Adding a 2nd, 3rd etc. to formula entry

Similar Questions

• XY-Graph / plot of legend: how to detect changes in the 2nd/3rd/4th... placement of the legend

  Hello

  I have an XY Chart with 4 slots. How can I detect, for example, the color of the second plot change in the legend. Active plot, using a property node, is always drawn 0. So I'm not able to detect changes in the 2nd/3rd... plot.

  Any ideas?

  Thank you very much.

  Best regards

  Michael

  You can do it with a structure of the event.

• Windows 7 Professional does not start upward when adding a 2nd hard drive is stuck on the windows logo

  I try to add a 2nd hard disk - a disk seagate 1.5 to - win7 will not start - stuck - up when I connect the drive.

  I have another drive, a 160g WD drive - it starts ok w / that a connected.

  Why is it ok w WD drive / 160g of starter, he recognize etc ok but won't start w/1.5 tb seagate drive?

  both are sata drives - connected to the same sata port when I try of their

  "richiedude4444" wrote in message News: * e-mail address is removed from the privacy * .com...

  Nevermind - I found it for my # model/serial

  fact firmware uupdate and still win7 crashes at startup looks like I got a new seagate brick.

  As it is a new drive and is under warranty, contact Seagate for replacement.  Any company can send a piece of equipment DOA.

• Adding a new 3rd SAS 300 GB disk for ESX 3.5

  What I have:

  1 Dell R160 - ESX 3.5 Server

  2. two hard disks 300 GB SAS - RAID 0 (I need not redundancy)

  3. 2 300 GB drives form 1 Virtual Disk capacity VD0 about 580 GB

  Requirement:

  Now, I bought a new SAS 300 GB HD which I want to add to the already existing ESX configuration. I want this 300 GB for the 2nd (MON) datastore again so that I can create a few more VMs on this data store. I don't want to re - install ESX installation complete (if possible)

  What I tried:

  1. a way that I can create a new ramdisk on this 3rd 300 GB SAS HD so that I can add it to the ESX via VM Infrastructure Client data store. -Does not work: (.) Also simple plug-and-play of the drive does not work as the ESX is not able to scan the HD if I simply just add it on the drive and run ESX

  I am a newbie so please let me know if you guys need more info to solve my prob.

  Thank you.

  Vik

  SAS - Ready 300

  This drive must be online.

  Create a new VD using RAID0

  André

  * If you found this device or any other answer useful please consider awarding points for correct or helpful answers

• Instant ink: adding a 2nd activation code

  I signed up for the instant the ink program when I found the $9.99 / month package registration on clearance for $1! Can I buy more than one kit and add it to my account to extend my subscription to save money? Or I would be able to cancel and then re-register with a new code?

  Hi @Karenkevin16.

  Welcome to the Forums of HP's Support. I understand that you have a question about instant registration ink kits. I would like to help.

  The registration kit is used to configure the instant the ink account. Additional registration package can be added to the same account. It would be nice/neat, but it was not designed to work this way.

  As for the second idea... I have to say maybe. Yes, you can register with a key code and then cancel and re-register with another key. In theory, this will work. I don't know if it will work.

  Another thing to keep in mind is that whenever you sign up you will receive a welcome kit. There is a full range of ink cartridges. That more ink will be sent when triggered by the printer. This could lead to a lot of extra ink on the spot. You can always send back extra ink.

  Here are some links to documents that can help out you.

  Printers HP - Instant ink HP registration

  Ink HP Instant - cancel your Instant Service of HP ink

  Let me know if this helped you in some way. If it did, that's great! Give us some reinforcements by pressing buttons of solution and laurels, that we will help and others see that we have the answers!

• HP Envy 17 t-n100 (NOU68AV): adding a 2nd SSD to a HP Envy 17 t

  I installed a second (PNY CS1311 960 GB) SSD in my HP Envy 17 t, which is not always recognized.  After the initial installation, I could see in disk management, create a new simple volume and mount it as a record.  Everything worked well.  After the first reboot, the volume was missing and I was unable to find it in disk management.  I removed the DDI and connected using a USB/SATA cable.  The volume is good, so I figured that the internal SATA cable was bad.  I ordered a new one and installed, but the drive has not yet been recognized.  I double checked the cable and it was installed correctly.  After a few reboots suddenly the drive has been recognized again.  I was able to use the volume until the next reboot, when he disappeared again.  Any idea what might cause this behavior?

  I cloned the original 1 TB 5400 RPM HARD drive on a new CS1311 of PNY 120 GB SSD.  I wanted to have the OS and applications on the 120 GB and add the PNY CS1311 960 GB SSD in the 2nd Bay for all my other files that I also have off-site backup.  Given that the laptop can see the 2nd occasionally by car, I cloned the original HDD to the 960 GB SSD.  The laptop works fine with just the 960 GB SSD in the first Bay.  This isn't the configuration I wanted, but it will work.

• Adding a 2nd disk to K210

  Hi, I would like to add a 2nd HDD to the K210 and would appreciate if someone can advise me please WHAT type of HD, I need and what cables are required?

  Thank you

  Bob

  http://www.DesktopReview.com/default.asp?NewsID=639&review=Lenovo+IdeaCentre+K210

  Open your case if it has the same appearance as in the image, you will need a sata hard disk when you buy the disk hard do not forget to buy the sata cable

• ENVY of HP DV6 7214TX: want to Hp Dv 6 stuck on restart the notebook after adding the 2nd drive hard trolley

  I do not use blue ray. so I bought a new SSD. I put in the main area of the hard drive in the laptop and put the 1 TB hdd disk in the 2nd drive hard carriage and insert it in place of blue ray player.

