Add ISDN BRI service on the 2911 voice router
Dear all,
There is a Cisco 2911 and ISDN BRI service in the test lab, and we would like to integrate the Cisco 2911 router ISDN service.
Should purchse the wan 1 port bri ISDN interface card or interface card 1-port analog modem?
Please let us know of any experience or advice.
Thank you very much.
Best regards
Ben Lai
It is very good. Then go on a BRI card
Tags: Cisco Support
Similar Questions
-
How to add a Service to the finder?
Creates a workflow in Automator and registered as a service (creating thumbnails of a set of jpg images). In the old OS X, I could copy the workflow in system/library/services and use it by right clicking on a .jpg document. However I'm unable to add such a file in this folder in the current OS X El Capitan 10.11.5 (even though I am the administrator and the only user on this MacBook Pro (retina, 13 inches, early 2015)).
In addition, I am also unable to add a service to the system preferences / keyboard / shortcuts, services.
Can someone help me?
You may not copy anything to/System/Library/Services in El Capitan because he is protected by the Protection of the integrity of the system. Should not be necessary, because your services normally live in ~/Library/Services /. The method to achieve this is to use Automator to create a "Service".
and it will be installed automatically for you in the Services Menus.
C.
-
I'm trying to set up my fax machine! My windows fax component service won't let me add says insert xp disc which I did not and said look these files H:\WXHOEM\i386. Please help me
Since we don't know anything about your system, I'll give you some instructions which will work for XP Service Pack 3.
To install the fax of XP with no CD Service, download the version of Service Pack 3 to XPFax.zip since my SkyDrive and extract/unzip the file in a folder on your desktop or somewhere on your system to a folder name, you can remember (there are 35 files in zip archive).
During the installation of the XP Fax Services and it asks you your installation CD, change the location of the file to point to the folder where the 35 files on your system. Whenever the installation asks you for a file on your CD, change the location to look in the folder XPFax, until the installation is complete.
Restart and test.
Here's how to get the file XPFax.zip from my SkyDrive:
I downloaded a copy of XP Pro SP3 files you need on my SkyDrive (everyone has a SkyDrive for file sharing).
Here is the link to my SkyDrive and you can get the file you need here:
http://CID-6a7e789cab1d6f39.SkyDrive.live.com/redir.aspx?RESID=6A7E789CAB1D6F39! 311
When you see the files available for download, you will not see the file extension (.exe, .dll, .cpl, .sys, .zip etc), but when download you them they will have the right extension (most of the time).
When you download the file (especially if you use Internet Explorer), when you get a chance to save the file, it cannot save the file with an extension (such as .exe, .dll, .cpl, .sys, .zip, etc) then you will need to manually add the extension appropriate to the file when you download the file before you save it.
You can download the file without the extension, and then rename the file to add the appropriate extension. You don't want to use a file called XPFax when the name of the file should really be called XPFax.zip (if the downloaded file has no extension you will need to change the name of the file to add the appropriate extension to run).
-
I can't print from my computer. This has happened with no other visible defects on the computer or the printer.
When I use the printer in case of problem, and hit the 'add printer' link, I get the error message "print spooler service is not."
"I did a search on"print spooler"but got no result
Duane
Often, but not always, the symptoms you describe are caused by a corrupt print job stuck in the queue or a damaged printer driver. However before you clean things up, on general principles, that you can download, install, update and run full scans with each of these two free programs:
AntiMailware MalwareBytes
SUPERAntiSpywareDo not operate the two scans simultaneously. Each will take a long time, so start it and then go do something else for a while.
Cleaning of printers
NOTE: If after completing step has the print spooler is not always running after you launched the command "net start spooler", you will not be able to follow all the steps in "First Article". Instead, go to the other link and download and get and use the utility 'cleanspl' such as described here.
