Adapter WiFi does not see my link ap?

Similar Questions

• link action in the dashboard does not see my reports

  Hello world

  I'm trying to build a dashboard that the first page has several links to pages, each page has several report

  the question am facing is when I'm creating the link of Action and eyebrows through it, I don't see / my reports does not see the link of action

  no idea why?

  If you have tried to create Action link to a BIP report via access BI content you will notice you get an error message.

  My work around has been to use navigate to a Web Page and then use the URL to the report when I open the report in the browser

  w

• Google does not see my menu as links

  Hi all

  I checked my page rank with the SEOBook tool in Firefox and it came to my attention that I have the menu is not displayed as links, it's just shwoing as text. I also had a quick glance with firbug to realize my all menu is displayed as a table instead of links. I have no idea why it's as my menu was created using dynamic menus within catalyst. Please can someone shed some light on this?

  Kind regards

  Asad Ali

  Hello Asad,

  Google does not see the menu links because you're using the default menu type, which uses javascript for example onclikc

  onclick = "document. Location ='/ who_we_are'; »

  You should only use the type of menu HTMl if you want it to be SEO friendly.

  See you soon,.

  -mario

• Satellite 1415 does not see HARD drive

  I just finished my old 30g HD to a 160g via a cable usb/ide on my Satellite 1415 cloning/adaptation.

  I've used Norton Ghost who said using the copy MBR 'not' option, I have to format the new drive. It took me over six hours to do due to overheating closed the first period which forced me to do it again.

  Now with the new full disk, I installed in the machine and starts, received a message "NTLDR is missing" on the first try. After going in (WinXP) disk management I noticed that the new drive was now three scores, two the same size that the old hard drive and the last not allocated. I looked at the files in the first partition and found that I do not need so I deleted the files and the partition. The remaining active partition has all the Po files, that I need so I have it assigned a drive letter.

  Now to start with the new drive I get missing operating system message. I ve changed the boot order and linked to the boot the ghost CD but had no luck with either. Of course the machine does not see the disk, so my question is how I can get to see the new drive letter to start when it seems now that for a C:\ drive?

  The only option I see in the BIOS is boot order change. Thank you

  Hello

  To better understand:
  The ability of the entire HARD drive is recognized properly?

  To be honest, the whole story is a bit confusing for me. I use Norton Ghost with WXP too and I know that you can create your own recovery image and burn on CD or DVD. This medium, that you can use to install an operating system.

  You can also save files to recovery on the second partition and then copy to external HARD disk.

  With the new HARD drive using Microsoft facilities CD and install WXP. Create own partitions on the new HARD drive and all ghost copies files to the second partition (new HARD drive). You may not install all driver and tools but install Ghost on this OS fresh and naked. Start the ghost and Recover My Computer option. So, after 20 minutes, you'll WXP as on the old HARD drive.

  I did it with my old Tecra.

• Satellite A30 does not see other devices in the wireless network

  I recently bought a Toshiba Wireless LAN Mini PCI Card, I installed and was able to recognize my broadband, but he does not see the other network devices. I have not provided with drivers or software for the operation of the card (I bought a decent retailer). Can you recommend me to downloads that would be this card?

  I have a laptop of Satelite A30 1 GB ram 60 GB HDD.

  Large files sometimes also stop transfer (crashes) when you use my USB connection. The usb controller uses the driver microsoft 5.1.2600.0 dated June 1, 2002.

  Is this a driver problem?

  Hello

  If the wireless network adapter is properly installed if you have not configured you.
  I put t know which devices in broadband services, you want to say but generally if you want to communicate or transfer files between laptops through the WiFi network so all the computers must be in the same domain or workgroup.

  I can't give you a correct answer, but only a suggestion. I have red that sometimes a lower potency could be responsible for this show. Try turning off the safe power option in the properties of the hub USB root in Device Manager.

  Hello

  If the wireless network adapter is properly installed if you have not configured you.
  I put t know which devices in broadband services, you want to say but generally if you want to communicate or transfer files between laptops through the computer WiFi network so all must be in the same domain or workgroup.

  I can't give you a correct answer, but only a suggestion. I have red that sometimes a lower potency could be responsible for this show. Try turning off the safe power option in the properties of the hub USB root in Device Manager.

• Satellite P500-1CK - WIFI does not work

  Hello

  I bought a Satellite P500-1CK with Windows 7 64 bit. Cause I don't need, I replaced it with Windows 7 32 bit and now my WIFI does not work.

  I tried many drivers, Toshiba drivers and Realtek drivers, old and new versions. Installed and uninstalled them again and again. But it does not work. In the Device Manager, there is no error and no question mark. The map will be displayed as a RTL 8191SE, it's true. I've identified the vendor & device ID also.
  The other FN keys works like a charm, but FN + F8 does not appear. The wireless switch is active and the led is orange.

  When I type "cmd" then "ipconfig/all" it will be only shown the PCI Atheros Gigabit Adapter with the IP address, but not the adapter WLAN of Realtek.

