restoring the system, my fingerprint reader no longer works. By control panel > all Control Panel items > biometric devices, "Windows do not have the biometric devices on this computer. You will need to attach your device or install device drivers. "Can someone tell me what are the correct drivers that I need and where to find them?
Thanks for your help!
Hello
First of all, download and reinstall the driver Validity Sensor on the following link.
http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55109.exe
Once completed, restart the laptop.
If it still not works, you may also need to reinstall HP SimplePass on the link below.
http://ftp.HP.com/pub/SoftPaq/sp54501-55000/sp54680.exe
Yet, when it has installed, restart the laptop.
Kind regards
DP - K
-
Need to do system restore after you perform the most critical updates
Since getting internet cable in January, and the creation of a network, I couldn't install more updates to Vista security on my laptop Dell for 5 years. Every time I have download and install, the next time I start my PC, repair Windows startup program is displayed because Windows cannot start. The only solution never finds it is to do a system restore, which of course gets rid of all the updates of security that I just installed. An exception to this rule are the updates with a tool to remove malicious stuff. Those who work. And my works of Bit Defender. But I'm heading out for big trouble not being able to do all the other critical updates? What do you think is the problem?
What type of Internet connection you are on, wired or wireless? If you are on a wireless connection, try to switch to a wired connection and try the download with Internet Explorer.
I suggest you to install the updates one by one and...
See this response archived from a previous thread:
http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/9b7aafc2-5e3c-4d2D-BC01-4b81d319922a >
NOTE: any changes you make now will NOT affect updates already in the queue of the installation. For which is concerned about the automatic updates, you have already approved these updates.
UTC/GMT is 07:30 on Tuesday, may 1, 2012
-
Cannot run some programs after system restore to remove the virus
Hello
Toshiba my duaghter had a nasty virus that pretends to be an antivirus software product, which sneaked in, between the time his default service Norton has expired and I had the time to install Trend.
Can not remove it using trend, so on the advice of a friend, decided to make a windows system restore to a point before the infection. It worked successfully and the virus has disappeared, but now she can't run some programs, I tried to reinstall Trend, but fails because he says you must first uninstall Norton. But I can't run Norton, or uninstall, and certain folders on C: are no longer accessible.
I have to do a full restore of the Toshiba System (IE back tofactory settings? This seems a drastic measure, but the issue is beyond my meager knowledge of PC.
Thank you
Graeme
Hey Buddy,
Hmm... This announcement is a bit confusing... Maybe the programs you want to say were installed after the system restore point, who knows?
In my opinion you must reset the laptop configuration that you have already written. This will restore the pre-installed Windows version where everything is working correctly and that all the drivers and tools are installed.
Therefore, you only need the Toshiba Recovery disk and boot from it. This will restore the factory settings.
Check this box!
-
Windows Vista - what should I do after system restored?
My home edition vista recently will not start. After I turned it on, it loads for a while and stops automatically. I tried pressing some buttons for example F2, F8, F10 function for repair and recovery, and it is able to load the previously saved startup page. After that I turned it off, it cannot start again. I tried twice on the recovery of reparation and restored successfully, but now the repair and recovery seems no longer works.
(1) what should I do if I managed to open the start page?
(2) what could be the cause of it? In any case to restore so that it will work like new?
Hello
See if that helps you.
Startup Repair options.
Do a Safe Mode system restore to before the problem started.
http://bertk.MVPs.org/html/restoresysv.html
How to access Safe Mode
http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
If it doesn't, try a startup repair and / or a system restore using a DVD of Vista from Microsoft
Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.
Here is the guide to repair Options using a Vista DVD from Microsoft.
If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.
http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/
Table of contents
- Overview of Windows Vista repair options
- How to perform an automatic repair of Windows Vista using Startup Repair
- Advanced Tools Overview
- Conclusion
If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.
Unfortunately, you have to buy it.
Here is a link to it:
http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
Reinstall options.
You can contact your computer manufacturer and ask them to send you a set of recovery disks.
They should do this for a small fee.
