Adding printers Wireless Solution Center

Similar Questions

• Failure of wireless solution Center

  Solution Center does not connect to D 110 series wireless printer.  I can print from other programs wireless.  Solution Center connects via a USB connection. Windows 7.  I can't find the original software disk

  How did you initially installed the printer first, USB or wireless?

  Uninstall the HP software. When you reinstall the drivers and full software features, select Wireless. After this download and install and you print, then go to plug in the USB cable.

• Communication of printers HP Solution Center, Port 427 problems

  I installed the HP Solution Center in the installation process it finds my printer on the network.  I can call the pritner using internet explore and type the IP address of the printer, I can print it, but HP Solution Center can 'communicate' I get the following error message:

  "Your computer is unable to communicate with your printer to 192.168.1.102. This can be the result of firewall software. If you use a software firewall, make sure that the 427 UDP port is unlocked for the inbound and outbound traffic.

  , The software cannot communicate with your printer address IP 192.168.1.102. This can be caused by many factors; the most common is the firewall software. »

  How to open port 427 or is there another solution?

  I had the same problem. I went to add devices and added the HP Officejet 6500 and it started to print. For some reason any computer would not communicate with the printer until it was added. I hope it works for you.

• HP - Officejet 4500n wireless solutions Center

  Hi all

  Currently get:

  error analysis in the file (x 86) \hp\digital imaging\bin\hpqscloc\1033.xml

  8, 64 - bit Windows.  I tried uninstalling and reinstalling, and also the restoration of the system.

  Cannot be resolved.

  Any help greatly appreciated.

  Please follow the steps below. Normally, I would like a link to the printing software, however, I do not know which printer everyone uses.

  Of the Original installation CD:

  1. Insert the CD in the drive and then cancel Setup

  2. open my computer and click right then on the CD from the drive and select open

  3 open the Util folder

  4 open the CCC folder

  5 enforce in the L4uninstall.exe (IF not HP computer, if computer HP function L3uninstall)

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  Enter your printer model and go to software downloads & pilot

  10. run the download to reinstall the printer

  If the software has been downloaded and extracted to your system:

  1. type % temp % in the field of race

  2. Locate and open the folder starting with 7z (example: 7zS2356)

  3 open the Util folder

  4 open the CCC folder

  5 enforce in the L4uninstall.exe (IF not HP computer, if computer HP function L3uninstall)

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  Enter your printer model and go to software downloads & pilot

  10. run the download to reinstall the printer

• Cannot open the solution Center

  I reinstalled my C4780 instructions and it works.  But I can't connect to the center of Solution; tells me that the installation is not complete.

  Hi Sandy,

  There are two options.

  • You can try to "Fix" the current Solution Center installation on your computer
  • You can try to install a new copy

  A fix package from in programs and features (as it's named in Windows 7).  XP would be similar - the point is to find the place where stored programs; This is done by opening the control panel.

  Repair:

  This path is for Windows 7 (XP would be simliar):

  Control Panel > set to 'display on the icon' (right) > programs and features

  Scroll down and look for "HP Solution Center".

  Highlight the item and right-click.

  See if we offer the chance to 'Repair' installation.

  If you are offered the option, select repair,

  If you are offered only uninstall, you can go ahead and Uninstall the package because it does not...

  Support and Installation of the solution Center:

  This is the help file for the Solution Center.  That it contains, you will find the information that you need to reinstall the software.  Select this option to download the software when you find the option to do so under your operating system.

  HP printers - HP Solution Center Software frequently asked Questions (FAQ)

  The Solution Center software is part of the largest "full software functionality" for your printer.  Most of the printers work fine without the "Full Feature" installed package, even if some of the additional features may be missing.   The full feature software may (or may not) be installed on your printer.

  Be aware that some of the packages of full software functionality for printers are large - if you have limited bandwidth (slow internet connection), make sure you load your package installer with you do not have something else which requires a lot of resources of your internet connection.  (Do this when you do nothing else, please be patient.)

  Full feature Software - Windows 8.x and higher:

  File name: PS_AIO_06_C4700_140_408 - 5.exe

• The Officejet 8600 can be added to the HP Solution Center?

  The HP Officejet Pro 8600 N911g can be added to the HP Solution Center?   The 8600 was installed on a computer that already had installed HP solutions Center.  However, the 8600 is not detected by the HP Solution Center.

  OfficeJet Pro 8500 Wireless is already integrated in the HP solution on this computer center.

