Communication of printers HP Solution Center, Port 427 problems

Similar Questions

• Adding printers Wireless Solution Center

  I am running Win7 and after restarting my wireless network, wireless (Photosmart C7250 Photosmart Premium C410a) printers have been added in windows using the window adds a printer.  Now, the HP Solution Center does not see wireless printers.  Is there an easy way to add them to the center of solution since they are on the network (with a different IPv4 address of initial installation)?

  Look in your Start menu all programs for the HP folder with printer software. You should see an option "add a printer". To avoid this problem in the future I would set a static ip address for the printer.

  http://h30434.www3.HP.com/T5/printer-networking-and-wireless/static-IP-address/TD-p/1663045

• HP C7280 solutions Center will not work after the upgrade to Windows 7

  I was running Vista and connected the C7280 wired and wireless. The last month or so has been wireless without any problem.

  I've upgraded to Windows 7, reinstalled the driver I had, and now when I try to scan I get an error that says: "an unsupported operation was attempted" which appears twice, then I get an error that says "an invalid argument has been detected.

  A window pop up gives then a few measures to try to resolve the problem.

  I downloaded and installed the driver PS_AIO_02_Net_Full_Win_WW_130_140.exe which did not work.

  I deleted the printer of the material then uninstalled the Software Solution Center

  Driver package driver re-installed PS_AIO_02_Net_Full_Win_WW_130_140.exe C7200 and

  dot4patch_reboot.exe installed,

  Stop the printer, it unplugged for a few minutes, restarted the computer, and

  the same errors.

  The driver is a year old, and I can't find a newer version.

  Exit the:		2009-10-20
  Version:		13.1.0

  The patch is the latest of a few months, but it did not help either. " Print Patch HP software when upgrading from Vista to Windows 7

  2009-12-06, version 1.0, 1.22 M

  This Windows 7 fix corrects some of the features of the printer after upgrading Vista to Windows 7. For networked printers, go to www.hp.com for more support information.

  Any help is appreciated.

  Finally, you have this problem fixed. With the support of HP no.

  I installed the software for a HP Photosmart Premium C410 series and it fixes some problems I had with the HP Solution Center, analyses the problems in the C7280 printing software.

  Go figure...

• Cannot open the solution Center

  I reinstalled my C4780 instructions and it works.  But I can't connect to the center of Solution; tells me that the installation is not complete.

  Hi Sandy,

  There are two options.

  • You can try to "Fix" the current Solution Center installation on your computer
  • You can try to install a new copy

  A fix package from in programs and features (as it's named in Windows 7).  XP would be similar - the point is to find the place where stored programs; This is done by opening the control panel.

  Repair:

  This path is for Windows 7 (XP would be simliar):

  Control Panel > set to 'display on the icon' (right) > programs and features

  Scroll down and look for "HP Solution Center".

  Highlight the item and right-click.

  See if we offer the chance to 'Repair' installation.

  If you are offered the option, select repair,

  If you are offered only uninstall, you can go ahead and Uninstall the package because it does not...

  Support and Installation of the solution Center:

  This is the help file for the Solution Center.  That it contains, you will find the information that you need to reinstall the software.  Select this option to download the software when you find the option to do so under your operating system.

  HP printers - HP Solution Center Software frequently asked Questions (FAQ)

  The Solution Center software is part of the largest "full software functionality" for your printer.  Most of the printers work fine without the "Full Feature" installed package, even if some of the additional features may be missing.   The full feature software may (or may not) be installed on your printer.

  Be aware that some of the packages of full software functionality for printers are large - if you have limited bandwidth (slow internet connection), make sure you load your package installer with you do not have something else which requires a lot of resources of your internet connection.  (Do this when you do nothing else, please be patient.)

  Full feature Software - Windows 8.x and higher:

  File name: PS_AIO_06_C4700_140_408 - 5.exe

• HP Photosmart C4795: HP Solution Center

  I had the Photosmart printer for many years. The Solution Center SW worked fine until today. I used the printer and the solution center with no problems under Windows XP, Windows 7 and Windows 10. I've been on 10 to win for a few months now. Today, I plan to do a sweep and double clicking on the icon Center solutions for the launch of the product. All I get now is a brief flash of the screen followed by a chime of the computer and nothing after initial startup.  The running program is hpqdirec.exe.  Is the solution to reload the Solution Center SW from the original disc that came with the printer or another source or? Thank you

  Research on "Advanced Windows Update".
  Launch "Advanced Windows Update Options.
  Select / point click "view your update history.
  Select / click on "Uninstall updates" an element
  Find KB3132372 in the list, select it and click on uninstall.

  ---

  WHY? > Updates W10 don't much care on HP application to function properly.

• 10 windows and thinkVantage Toolbox and Solution Center

  I found a update for the system up-to-date, but none for the box tool. None of the functions are available on Windows 10. Y at - it a new version of the Toolkit soon? Also, the Lenovo Solution Center has a problem with Windows Update and impossible to access the update history.