If the suggestions below do not resolve your problem, after back and don't forget to include the following information:
- The version of Windows you have, including service pack (start > run > winver > OK)
- The brand and model of printer you have (includes the manufacturer, model and model number, as in HP Deskjet 6800)
- How the printer is connected to the computer (parallel, USB, network, wireless, etc.).
- It happened just before this symptom started
- What application antivirus you have and if your subscription is up to date and has been maintained continuously
- The full text of the error messages related to printing, without paraphrasing
A. Clean on print jobs pending
- Open a command prompt window (start > run > cmd > OK)
- Type the following in the black command prompt window, and then press ENTER after each line
net stop spooler
del/q '% windir%\system32\spool\PRINTERS\*.* '.
net start spooler
outputB. clean the old printer drivers and install the latest drivers by using the directions in One Article. If you have (or had) a Lexmark printer, follow the instructions on the following site before installing the new drivers, as explained in its first Article: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm
-
The use of concat to add a new service
Hoping someone can help.
Someone can help me with the sql required to add a new service to my existing services.
Currently I have the following text:
Select Q'[alter system set service_name ='] ' | name | Q'[',]' services $ v
2 where name! = 'SYS % ';
Q'[ALTERSYSTEMSETSERVICE_NAMES ='] ' | NAME | Q'[',]'
--------------------------------------------------------------------------------------------------
ALTER system set service_name ='xxx. ORADB.xxx.xxx',.
ALTER system set service_names = 'xxx.oradb.xxx.xxx',
ALTER system set service_name = "xxx_patch."
ALTER system set service_names = 'xxx.oradb.xxx.xxx',
ALTER system set service_names = 'xxx.oradb.xxx.xxx',
ALTER system set service_name = "xxxx7."
ALTER system set service_name = ' SYS$ BACKGROUND. "
ALTER system set service_name = ' SYS$ USERS. "
Obvilously I edited out, but what I need in this case is for the output services appears on a single line:
"xxx. ORADB.xxx.xxx ',' xxx.oradb.xxx.xxx ',' xxx_patch ',' xxx.oradb.xxx.xxx'... and so on.
Is this achievable in sql?
Use LISTAGG. Also where name! = 'SYS %' is false - use AS:
Select Q'[alter system set service_name ='] '
|| listagg (Name, ',') within the Group (order by name) | Q'[']'
Services $ v
WHERE name is like not 'SYS % '.
/
SY.
-
How to add THE web service to the ACL?
I want to access a web service from a PL/SQL procedure (using UTL_HTTP) since a 11g R2 database. However, before you do anything, I need to give access to the web service by adding the web service to the access control list (ACL).
I want to test the web service is full here: http://www.service-repository.com/service/overview/-1789095104
This is a free WS, you can use to test the code WS. The endpoint is http://www.w3schools.com/webservices/tempconvert.asmx
Therefore, adding www.w3schools.com to list ACL will be fine, I think? Am I wrong?
I tried the method below but I get this error and the user guide is not clear what to do.
SQL > exec dbms_network_acl_admin.assign_acl (LCD = > 'temp_ws1.xml', host = > 'www.w3schools.com');
BEGIN dbms_network_acl_admin.assign_acl (LCD = > 'temp_ws1.xml', host = > 'www.w3schools.com'); END;
*
ERROR on line 1:
ORA-31001: handle or path of the invalid resource name ' / sys/acls/temp_ws1.xml '.
ORA-06512: at "SYS." DBMS_SYS_ERROR', line 86
ORA-06512: at "SYS." DBMS_NETWORK_ACL_ADMIN', line 94
ORA-06512: at "SYS." DBMS_NETWORK_ACL_ADMIN', line 479
ORA-06512: at line 1
Any help would be greatly appreciated.
This,
host-online "www.w3shools.com."
is not the same thing as this,
host-online "www.w3schools.com".
-
How to add a shortcut to add speech recognition to type the username on Vista Start
As a disabled person, I use Dragon NaturallySpeaking to run a computer most of the time.
