Omni 10 5600us: Wireless driver missing after system restore
After a complete restoration of the system, essentially restoring to factory settings and erase everything, the Tablet does not connect to the internet and does not list the wireless network device in Device Manager. Instead, there are 2 generic SDIO devices listed there with no known drivers. I can does not seem to find the driver online and don't want to have to pay for a pilot program restore this driver that should have never disappeared. Thanks for your help!
Senior technician
LovingMyTech.com
Thanks for your help everyone. I was actually able to solve this on my own. LovingMyTech.com
The resolution is to use the device to pcidatabase.com id to identify the device. The aircraft was ID had like Broadcom Wireless 54bg. I have found that this camera in the list of drivers in Windows and it works fine now. Going to try to install the other device generic SDIO now identified as controller RAID ACARD AEC-6897/6898.
Thanks again for all your help.
To learn more about what I do... www.LovingMyTech.com
Tags: HP Tablets
Similar Questions
-
File missing after system restore
Dear Sir.
Today, on a tecra M2, I did a system restore, but suddenly, the message came that I had to re - install the following file: \system32\ntoskrnl.exe: How can I do this: put in the recovery cd or just make a formatting the drive with the restore cd?
Thanks in advance
drweekxHello
System Restore is a very useful tool, but it is not the miracle solution! :-)
Your "ntoskrnl.exe" file seems to be corrupted and this file is very important as you BONE!
You can try to start Notepad, and then press the key "F8". This will take you to a menu and you can choose the 'last known good configuration"and the VGA Mode.If you are lucky your laptop work after that, otherwise you can only recover the portable whole! But if you have important data on the NB you safe to an external drive!
Goodbye Chris
-
DV6 - 6153cl drivers for biometric devices missing after system restore
Hello
I have a HP Pavilion dv6 - 6153cl Entertainment PC with Windows 7. I used the fingerprint reader, since I have my laptop. The scanner has stopped working.
Background: two weeks ago, I downloaded the latest version of Norton 360 (Version 21.1.1.7), which caused my laptop to keep crashing every few hours. After much time consulting technical support, I did a system restore to a few days before the new version download then downloaded the version of Norton 360 and active. This solves the problem of crash.
Problem: After restoring the system, my fingerprint reader no longer works. By control panel > all Control Panel items > biometric devices, "Windows do not have the biometric devices on this computer. You will need to attach your device or install device drivers. "Can someone tell me what are the correct drivers that I need and where to find them?
Thanks for your help!
Hello
First of all, download and reinstall the driver Validity Sensor on the following link.
http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55109.exe
Once completed, restart the laptop.
If it still not works, you may also need to reinstall HP SimplePass on the link below.
http://ftp.HP.com/pub/SoftPaq/sp54501-55000/sp54680.exe
Yet, when it has installed, restart the laptop.
Kind regards
DP - K
-
Adapter network missing after system restore...
I recently restored my old XP due to a massive system failure system. Restoring a drive hard new, reformatted, is well spent, except that now I can't connect to the internet. Diagnosis of the error indicates miss me my "network adapter".
It seems to me that this should have been on one of the restore CD I got with my computer, but I have gone through each of them and can't find anything else to restore. Since then, I cannot connect to the internet, is there another way to get a network adapter? And how do I know if I have the right?
Thank you, haaruun. It turns out that there was another restore disc I had trouble loading and had set aside. I went back to it and was able to find a folder named 'PILOT' on this subject and has moved to my system and that did the trick.
Thanks for your reply, if. I appreciate it.
-
ProBook 6550 b: driver missing Base system device
After you have reinstalled Windows 10 on a Probook 6550 b I can't find the correct driver for both devices.
-Driver missing Base System Device 1:
Device PCI VEN_1180 & DEV_E852 & SUBSYS_146D103C & REV_01\4 & 1089976f & 0 & 02E2 requires installation.-Lack of pilot system of Base 2 device:
Device PCI VEN_1180 & DEV_E230 & SUBSYS_146D103C & REV_01\4 & 1089976f & 0 & 01E2 requires installation.Is it possible to put me in the right direction?
Thank you very much.Lennard
Hello
Try to install the Windows 7 version of the Ricoh Media Card Reader Driver.
