Adding a 3 TB internal WD Green as an additional drive in a dc7900 CMT

Similar Questions

• My MacBook Pro was built in mid-2009, I understand that I won't be able to get the next Sierra of OS.  I just put a new hard drive 700 GB, more I added a new battery to include a new CD/DVD drive.  I spent more than 400 million dollars. What I need to by

  My MacBook Pro was built in mid-2009, a 2.6 GHz, 13-inch, I just put a new hard drive 700 GB and I added a new battery to include a new CD/DVD drive.  I spent more than 400 million dollars.

  I understand that I won't be able to get the next Sierra of OS. I need to by a new Mac?

  Talk to the people the more I would get if I turn in I'd get is about are about $ 100 million.  Please tell me it isn't so.

  If you want Siera you will need a new Mac, but you can continue to use the old one as long as you want.

• Adding hard drive in the optical drive in an Z210 CMT - method?

  Not obvious HP documentation exactly which carrier is needed to set up a standard 3.5 "SATA hard drive in one of the positions below the optical drive.

  HP parts list shows HP #619242-001 as carrier to achieve, but this part, judging by the photos, just doesn't seem right: large heat sink, a kind of connector built, etc. Also, of course, over $ 40 with shipping. Just to mount a drive?

  Am I missing something here?

  DRM for your help!

  Only HP number piece you posted actually represents a HP original Western Digital IcePack, which allows the conversion of an SSD 2.5 "or the hard disk in a 3.5 form factor" which exactly reproduces the form of a standard disk 3.5 "(including the change of accessories features/SATA power correctly to the left, and either in the middle of a Bay that may be important in some workstations).  Here's a picture of:

  

  If you have a spare 5.25 "Bay that you can remove the 'empty' in your workstation of Z, then here's the information you want about the device that accepts a standard 3.5" disk (or the IcePack 2.5"Drive Converter above).  This is the HP NQ099AA sled, which replaces the empty 5.25 ", and you can see from the image below that there's a front slit black plastic to allow the entry of ventilation.  It has a metal back slot to accept what seems to be the Green 3.5 "HP drive original holder that was used in the era workstations xw (slide in rear), and who will be included.  These types of 5.25 "era sleds Z generally works very well in the era post xw optical drive bays, also.  HP is one that accepts two drives 2.5 "in a sleigh (picture not included).  I bought some guys from Alan on eBay several times... good company.  Search on eBay for this code part option see more photos.

  

  

  I do not have a workstation Z like yours to compare to, so maybe you don't have a spare optical drive Bay to insert such an adapter in.  However, looking at the Z210 photos on eBay that looks exactly what you need.

  Hope this helps and let us know the results of others to take advantage...

• WD Caviar Green 3 to HARD drive reformatted not up to 3 TB... only get GB 786. Win 7.

  WD Caviar Green 3 to HARD drive reformatted not up to 3 TB... only get GB 786.  Win 7.  What to do to get it to fit TB 2.76?

  some discs 3to had a partition of 2 TB put on them at the factory to accommodate legasy systems.

  see the WD Web site.

• Adding a second HDD internal on a Satellite A350-20s

  I have a Satellite A350-20s.
  It is described in literature as having the possibility of adding an internal hard drive 2 "5 second and indeed it is a spot reserved for him...

  The problem is that when I remove the cover to insert the hard drive there is no connector.

  So, how to do?

  Hello

  Some of the units can be updated with a second HDD Satellite A350 and other laptop models. But this means that NOT all laptops offer the opportunity to upgrade
  There are different A350 with different hardware specifications
  All mobile phones support the same substantive coverage but not all motherboard supports a second HARD disk controller and the connectors.

  Your A350 cannot be upgraded with a second HDD due to the different motherboard and the missing HARD drive controller.

• problem adding more then 3 internal networks to VM

  We are trying to run the default workflow

  Liberary-> vCloudDirector-> VAPP-> virtual machine-> NETWORK-> add a NETWORK card

  
  in a loop for the addition of 8 networks internal, but it gives the following exception after crating of 3 internal networks

  "All possible network adapter addresses are in use (the dynamic Script Module name: calculateNextNetworkCardAddress #12).

  We have the version 8 material vm and we are guess, add 10 networks.

  you will appreciate your help in this matter

  Serach for action calculateNextNetworkAddress

  Change the following

  var availableAddresses = new Array('0','1','2','3');

  In something like this:

  var availableAddresses = new Array('0','1','2','3','4','5','6','7','8','9');

  And try again.

  Christophe.

• Adding a new HD internal for HP ENVY Phoenix 810 - 150se CTO desktop PC

  I just got my new computer later that yesterday, when I ordered it I refused for the additional disks because I have a nice new 2 TB drive already.  Then, when I opened the file to add the new drive, I was shocked to see that there are no additional data for additional cable after the market of readers to be connected to.  Is this a common practice of HP to only give me cables for readers that I ordered?  How HP that I add additional disks?  So if I buy or recover data from my last machine cables, can someone tell me where I need to plug into the motherboard.  Although I really like the computer, I am very disappointed in fo HP not providing no additional plugged the data cables to add additional disks.

