Add Audio to a Flash presentation

Similar Questions

• Audio in .fla (flash 8)

  For some reason any when I add audio on my calendar and go to rub, I hear, but when I publish the .swf, it plays very well.
  
  I tried the other audio piece without success also.
  
  The only thing I can think is to re - install Flash 8, but was looking for other suggestions first.
  
  -Wyl

  If you had checked your help files for Flash, you would have found your answer quicker that post to a forum. Anyway, here it is: change the audio properties "Stream". Then, you can rub the sound.

  First, try the help files for future problems.

• How to record the screen and add audio with QuickTime?

  I can't wait to make my first video through QuickTime player, but I'm stuck on the following:

  (1) new screen recording - I'm able to capture the process of my video with this feature

  (2) audio new recovery - separately, I can record my audio

  But can't do the task above at the same time which means that I can save the process through and add my voice at once? Is this possible?

  Hello Vishal2014,

  I understand you are trying to create videos with recordings of screen as well as a voiceover. I can help you with that.

  Now, when you set up your registration form, you have the option to choose a microphone to talk and create video at the same time. This would reduce you adding the clip after the fact. Take a look at the first link below that will go on the way to do this.

  Save your screen
  https://help.Apple.com/QuickTimePlayerX/Mac/10.11/index.html?localePath=en.lproj #/ qtp97b08e666

  Now if you want to add audio to the video that you already created, consider using iMovie. You can import video, and during playback, you can save your audio files on top of the video. Take a look at the following article for more details on how to achieve this.

  iMovie (2013): add audio and music
  https://support.Apple.com/kb/PH14708

  Take care

• Add audio to 8 Captivate

  Hello world

  Wanted to ask what are the general approaches of the people to the add audio to 8 Captivate?

  I think it's quite long and counterproductive to add a voiceover full record for an entire project and divide by the slide markers. Captivate only really seems like you're doing this 'once', as when you save, all lengths of slides are changed to the length of the audio.

  The best way I found is to edit and export clips in Adobe Audition, and then import them on a slide-by-slide basis. Even if this is a bit problematic if you have audio to extend across multiple slides in a software simulation.

  Thanks in advance for your comments,

  Ben

  Hi Ben,

  I prefer to save in hearing myself (control freak), but will also create separate audio clips, one for each slide. I'll import to library, then drag each of them to the slide in the case of slide audio. Good labelling helps a lot.

• How to create audio monitor in flash

  Hello everyone must help to to make an audio monitor ...

  
  it is very important! homework!
  
  Thank you...
  
  
  I want to le image functions of work...

  

  http://code.tutsplus.com/articles/render-an-MP3-audio-spectrum-in-Flash-with-computespectr UH - active-10808

• Add audio does not work

  When I try to add audio, either I get an alert 'lack Bo' or nothing happens and the audio is not added (in the first clip). Audio "clip Prime Minister themes" works, but I cannot add anything to my music library.

  Hey guys,.

  We just released a new version of Adobe Clip. Could you please try with the 2.0.3 Version.

  Thank you.

• Is it possible to add audio keyframes to a source clip in the source monitor?

  Hello, is it possible to add audio keyframes to a source clip in the source monitor? (Not the chronology)

  I would like to dive and pre selectively switch off at the source-clip in the trash.

  Bonus round... are waveforms audio visual available somewhere in the source monitor Panel?

  Perhaps with a thread of keyframe-able?

  Thank you very much

  You can not key frames in the source monitor Panel (the Master Clip function applies not to the audio only).

  For the waveform to appear: fiddle the cursor or the playhead in the SM. (this is a bug).

• Add audio comments for slide show

  I would like to add audio comments to a slideshow, no music.  Need to have the audio to be synchronized with the slide show. I use Apple hardware.

  Thank you, Alexander.

• Add audio clips in MUSE

  I would like to add audio music saved on a CC2014 MUSE website designed for musicians.  I'm not sure how to do this.  Please notify.

  Hello

  some useful discussions

  Put mp3 music on the web page of muse?

  How to put an MP3 in muse

  Let me know if you have any question.

• The blades does not add audio

  Hello again,

  I worked on a market course and stop for a while in Captivate 7. Today when I added 7 new landslides I went to add audio to slides via Audio > management of speech and slides do not appear for me to add the audio. I saved the course and restarted Captivate but the blades are still missing in the management section of the speech (they appear in the film and can be modified if)

  Hello

  Can you try to clean the preferences by closing 7 Captivate first, then go to: -.

  C:\Program Files (for 64 bit) or Program Files (x 86) (for 32 bit) \Adobe\ Adobe Captivate 7 x64\utils\ and CleanPreferencesWin.bat file to run.

