Adding network XP Pro via the Windows 7 workgroup printers

Similar Questions

• How to create a (class dot Tag without spaces) tag.class via the window of Dreamweaver CS5 rule.

  How to create a tag.class via the window of Dreamweaver CS5 rule.  I want to create a class that affects a specific tag.  I can for this use the code window, but I'm trying to use the Style CSS window.  The tag that I create is 'ul.navbar.  I was able to be machined, but I get "ul .navbar", note the space between L and the period.  I want to remove the space and just create "ul.navbar", without having to rename.  The code will appear as:

  ul.navbar {
  position: absolute;
  width: 9em;
  left: 1em;
  top: 2em;
  list-style-type: none;
  }
  The question is perhaps more base on my understanding of CSS rather than Dreamweaver, if yes, I'm sorry.  I'm just starting to work with CSS.
  Thanks for your help.

  My point is that this is not the best way for the style of this element of the page in most cases.  However, if you create a rule made up, you can enter "ul.navbar" directly in the selector name field.

  Don't overuse of classes.  They confuse you in just a few weeks after you have modified looked at the site.

• Cannot update Windows 8 Pro via the store or the control panel

  I have all the updates that are installed, but I can't just update to Windows 8. 1. I got the notification in the store and then he said I had to install the latest updates I did. Unfortunately, after installing the updates notification of the store has disappeared and there is no way that I can find an update and I really want it to be in harmony with my Windows Phone. In addition, my edition is Windows 8 Pro, at least that's what say my properties. Please help :)

  Hello

  I suggest you to reset Windows Update components and see if that helps.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058/en-us

  Note: Follow the steps in this section carefully. Serious problems can occur if you modify the registry incorrectly. Before you modify it, Save the registry restore problems.
  
  See also the link: the problems with installing updates
  http://Windows.Microsoft.com/en-in/Windows-8/troubleshoot-problems-installing-updates

  I hope this helps! Let us know if you have other problems with Windows in the future.

• using recovery drive after upgrade to 8.1 pro via the pro pack

  I ordered a HP envy 15 TS precoonfigured j - 100 quad system during Black Friday pre sales - this machine has everything I need except Pro 8.1. I intend to upgrade the operating system to 8.1 pro by buying and installing the Pack Pro Micorsoft Windows 8.1.

  My questions are:

  (1) only the installation/upgrade generates a new file recovery?

  (2) if my system breaks down and I need to reinstall windows 8.1 via the recovery disk, what is the sequence of steps to restore my system Pro 8.1.

  Upgrade to Windows Pro 8.1 does not generate a new recovery file. I suggest that you create a recovery disk before moving on to the pro.

  If the system breaks down in the future, you can use the recovery disk and restore the system as long as the plant and try the upgrade to pro again.

  HP PC - created disc recovery or saving an Image recovery on a USB (Windows 8)

  Learn how to create DVDs of recovery or record a recovery image on a USB flash drive to restore all the original software, in the event of a major computer problem

  Alternatively, if you pass successfully to pro, you can also create a backup of the system. Using this, you can directly restore your system to Pro in the event of system failure. For back system procedure, see the following link:

  http://winsupersite.com/Windows-8/Windows-81-tip-use-system-image-backup

  HP PC - created disc recovery or saving an Image recovery on a USB (Windows 8)

• Control switch radio wireless (Fn + F5) via the Windows registry / software

  In a school environment, students have discovered that they can cause problems using the software switch Fn + F5 to turn off the Wifi radio. I know that the material LED turns off when this happens, but the teachers are too busy to identify it. The result is that users are unable to connect, and the Windows Welcome screen is not quite intuitive, which gives a message error "there currently no server connection.

  I am interested in applying a "fix" to this problem at startup. Maybe a fix Windows registry to "force" the Lenovo software switch to turn on the Wifi.

  I had a bag autour with a comparison of registry Interstate market and am currently getting the following (among other changes, such as DHCP etc.) diff:

  HKLM\SYSTEM\ControlSet001\Control\Class\ {4D36E972-E325-11CE-BFC1-08002BE10318} \0018\RadioEnable: 0x00000000
  HKLM\SYSTEM\ControlSet001\Control\Class\ {4D36E972-E325-11CE-BFC1-08002BE10318} \0018\RadioEnable: 0x00000001
  HKLM\SYSTEM\CurrentControlSet\Control\Class\ {4D36E972-E325-11CE-BFC1-08002BE10318} \0018\RadioEnable: 0x00000000
  HKLM\SYSTEM\CurrentControlSet\Control\Class\ {4D36E972-E325-11CE-BFC1-08002BE10318} \0018\RadioEnable: 0x00000001

  However, forcing these dwords to 0 x 1 doesn't seem to be enough to turn on the radio.