  Looks that they abandoned it 18 June 2014

  http://support.Lenovo.com/us/en/downloads/ds029704

  Lenovo Center's Solutions is the replacement it appears: https://support.lenovo.com/us/en/lenovodiagnosticsolutions/tools/lscoverview

• HP C6280 Solution Center will not run or install

  I used my C6280 on my home network for portable years with intalled Solution Center on a computer running desktop and Vista in Windows 7 with only the installed printer drivers. HP update was eanbled on the desktop.

  In the last two or three months, I started to get a number of error messages on my desk that says something wrong with the Solution Center. The problem gradually worsened to the point where the center of Solution would any (impossible to detect the device seems to be the most recurrent message) and I was unable to run the parser.

  I was able to maintain the printer fnctionality by deleting and then adding the printer through Windows, although I seemed to be forced to do it every day.

  I went on the forum and decided that the best course of action to restore all the features is to uninstall all the HP software and then download/install the software suite. I downloaded the installation Vista 32 bit version (100_228_PS_AIO_02_Full_Net_enu_NB.exe) andI tried several times with no luck - the installation always seemed stuck immediately after extraction of the files.

  I went back on the forum and found how a level 4 uninstall since beginning of temp with 7z folder... I did that and tried again (after checking that it was updated my Adobe's Flash).  The installation went a little further this time but ends by paused again. File not found.  I ran the installation .exe to the temp folder and went a little far but stopped again. An error log has been created and a "fix" was placed on my desk. I followed the instructions but the "fix" is irrelevant (it was just a text file - nothing to run I could decypher). Just to make sure I did it right, I repeated the whole process of uninstall/download/reinstall twice with the same result.

  The process above began to remind me of Einstein defiition of madness (do ing the same thing over and over again and expecting different results) so I gave up and correctly downloaded and installed the printer drivers to restore printing features.

  How to bring back my scan feature?

  Thank you

  Hello

  Maybe you have McAfee Antivirus on your PC?

  If so try following the described procedure and let me know if this can help:

  1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Never select and confirm by clicking the button turn off.
  2. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %windir%, and then click OK.
  3. type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpoins1.old)
  4. type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpwins1.old)
  5. start the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC /Unregister. in the Run dialog box and click OK.
  6. launch the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC/REGSERVER in the Run dialog box and click OK.
  7 restart your PC
  8. run the installation file and check all difference.
  9. Once you have finished, remember to open McAfee and re-enable real-time scanning.

  If the problem persists, please specify what you use security software

  So, open the Device Manager and devote the category processors - what CPU you have on your PC?

  Kind regards
  Shlomi

• I have 3 different places in different printers 3. HP Solution Center does not recognize all but 1.

  I have 3 different printers HP F4400, officejets 6500 E710n-z and 709n in 3 different places. HP Solution Center only recognizes F4400. How can I get my Solution Center to recognize the other 2 without reistalling all the time. Here my current printer can print on 710n-z but the printer cannot scan, says no printer detected. How do I solve this

  It's very strange. Try to create a new user account and setup the printer on this account. If this does not work, try to install the printer on another computer and see if it has the same problem. Let me know what happens.

• HP ProBook b 6450: Solution Center Software for the range of all-in-one printers, HP Photosmart C4385

  I installed the package full HP printer and it has not installed the solution Center. Impossible to find. Need this to scan documents. What should I do?

  Hello

  You can download the complete software of this site features:

  http://support.HP.com/us-en/drivers/selfservice/HP-Photosmart-C4380-all-in-one-printer-series/3221640/model/3221645#Z7_3054ICK0K8UDA0AQC11TA930O2

  Once you have done this, is that you can uninstall before reinstalling the software downloaded?

  This printer model IS USED the Solution Center.

  Let us know how it goes.

  Please click the "accept as solution" if it helped to solve your problem and "Bravo Thumbs up" as an encouragement

• Inkjet printers: Solution Center: "No Options of Scan" or the "Scan settings not" in Windows 10

  When you try to start a scan from the printer control panel, displays one of the following error messages on the printer:

  • No Scan options: refer to device documentation to troubleshoot
  • Analyze the parameters are not defined

  These errors could display if your inkjet printing software is HP Solution Center.

  See the steps in this doc to solve the problem: 'No. Scan Options' or ' Scan settings not Set "message (Windows 10)

  Solutions include restarting the computer, reset the printer, changing settings in the printer software, running printing HP and doctor Scan and a few other troubleshooting procedures.

• Printers HP Deskjet 1510: ADD ANOTHER PRINTER HP SOLUTION CENTER

  My problem is the digitization.   I found ways to digitize unique photos/documents and send them to a separate email documents/photos.   I can't scan multiple documents/photos under a single file in the email.  The only way I can to do this is to use the HP Solution Center.  Is there another way to do this?

  I have a printer (C4700) located in the HP Solution Center.   I want to add a different printer (HP 1510) to the HP Solution Center.   I reinstalled the printer disc several times, etc. with no luck.   What is the best way to add a different printer?