Right now I use a mouth stick to type at first upward, and I would like to be able to add an icon to start the program so I can enter a login with voice.
Thank you...
Justin
Hello
Windows Vista comes with the speech recognition integrated program with which you will be able to work on the computer without using the keyboard or the mouse.
Reference:
Use speech recognition to operate windows and programs
Set up your microphone for speech recognition
http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-your-microphone-for-speech-recognition
Unfortunately, you won't be able to connect using speech recognition. I suggest you use your favorite search engine to look for software that supports the feature.
Note: Microsoft cannot guarantee that problems resulting from the use of third-party software can be resolved. Software using third party is at your own risk.
See also:
Accessibility in Windows Vista
http://www.Microsoft.com/enable/products/windowsvista/ -
Windows search Windows failed to start the service on the Local computer
OK, so it's a big, dirty and convoluted issue, so please bear with me. Any help is greatly appreciated! I start tearing my hair out on this one...
I'm on Windows 7 Professional 64 bit
UAC is set to the lowest level 2The other day I have problems with the search box in the start bar. It is more was to find excel or other office applications and also he wouldn't orders base as cmd or Notepad. Whenever I run a command it returns an error like this (not exact because I have the exact error message):
Windows cannot find ': search query = cmd'
I searched a little and tried to rebuild the index in Control Panel > Indexing Options. It does not work so I uninstalled Windows Search and reinstalled. What I found now, is that the indexing service would not start and if I tried manually start from services.msc I would get the following error:Windows search Windows failed to start the service on the Local computer
Error 161: the specified path is not validThe event log showed me this Application error:
Cannot initialize the Gatherer service.
Details:
The Temp folder is on a drive that is full or inaccessible. Free space on the drive or verify that you have permission write to the Temp folder. (HRESULT: 0 X 80070660) (0 x 80070660)
Help!
Thanks Samhrutha.
Your proposed solution of editing the registry is the only solution I found to this day and still work.
The only drawback that I want to emphasize is that this fix causes completely reset to its default settings of windows search. Customizations to search what have been done by the user (e.g., windows search indexing user customizations options) will be lost.I am running Windows 7 Pro 64-bit and occasionally experienced the same error message ( windows cannot find ': search query = XXX ", where XXX corresponds to my search query) try to search through windows when start menu search box.
Only recently, however, discovered one other cause possible/fix to this problem.
Specifically, I discovered that the error of windows search resulting from the ADDITION of a NETWORK LOCATION on the local computer (for example, via the menu option "Add a network location" that appears when you click the file menu in a window of windows Explorer displays the contents of the local computer (corresponding to the "COMPUTER" icon). The CENTER of my computer SYNC settings have been defined to disable the synchronization of network or file 'offline' and I suspect that this setting is also part the cause of the error of research.To resolve this problem, simply tell windows search not to include the 'network' location in the search index. To do this, one needs to access the settings of the windows search INDEX LOCATIONS (via Indexing Options-> change), then uncheck the box next to the network location (which on my computer starts as follows: oneindex: / / {s-1-5-21...)
After unchecking this box, click on the OK button and then CLOSE the button to exit the Options of Index window. After that the error message should hopefully not return. If so, try restarting the computer and research to test again.
Hope this helps!
:)
~ rx
-
For another interface ISDN Bri ISDN bri backup
This is probably a stupid question
But if you wanted to save an ISDN Bri ink with ISDN another link what would be the best way to go about this?
Thanks in anticipation!
I think that practically all the variants that are normally considered to establish the backup of an interface are possible:
-backup interface would work. The normal warnings on the impact of the backup interface apply. If, in doing so, it may be preferable to backup on a dialer that interface return upward at the IRB.
-floating static routes might work. The challenge with floating static routes is that primary BRI is not likely to go the Protocol which is what triggers usually floating static. So to work around this problem, you want to use the new feature of reliable static routes with the purpose of follow-up.