  Searched Google @ and spend hours and hours, but I am at my wits end... Please help me.

  funthomas22

  Hi funthomas22,

  And this doesn t work exactly?

  You see a WLAN in range?
  Have you looked for WLAN networks?
  Can you connect to WIFI networks?

  A point would be interesting: can you try the same thing with preinstalled Windows 7 64 bits instead of your own 32-bit installation?
  Therefore, use the recovery disk Toshiba to restore the version of the OS preinstalled. You will have a pre-tested Toshiba Windows 7 installation where everything should work properly.

  Check this box!

• After you have uninstalled McAfee, my Wifi does not work (only works LAN connection)

  After you have uninstalled McAfee, my Wifi does not work (only works LAN connection). Troubleshooting message is "windows could automatically bind the ip Protocol to the ip stack.

  New Aspire E11, Windows 8.1

  Help, please.

  Here is how I fixed it:

  Go to control panel > network and Internet > network sharing Center

  Click on "Change adapter settings" in the left pane.

  Right click on your map. Select "Properties".

  There will be a box titled "this connection uses the following items."

  Uncheck anything that looks like it was installed by a third party (AVG, Avast, ZoneAlarm). In my case, the culprit was 'HTC NDIS Protocol Driver", who was installed by the software of my phone (HTC). Because it's not obvious what to uncheck, here is what I currently have checked in my system of work which should not cause a problem:

  KEEP THESE CHECKED:

  Client for Microsoft networks
  QoS Packet Scheduler
  File and Printer Sharing
  IP v6
  Internet Protocol v4
  Driver Link-Layer Topology Discovery map IO
  Link-Layer Topology Discovery recall

  Uncheck everything else.

  Go to network and sharing, disable and re-enable the adapter.

• WiFi does not work after last update 4.3 android

  Hello, I've updated my Xperia TX for andorid 4.3

  but the wifi does NOT work!

  and I have no screenshot option.

  Please what can I do?

  In this case, I suggest that you try to reinstall/repair the phone using PC Companion software:

  http://www.sonymobile.com/update

  In PC Companion, press start on the support Zone > begin on updating the software of the phone/Tablet > press the blue link that says "repair phone/tablet.

  Before repairing the software of your device, you can back up your information first. See this topic for more information on how to:
  http://talk.sonymobile.com/T5/FAQ/backup-amp-transfer/m-p/407253#U407253

• Network adapter driver does not work with the recovery discs provided by hp

  Hello

  My wireless light does not illuminate. The network adapter driver does not install from the recovery of the driver CD.

  Here is the hardware ID. Please provide a link to the drivers:

  PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C & REV_01

  PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C

  PCI\VEN_10EC & DEV_8176 & CC_028000

  PCI\VEN_10EC & DEV_8176 & CC_0280

  Thank you

  You are the very welcome.

  It does not sound like a heat problem.

  I don't know a lot about the repair of hardware issues beyond replacement memory and hard drives.

  I could try to clean the area of fan/radiator with a can of compressed air and see if that clears any dust that may accumulate.

  To do this, disconnect the laptop from the AC adapter and remove the battery.

  Insert a rod through the air fan to keep the blades turning when you spray air.

  Spray through the air intake fan and watch to see the dust out of the exhaust.

  Repeat once or twice and blow air from the other direction of the drain line to the fan.

  The other driver, you need is the driver of protection Protectsmart hard.

  See if it works.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-116584-1&cc=us&DLC=en&LC=en&OS=4063&product=5278311&sw_lang=

• Re: Portege M800-10Z - WiFi does not work

  Hello.
  I have a problem. I recently bought Toshiba Portege M800-10Z and downgraded Windovs Vista to XP service pack 3. All right, but the WiFi does not work.

  I tried to upgrade the wireless Lan driver, but it still does not work...
  I have Intel Wireles WiFi Link 5100 and system is Windovs XP service pack 3
  Is there someone who could help me with this issue?

  I would be very grateful for advice.

  Thank you very much

  Hello!

  That you say with the WiFi does not work?
  Can you connect to the router?
  The WLAN card is recognized in Device Manager?

  To solve this problem make sure that you have the latest version of the BIOS. Check on the Toshiba site.

  Also disable features of security as a hidden SSID, MAC address filtering and so far away.
  Check if an update of the firmware on your router available.

  Good bye

• The new version does not see my camera. But my cam works well with older versions. What should I do?

  The new version of Skype does not see my camera. But my cam works well with all older versions. And it works with any other programs as well.

  Try to uninstall the version 6.18 and install version Skype 6.14.0.104.

  You can use this download link for the 6.14.0.104 version:

  http://community.Skype.com/T5/Windows-desktop-client/ASUS-USB2-0-webcam-not-recognized-by-Skype-6-18...