  Launch of Captivate 7 by a right click on it and select run as administrator and see if that makes a difference.

  Kind regards

  Ajit

• Audio editing based on presenter 8 slides

  Greetings:

  I have a very basic question.  When you use presenter 8, how we re - record audio on a single slide in the presentation?  I noticed the mention of the option to record the audio for the entire presentation or a single slide mode, but this box does not appear when I type record. All I want to do is find the way the faster re - save a single slide in a presentation.

  Thank you

  Hello

  Audio recording for any slide replace the previous audio present on the slide or

  simply record audio if the blade has no audio.

  Here are the steps:

  1. display the slide you want to edit audio.

  2. click on the audio button.

  3 PPT slide show and the record dialog box will appear once the device (MIcrophone) for registration will be verified.

  4. click on the record button on the recording of the presenter dialog box and start recoeding.

  You must save the audio once you have finished recording.

  There is a Slide Navigator on the record audio dialog box that can be used to navigate to any slide in the presentation.

  A 'play' button is present to play and control audio recorded.

  Thank you

  Sunil

  Adobe Presenter Engg team

• After the update of the Mavericks, I'm not able to sync audio in a flash animation.

  Hello

  After the update of the Mavericks, I'm not able to sync audio in a flash animation.

  I did:

  1 has created an animation

  2 Adding audio to the timeline

  3. Sync selected in the sound Properties window.

  According to what I've done was to adjust the animation to the sound and you press 'enter' plays the audio, it actually creates a noise.

  Hope you guys have my problum

  Please notify.

  Kind regards

  Rabi Raja

  The new update (version Flash Pro CC - November 2013) which has a fix for this 10.9 OSX sound hum issue is now available for you. This update of Flash CC will update your version of flash to 13.1.0.217.

  You can update the application Adobe Creative Cloud or Flash Pro CC help-> Update menu.

  You can find more information about the update: http://helpx.adobe.com/flash/using/whats-new.html

  Thank you

  -Reynaud

• Add audio to slide shows using 11 items and itunes.

  Updated to 11 items 9

  Running Windows 7

  I make a slide show and would like to add audio from my itunes library.  When I click to add audio and browse my itunes library, nothing shows after that I click on the album. In an older version, I would like to change the file to a WAV file and it would do very well.  The new itunes doesn't let me do it onlyl to an AAC file (don't know what it is) when I'm trying to say it is protected and cannot change it.  How can I add audio files to my slide show using itunes?

  Thank you

  Once, iTunes doesn't have a way to get their music in programs, as before, at least not directly.

  At the time, the workflow was to go to iTunes, create a Playlist for the necessary music from iTunes, then burn it to an Audio CD. Once this is done, we take this CD in a program like the free Audacity, RIP CDA, then Save_As WAV format, choose 16-bit 48 kHz PCM/WAV. These WAV files were imported in pre.

  At some point, they have loosened things up a bit, and many had no problem with a direct Import from iTunes.

  Now of course what they do now, but many, like using music from other sources, rather than iTunes.

  Neale has linked to a conversion request, but I've never used. OTOH, if Neale recommend it, then it should work perfectly.

  In addition, according to Adobe: http://helpx.adobe.com/photoshop-elements/kb/supported-file-formats-premiere-elements.html, AAFC is an Audio Format supported.

  As I rarely use any music from other sources, beyond SmartSound, I haven't stayed current on the operation of iTunes.

  Good luck

  Hunt

• How can I animate in sync with an audio file? Flash CS6

  I need to create an animation in flash which is placed in Captivate as a swf file. The animation should be in harmony with the slide audio in Captivate. I imported my audio file into Flash and placed on its own layer in my animation.

  

  When I press Enter to play my animated film, everything seems to work properly. the audio plays in sync with my animated film. However, when I press Enter to stop plackback, the playhead stops, but the audio continues to play and will not stop until I have close Flash. What is the proper way to animate in sync with an audio file? Or should I do this another way?

  Click on frame 1, layer 2.  in the properties panel, assign the stream sync property.  Repeat the test.

• Why Flash presentation retractable or not completely show preview in browser?

  Whenever I saw the FLASH presentation I've created, in a browser, gets cut off the lower part of the presentation or the entirety of the presentation is shrinking.

  My stage size has been set at 524 x 1048 because it is the width of the space I have for it on the Web page. When I saw in a browser, does not show the lower part of the presentation. I needed more space downstairs so I changed the height in 2000 and when I saw it, the presentation was shurnk.

  Any idea on how to keep my demension and still be able to see everything? I know that the scene is long, but I want users to be able to scroll to the bottom of their browser to see the bottom.

  in your swf embed html, at the top between the head tags find:

  change to the