-Watch Dialer would work. I woule think this might be the best choice in your situation.
-If you use OSPF as your routing protocol configuring ISDN as Circuit request would probably be a reasonable way to get the second ISDN to back up the primary.
Decide which option is best depends on your particular situation that are actually needs. I don't think that it is possible to give a general answer that would cover all cases.
HTH
Rick
-
The service that manages faxes in the unit actually changes the faxes to something like IPM message class. Note.Fax?
Yes, when he sticks the message in the Inbox, it sets the message class and various other MAPI extended attributes such as media flags and others so that the unit will pick it up as a fax to the phone.
NOTE: We need to free the fax service IP updated current week if QA says it's OK - he has the ability to route inbound and outbound IP faxes and route incoming emails with attached as voicemail WAV files (that is, it will define the appropriate MAPI properties and report it as IPM. Note.Voice.Unity such as the unit will resume as a voicemail message). I drop a note here about it as soon as he is ready to roll.
-
Subject of the vlan voice SRW224G4P
Hello
I have configured the SRW as vlan, use vlan for voice 212, 348 for data and communicate with cisco IP Phone.
database of VLAN
VLAN, 210-216 345-348
output
ID of the vlan voice 212!
!
interface fastethernet1
activate the storm control
Storm-control broadcast level 10
Storm-control include multicast
maximum port security by 10 points
port security mode max-addresses
port security throw trap 60
spanning tree portfast
switchport trunk allowed vlan add 212
switchport trunk vlan native 348
macro description ip_phone_desktop
! next order is internal.
macro auto smartport dynamic_type ip_phone_desktop
!but when I show vlan voice,.
It shows:
=====================================
1ASW01 #show voice vlan
Manage the VLAN voice State is automatically triggered
Operational status of VoIP VLAN is enabled in auto
Best Local Voice VLAN ID is 212
Best Local VPT is 5 (default)
Best Local DSCP is (by default) 46
Concerted VLAN voice is received from the 34:62:88:73:05:c9 switch
Concerted VLAN voice priority is 0 (static source active)
Concerted Voice VLAN ID is 216
Agreed VPT is 5
Agreed DSCP is 46
Voice VLAN agreed last change is 3 May 13 05:06:31=====================================
I don't know why the vlan 216 became the vlan voice?
I tried changed the build-in macro settings,
auto macro of the built-in parameters ip_phone $native_vlan 348
auto macro of the built-in parameters ip_phone_desktop $native_vlan 348but the system could not change the value of $voice_vlan.
How to fix?
Hi Skywings,
So I think the above output is after the change, right? If this is true, it seems that something was wrong during the configuration process. Process of VLAN automatic voice has two main phases where one is related to communication between the switches and other Cisco infrastructure devices and synchronization of voice VLAN ID. The second phase is related to the identification of the end device as phone. What I see in your case that the first phase has failed somehow the voice VLAN ID is different from locally configured. Can you share with me your race and also start-up config more CDP neighbors? You can use private message.
Kind regards
Aleksandra
-
Configure the VLAN voice and data in CISCO SF 300 8 P
I have a couple of Cisco SF 300 8 P and P 24 switches. I have voice and data VLANS configured as:
Data VLAN: default 145.17.59.0/24
Voice VLANS: VLAN 20 172.22.20.0/24
I have different DHCP servers regarding the data VLAN, we have a physical server that is configured for 145.17.59 * extended IP and Voice VLAN DHCP Server is configured as a router gateway with option 150.
This configuration works very well with other cisco 2960 switches and 3750 etc. except CISCO SF 300 8 P and 24 p. I tried to set up the voice and data VLAN in these CISCO switches so that phone CISCO (model 6941) should get IP of the VLAN voice and PC should get the IP address of the DHCP server on the data VLAN. I tried several techniques such as LLDP, Port-to-VLAN Config etc.
Can anyone please guide me / help on this.