Kind regards
DP - K
-
NEED DRIVERS AFTER SYSTEM RESTORE
HP Pavilion g6-2128tx Notebook PC
Serial number: 5CD2231LJF{Information}
After system restore a bunch of drivers was missing, I managed to update some drivers but I need some I can't find. Help!
Hardware ID
Ethernet controller:
PCI\VEN_10EC & DEV_8136 & SUBSYS_183E103C & REV_05
BCM20702A0
USB\VID_0A5C & PID_21E3 & REV_0112
PCI device
PCI\VEN_10EC & DEV_5229 & SUBSYS_183E103C & REV_01
PCI Simple Communications controller
PCI\VEN_8086 & DEV_1E3A & SUBSYS_183E103C & REV_04
SM Bus controller
PCI\VEN_8086 & DEV_1E22 & SUBSYS_183E103C & REV_04
(USB) Universal Serial Bus controller
PCI\VEN_8086 & DEV_1E31 & SUBSYS_183E103C & REV_04
I run on Windows Ultimate-64-bit
Help would be GREAT
Hello
Download and install the following.
After this Setup is complete, restart the laptop.
Intel Management Engine Interface.
Intel USB 3.0 Host Controller Driver.
Kind regards
DP - K
-
Impossible to uninstall Symantec Endpoint Protection after system restore
Hello
a program has been uninstalled (Symantec Endpoint Protection)
After have rebooted and still have problems to install a newer version, I decided to do a system
Restore prematurely, I uninstalled the original version.
(Since I couldn't find the installation files or my license info)The old version worked again. Now I am able to start the
new version, the old version will not uninstall.It just sits there in a small box with a bar saying Windows of progression
in the configuration of Symantec Endpoint Protection and it remains as it
for as long as I left, at least 25 minutes.I thought that the system restore would put things back exactly as they
have been, but it's apparently not the case.OT: Impossible to uninstall after system restore
Any ideas on that?
The OS is Windows 7 Pro 64 bit 64-bit.
I found this, but have not yet tried.
http://support.Microsoft.com/mats/Program_Install_and_Uninstall/en-usI was able to cirumvent the problem by a selective startup in Msconfig.
I disabled all startup items, all services not MS, restarted and then uninstalled
successfully. However, I met another strange problem.
After uninstalling old version, I rebooted (the system was still selective
startp) I put a new restore point and installed the new version successfully.
Later, realizing msconfig has been arrived at "selective", I went and
has tried to return to Normal startup. However, when you select normal
and hit 'apply', it immediately jumps to selective. I have never seen it before.
I didn't know how to solve.
Instead, I uninstalled the new version of the AV program, jumped to the restore point
I did before I installed, rebooted, open Msconfig and have been correctly set up
In normal mode. Then reinstalled the AV.
Everything is OK now.
You ever heard of this problem of msconfig before?
-
I have a HP Tx1000. After windows update (definition update for Windows Defender - KB915597 (definition 1.55.543.0)) I shut down my computer and resume later. Broadcom wireless driver wasn't in my device manager. So I restored back window a few days before and then uninstalled Broadcom wireless driver went to HP and downloaded the driver again and it works fine, until I closed my computer again, and when it restarted the Device Manager could not find the wireless Broadcom driver. Since then, I tried everthing to get Vista to recognize the driver with no luck.
Update - post simular problem
http://social.answers.Microsoft.com/forums/en-us/vistanetworking/thread/5bbfd5bd-caf9-4e65-91f9-f3b8ba366fc9 -
My seagate backup more external hard drive not recognized after system restore
I have a small sony vaio netbook running windows 7 starter edition. I did a system restore recently - saved on an external hard drive usb, nine 1 to seagate backup more - now after fighting with 124 updates hard disk is not recognized. Seagate has say the drivers are pre installed in windows. convenience stores never work - I find the trouble shooters are almost always useless - is this just me?
It works on my laptop of friends - so im guessing it is the operating system reinstalled - what I do?
Hello Neil,.
First of all, we apologize for the late response.
- What happens, do not install the updates?
- What is the complete error message you get, when the update installs?