  Has anyone else had a similar experience? Is there a BIOS/UEFI underlying setting that might be able to be accessed via the software?

  Acxtually that I found after searching a bit more. Can be controlled via the command line:

  "C:\Program Files\Lenovo\HOTKEY\TpFnF5.exe" /wlon

• How to allow browsing the Web via the Windows Vista firewall

  I'm trying to lock the outbound firewall rules on my PC. My thought is that if there is no malicious software on my PC, I would not communicate with other computers. To this end, I really want to allow connections from web browser and to make remote desktop connections. Public profile in the Windows my PC firewall is active. In addition, all inbound and outbound connections that do not match one of the active rules are blocked. I created an outbound rule custom firewall program that allows the %ProgramFiles%\Internet Explorer\iexplore.exe program to establish connections. The rule is configured for all profiles and any Protocol (which probably should not be necessary). However, IE is still unable to connect. I'm rather confused and don't know what to do...

  Andrew

  Thank you all for all the great links :)  It turns out that the problem I had was the result of the creation of a firewall exception for the 64 bit version of Internet Explorer, rather than the 32-bit version.  When I changed the program that has been authorized by the firewall of %ProgramFiles%\Internet Explorer\iexplorer.exe \Internet.exe (x 86) % ProgramFiles %, I was once more able to connect to Internet by using IE.  Once again, thank you for all the links.  I think I understand a little better Windows Firewall now.

  Andrew

• OfficeJet Pro 8620: Officejet 8620 Webscan Pro via the power supply produces corrupt PDF. Yes, I'm serious...

  The environment:

  Network connected HP Officejet Pro 8620 all-in-one.

  Workstation running Windows Pro 64-bit 10.

  Internet Explorer browser, Adobe Acrobat Reader DC as default PDF reader.

  Full functionality of the HP printing software is NOT installed.

  Using the feature of webscan and the automatic document feeder, I scan the document with the default settings for a PDF file (although I have experienced with other parameters).  The scan works very well, and the new page opens with the displayed document.  If I scroll the document by using the wheel on my mouse to halfway through the volute, a window pops up saying "Year Internal Error Occurred" after what I have to hit OK.  I can save the document in PDF format, and as long as I open it with Acrobat Reader DC, it will show.  If I try to open it with another drive (for example Microsoft Edge, I get a blank page).  I tried to create a new PDF by printing it in Acrobat Reader to a PDF generator (generator PDF PrimoPDF and Microsoft), but in both cases, it says "the file could not be printed" and "no pages selected to print.

  The scenario above also happens if I scan a multi-page document.  HOWEVER, if I scan a single page document with the original on the glass, the scenario above does NOT.  It creates a perfectly usable PDF.

  So... to eliminate Adobe and or IE as the culprits, I put the PDF reader by default Microsoft Edge and launched the webscan using Microsoft Edge also.  When I scanned it using the automatic document feeder, it fed the document, acted like he was treating it, and the result was a WHITE page.

  The printer firmware is up to date.  I tried the old turn it off, unplug the unit, wait a while and turn it on again the solution, but that made no difference.

  I searched the forums and see reports that correspond to what I see.  Overview of all what could happen here would be appreciated.

  Thank you.

  Hi @exfordguy

  Welcome to the Forums of HP's Support.

  In General, the WebScan function is intended for diagnostic purposes and is not quite as functional as the software. If you choose not to install the full feature software and driver, you can use Windows Fax and Scan.

  If the printer has Web Services enabled, you can also go into the applications menu and use the scan to e-mail.

  Honestly, I see no reason why you are scanning via WebScan when there are better options available.

• Updating a game via the Windows 7 Games Explorer

  The following error occurred when I check online for updates of game. Windwos fails to connect on the server game updates check your network connection or try again later.

  This is the new feature in Windows 7 that automatically analyzes the updates of the game, I'm right click on a game, and then click Search online updates.

  It seems crippling sertin Add ons in Internet Explorer resolved the problem I can't remember where exactly they must have been corrupted?

• No active network adapters found in the Windows Task Manager?

  My laptop under WinXP SP3 does not connect to my wireless network. It worked fine until 3 weeks ago. The laptop thinks it is connected to the network but when I look in the Manager of tasks, and it sees no network adapters. I changed my wireless network card, tried another router, reset WINSOCK (winsockfix), scanned for malware with windows-kb890830 - v4.3(nothing_found) and nothing seems to help. Everything else on the computer seems to work very well. I don't have a windows boot disk to reload windows (mobile bought refurbished didn't come with the disk). Can anyone help? It would be greatly appreciated.

  Hello

  You can try the troubleshooting provided in the link below steps to fix the problem.