To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:
You need to change the Boot order to make the DVD/CD drive 1st in the boot order:
How to change the Boot order in BIOS:
http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm
"How to replace Microsoft software or hardware, order service packs and replace product manuals.
http://support.Microsoft.com/kb/326246
___________________________________
And if you have never received a recovery disk when you bought your computer, there should be a recovery on the drive Partition hard reinstall Windows how much you bought your computer.
The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)
Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.
Them or us ask the right sequence of key.
___________________________________
Some manufacturers have more available Vista recovery disks.
If this happens, you may need to try this instead:
You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.
Other manufacturers recovery DVDs are should not be used for this purpose.
And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs
Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:
"How to do a clean install and configure with a full Version of Vista '
http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html
And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.
And phone Activation may be necessary when you use the above installation method.
"How to activate Vista normally and by Activation of the phone '
http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html
See you soon.
-
Dell V313 does not print after system restore
My apologies if I should have posted this elsewhere.
I have a printer all-in-one Dell V313, using Windows 7, 64-bit. I really like the printer.
I used the "remove IE11 update' to good use, and he continued to print well for about a month, until...
My father ran a system restore point to solve another problem, and now I can print is no longer. DOH!
I moved that pesky IE11 updated again, but this does not solve the problem.
When I "Launch Dell printer at home", instead to open the main menu, a dialog box pop box, asking me if I want to open, save, or cancel the download to a temporary file named "DSX # .tmp", where # change every time.
I opened it with notepad and this file seems to contain a rudimentary version of this main menu, but of course it is not interactive. (The home Dell printer menu is never responsible.)
Another interesting note is that when I print something (does not seem to matter what program), the printer status area is not - what appears instead is a html file called jswdialog.html. This file is apparently empty.
I made Java and run-time environment has been updated, just in case. I tried to remove all traces of the printer (by removing prints, queue, stop/print spooler, printer, uninstall drivers uninstall from compensation), and reinstall everything from scratch, right down to the firmware of the printer, but nothing will print when I ask him.
Instead, it adds the work in file print, which then comes out after a reboot.
The scanner function works of the printer itself, although this menu of the printer on the Dell home page will not start.
Any suggestions? I must be missing something, but I don't know what. My last resort is to reinstall Windows, or reset whenever I want to print something, but I'd rather not.
Thanks for reading,
Matt
Matt,
Try these teak and see if it prints. If it's not I can guide you reinstall the printer, but printing or tasks that can be frozen in the queue will need to be removed or the problem would remain.
Start, Control Panel, Manager of devices.
Go to the section USB controller, and then click the plus sign +.
Go to each USB hub root and right-click on it, on the left, click Properties, on the left, click power management. Uncheck the allow the computer to turn off this device to save power.
Restart your computer.
--------------------------------------
Start, Control Panel, Manager of devices. Click Network and then right click on your wireless network adapter, on the left, click on properties, power management. Uncheck the allow the computer to turn off this device to save power.
Rick
-
Equium L10-142: no sound after system restore
Hi there I got a Toshiba Equium laptop since May / June ' 05 (the model on the bottom is EL10-142, so I guess that its a L10?) Never had a problem with it until it completely crashed at Christmas. A friend who is a computer enthusiast has got completely restored back to factory settings by using his Toshiba A60 Back Up Disk (the software provided with it is not found) and downloading the drivers from the Web from Toshiba site.
Now, he works very well except one thing. There is no sound.
I tried all suggestions from the Microsoft Assistant help regarding no sound, ensuring that the FN Esc key had not accidentally pressed, the Volume Module in the control panel was all upturned and not cut, ANY - but to no avail.
There are a few drivers who must always be installed (did not really a clue where to get them going on the site of Toshiba does not give me and his work and do everything I need OK so Im not bothered) so I though maybe that was the problem, but oddly when I went into the thing of drivers Diagnostics He said that the Realtek AC97 driver has been installed and working properly.
Help!
I don't see what there is to do to fix this and it was definatley caused by thte system restore, as his was not a problem before the great crash.
Any advice you have would be greatly appreciated.
Thank you
E.