- What is the update kb article number?
for problems with windows updates, run the tool in troubleshooting Windows Update:Open the Windows Update troubleshooting toolFor the problem with the external hard driveCode 28 shows, the drivers for this device are not installed.Error codes in the Device Manager in WindowsLog in as administrator and then try to install the driversHow can I connect as an administrator?S eaTools for Windows
http://www.Seagate.com/in/en/support/downloads/item/SeaTools-win-master/
Additional information:"Access denied" or other errors in the access to or work with files and folders in WindowsI hope this helps. Please get back with the results. -
Missing files after system restore
My computer crashed in what appeared to be a virus. I did a system restore, but now I always have missing files. I can find them if I search but I can't navigate to them. Any ideas?
Never mind. The restored files were hidden... weird.
-
Disk space HARD disappeared after system restore
A day ago, I decided to free up space on the C: drive of my computer. By the time my drive was 10.4 GB of space. I deleted some old games and files, releasing much of the space and defragged my system gives me a total of 29.5 GB of space.
Shortly after, I was forced to do a restore of the system on my computer to correct an error. To recheck my space on the drive, he came to 10.4 GB. Deleted programs have not returned and after a thorough check of the system. I tried several other forums as to find an explanation for the missing space, but most of the answers in the forums does not solve the problem at all.
What happened to the 19GB of space freed after deleting these files and old games?
Hello
Since you did a system restore, fragments of programs that have been installed on the system earlier were able to return. I suggest you follow the steps mentioned below.
Step 1:
Run Disk Cleanup on the system. See the article mentioned below.
Description of the tool in Windows XP disk cleanup
http://support.Microsoft.com/kb/310312
Step 2:
I suggest you to do a Disk Defragmenter. See the article mentioned below.
How to defragment your disk Volumes in Windows XP
http://support.Microsoft.com/kb/314848
Thanks and regards.
Thahaseena M
Microsoft Answers Support Engineer.
Visit ourMicrosoft answers feedback Forum and let us know what you think. -
BootMGR is missing and system restore hangs
Hi my computer is having some major problems.i have an elite of HP Pavilion with windows vista (home I think?) 32-bit. I started this morning to find that he said 'impossible to start windows' and then I ran the unsuccessful startup repair. I ran system restore to try to solve the problem, but after he reformatted the hard drive, it bluescreened so now it's saying "BootMGR is Missing". my computer did not come with restore disks, so I borrowed one from a friend and he told me that there is no OS and it can't fix the Restorer of the system. Help, please
Hello
Looks like you may have a hardware problem
and if the recovery process back to factory settings vista does not work, you will need to contact the computer manufacturer
It's their recovery process not microsofts
HP support
http://welcome.HP.com/country/us/en/contact_us.html
HP support forums
read this and try this 1st
You can't just borrow anybodys vista recovery disk
manufacturer's recovery disks are the brand and the specific model
for HP, press F11 at startup to start the recovery process
or contact HP and ask them to send you in vista recovery disks to reinstall the operating system back as it was when you bought it
they do it for a nominal cost of $
or borrow a vista microsoft dvd
Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer
they contain all versions of vista
This is the product key that determines which version of vista is installed
-
Dell V313 does not print after system restore
My apologies if I should have posted this elsewhere.
I have a printer all-in-one Dell V313, using Windows 7, 64-bit. I really like the printer.
I used the "remove IE11 update' to good use, and he continued to print well for about a month, until...
My father ran a system restore point to solve another problem, and now I can print is no longer. DOH!
I moved that pesky IE11 updated again, but this does not solve the problem.
When I "Launch Dell printer at home", instead to open the main menu, a dialog box pop box, asking me if I want to open, save, or cancel the download to a temporary file named "DSX # .tmp", where # change every time.
I opened it with notepad and this file seems to contain a rudimentary version of this main menu, but of course it is not interactive. (The home Dell printer menu is never responsible.)
Another interesting note is that when I print something (does not seem to matter what program), the printer status area is not - what appears instead is a html file called jswdialog.html. This file is apparently empty.
I made Java and run-time environment has been updated, just in case. I tried to remove all traces of the printer (by removing prints, queue, stop/print spooler, printer, uninstall drivers uninstall from compensation), and reinstall everything from scratch, right down to the firmware of the printer, but nothing will print when I ask him.
