Add clouds to empthy DC experience

Similar Questions

• Can I 'paint' a blue light in a sky that is basically white?

  I shot some pictures of a House, but the sky was clear, but blurry. The sky turned white in the photos. Is there a way to simulate a sky blue... just a shade of blue would be all I want.

  Laure

  See this link, except instead of put in the clouds, you add the gradient layer:

  Add clouds to empthy DC experience

• Security in the cloud

  I've always had this question in the back of my mind and always there:

  "Who hold the account root on the cloud? AND where the equipment? "

  For a customer who is owner of its hardware and software on its site are the unique root/admin, and that he wants to add, but the cloud changes this understanding. Unless that cloud providers to offer a block of material to the customer who was in turn to (former data centers). So, how can we overcome them?

  DJ

  Hello

  Hello, I assume that firms are in the cloud, because in my experience a lawyer would ask which access to information and it's always a problem.

  Not really, I know that some of those who use the cloud, the key is to understand how to properly use the cloud. For example, some lawyers use Forefront and Microsoft Exchange in the cloud. When using such a service, digital signature of e-mail makes sense but also ensure that critical data do not leave the scene, so a solution like Zscaler DLP can be justified.

  Re: jurisdiction

  You're right, it's a big problem if you are using a cloud that spans the country, but to the United States, not much cover countries and it is almost impossible for your data to be included in another country, this is why you must correctly interagate your Cloud provider to determine the limits of its jurisdiction. The European Union on the other hand can have problems with this.  A recent example is democratic party Canadian, that they wanted to use Salesforce (based in the United States), they have determined if they encryption data before placing it in Salesforce, it meets all of the conditions and that the United States could not decipher at will.  So in this case data on site encryption and placing it in the cloud are a way to work around this possible issue.

  Re: In memory has the keys

  It's true, no way around it if you do the encryption in the cloud, I suggest encryption before you leave your premises and then place it in the cloud. Very powerful in this way. Just to make sure that its usable.

  Remember it is not really on the virtual machine or the cloud itself, but security in the cloud is on the data, yes the cloud, you choose the secondary controls needs such as IDS/IPS, but ultimately it is your data that counts. Therefore, encrypt and sign necessary to confirm the integrity and confidentiality and use well known, encryption mechanisms, like something blessed by your Government which believe me did exhaustive tests and tackles cryptanalytic against it.

  Finally, do your research and due diligence, keep updated with the cloud and data attacks, so that you are prepared for the worst. This kind of intelligence is essential to the continued safety, do not depend on the tool providers to do it for you as you risk your data as such in the end data security is your responsibility.

  Re: Supplier responsibility

  In every cloud provider document I've read in the United States, you assume all risks, not them. There is no sharing of the risks here. It's your data, your responsibility. In the EU, it is a little different because of different laws.

  Encryption and digital signatures are not the end of privacy and integrity but if properly will protect your data. If you stay ontop of the intelligence about the attacks, then you will know also better ways to protect your data.

  Not all solutions of cloud IaaS and maybe if put you up an IaaS, you should consider how data moves, is operated, and know if you can use something like CipherCloud to encrypt/decrypt the data as it leaves your premises for use within your cloud IaaS...

  Best regards

  Edward L. Haletky

  Host communities, VMware vExpert,

  Author: VMware vSphere and Virtual Infrastructure Security,VMware ESX and ESXi in the 2nd business edition

  Podcast: the Podcast for security virtualization of resources: the virtual virtualization library

• Files icon creative cloud on the Windows Explorer pane

  How can I remove this Adobe? I don't want that, he did not and will never use it. I spent all day trying various Registry hacks to remove the thing ugly dam only to come back upon reboot. It's a matter of circuit breaker, on top of all creative cloud (which is terrible) experience, it's the straw that could break the camels back and make me cancel my membership and return to CS6!

  It is an active process associated with the icon.

  If you hate the icon that you want to cancel your subscription.

  Run the Task Manager and check our ACC processes that are running, all related to the icon of the CCA.

  You can go before it starts under the Task Manager and disable the process that will get rid of the ugly icon, and then none of your Adobe applications will run.

• Synchronization of files on the cloud does not work

  Hi yall,.

  I just posted this on this forum, but I know that I am the only one to do it in French. So I post it in English. I could reach more people able to help me.

  If it's just the same post, I realize, by reading all the other messages, although Adobe software are great, their ability to manage the cloud is... far from perfect.

  Here is my post.

  For a few days (even weeks now), I can't sync my files on the creative cloud.