  Don't forget to turn off the automatic updates:

  Tools-> Options-> Advanced-> automatic updates-> turn off automatic updates

• Portege A600-138 with Vista 32 bit does not see the computers in the Group Win XP network

  Hello

  My Toshiba Portege A600-138 with Vista Business 32 does not see the computers in the workgroup.
  In our office, the computers are all equipped with Windows XP.

  When I connect my laptop to the Local network, I don't see any neighboring computers in Network Explorer.
  I spent 1 hour and 40 minutes to talk to a specialist Service of Support from Microsoft, and the only way to have access to local machines, we found it had to enter the IP of the computer directly into the computer browser path field.

  I hope you understand what I mean.

  The man said that he had no this problem with non - OEM Windows Vista versions.
  He meant that the problem was with the oem versions of Vista preinstalled on laptops only.
  He said that probably the sellers - in my particular case Toshiba - supplied their notebooks with VIsta oem images that were somehow corrupt.

  Does anyone have an idea of the cause of this problem?

  > The man said that he had no this problem with non - OEM Windows Vista versions.
  > It meant that the problem was with the oem versions of Vista preinstalled on laptops only.

  That's nonsense for me
  The Vista OS preinstalled Toshiba which is same BONE as full Vista disc from Microsoft.
  There is only one difference; Toshiba laptops are preinstalled with Toshiba and pilots tools and drivers and tools are part of the Toshiba recovery image that contains Vista, driver and tools

  Check this box:
  http://www.Computerworld.com/s/article/9019179/Teach_XP_and_Vista_to_play_nice_on_networks?taxono myId = 16 & pageNumber = 1

  You will find information that a problem has to do with the new Windows Vista network map.
  Windows Vista uses a new Protocol (Link Layer Topology Discovery).
  LLTD is integrated with Windows Vista, this is why they appear correctly in the network map.
  But the problem is that LLTD is not integrated with Windows XP, which is why they do not appear correctly.

  But you can fix the problem by downloading and installing the layer topology discovery responder.
  Install it and your PC Windows XP will appear on the network map.

• Satellite L670 - after Win 8 upgrade WIFI does not work properly

  Afteer upgrade to Win 8, the WiFi of my Satellite L670-128 has stopped working properly.

  The connection only works some time, usually only a few seconds before the connection is lost.
  After a few seconds or minutes the connection is restored, just soon to be lost again.

  Cannot download large files or even to see larger photos on normal web pages. Is there any Win8 driver for Broadcom coming 802.11n network card, or should I throw one 2.5 year old computer in the trash?

  Buy a usb-wlan card is not an option, as wireless mice is already "permanently" reserving one of the three usb ports and wlan card it would be just to the left...

  To my knowledge this L670 series isn t Win 8 taken in charge and this means that there is no special Win 8 drivers for this device, so I put t think you will find an another Win 8 driver for this WLan card.

  But do you really want to throw this laptop in the trash just because the wifi does not work properly running Win 8?
  The device was working properly under Win 7?

  I would recommend running a few Wlan test.
  For example; Disable wireless encryption on your router and Wifi connectivity with the open network do that just for testing purposes, perhaps you will need to change the type of encryption to test.

• Satellite A200 - 23 c does not see the 2 GB Memory Stik Duo

  For me for laptop Toshiba Satellite A200 23 C. I

  t does not see memory card 2 GB Memory Stik Duo. I changed operating systems that did not help.

  All devices to see this card but on my laptop is not present.

  Other maps of working memory. How it can be a business.

  If possible, write in Russian and in English not absolutely understand that.

  Thank you

  First of all in this forum, you can post only in the English language. Other languages are not tolerated.

  Back to your question;
  Have you checked if your laptop Satellite A200 - 23 c supports this type of card?

  I ask because not all cards can be used in the slot of the card reader!

  As far as I know this laptop supports:

  -SD Card 8MB - 2 GB
  -SDHC 4 GB card
  -16MB - 2 GB xD Picture card
  -Memory Stick 8 to 256 MB
  -Memory Stick Pro 256 MB to 2 GB
  -MultiMediaCard 8 MB - 1 GB
  -miniSD (with SD adapter) 32 MB - 2 GB

  The Memory Stick Duo is NOT supported!

• RALink RT3290 does not "see" the 5 GHz networks (802.11n)

  I just bought a HP Pavilion 17 Notebook PC (number of product F9M00UAR #ABA) with victory 8.1 x 64 installed and the wireless card does not 'see' any 802.11n networks.  The driver installed is 5.0.37.0 with a date of 25/11/2013.

  I've seen problems with upgrades to 8.1 affecting the adapter, but nothing works not properly out of the box on a new machine from 8.1 to WIN.  Can anyone offer any suggestions on how to force it to see 802.11n?

  Thank you

  Mark

  Hello:

  The WLAN RT3290 card is only a single band (2.4 GHz).  He can not find the 5.0 GHz band.

  Whenever you see a suffix of bgn on a description of the wireless card, it means that it is a map only single band (2.4 GHz).

  Cards N whose suffixes ending with abgn or agn wireless dual band (2.4 GHz/5.0 GHz).