Wait a minute; you said that your friend used the recovery CD Toshiba for the A60 Equium L10on!
I m not surprised that noise does not appear. You cannot use a form of another laptop recovery CD!If you haven t the recovery CD right you need to order or you will install the operating system from the Microsoft Windows CD and then you download the drivers from the Toshiba driver page:
http://EU.computers.Toshiba-Europe.com/->-> support-> support homepage & Downloads Download drivers -
Update and Service Pack installation after system restore
Hello
I am a Customer Service representative your question for Windows XP. Here's the issue: System Restore will be restoring all the Service Packs and updates installed Windows XP on a Windows XP computer or at - it need to reinstall everything after the system restore?
Please enlighten us on this issue.
Thank you.
a factory restore is not identical to a windows system restore.
While a restore of windows re - interrupts the previous versions of the system and program files
a factory restore is the original state of the computer at the same time that he has left the factory.
so a factory restore will wipe the hard drive and then re-install all software provided with the computer original.
to this end, if a faulty the system restore windows to make the system functional again, then the restoration of the factory is the ultimate option to make the system work again.
the only way to solve a software problem is sometimes with the method above. However, the method above can not solve the problem below.
in return is that a windows system restore or a factory restore can overcome problems related to defective hardware.
in any case, keep in mind that, before executing a factory restore, the user must copy their personal files and email boxes and internet Favorites before performing this procedure.
-
Recently I did a system restore, after that my computer has crashed and everything seems to be OK except for the lack of noise coming from my speakers. This isn't an uncommon problem because I found a bunch of stuff on Google, but nothing I tried worked for me and I'm frustrated. I tried to uninstall the device from Device Manager, but even if I have it and restart the computer, he manages to resettle in any case, and yet I still have no sound. Everything seems OK despite these problems. I tried to download the latest drivers and their installation without success. Update the drivers does not work either. So, I wonder if someone can help, and if you manage to get through this, I'll save a song as a tribute for you 30 seconds. Yes I know. I'm quite desperate.
This may be of some use for you guys:
Value of the property
Device ID HDAUDIO\FUNC_01VEN_10ECDEV_0888SUBSYS_10192111REV_1000\41AF0929E00301
Status 0x0180200a started
Blocking problem 0 x 00000000 (0)
Service IntcAzAudAddService
Blocking capabilities 0 x 00000000
Config flags 0x00000000
Class MEDIA
Manufacturer Realtek
Hardware ID HDAUDIO\FUNC_01VEN_10ECDEV_0888SUBSYS_10192111REV_1000
HDAUDIO\FUNC_01VEN_10ECDEV_0888SUBSYS_10192111
Compatible IDs HDAUDIO\FUNC_01VEN_10ECDEV_0888REV_1000
HDAUDIO\FUNC_01VEN_10ECDEV_0888
HDAUDIO\FUNC_01VEN_10EC
HDAUDIO\FUNC_01
Class GUID {4D36E96C-E325-11CE-BFC1-08002BE10318}
Location internal High Definition Audio Bus
Bus number 0x00000000
Name of the enumerator HDAUDIO
Description Realtek High Definition Audio
Driver {4D36E96C-E325-11CE-BFC1-08002BE10318} \0005
Name of the object physics \Device\000000a2
Number of UI 0x0000ffff
BusType GUID {41203534-2037-3144-2042-422044362041}
Former bus type 0x00000005
Type of device 0x0000001d
Installation state 0 x 00000000
The device address 0 x 00000301Oem2.inf of device Configuration file
CoInstallers32 RtkCoInstXP.dll, RtkCoInstaller
AssociatedFilters Wdmaud, swmidi, redbook
Pilot RtkHDAud.sys
InfPath oem2.inf
InfSection IntcAzAudModel
InfSectionExt. NTx86
ProviderName Realtek Semiconductor Corp.