Instead, it adds the work in file print, which then comes out after a reboot.
The scanner function works of the printer itself, although this menu of the printer on the Dell home page will not start.
Any suggestions? I must be missing something, but I don't know what. My last resort is to reinstall Windows, or reset whenever I want to print something, but I'd rather not.
Thanks for reading,
Matt
Matt,
Try these teak and see if it prints. If it's not I can guide you reinstall the printer, but printing or tasks that can be frozen in the queue will need to be removed or the problem would remain.
Start, Control Panel, Manager of devices.
Go to the section USB controller, and then click the plus sign +.
Go to each USB hub root and right-click on it, on the left, click Properties, on the left, click power management. Uncheck the allow the computer to turn off this device to save power.
Restart your computer.
--------------------------------------
Start, Control Panel, Manager of devices. Click Network and then right click on your wireless network adapter, on the left, click on properties, power management. Uncheck the allow the computer to turn off this device to save power.
Rick
-
Re-installation of Captivate 6 trial after system restore
Hi all
I installed the trial 6 Captivate (on Captivate 5.5) Friday last with 0 problems. This weekend I had major issues with my video card driver after changing my resolution and scaling in the Catalyst Control Center. After the restoration of the system - which has again last Wednesday - I was able to update all who need them. When I tried to re - install the trial of Captivate 6, I was able to get all the way to the installation window during initialization. The green bar filled to the top (toward the end it got really slow) and once it has been filled, the window disappeared and nothing else happened after that. I tried to delete the files I had and re - download. I made sure that my Flash Player has been updated (it wasn't) and tried again. Same question. I have restarted my computer several times. That did not help. He arrived at that same place every time and it goes no further. Does anyone have an idea why this is happening?
I spent almost all day in the cat / the phone of an Adobe engineer who literally could not help me. I thought maybe I could find a Captivate 6 file sitting in my registry, but I didn't know (I checked Adobe files). It is not installed, so I can't go to uninstall it, I looked in the control panel. I'm a little confused. I guess that critical a file either has been corrupted during the restoration OR a critical file is missing during the restoration, but I'm not tech savvy enough to know what to look for or where I should be looking for it.
Thanks for any help you can give,
Obsidiangel1982
Hello
Welcome to the forums.
Can you please try this step and see if that fixes the problem. Just go to this place and rename the OOBE old_OOBE folder.
C:\Program Files (x 86) \Common Files\Adobe
and the launch of the installer once more, hope this helps.
Thank you
Priyank
-
Satellite A500-1CO - loss of data after system restore
Hi all, because the system was slow I decided to restore the system using the DVD of restoration system (1,2). The problem is that I have not saved anything from drive D, and after the restore, all files have been deleted. My logic was unaware that the restoration apply to drive C (system disk) and let the D drive as it is, but I was so wrong.
Is there a way to recover all or part of the lost data?
Please help me. Thank you.
Hi mate
Unfortunately, I think that there is not much to do now.
Recovery DVD redefines the laptop to factory settings and, therefore, this disc format the whole HARD disk and also all the partitions and, therefore, you will lose all data if you n t backup this before starting this procedure.You should read the user manual or information before starting the recovery. :(
Maybe you are looking for
-
I created CSV file and want to read a particular item in the file of my vi
I use file read for the first time and created this vi. But I can't read part 4 of the file, so I can show the image given of the value 4. Could someone check my VI and tell me where I was wrong
-
I get this error when I try to open a session in my DC.and the connetion ends to
-
Why do I unplug my external drives when I reboot
Using Windows Vista 64, the computer will not restart unless I unplug my external drives. Can I avoid having to do this?
-
HP Pavilion p6110f Desktop PC graphics card
Hello I have a HP Pavilion p6110f Desktop PC, what is the best graphic card for this computer for gaming? Thank you
-
Hello, I use the code edition http://supportforums.blackberry.com/t5/Java-Development/Sample-quot-Please-Wait-quot-screen-part-1/t... I my case, I have a class of service that calls the connecction and Treaty the info leave in a vector. My code is: F