  Windows XP

  Hi Solution Center is used only for earlier models and the 8600 can be added. The 8600 has its own software located by launching the desktop icon for the printer or by accessing it through your programs > HP > product folder

• My PC communicates wirelessly with my C309a HP, but Hp solution Center has stopped working.

  My PC (Dell XPS 9000) communicates with my C309a HP wireless printing, but the Hp Center solution has stopped working. If I should not be able to use all functions wireless?

  I get a message error "HP Solution Center can work because your device installation is not complete. Please connect the usb cable or re-run Setup from the instattation for a network installation CD. "When I put the installation disc to remedy the problem, it tells me that my current software is the last, while it will not be updated. When I go to the center of update, it tells me I have the latest version of the software.

  Hello

  Try these:

  Click the icon to the Start Menu > programs > HP > HP Photosmart c309a > add a device

  With this, it will find the wireless printer and reconfigure the parameters; Just follow the guests. After completion, try to open the HP Solution Center.

• 4500 wireless: HP Solutions Center does not work since the upgrade to windows 10

  Hello

  My solution Center no longer works since I've upgraded to windows 10.

  Thank you

  Welcome to the HP community @DJHar,

  I understand that the Solution Center Software no longer works since you have upgraded to Windows 10, and I wanted to reach out for help. I would say firstly under the HP printer install wizard for Windows, that will find the drivers and software for your Officejet 4500 Wireless and install the correct software for Windows 10. Try the software for access later, and it should work.

  Let me know the results!

  Good luck

• I have 3 different places in different printers 3. HP Solution Center does not recognize all but 1.

  I have 3 different printers HP F4400, officejets 6500 E710n-z and 709n in 3 different places. HP Solution Center only recognizes F4400. How can I get my Solution Center to recognize the other 2 without reistalling all the time. Here my current printer can print on 710n-z but the printer cannot scan, says no printer detected. How do I solve this

  It's very strange. Try to create a new user account and setup the printer on this account. If this does not work, try to install the printer on another computer and see if it has the same problem. Let me know what happens.

• HP Solution Center does not detect that I've added a second printer

  I am running Vista and have the center of solutions HP (latest version) installed and have HP 2575xi connected network.

  HP Solution Center recognizes my HP 2575 x, and everything works.

  But now I have an extra F4280 HP I want to add in via the USB port on the computer.

  First I tried to install it just just pilots F4280, hoping that the HP Solution Center would detect the new printer, but it didn't.

  Then, I tried the "Full Install" from the installation disk supplied with the F4280. But he determined that I already have all the software installed, so it didn't install anything.

  Center of HP solutions certainly looks like he can handle multiple printers (it has the tabs at the top). But I can't seem to recognize the new printer.

  I could try to uninstall and reinstall. But I'm worried that HP Solution Center does not detect the 2575xi since it is a network printer.

  How can I know the HP Solution Center to detect and add my new printer?

  Thank you.

  When you install the F4280 software, and it is said that the latest version of the software is already installed, then it should give you an option to 'add a device', no?

• Questions of solution Center with 8500 wireless pro on the new machine, Windows 7 Pro

  Hi all

  I'm having a really hard time trying to get the software of Center of Solution for my departure Officejet 8500 Pro Wireless A909G. I am trying to install on a laptop Toshiba T130 new that came with Windows 7 Pro.

  I use the latest version of the software (full version) for Windows 7, downloaded from the website of HP (32-bit).

  The installation process works very well. Once completed, if I launch the centre of Solution without restarting the computer, it works fine.

  As soon as I restart the machine, that's right--I can't launch the centre of Solution more and I can't use the PRINTER. Solution Center told me that the installation failed.

  I also tried the following so far:

  -Windows patched with the latest updates-to - no chance.

  -read through the different posts of people with similar problems and tried some of the suggestions (so far, update of flash player and by applying the patch DOT4 seem to be most applicable to my situation)-no luck.

  -rebuild the machine (even if it's new!) - no luck.

  If there is another job out there dealing with this, I missed it. Feel free to point me in that direction... Thank you.

  Looks like I solved my problem (after the days of play)

  There is not a lot to it:

  • Completely uninstall the software and reboot
  • Open the folder that contains the complete software (mine was called OJP8500vA909_Full_13.exe) self-extracting exe
  • Right-click on the file, then select Properties from the menu
  • Click on the compatibility tab, located in the upper part
  • Downstairs, you'll see the option that says to run this program as an administrator. By default, it is not checked. I checked, click apply then OK.
  • Run the installer as usual through until the end.

