Adding a new NETWORK adapter to the ESX Server

Similar Questions

• setting up of a second NETWORK adapter on the ESX machine...

  I'm in the part of my ESX machine and I NIC one configured for LAN, but I try to activate and configure a second NETWORK adapter on this computer, so I can connect it to a VLAN different. When I go I see the place to allow the second NETWORK card (and I have) but it says always "disconnected" and I see only the settings for the first NETWORK adapter in the IP configuration screen. How can I set an IP address and stuff for the second NETWORK card, and why is it showing as offline after that I went out and restarted the management stuff?

  Go under ESX / Configuration / networks.

  You will see your vSwitch. You can change it or click Add, to add a new vSwitch.

  For the basic concepts, see also:

  http://www.VMware.com/files/PDF/virtual_networking_concepts.PDF

  André

• How to associate a VM for the second network adapter on the host

  Hello

  I have created a virtual machine and added a NIC that matches the first physical network adapter on the host Machine. I then added a second NETWORK adapter on the host. I would like to create the second network adapter on the same VM and map it on the second NETWORK adapter on the host. How can this be achieved.

  When I use the "Add Hardware", I does not enumerate the physical network adapters on the host to choose and assigns a VM mac address.

  Kind regards.

  VMware customers use virtual network adapters if you need for a great, a second deck on the host card, but how to do this depends on the host OS.

  For Linux, just run vmware - config.pl and choose to create a second bridged network adapter, choose the right pair of physics.

  For Windows, run vmnetcfg.exe (as an administrator), disable the automatic bypass and then manually fill the two physical network adapters (for example to create two VMnet adapters * with each mapping to a different physical NIC). You also need to restart the host VMware Agent services and VMware Server Web Access before these virtual cards will be available for use.

  Chapter 11 of the guide is a good reference for all this - http://www.vmware.com/pdf/vmserver2.pdf

  Guy Leech

  VMware vExpert 2009

  ---

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

• How to change the NETWORK adapter to a virtual server of perticular

  Dear all Hello,.

  I'm new to update3 esx 3.5 I added a VM to esx and figured out that the Vserver cannot ping desktop

  Finally, I thought that the virtual network adapter uses the second NIC in the physical server that is not connected,

  How can I change the NETWORK card to use the appropriate injector?

  Kind regards.

  Welcome to the Forum - the way the easiest is to use the VI Client.  See page 61 of the quick start guide - http://www.vmware.com/pdf/vi3_35/esx_3/r35u2/vi3_35_25_u2_quickstart.pdf

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• Network adapter and the driver of the mini missing hp!

  Network adapter and the driver of the mini missing hp!

  I have a new computer, hp mini 210 and had to get windows 7 on it hard. Then I played the cd on it Windows 7 Home Premium, and there is no wlan more! He's now getting WARNING pilots are missing when I try to install it, it's the: no available network card what do I do?

  Netzwerk und Treiber von hp adapter mini there!

  I have a new hp mini 210 bekommen und windows 7 starrer is had. Dann habe ich windows 7 home Premium uber die cd is yet und're fand kein wlan mehr! ES kommt nun immer die Warnung Treiber wenn ich installieren is die there will be steht is: keine netzwerkadapter available was soll ich tun?

  Hello:

  Here is the link for the drivers you need for this card...

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5060882&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_105197_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• Adding a second NETWORK card on the server HP Proliant ML 350 G5

  I have a new HP Proliant with a guest of Windows 2008.  HP came with two network cards on the MB.  I need double-home this box on both networks, at least for a while, and this server will be the only road between subnets.  It's just a stand-alone installation inset.

  I looked in the settings of the BIOS on the HP and it's a little confusing, but I'm sure that the second network card is active (it lights up when it is plugged).  When I try to add a NETWORK adapter to the configuration of the host, it is as if the second NETWORK card is not present.

  My question is what is the best way to add this second NETWORK adapter and how do I do that?

  I'll need access to the host of the VI Client on both networks - at least for a while.

  Any help would be greatly appreciated.

  If you go to configuration-card network in the vSphere client is the 2nd NETWORK card that there are listed?  If ESXi is able to recognize the NETWORK adapter (or other people that you add) they should appear in this list without any config changes and be ready for use.

  What kind of networks are you fill?   If one is considered not secure you could be better not add a management on this network port and prefer to have access via a VPN VM or a secure hosted VM / dual.