Kind regards
A K.M.SayeedHi A.K.M., with Cisco phones you should be able to define simply automatic voice VLAN to be VLAN20.
ID of the vlan 20 voices
You must ensure CDP or LLDP is enabled as well. I would check in the web GUI. DHCP for phones can come from a DHCP server on a port access VLAN20 switch, or you can use dhcp for assistance to redirect DHCP server elsewhere.
If you prefer or you have problems with the CDP or LLDP, you can also program the ports as trunks and add the tag VLAN 20 for them. In this scenario, you need to ensure inter - vlan routing works and phones that download the file config with corrrect VLAN config.
These switches do not run ios, so they are similar, but different from the catalyst switches that you mentioned.
-remember messages useful rate.
-
Help, please! Remove the audio only pre-existing to make the new voice overs.
Greetings,
I made a video which is an advertisement for a company. How to add subtitles, I want remove the audio from the middle of the video and then create new voice on audio. I looked through the forum and did not find any discussion on eliminating only part of an audio segment and the creation of new audio to replace what you deleted. Please let me know if you have any advice or tips. I'm serious need assistance. Thanks in advance!
Thank you
Reid
Someone I messaged on another forum and provided the shortcut "command + K. Seems to work so far. Thanks for any help.
-
How to see the headers added by the service of the company in OSB
Hello
I configured the custom policy and the service account for the business service. This is the message digest of user name and password.
I called the Sales Department of the proxy service. I do not see the headers are filled in the $outbound or the headers when you test the test console service.
Do we need to explicitly add soap headers in the message flow or will business service can take care of him also how can we see the headers?
Concerning
SOAP headers will be updated in the service of business. No need to do anything in the pipeline. If you want to see the headers put a monitor tcp between the commercial service and the web service (called of business).
-
Add fron host so that the upgrade to ESXi 5.0 and 5.5
Our ESXi environment consists of four hosts with VCenter server with a network SAN EMC e. It's all about 5.0 but, I am about to upgrade to 5.5 and add an additional host at the same time. Here are my questions.
1. can I save the config on an existing host and change (hostname, IP, etc.) to import to the new host? I've not seen a way to edit the configuration file once I have to export it as a backup. The only way that I can get is to browse the data store, take the txt config file and import that once the new host is turned on. I make a mountain out of a hill of mole too think this?
2 shooting. me in the foot if I bring the new host online 5.5 along side the existing hosts to 5.0? The reason for this is because resources are tight on the four existing hosts and I can ' t vmotioin all the machines virtual it which means I have to close the servers... If I can bring up the new host 5.5 that would allow me to put up-to-date without significant interruptions in service.
Thanks for the comments.
Tony
- According to the number of servers that you want to install, it can be easier and faster (and more supported) to just manually configure settings, unless you use Enterprise + licenses that provides profiles of the host.
- Basically, there should be no problem with the new hosts v5.5. However, do not forget that the fist you must update vCenter Server to v5.5 to add v5.5 hosts...
André
Maybe you are looking for
-
I have a cluster of Boolean controls on my front. I want to manipulate the properties of these Booleans to a Subvi. I sent the RefNum of the cluster to the Subvi and want to seel a group of disabled properties. I found that I only see a property of t
-
How can I get the index of the current pulse model vi?
I would like to be able to see the current index pulse model vi. According to the help of Labview, a pulse is generated whenever the entered delay (d) is equal to the index (i). Is it possible to get the current index that the vi is on? If so, how co
-
Error message: iecont.dll and iecontlc.dll are missing?
Original title: where to go when the file version and iecont.dll iecontlc.dll are absent? need to know where to recharge the missing files
-
Original title: my Media Player will not play the majority of my music files. Here's what he said "Windows Media Player cannot find the file. If you try to read, burn or sync an item that is in your library, the element can point to a file that has
-
Upgrade windows vista to windows 10 without paying?
I am currently using windows vista. Is there a way to upgrade to windows 10 without paying?