  Your network adapter does not work and Windows XP does not include a Compatible driver for the network card

  http://support.Microsoft.com/kb/315275

• Network key/password on the Windows XP program does not?

  I am trying to reinstall/repair my windows XP program and run on Parallels, but for some reason any the network key/password I provided for the CD does not work this time?  These things expire after a while that I didn't take my purchase since installing it 4 years ago.  Any help is appreciated.  Thank you

  Hi Kim,

  Are getting you error like "the product key used to install Microsoft Windows isn't valid? If Yes check out: http://support.microsoft.com/kb/883254.

  I hope this helps.

• WRT610N - no network is available on the Windows XP laptops

  Just installed a WRT610N router and I'm typing this from my wireless MacBook and everything seems to work properly.

  However, I can not detect with two other laptop Windows XP network available. The two bands of SSID is enabled.

  The two bands are on 'auto radio bands' and 'mixed network mode ". I suspect a setting (not) to be checked / changed. 5.0 GHz band is WPA and WEP is 2.4 GHz band. I could at least see / detect one of the strips?

  I can work wireless after working cables. Somehow, the parameters are downloaded in this way. I have installed all the drivers which always however on two laptop. Does anyone know how to detect the wireless network and how to automatically connect to it? Thank you

  OK, problem solved:

  -Both bands: mixed

  -Both bands: 20 Hz

  -only one channel per band

  -SSID: enabled

  - and LELA UNINSTALLED.

• (Redirected) Dell OptiPlex 3040 MT Windows 7 Pro (includes the Windows 10 Pro license) - how do I install Windows 10?

  How install Windows 10 on a Dell OptiPlex 3040 MT with Windows 7 Pro x 64 installed to come (and that includes a Windows 10 Pro license)?

  The system comes with a DVD titled Windows 10 Pro x 64 read "use to reinstall the operating system on a system with OS installed"

  Best of this post in the forum Windows 10 here:

  http://en.community.Dell.com/support-forums/software-OS/f/4997

  Bev.

• Client vSphere 5.0 works on network, but not via the SSH tunnel

  Hoping someone can help you.

  Seems that others have this problem as well.

  Can connect to the network, but not through an SSH tunnel.

  On the network, I am invited to accept/ignore a SSL certificate.  This does not happen when trying to connect remotely (via an SSH tunnel).

  During troubleshooting, I port passed almost all the ports TCP, starting w / ports 80, 443 and 902.

  Through the SSH tunnel, via a browser, I can successfully access https://127.0.0.1 (VMware server), but the client software will not complete the connection, w / error message: «...» "The client could not send a request to the server."

  Any help would be appreciated.

  Thank you.

  Managed to understand this myself, having invested in a way more time I should have.

  This announcement in the hope that it will help others.

  In your SSH client, port forward with the help of one local loop, IP OTHER THAN 127.0.0.1 (such as 127.0.0.2 for example).

  Port 127.0.0.2:443 before--> IP:443 target

  127.0.0.2:902--> target IP:902

  127.0.0.2:903--> target IP:903

• Install the CS6 on a macbook pro, and the windows desktop 8

  Hello

  I got cs6 installed on my book of mac pro for about a year or so now and I bought just a windows desktop 8 comes to do work at home. However, my question is am I able to download and install cs6 on windows 8 and to have a copy on my mac? I understand that I will not be able to use both at the same time.  I just want to know if the serial number that I had had with the purchase of CS6 for mac would also work for windows 8?

  Thank you in advance!

  I just want to know if the serial number that I had had with the purchase of CS6 for mac would also work for windows 8?

  No, it won't.

  Serial numbers for Creative Suites (CS6 and earlier versions) are the specific platform: Windows only or Mac only.

  There is a process of sharing platform to pass from one to the other, but this is something all or nothing - if change you from Mac to Windows, you lose rights to your Mac license.

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Order-Product-Platform-Language-swap.htm

  Note: these issues do not exist with versions Cloud (CC). They work on the Mac or Windows with any permutation of the complex processes required files...

• I had to install Win XP because I replaced my hard drive there SP 1a and I'm trying to update to SP2 and then SP3 - I can't do it via the Windows Update site - do I need to do?

  It's a Dell Dimension 2400 and I have the original CD of the operating system (Windows XP Professional including Service Pack 1a).

  I also have the MS XP product key of the "label" on the side of the computer.

  Also, I use Norton 360 and who will download this machine as soon as I have the other updates that have been completed.

  After you install N360 follow these steps:

  (1) performance "Live update", may need to run it more than once to install the updates. Note: A reboot may be necessary.

  (2) run a "full system scan".

  (3) run a full scan of the "reputation".

  This will reduce the initial impact of any perception of a slowdown in performance. If you have N360V5 you are entitled to a free upgrade to N360V6.

  J W Stuart: http://www.pagestart.com