DriverDateData 00 40 18 67 CA 01 E7 D7
DriverDate 17/11/2009
DriverVersion 5.10.0.5983
MatchingDeviceId hdaudio\func_01ven_10ecdev_0888
DriverDesc Realtek High Definition Audio
SetupPreferredAudioDevicesCount oneClass MEDIA
Audio, video, and game controllers
Installer32 MmSys.Cpl, MediaClassInstaller
MmSys.Cpl, MediaPropPageProvider EnumPropPages32
Troubleshooting-0 hcp://help/tshoot/tssound.htm
Icon 3004Thank you!
You can try to contact support from Realtek:
http://www.Realtek.com.tw/contact/
Also, try to run this fixit:
-
I need to do a restore of the entire system with disc received from factory.but that I have personal files and folders that I need keep.such as banking, contacts, photos, ect. ect. How do I put them on a dvd a restore then their return after the full system restore
Hello
If the system still boot and CD/DVD Burns just put in a DVD-R (write once) or DVD - RW (burn
several times)-it will encourage - when its ready use Windows Explorer to drag and drop files (and
their content) on the DVD. When you're ready, click BURN. I would like to make a couple of each DVD for
Security with redundancy. These will not be encrypted and you can access the files out of them or
subsequently copy on a hard drive.Basically, make sure you know what you want to copy the files and put them in a blank DVD to write.
---------------------
If the system does not start, then you will need to put the drive in another computer or in a
External enclosure USB so you can copy files to removable media.---------------------
Burn a CD or DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/b47eb51a-ea6d-4d97-97b0-2d07a59316981033.mspxHow to burn a CD with Vista
http://ITsVISTA.com/2006/12/ITsVISTA-Tip-10-how-to-burn-a-CD-with-Vista/Burn a CD or DVD in Windows Vista
http://maximumpcguides.com/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Vista/Microsoft video - how to burn CD/DVD
http://www.YouTube.com/watch?v=0BwF60m05m8Excellent Forum for help with programs and CD/DVD problems
http://Club.cdfreaks.com/Burn a CD or DVD in Windows Media Player
http://windowshelp.Microsoft.com/Windows/en-us/help/30ffa641-B682-4315-8c7e-8a29f383a7131033.mspx
Burn a CD or DVD in Windows Media Player: frequently asked questions
http://windowshelp.Microsoft.com/Windows/en-us/help/51a88740-Abda-4144-9176-cec79cca31e81033.mspxBurn a CD or DVD in Windows Media Center
http://windowshelp.Microsoft.com/Windows/en-us/help/9ee6cb78-bd7e-4DE3-A154-82d40c4289e01033.mspxBurn a CD or DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/b47eb51a-ea6d-4d97-97b0-2d07a59316981033.mspx
How to burn an Audio CD - see also related Articles
http://www.vista4beginners.com/how-to-burn-an-audio-CD
Burn a CD or DVD using Windows Vista - a video
http://www.YouTube.com/watch?v=0BwF60m05m8Disc burning: frequently asked questions
http://windowshelp.Microsoft.com/Windows/en-us/help/2fa35b0d-B280-4589-9805-55e753888f5c1033.mspxShould which CD or DVD format I use?
http://windowshelp.Microsoft.com/Windows/en-us/help/2af64e60-60AA-4d79-AB6C-3a5db5806cbe1033.mspxWindows Media Player playlist: frequently asked questions
http://windowshelp.Microsoft.com/Windows/en-us/help/4bf0d986-a1cb-40d2-94de-85dba30a83831033.mspxGet the most out of WMP11http://windowshelp.microsoft.com/Windows/en-US/mediaplayer11/default.mspx
I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Favorites lost after system restore os partition
After you use the system restore on my asus all-in-one, I lost my favorites.followed your instructions can always can retrieve.there are no favorites when I click on precedent. When I try to system restore could not find a previous restore point before final restoration. Help please
Hello
We appreciate your efforts on this issue. Assuming that records favorites have disappeared from view in Internet Explorer and the location of % userprofile%\favorites, try the following steps:
Navigate to the location of the Favorites via Windows Explorer.
Right click on the Favorites folder and click Properties.
Switch to the location tab, and then click on restore by default.
Let us know the status of the issue. If you need help, please after return. We will be happy to help you.