  Dave

  VMware communities user moderator

  Now available - vSphere Quick Start Guide

  You have a system or a PCI with VMDirectPath?  Submit your specifications to Officieux VMDirectPath HCL.

• Problem "there could be a problem with one or more network adapter on the computer?

  Hi, I just changed my modem, I can't connect to the internet. I can connect to wireless network but not to the internet. When I diagnose, he said, "there could be a problem with one or more network adapter on the computer. I searched the internet but I can't find anything. When I diagnose, I have also seen something on the 'hot spots', but I can't remember it clearly? Any help please?

  Also, when I go to Device Manager network adapters, each of them has WARNING signs except two of them.

  Hello:

  If your laptop is an Atheros AR5007 wireless card, see if installing this driver solves the problem, you have to be able to connect to wireless but no internet network.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-108905-1&cc=us&DLC=en&LC=en&JumpID=reg_r1002_usen_c-001_title_r0004

• popular error; An error occurred when opening a virtual disk. Make sure that the converter server and source running machines have network access to the ESX/ESXi hosts source and destination.

  Once again; same problem, others have encountered but nothing seems to work.

  An error occurred when opening a virtual disk. Make sure that the converter server and source running machines have network access to the ESX/ESXi hosts source and destination.

  We have 1 physical servers, we need to see. Here is the environment. All 3 separated location, 3 all firewall separated

  1 physical servers

  -Internal IP address; 172.16.160.21
  -FARM Firewall

  vCenter Server

  -Internal IP address; 172.16.1.85

  -Local Office (ALX)

  Location of destination (ESXi host):

  -Internal IP address; 172.16.153.20

  -Firewall ROOMMATE

  
  Already completed:

  VMware KB: disable SSL on VMware Converter Standalone 5.x encryption   SSL disabled in converter-worker

  Firewall are open / Tunnel is open throughout the environment.

  I have attached the logs.

  Thank you very much

  POCEH; Thanks for the reply. But I wouldn't be pulling my gray hair if I knew what the problem was. I understand that there not for the peer but why...?

• Converter does not have "an error occurred when opening a virtual disk. Verify that the Converter server and source running machines have network access to the ESX/ESXi hosts source and destination. »

  Hi all

  I'm having some trouble converting server physical windows using autonomous vConverter 5.5.

  error message:

  "An error occurred when opening a virtual disk. Verify that the Converter server and source running machines have network access to the ESX/ESXi hosts source and destination. "

  I have attached the bundle newspapers. Please notify.

  See you soon...

  Your error is:

  2014-11 - 04T 18: 27:27.587 - 08:00 [01236 info "Default"] GetManagedDiskName: Get disklib file name as vpxa-nfcssl: / / [a0110-vmgt70-001] WIN-MOVRCVCSITG/WIN-MOVRCVCSITG.vmdk@a0110tesxhyp01.datacenter.telenorservices.com: 902! 2 b 52 87 75 03 03 ff 49-67 2f 3 a 61 76 and 00 cd e1

  2014-11 - 04T 18: 27:27.587 - 08:00 [01236 WARNING 'Default'] [, 0] NfcNewAuthdConnectionEx [NFC ERROR]: unable to connect to peer. Error: Failed to search for host for a0110tesxhyp01.datacenter.telenorservices.com server address: the requested name is valid, but no data of the requested type was found

  2014-11 - 04T 18: 27:27.587 - 08:00 [01236 info "Default"] Sysimgbase_DiskLib_OpenWithPassPhrase failed with 'NBD_ERR_NETWORK_CONNECT' (error code: 2338)

  Check the manual on the required ports.

  HTH

• How can I type of NETWORK adapter in the virtual computer a vCloud?

  I'm trying to write a script that compares the type of NETWORK card in vCloud NIC type in vCenter to work around a bug in vCloud 1.5.  I can get the type of NETWORK adapter in the virtual computer a vCenter by getting the vCenter VM up and running:

  
  

  $vcvm | Get-NetworkAdapter | FT-auto
  Name Type NetworkName MacAddress WakeOnLanEnabled
  ----              ----           ----------- ----------        ----------------
  Network adapter 1 isolated EnhancedVmxnet 00:50:56:01:00:33 True

  
  

  I do not get the same results when you perform an action similar to vCloud:
  $vcdvm | Get-CINetworkAdapter
  
  
  Connected primary index IPAddressAllocation IPAddress ExternalIPAddress VM
  ----- ------- ---------  ------------------- ---------       ----------------- --
  0 true true manual 192.168.10.30 nic1
  
  
  I can get all the other info NIC, such as the network, IP, MAC, etc, but not the type:
  ($vcdvm. ExtensionData.section) [2] .networkconnection
  
  
  Network: isolated
  NeedsCustomization: false
  NetworkConnectionIndex: 0
  IP address: 192.168.10.30
  ExternalIpAddress:
  IsConnected: true
  MACAddress: 00:50:56:01:00:33
  IpAddressAllocationMode: MANUAL
  Get_anyattr:
  VCloudExtension:

  For the moment, I get the type of NIC the vCloud himself database vCloud.  Thanks for any help.