  Jonathan

  Great, thank you VERY VERY much

• hardware device bluetooth usb green leaf 185032 falta driver

  El device detecta mi telefono pero no is you can connect e indicates that lack a driver

  Please select your language from the drop-down menu at the bottom of the page to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find the desired language, support for additional international sites options are by following the link below:

  Please, select su idioma in her lista desplegable anterior to send you in el idioma of choice su pregunta. El foro Québec ha published're para frances only. If usted no encuentra el idioma no desee por encima of las options para support otros destinos international themselves can find following el siguiente enlace:
  

  http://support.Microsoft.com/common/international.aspx

• In the browser, the title of my page is added with the word "Test" and my URL contains additional characters.

  Hello!

  When I publish my site on my server, the pages appear fine but my page titles all have the word "Test" added to them even if I did not use this word in the titration or by mentioning my Muse pages.

  Also, the URLS of the pages equipped with additional characters after the .html. I don't know what is the cause.

  Anyone know what is happening here and how I can fix?

  Thank you!

  

  See the clearer screenshot: http://screencast.com/t/6kEZHuQGOU0V

  Hello

  Go to the "Presentation" of your 'Page Properties' section of the master page and check if it says 'Test' in the section "prefix to the Page title. Check this short video to find out how to check it: http://jingsite.businesscatalyst.com/jing/2013-10-03_0258.swf

  On the suffix in the URL of the pages, I noticed that some pages have the suffix and some of them did not. In addition, the suffix charge only once the pages are loaded (therefore is not part of the URL). It may be related to a code that you have added to pages or the "HTML for the head" section of these pages. You can check this aspect once and try to remove the codes to check if these suffix disappear.

  I hope this helps.

  See you soon

  Parikshit

• PE T610 - Perc 6i - strange state after adding additional drives

  Hello

  We have a PE T610 with a PERC 6i controller.

  X SATA 1: 2 250 GB virtual disk in a RAID-1

  X SATA 2: 3 500 GB of disk virtual in a RAID-5

  We have added 3 additional 2 TB drives to the server.  A drive has been designated as a Global Hot Spare.  Two other readers have been added to the Bay RAID-5.

  I predicted, using 500 GB each among the readers added two for Virtual Disk 2.  Then, I had planned to use the other 1.5 to among the readers as Virtual Disk 3 in a RAID-1 array.  I did it with other servers in PE in the past.

  But after that the 500 GB is used from each of the discs, I can't used the remaining unused space.  It shows the 'available RAID disk space' as 0.00 GB.

  Why the remaining space on these disks is not available for me to use?

  Thanks for any help on this.

  Bryan Hunt

  «I've waited with 500 GB each among the readers added two for Virtual Disk 2.»  Then, I had planned to use the other 1.5 to among the readers as Virtual Disk 3 in a RAID-1 array.  I did it with other servers in PE in the past. »

  This was allowed on a VERY small number of controllers found in Dell servers.  Anyway, you can do that on 6 PERC.  You can replace your existing 3 drives with 2 TB drives, then create a second table (6 to) on the disks (all disks in a disk group must have the amount of space available and impossible to replace the drives with the greatest and to increase the existing RAID array size).

• Internal laptop HP Pavilion dv6-6c53cl - drive Options

  Greetings,

  I just bought a HP Pavilion dv6-6c53cl Entertainment Notebook PC (Costco), and so far it has been a lot of things. Everything seems to work very well.

  Because I do a lot of development in virtual Images, I ran a number of hard factors external to the laptop in the two weeks since I've owned (including an external SSD). All this seems to work well.

  But, I was wondering if anyone knows if it is possible to install a second hard drive or SSD in this model of laptop. I saw on the HP site that some laptops allow for the installation of a second hard drive, but I couldn't find any information on this model that would suggest he can handle such a configuration.

  My main objective for doing this, it would be to keep the original 1 TB hard supplied with the notebook, but perhaps a DSS secondary drive to run the paging activity from when this type of functionality is necessary when running some of my larger virtual Images.

  Any help to clarify whether this is an option with the HP Pavilion dv6-6c53cl would be very much appreciated.

  See you soon,.

  Wayne

  Hi BA,.

  This additional information is very useful. I really appreciate your help.

  See you soon,.

  Wayne

  OPS. Click on the button of the solution on the wrong message.

• Adding additional drives to the content server

  I intend to order the model of the device of the TCS (TCS-C220- PROBUN-K9).  But the condition is to have more than 2 TB of Hard drive in this server.  Model of the device comes with 600 GB of hard drive capacity (2 x 600 GB in RAID 1).  I would add 6 slots to over 600 GB hard drives that there are 6 free on the server.  Is this possible.  If so, may I know the part number for the HARD drive.  Thanks in advance.

  Although you are able to do this, it is not a supported Cisco configuration.

  The way to achieve additional storage available for a content server is to store the data on the external NAS.