-
My seagate backup more external hard drive not recognized after system restore
I have a small sony vaio netbook running windows 7 starter edition. I did a system restore recently - saved on an external hard drive usb, nine 1 to seagate backup more - now after fighting with 124 updates hard disk is not recognized. Seagate has say the drivers are pre installed in windows. convenience stores never work - I find the trouble shooters are almost always useless - is this just me?
It works on my laptop of friends - so im guessing it is the operating system reinstalled - what I do?
Hello Neil,.
First of all, we apologize for the late response.
- What happens, do not install the updates?
- What is the complete error message you get, when the update installs?
- What is the update kb article number?
for problems with windows updates, run the tool in troubleshooting Windows Update:Open the Windows Update troubleshooting toolFor the problem with the external hard driveCode 28 shows, the drivers for this device are not installed.Error codes in the Device Manager in WindowsLog in as administrator and then try to install the driversHow can I connect as an administrator?S eaTools for Windows
http://www.Seagate.com/in/en/support/downloads/item/SeaTools-win-master/
Additional information:"Access denied" or other errors in the access to or work with files and folders in WindowsI hope this helps. Please get back with the results. -
Re-installation of Captivate 6 trial after system restore
Hi all
I installed the trial 6 Captivate (on Captivate 5.5) Friday last with 0 problems. This weekend I had major issues with my video card driver after changing my resolution and scaling in the Catalyst Control Center. After the restoration of the system - which has again last Wednesday - I was able to update all who need them. When I tried to re - install the trial of Captivate 6, I was able to get all the way to the installation window during initialization. The green bar filled to the top (toward the end it got really slow) and once it has been filled, the window disappeared and nothing else happened after that. I tried to delete the files I had and re - download. I made sure that my Flash Player has been updated (it wasn't) and tried again. Same question. I have restarted my computer several times. That did not help. He arrived at that same place every time and it goes no further. Does anyone have an idea why this is happening?
I spent almost all day in the cat / the phone of an Adobe engineer who literally could not help me. I thought maybe I could find a Captivate 6 file sitting in my registry, but I didn't know (I checked Adobe files). It is not installed, so I can't go to uninstall it, I looked in the control panel. I'm a little confused. I guess that critical a file either has been corrupted during the restoration OR a critical file is missing during the restoration, but I'm not tech savvy enough to know what to look for or where I should be looking for it.
Thanks for any help you can give,
Obsidiangel1982
Hello
Welcome to the forums.
Can you please try this step and see if that fixes the problem. Just go to this place and rename the OOBE old_OOBE folder.
C:\Program Files (x 86) \Common Files\Adobe
and the launch of the installer once more, hope this helps.
Thank you
Priyank
Maybe you are looking for
-
How to change a group of "to of" to "cc" or "BCC"?
I get emails where there is many-to-many 'CC' and I want to answer all of them, but I don't want to do because I respond to each of them... so I need to use "bcc" - is it possible to change all the 'CC' to 'bcc' without going through all 20 or 30 "to
-
HX850 - no adjustment of the image when using netflix
Hello Is it possible to adjust the picture settings when using netflix? All the buttons on the remote seem to be blocked when netflix is running. It is very annoying because I can't disable cinemotion making all movies look like they were saved by a
-
CreateProcess() returns 0
CreateProcess() returns 0, the execution of this code: ZeroMemory (& TR, sizeof TR);Si.CB = sizeof is;result = CreateProcess (NULL, szCommand, NULL, NULL, FALSE, CREATE_DEFAULT_ERROR_MODE |) DETACHED_PROCESS,NULL, NULL, & TR, & piProcess);If (result
-
Upgrade to a wireless network card
Hello I have a two year old Dell, an Intel i7 CPU of XPS Q740 (from system information). Works great but I recently upgraded my router with a N standard with double channels running at 2.4 ghz and 5 GHz, so I would like to improve the network for my
-
Unable to activate Vista.
I own several computers, two weeks ago, I bought W7 and installed on one that had Vista installed on it. I want to put the copy of Vista on another machine and then install XP Home on another. Basically, I.m the upgrade of all my systems 'down the li