  I use VMware vSphere PowerCLI 5.1 Release 1 build 793510

  I could tell you where to find it, but there is a bug in the API that shows only as PCNET32 anyway (sleep if she could be VMXNET3). Keep doing what you're doing with the database query.

  See you soon,.

  Jake

• Assign a physical NETWORK adapter to the virtual machine

  Hey everybody,

  I did some research, but found answers to Linux and not Windows. Here's my situation:

  I'm running a physical machine with Dual Gigabit Lan and Windows 7 Pro. I would like to have all my virtual machines that I run under VmWare Workstation 6.5.3 using the 2nd physical NETWORK adapter on the mpotherboard. Is this possible? How do I? Thank you.

  Hello

  You can specify in the virtual network Editor (Edit toolbar option)

  See the attached picture.

  If you can't change that... go to the previous "self-link" tab and uncheck the box

  Concerning

  If you find this or any other answer useful please consider giving points by checking the answer useful or appropriate.

• How to add a new virtual machine to the ESX host using the existing files?

  I need to implement a function clone without the use of cloneVM_task. I copied (a special copy) a set existing VM Directory Active Directory to a new directory and renamed copied all files prefix name of the new direcotry.  What task VM (reconfigVM_task, createVM_task or registerVM_task) command can I use to add that the new copied VM on the ESX host? I need to manually update the .vmx for new UUID file and other parameters?

  Thanks for any help.

  I think that as long as you have updated all the names to reflect the new clone you must be fine and on the first step, you will be prompted with a question.

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  http://Twitter.com/lamw

• displacement of the configurations of lab manager between the ESX server host computers / data warehouses

  Hello

  Is it possible to move configurations of lab manager between the ESX server host computers / data warehouses? I don't see an option in the library & gt; Clone library. Thank you!

  Recently, I used SSMove to migrate our datastore LM set a new LUN.  It's really simple to use.  This KB gives complete instructions on SSMove http://kb.vmware.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&externalId=1006694&sliceId=1&docTypeID=DT_KB_1_1&dialogID=8456583&stateId=0%200%209407965

  See you soon

  Paul

• VMDK file unreadable after migration of VM & update of the ESX Server

  Last night we have updated the ESX servers here and in the migration process machines from one node to the other (by placing a single node of the cluster in maintenance mode). During this migration, the VMs one has stopped running. When we finished the migration and had updated the ESX Server, we brought the system to the top and tried to start this virtual machine.

  First, we looked in the directory of the virtual machine and saw that the VMDK file has a different name, with - dish at the end (before hard). We have renamed the file, removing the - flat extension, and this is where we saw these messages. ESX Server always gbehaved as if the file did not exist or was unreadable. Here is an extract from the log:

  14:40:08.232 27 Feb: vmx | KHZEstimate 2931923

  14:40:08.232 27 Feb: vmx | 2932 MHZEstimate

  14:40:08.232 27 Feb: vmx | NumVCPUs 1

  14:40:08.247 27 Feb: vmx | UUID: location-UUID is 56 4 d d4 6 to 87 30 4 c 0 b - 74 63 41 09 76 a7 1A f8

  14:40:08.247 27 Feb: vmx | WORKER: Create a new group with numThreads = 2 (2)

  14:40:08.337 27 Feb: vmx | Mainmem mapped as pageable

  14:40:08.361 27 Feb: vmx | MStat: Creation vm.uptime Stat

  14:40:08.361 27 Feb: vmx | MStat: Creation vm.suspendTime Stat

  14:40:08.361 27 Feb: vmx | MStat: Creation vm.powerOnTimeStamp Stat

  14:40:08.369 27 Feb: vmx | VMXVmdb_LoadRawConfig: Loading of raw configuration

  14:40:08.376 27 Feb: vmx | Cannot find the file cognos4dios.zurich.ibm.com.vmdk

  14:40:08.378 27 Feb: vmx | Cannot find the file cognos4dios.zurich.ibm.com.vmdk

  14:40:08.378 27 Feb: vmx | DISC: Scsi0:0 OPEN 'cognos4dios.zurich.ibm.com.vmdk' R [(null) persistent]

  14:40:08.380 27 Feb: vmx | Cannot find the file cognos4dios.zurich.ibm.com.vmdk

  14:40:08.382 27 Feb: vmx | DISKLIB-LINK: 'cognos4dios.zurich.ibm.com.vmdk': cannot open (the system cannot find the specified file).