  In the menu bar, the Creative Cloud Desktop icon appears as follows

  and Creative Cloud Destop window like this

  

  I have no problem to connect with my Adobe ID if.

  If I try to access my files (uploaded in the cloud until this timing issue occurs) with a browser (Safari) to the https://creative.adobe.com/files#, I always get the following message

  Your account is under routine maintenance.

  We work to improve the overall performance of the cloud creative files of experience. Your account will be accessible shortly after. Please check in minutes.

  Thanks for your patience!

  "Shortly" doesn't seem to be the appropriate term?

  And Adobe is quite optimistic, I fear

  

  Note: the problem is the same on my iMac, my MacBook Pro, my iPad, my iPhone and even with browsers other than Safari...

  So I tried to create an Adobe account with a different email address and this is what I get the same address as above (https://creative.adobe.com/files)

  

  So what?

  My problem, or one of the many Adobe with the Cloud problems?

  Hope someone here can help me

  Thank you

  DENOËL Jean

  (Belgium)

  • Response

  |

  Modifier

  |

  Delete

  |

  Hi Dave,.

  Even with the delay I am gratefull for your answer.

  I don't have this problem.

  It was resolved days (or even hours) after the last major update of the creative cloud (the one with the new Mobile with Lightroom).

  And I am now fully operational.

  I guess that my problem was related to the work involved in this update.

  In any case, thank you for having responded to me and your desire to help. I have apreciate.

  Jean

• Adding an image cloud

  Hello

  I'm new to photo shop elements 9 and get on with it quite well. However I have a few photos of the aircraft with a background of white sky. I would therefore add clouds. I can't understand how to do this.

  Can someone please help?

  Pete

  Ah, thanks for the clarification.

  Now, it's for Photoshop and may or may not work in PSElements (I just don't know the full capabilities and limitations of this program), you will have to perhaps "read between the lines" and interpolate and PSElements.

  1. In PS (probably the same thing here in PSE), open both your original Image, with the aircraft and 'cloud' Image. Select an area around your 'cloud', including some sky. I would probably use the Lasso to this selection and make it roughly and by the eyes. I had also put pen to paper to about 3-5 pixels to feather the selection. Clean us afterwards and soften even more, worry not if the selection around the cloud is rough. Not since getting critical at this stage. Copy (Ctrl + C on the PC) and then go to the Image "plane". Stick this cloud (Ctrl + V on the PC).
  2. Here is where my lack of knowledge of the EP will show, you may need to do things a little differently in this program. Now, you have two layers on the plane, Image, the background and the "cloud" layer, which will be désingé layer 1 (can be changed to 'Cloud' or maybe 'cloud 1,' If you will add more.)
  3. You will probably need to adjust the size and placement of the cloud, then press Ctrl + T to call free transform and you will get a Bounding Box with an anchor Point and handle on the bounding box.
  4. Click on + drag inside the bounding box to move the cloud and click on + drag the handles to resize the layer of cloud. To limit the proportions, hold down the shift, while the click + drag one of the corner handles.
  5. When you have the cloud layer where you want and size to suit, Dbl-Click within the bounding box to the Committee of your changes.
  6. Go to Selection > load selection, and by default, it should be 1 layer (unless you renamed) transparency. That's what you want, and if not the value by default, use the drop-down list to choose which.
  7. This will load the selection used to copy the cloud, but if you resized and moved from the layer of clouds, will automatically make such changes to the selection. Here you get the "mobile dash" selection.
  8. With visible ants, go back to the selection and choose Save selection and here, use the drop down menu to get 1 layer (or the name of the layer of cloud) layer mask.
  9. In the Palette layers, you will get a new icon of layer mask in the layer of cloud.
  10. Click on this icon of layer mask to make it active. Note that the colors in the Toolbox will change to black and white. If they do not, then you do NOT work on the layer mask. To verify that you are, go to the Palette layers and make sure that the layer 1 (or layer renamed) layer mask is active in the Palette layers.
  11. Use a soft brush and paint, or rear (black paintings in and white paints on) the layer mask to clean things around your cloud. You can switch between black and white in pressing X. work slowly and don't hesitate to decrease the size of the brush to approach the cloud. If you make a mistake and got beyond the point where Undo (Ctrl + Z on the PC) works, don't worry. You have NOT done something for the pixels in the layer cloud, but ONLY the layer mask. Just paint in, or paint this intervention on the layer mask.

  You can go the background layer and work on the color of the sky box, so that it can match with any area of sky in the cloud layer. To do this, select the aircraft and reverse this selection, in order to protect the aircraft of any color or change of the density.