  That's it - and it worked for me. I hope this helps.

• HP ProBook b 6450: Solution Center Software for the range of all-in-one printers, HP Photosmart C4385

  I installed the package full HP printer and it has not installed the solution Center. Impossible to find. Need this to scan documents. What should I do?

  Hello

  You can download the complete software of this site features:

  http://support.HP.com/us-en/drivers/selfservice/HP-Photosmart-C4380-all-in-one-printer-series/3221640/model/3221645#Z7_3054ICK0K8UDA0AQC11TA930O2

  Once you have done this, is that you can uninstall before reinstalling the software downloaded?

  This printer model IS USED the Solution Center.

  Let us know how it goes.

  Please click the "accept as solution" if it helped to solve your problem and "Bravo Thumbs up" as an encouragement

• How are added to the HP Officejet Pro 8600 printing solution Center

  The center of printing solutions shows my Photosmart C5580.  No idea how to add an OfficeJet Pro 8600?

  Shlomi Hi and thanks for a quick response.

  I had hoped to add 8600 Solution Center as an HP upgrade / download link in the menu Wizard printer you mention using the icon, re - set the default printer for the "8600 Fax.

  He also changed the list of this menu screen to be only four: HP printer Asst (but does nothing when a click), Set Prefs, see what printing and the printer to customize.

  Previous menu, as you no doubt refers, had several printer features that included all submenu links functions, I used (including to scan a doc, preferences, etc.).  Frustrating...

  After uninstalling and reinstalling, tweaking, etc, I always have this quick menu by clicking on the icon of tune.  I have tried different methods of scanning as the right click on the printer in Control Panel devices, but the scanning from which lead to a horrible list of basic functions, a confusing list of formats, etc.

  Finally, I did a scan in the screen menu of the printer who made a point "scan" in the Start Menu, I right click it to pin that on the Start Menu, then created a new shortcut on the desktop with the path to him... and now the icon / printer works to get the menu scanning.  Phew!

  About the loss of the Solution Center is regrettable.  Very handy tool to do the various tasks and the refinements of a scanned document that do not exist in the limited functions / buttons on the 8600 scan menu results.

  At the same time and while I'm... To the laserjet subject large workhorse of HP LJet 1320, several other positions and all forums have problems loss of functionality after passage from XP to Win7.  I finally got all but one device works (PCL6/5th, printing on both sides, etc.), but the pilot is only 600 dpi quality close to the project, instead of the prior 1200 dpi (especially good for forms, thin fonts, etc..).  Which is just a discharge on the technology and support for the products that brought me as a customer to use HP in the first place.

  Thanks again for your reply and your suggestions.  Ready to try anything to solve the so-called reliable downloads / upgrades.

  Best regards...

• OfficeJet 6500 Wireless: Win 10 - Solution Center - scan not performed as another program using the imaging device

  I upgraded to 10 Windows on a laptop ASUS, then updated the software for a HP Officejet 6500 E709n Series printer HP solutions Center.

  I can print successfully to the printer but when I open the solution Center and then try to scan an image or a Document, I get the following error "Scan cannot be performed because another program or computer using the networked imaging device.

  Extended error information is 8, [(0.18,-2147467259)]

  When I look in device under imaging devices Manager, two devices are displayed ASUS USB2.0 WebCam (1) and (2) Officejet 6500 E709n.

  It would be much appreciated if someone could help me solve this problem.

  Hi midnight-anwrs,.

  Thanks for getting back to me.

  I looked into your link "Printer problems after upgrade to Windows 10" and 6 "Scan with a scanning application" stage, I found the solution.

  I downloaded the "HP Scan and capture App" and can now easily scan photos and documents.

  Thanks for your help.

  Much appreciated,

  KenRabs

• Inkjet printers: Solution Center: "No Options of Scan" or the "Scan settings not" in Windows 10

  When you try to start a scan from the printer control panel, displays one of the following error messages on the printer:

  • No Scan options: refer to device documentation to troubleshoot
  • Analyze the parameters are not defined

  These errors could display if your inkjet printing software is HP Solution Center.

  See the steps in this doc to solve the problem: 'No. Scan Options' or ' Scan settings not Set "message (Windows 10)

  Solutions include restarting the computer, reset the printer, changing settings in the printer software, running printing HP and doctor Scan and a few other troubleshooting procedures.