  14:40:08.382 27 Feb: vmx | DISKLIB-STRING: 'cognos4dios.zurich.ibm.com.vmdk': cannot open (the system cannot find the specified file).

  14:40:08.382 27 Feb: vmx | DISKLIB-LIB: cannot open "cognos4dios.zurich.ibm.com.vmdk" with flags 0xa (the system cannot find the specified file).

  14:40:08.382 27 Feb: vmx | Msg_Post: error

  14:40:08.382 27 Feb: vmx | http://Msg.disk.FileNotFound VMware ESX Server cannot find the virtual disk 'cognos4dios.zurich.ibm.com.vmdk '. Please check that the path is valid and try again.

  14:40:08.382 27 Feb: vmx | http://Msg.disk.noBackEnd can't open the Flash 'cognos4dios.zurich.ibm.com.vmdk' or one of the disks disk that it depends on.

  14:40:08.382 27 Feb: vmx | http://Msg.disk.configureDiskError reason: the system cannot find the specified file. -.

  ---

  14:40:08.399 27 Feb: vmx | Power DiskEarly module has failed.

  14:40:08.399 27 Feb: vmx | VMX_PowerOn: ModuleTable_PowerOn = 0

  14:40:08.401 27 Feb: vmx | WORKER: asyncOps = 0 maxActiveOps = 0 maxPending = 0 maxCompleted = 0

  14:40:08.752 27 Feb: vmx | vmdbPipe_Streams could not read: OVL_STATUS_EOF

  14:40:08.752 27 Feb: vmx | Output of idle VMX

  14:40:08.764 27 Feb: vmx | VMX VMDB Flushing connections

  14:40:08.771 27 Feb: vmx | IPC_exit: disconnect all discussions

  14:40:08.771 27 Feb: vmx | Exit VMX (0).

  14:40:08.772 27 Feb: vmx | VMX has left the building: 0.

  The VMDK file is indeed the most, but VMware seems unable to open it. For what it's worth, it was also noted a .hlog file in the directory of the virtual machine on the server:

  cognos4dios. Zurich.IBM.com - 3 c 377802 .hlog:

  C2 C0 71 17 14 6 b6 01-49 fb 00 1 a 64 35 20 e9

  Anyone can shed some light on this? Done-flat suffix in the VMDK file have a special meaning? Any recommendations for the rescue of this virtual machine?

  Thank you very much in advance.

  Kind regards

  Michael L.

  -Flat.vmdk file is your data file where all of your actual data has been stored. Name back to the original value.

  It seems that you have lost the descriptor file (vmname.vmdk). If you have not an extraction backup the following procedures to re-create this file

  http://www.aMIKKELSEN.com/?p=93

  http://communities.VMware.com/thread/115063

• What are the network requirements for the remote server of the Panel?

  What are the network requirements for the remote server of the Panel?

  I tried for awhile now to set up a Control Board.  I can connect to my remote panel of computers from other computers on my local network but nowhere else.

  Whenever I use web publishing tool gives me a URL in this format: Http://Computer-Name.Corporate-Name.local:8086 / VI - nom.html apparently it means I have a local DNS server and this URL is meaningless to the public.

  When I try to connect with the Operate > Connect to... remote control, I get this error message:

  "Connection to Server remote panel...".
  "Connection refused by the server remote control specified: make sure that the LabVIEW Web server is enabled on the specified server.

  I got the same error when I tried to host a remote panel from my laptop at home, on my Wi - Fi.  Is there some network settings or firewall I'm not seting?  Would it be my server or the router or the private network?

  My goal is to be able to host remote panels of my laptop while I'm on the international scene, creating using 4 G internet mobile.  Is it still feasible?

  As he Turners on my router had to be put in place so that my Port is in the rage of transfer.  Also I had to disable DHCP.  Without that you cannot host behind a router.

  These are the instructions I put fallow:http://digital.ni.com/public.nsf/allkb/B1E9A3D78BAED949862573AD0065D4D2