  Refer to the section Setting Up Media external storage of Executive Guide.

  Wayne
  --
  Remember the frequency responses and mark your question as answered as appropriate.

• Adding an additional drive

  So I currently have a script that has the followning variables

  $HDD1 = "20".
  $HDD2 = '0 '.

  Here's a snipit of my script code.  $HDD1 and $HDD2 add the VMDK based on the model that I use.  There may be a time when I need an additional drive, once again, that I may have need for two additional discs.

  If I didn't need $HDD2, I prefer to scratch as a way to define what is not in use.

  Now, if I run my script and put $HDD2 = 0 as shown above.  The successful full script and only adds $HDD1 as I hoped, but powercli it does not display errors related to 'invalid value passed to SizeGB' he doesn't like '0' for $HDD2

  I wonder if I should just add this to the line below pertianing to $HDD2?   -ErrorAction SilentlyContinue

  Or is there a better way to deal with this?

  Thank you!!!

  $vm | NumCpu ($cpu) - set-VM - confirm: $false
  $vm | New-harddisk - CapacityGB $HDD1
  $vm | New-harddisk - CapacityGB $HDD2
  $vm | Set-VM-Notes $Note - confirm: $false
  Start-VM - VM $vmname

  Nothing of a Where clause can not correct

  Get-Variable -Name HDD[2-6] | where {$_.Value -ne 0} | %{
    $vm | New-HardDisk -CapacityGB $_.Value}
  

• Get the below question "internal error - failed to initialize the driver of the NLS in a load"

  
  Hi all

  in my project I use the odbc driver with the version as "11.02.00.01" with the 32-bit version, I use the oracle 11g. If I try to connect to my odbc driver, I get the point above.

  for the above, I tried the following, by setting the NLS_LANG in the variable environment, but it does not solve the problem.

  can someone let me know what Miss me?

  Thank you

  1388a329-e0f1-473D-8b00-83cab52824ea wrote:

  Hello

  Thanks for your reply.

  can you please let me know what is the root cause?

  Thank you.

  Why do you need ODBC to connect to Oracle?

  Do you realize that I'm not standing behind you.

  I don't know what you post.

  Actually, you said similar to below.

  my car does not.

  Tell me how to move my car.

  You have not yet posted version or name of the operating system.

  ODBC is misconfigured.

  No one knows if you have error of commission (doing something wrong) or error of omission (not doing something that needs to be done).

  What kind of error do you have?

• adding additional drives in the application process

  Hi, how it is possible to add additional disks in the application process? Now, go in the settings of the virtual machine in vCenter client to add disks after the virtual machine has been created in LCM. We take for the applicant specify how many additional disks and what size (just not RDM VMDK)

  Thank you

  It can get quite complicated because this is certainly not the standard features of LCM and would not be supported by VMware if this customization is not performed by the team of the Orchestration Services of our Professional Services organization... However, that being said, a general approach would be as follows:

  • Duplicate the workflow application for Virtual Machine to the category of workflow custom under user and give a custom name like ask VM

  • Add new entries to the custom workflow that are something like: additionalDiskCount (number) and additionalDiskSize (number) (which implies that all the additional disks would be the same size)

  • Update the workflow to store these values by using a standard LCM Action such as:

  System.getModule("com.vmware.lcm").addDataToTokenKeyAsString (provisioningToken, additionalDiskCount, "additionalDiskCount");

  System.getModule("com.vmware.lcm").addDataToTokenKeyAsString (provisioningToken, additionalDiskSize, "additionalDiskSize");

  The two lines above will store the specified user to other values that the token of data in the database of LCM and you will be able to get it back later because it is related to this particular request token.

  • Hide the initial request button of the tab requests and create a new button that points to your custom workflow

  • Create a new workflow that takes an object of lcm:ProvisioningToken as an entry called "token".

  • Inside of this workflow (let's call it 'Add disks to ask'), you will need to retrieve the additionalDiskCount and additionalDiskSize values that have been stored with the token:

  additionalDiskCount = System.getModule("com.vmware.lcm").getDataFromTokenKeyAsString (token, "additionalDiskCount");

  additionalDiskSize = System.getModule("com.vmware.lcm").getDataFromTokenKeyAsString (token, "additionalDiskSize");

  • You then get the object of VMware3:VirtualMachine of your token:

  VM = System.getModule("com.vmware.lcm.vim3").getVmFromToken (token);

  • Then, using those extracted values and the virtual computer object, use a loop to pass these parameters and some other default values you want in the workflow 'Add drive' (it's in the category library/VIM 3/Virtual Machine management/Device Management workflow.)

  • Once you have confirmed that this new workflow 'Add disks to ask' is working properly by passing only an object token with these entries of additional data stored with them, you can add this workflow for the reminder 'onCreate '.

  The above process is a general approach that could be taken. The specifics of real workflows that you create are up to you and the support of this customization

  Good luck!

  Visit me on http://www.vcoteam.info for vCenter Orchestrator tips and tutorials