  If you have more clouds to add, simply repeat the process for each of them. Especially with more of a cloud, I would definitely rename the cloud layers, so that you know which layer and masking layer, you are working on.

  If PSE is not layer masks, or their operations may differ from the above, post on the forum PES and don't forget to add my instructions for a PSE user you can specify where things stand in PSE.

  Good luck

  Hunt

• help required for cisco nexus 1000v

  Hello

  I have three esxi host in my environment and I want to integrate these hosts with cisco nexus 1000v switch.

  I installed vsm on host1 and adding the remaining host via vsm Update Manager. exchanges I have already create in SMV shown in the welcome that I've added to the vsm, but the port group is not shown on the host1 esx on which I have installed vsm, should I also add the host that contains MSM in the cisco nexus switch?

  I want to say that I have installed the MEC on any army three esxi. is it good?

  Hi Mohsin,

  Where did you read that? In the past, we have added the guests, including one who executes the VSM. Usually run us both VSMs (primamry and secondary) and add anti rules affinity so that the two VSMs are on different hosts. I'm not a person CISCO, but having worked with CISCO engineers, we had no problem with what you have just mentioned. It would really be a waste of host in my opinion. I don't see why this could be a problem... As long as you have all your trade (PGs for your packages VSM etc etc) in place, you should be able to add all hosts in my experience.

  Follow me @ Cloud - Buddy.com

• Facebook blocked: something about a black or white list blocksite?

  How can I add facebook to a whitelist?

  I get an error message when I try to open the page: something like this site, or items, therefore, on a blacklist of blocksite (or not on a white list)...

  (I was block adds on fb more earlier; maybe that's how he fell into a blacklist?)

  I'm no computer expert, so all responses must be simple and clear, with more details that you want to use for a more informed user.

  Thank you!!!

  Kate

  Hi katecwatt,

  Mozilla Firefox is currently one of the fastest and most popular web browsers in the world. Measure of the million daily active users, Firefox highlights promising free thousands of Add-ons to make your experience fun and safe surfing. One of the best Add-ons is the 'BlockSite"allowing its users to block / unblock websites at any time.

  The add-on "BlockSite" is a free extension for Mozilla Firefox with an easy black access list. From here, you can manage the sites you want to block once and forever. Sounds interesting?

  Here's how to block websites in Mozilla Firefox

  the category of elements of the strategy of the custom (with page custom URL categories) and the L4 ... Therefore, you may need to configure the browser pop-up blocking settings in order to use the ...

  http://blog.didierstevens.com/2007/07/03/the-BlockSite-Firefox-Add-on/

  http://voices.Yahoo.com/how-block-websites-Mozilla-Firefox-7843204.html

• is the new photosmart 5524 ok for my new hp 14 chromebook

  page asks the email address for the new printer.

  can I use own email or can I just make a new one for the printer only?

  Hello bppartner, welcome to the Forums there.

  I understand that you are eager to use your Photosmart 5524 with Chromebook and have a request by e-mail. You can use the e-mail address of printers. Please see the link below which helps to start.

  Getting Started with Google Cloud Print - click on add Cloud Ready printer - HP, on the left side of the page - click on click on the HP registration under installation instructions page

  I hope this helps!

  Take care

• 3050 vs 3059

  I am interested in buying a 3059A deskjet all-in-1 printer. This machine does exactly the same characteristics as a 3050? If not, why 3050 related research results are returned from qyuering ' 3059 ", including a guide to 3050? What are the differences?

  Hello

  The HP Deskjet 3059 A belongs to the 3050 series (J611) a.

  Compare the HP Deskjet 3050 (J610 Series), the only differences are the web services.

  J611 series adds cloud like ePrint features (printing from anywhere using an assigned printer e-mail address) and AirPrint (print directly via LAN built into Apple iOS devices).

  Other that those features of the products are identical, you can find below:

  http://support.HP.com/us-en/document/c02105426

  Shlomi

• Since the new downloaded drive, display a pdf file was DOWNGRADED.  The color contrast is terrible and the quality of the screen reminds me of the first BACK operation displays. Help!  I want the quality looks an old back!

  Since the new downloaded drive, display a pdf file was DOWNGRADED.  The color contrast is terrible and the quality of the screen reminds me of the first BACK operation displays. Help!  I want the quality looks an old back!

  To add to this miserable viewing experience, we cannot even e-mail Adobe to communicate this déclassé experience.  We are forced to complain to others.

  Who knows of another pdf viewer application which is better (for viewing - what are the tools when he drove you nuts just to see your documents in Adobe reader?)