  Everything work fine except one.

  Whenever I restart the computer it's stuck on the first screen on reboot.

  It doesn't happen when I stop the computer. When I hit the power button, it starts up fine. but on reboot it still stuck on the first screen.

  is my 2nd carriage of failed hard drive or there is another problem.

  Its pretty weired tha on turning off the system starts, but on reboot it stuck on the first screen after startup

  Any ideas what solutions are

  Thank you

  Fassi Fihri

  Hi @FarooqAbdullah,

  Thank you for visiting the Forums HP's Support and welcome. I watched your problem on your laptop dv6-7214tx HP ENVY and issues with a start with your new SSD. You can reset the BIOS with this document by selecting the reload the default BIOS settings. Who has helped others as she seeks the new SSD.

  Note Remove all USB devices. Disconnect all devices of non-essential, as these can cause some problems.

  Here is a link to the HP Support Assistant, if you need it. Simply download and run the application and it will help with the software and drivers on your system.

  I hope this helps.

  Thank you.

• 7010 OptiPlex desktop computer - adding a 2nd HARD drive?

  Is there place, in the case of funds 7010 for a 2nd hard drive?  And any other necessary mounting material is none other than the screw, then an additional SATA cable?

  Thank you

  Robert

  Bardi

  There are four different versions of the Optiplex 7010, Mini-Tower, desktop, Small Form Factor and the Ultra Small Form Factor.

  Assuming you have the desktop version and not the minitower.

  The desktop version, can support a 3.5 "or 2 x 2.5" SATA drives.

  You will need a basket of 3.5 "x 2 x 2.5" hard drive, plus one SATA data cable and possible a SATA Y power splitter.

  Bev.

• How can I run two disk hard of (adding a 2nd hard drive) on the flag a1020n?

  How to do two hard drives on the a1020n Pavilion, after adding a new hard drive for my existing CPU?  My old hard drive is out, so I will install a new hard drive, redefinition of the new hard drive, but I still want to have access to the old disk until I have transferred all my personal files to the new drive.  I saw answers to self-help.

  Yes. I often throw in additional disks other PC as a second drive... just give Windows a minute or two to find and configure the drives after their installation. You can use the Explorer to browse the file structure.

• Adding a 2nd HARD drive to my 9270 t-cable included already?

  I would like to add a 2nd HARD drive to my t 9270.  I jumped the cover and am fishing around, but I see no alternative power SATA cables.  I see what the data looks like spare cables transfer and I see spare power cables, but they are not SATA interfaces.  Before you start unscrewing stuff to dig deep or purchase cables that I may not be no need, I thought I'd post here.  Every computer I've had in the past has spare cables, at least enough to add a disc more than what came with the basic config.

  9270t comes with power and spare data cable so I can add a SATA HDD, or I'll have to go buy more?

  Thank you!

  Ross

  Yes, you will need another sata data cable.  Power is Prewired do not buy data cables.

  Here is the motherboard of your PC. It has sata ports 4 four in the lower right corner.  Two are on the edge and two vertical.  The black and white image layout will give you the numbers of labelling and the ports.

• Added that a 3rd car need help!

  I just added a 750 GB WD Caviar OEM HD to my pc so that it can handle all my movies

  my computer can see the HD currently unassigned

  My question is when I went to format the drive, it gives me the ability to create a dynamic

  disc not basic training.  I read that it is best to stick to the base and not go w / dynamic

  How to format this disk basic with windows xp pro?

  Help!

  
  

• adding the 2nd Time Machine disk backup capability

  I have a Mac pro OS X 10.11.5 with two discs devoted to the backup. When I wanted the first filled to the top, then add the second to continue archiving backup files.

  I don't want to lose my older archived data in backups on disk 1.

  What happens when I add a second drive to add capacity to the Time Machine backups?  Once the first drive is hard full TM then will use the second drive until it is full?

  When you add the second drive, I get a warning that the TM will take turns using the disc 1 and disc 2. But 1 disk is full. TM will not delete old information on Drive 1 to make room? If Yes is not good because I want to keep the old data. I just want to keep incremental backups to Drive 2.

  Please specify the feature.

  Yes, TM will continue to save on disk 1 and delete older backups and take turns with disk 2. If you want to keep 1 as it is by car, then you must remove it from the list of backup. Start a new backup on disk 2, and continue. In both cases, the disc 2 will make a new full backup of your computer.

• HP slimline 410-010: someone at - it added a 2nd disk to a 410-010 PC HP?

  I don't know what I need I don't see no records additional power from the power supply, or a place to plug in a sata pay-per-view cable... Thanks a lot for your help...

  Because this computer has only 2 sata data headers, it is implicit that you don't have the choice. He has No. secondary drive Bay. You might consider cloning from the old drive to the new.

• Pavilion laptop laptop 15-au20nl: adding a 2nd hard drive to computer Pavilion 15 laptop-au20nl

  Hi, I just picked a new Pavilion to the-20nl and I need to add a second hdd for my personal files for the existing SSD.

  Before you open the laptop, I would like to know if it is possible. Did someone just tried?

  Thank you

  Concerning

  Luca

  Hi @LucaV,

  Thanks for getting back to me with the information.

  Please look at pages 32-34 of the Maintenance and Service Guide.

  It has the hard drive part number and instructions to get the HDD and SSD.

  HP has continually enhances and modifies the components of the product. For complete information and up to date on
  supported parts for your computer, go to http://partsurfer.hp.com, select your country or region, and then
  Follow the on-screen instructions.

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.  To simply say thank you, click the Thumbs up below!

  Thank you.