  Well, finally found.  Go to the edition/preferences/display Page.  Under "Rendering: smooth text", choose "for computer/laptop LCD screens". "  Do not know why the default value is set to 'none', which gives you this mess / hard to read test.

• vCloud connector configuration

  Try to get vcloud connector plugin configured, seems simple enough, but can't seem to add my vCloud Director cloud.  Get "impossible for < URL > connection of the clouds.   I guess the cloud name is generic and cloud url must point to my VCD Url, but it should include a string Org or can the location of the system at a higher level. I couldn't get either to work and can not find any docs so appreciate the pointers.  Thank you - ken s.

  Here is the User Guide:

  http://www.VMware.com/PDF/vcc_10_usersguide.PDF

  You can also access it and other useful information such as articles Release Notes & KB on the right side of the product download page:

  http://downloads.VMware.com/d/details/VCCP/ZHcqYnRkZXdiZCpldwis

  To directly answer your questions:

  -Cloud name is what you want

  -Cloud URL is the URL that you use regularly to access your vCloud from the browser

  If the vCloud uses a valid SSL, do not uncheck the 'Ignore SSL certificate' option in the dialog box add clouds.

  If the vCloud is outside your firewall, you must use proxy to connect to it. Haven't you set up that already?

  Thank you.

  Patrick Chang

  Product Managment, vCloud connector

• Peut liquid/Alternate one-way to double page layouts

  I am creating a portfolio for my ipad and I have not "been able to find a way to do it.

  What I want to do is:

  If I have a portrait page with 2 images of landscape on this subject.  I want to rotate ipad to landscape and have these two images become two separate pages.

  The only way I can think to do is to double the pages or mess up the order of count of pages so that when the next page was turned, it would not correspond with the right image.

  Thank you!

  I suspect that this is a matter of DPS, and it is requested before. No, there is no way to do what you want and to be honest I have no idea why you want to do it this way.

  Dual orientation is, IMO, a waste of time and effort, and to do what you describe adds nothing to the reader experience at all.

  Save yourself the aggrivation and choose a direction and pour your effort in which using MSOs to allow the reader to commit to enlarge the images.

  You can follow in the DPS forum.

  Bob

• icloud applications do not start

  Why is this so complicated cloud of Adobe download experience.  Have downloaded successfully, why it will not open.  I already had the trial and the files are on the desktop, but now can't open application unless it indicates the license number.

  Thank you.  Finally, after 4 hours, I went to Safari instead of Firefox as there seemed to be a glitch in the confirmation e-mail. She sucks that weekend, there is no direct people talk to him.

• Lightroom 4.2.  Cannot import. message files were not imported because they cannot be read

  Crisis of Lightroom:

  suddenly, impossible to import images into lightroom - a window comes up that says '"suite of files not were not imported because they cannot be played'. I was trying to import images - 10 images were imported from the shoot, then import stopped.

  I tested the card and card readers using cards of different cameras and using different card readers. I managed to import the images into a folder on my desktop, so know nothing is corrupted... Memory cards are good, my card readers are good. no settings not changed in my camera. Nothing has changed in my routine. Have been using lightroom for several years.

  I import via a card reader, convert to DNG and save on an external hard drive. All very ordinary.

  No, I contacted has had or knows someone who has had this problem.

  Impossible to get in touch with anyone at Adobe.

  Thanks for any help or direction to support tec

  Barbara Nelson

  [email protected]

  On a quick reading, it looks like the same question that me was dead in the water for 7 days. (LR 4.2)  I tried everything - my card readers are good, memory cards are not damaged, tried different cards of different cameras, etc. Working my way through all of my tech savvy friends and professional, I've been lucky to connect with a person of great sister tech at Adobe.  After all the possibilities of lightroom (3 hours on the phone) in case of problem, we checked my external hard drive where all the images are stored.  Though even the external hard drive had plenty of space and "told" that he was in good health and works well, Adobe got go in properties/tools of the external hard drive and do a 'error checking.  12 hours later after the program has the file to a disk at the same time, he finds errors, moved to a separate folder, and now everything works OK.  Hard drive not to was not crushed or if all images have been lost.  As can happen after a while there was a scratch or similar which prevents more images being write (or read) on the disk.  Even if everything works OK at the moment, I'll replace it my external hard drive (and it's backup external drive) .just cases are more 'bumps' on the external hard drive.

  My technical knowledge is limited and I'm not intuitive that anything digital, so can't add more information then the experience I had.

  Barbara Nelson