  Thank you

  Make sure the printer is powered on and connected to your PC, then try the link below:

  http://h20180.www2.HP.com/apps/NAV?h_pagetype=s-926&h_lang=en&h_client=s-h-E016-1&h_keyword=DG-PIW

  Follow the instructions on the screen, it will download and install the latest version of the software for your printer.

  Please let me know of any problems,

  Shlomi

• HP Solution Center: my HP Solution Center does not work

  My Center solutions HP for HP Photosmart Wireless e-All-in-one printer - B110a does not work. It worked perfectly until a few days ago...

  The message says:

  "HP Solution Center cannot work because your device installation is not complete.

  Please connect the USB cable or re-run the Setup program from the installation to a network installation CD.

  "If it does not complete the installation or if you do not have the CD, access the HP help by clicking on the start menu files.

  I tried to download the software from HP but without success.

  I don't have the CD to reset the printer.

  Any solution?

  Thank you very much

  Hi @Farigola,

  Welcome to the community of HP.

  I understand that you can not use the computer Windows 10 HP Solution Center. I will do my best to help.

  Here is a link to a few troubleshooting steps that I recommend you try. When you open the link, scroll down to the section titled ""HP solutions Center can not run"or"Scan is busy or in use"error with a network-connected printer»

  HP printers - upgrade Windows 10, printer problems occur after the

  Please, try the steps and get back to me with the results.

  If it helps, will testify of my answer by pressing the 'thumbs up' below, or click on the button "Accept as Solution" if I helped you reach a solution.

  I hope this helps. Have a great day.

• HP Photosmart B110: Solutions Center installs - problems of usb - only wanted to scan - how to install the scanner part

  -With the help of HP Photosmart B110

  -Use of Tower/Desktop computer running Windows 7 64 bit

  Printer/Scanner connected via WiFi to router

  -Printer part works, I can print to this device

  -Scanner is accessible via the device Web page.

  I want the software of the scanner Solutions Center.

  I can't install the Solutions Center on Windows 7 64 bit. Setup stops and says that I have USB hardware and driver problems. USB on my Tower is USB2 and USB3 ports. Everything works perfectly and the Windows Device Manager has no problem with USB drivers/devices.

  How can I install the scanner software (or all of the Solutions Center software)?

  Tried to look in the folder for the files of instsaller scanner, nothing seems to work. (pulled other positions where it not install Solutions Center). Computer is working very well, so my only option at the moment is to look through the device's Web page, but it is not the best. And I would like to use the software. Also one third of the software "fax and scan" software and windows does not see the connected B110 (probably because it is on a network and not directly plugged into a usb port), so these two options came out.

  HP forum, help please. Is there a way to bypass the usb part? I use this device on a network. Windows 7 sees (even if only as a printer), so also want windows to consider it as a scanner as well.

  Thank you

  Hi @jedi11csa,

  Thank you very much to get back again.

  I just talked with a few colleagues in this regard, and this problem seems to be more a matter of Windows operating system, if the computer displays that USB related errors as well as the installation had not yet reached the point where it asks you to select your connection type.

  Maybe it's an investigation that is best suited for community Microsoft Forums as my resources have been exhausted in this respect.

  I hope that you are able to find the solution you need.

  Thank you.

• Can print but not scan: HP Solution Center says "HP Photosmart Premium C309g-m is disconnected!

  Hello

  I have a PC with Windows Vista Home version 6 service pack 1 for her, a connected HP Photosmart Premium C309g-m wireless printer, my work of connection Wi - Fi and is detected by the printer, but I can not scan anything from the HP Solution Center as it says "HP Photosmart Premium C309g-m is disconnected!

  I printed a wireless test page and it works.

  Any help will be appreciated!

  Thank you

  Catherine.

  Catherine, looks that you encounter some problems scanning on your computer. To start have you tried completely removing the softwware and put it back in place for drivers on the HP site downloads? Here's how I'd do...

  First of all, if you use a USB cable, be sure to remove it (it's important). Do not plug it in again until the software instructs you. Through devices and printers, programs and features and issues Device Manager and make sure that all copies, files, and programs related to the printer are removed. As indicated, and then restart the computer.

  In the menu START menu type "%temp%" and press ENTER. Here, I want you to press Ctrl + A, and press DELETE. Some files you cannot delete them, ignore these files and delete the majority that allows it to.

  Download this file and if the option to use the full setting software.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&LC=en&product=3793676&

  Install and let me know the result!

  Have a great day!

  -Spencer

  PS I recommend to try installing the printer via the USB cord and an Ethernet cord if this does not work wireless, to test methods of communication. Let me know which, if any, works.

• HP Solution Center does not detect that I've added a second printer

  I am running Vista and have the center of solutions HP (latest version) installed and have HP 2575xi connected network.

  HP Solution Center recognizes my HP 2575 x, and everything works.

  But now I have an extra F4280 HP I want to add in via the USB port on the computer.

  First I tried to install it just just pilots F4280, hoping that the HP Solution Center would detect the new printer, but it didn't.

  Then, I tried the "Full Install" from the installation disk supplied with the F4280. But he determined that I already have all the software installed, so it didn't install anything.

  Center of HP solutions certainly looks like he can handle multiple printers (it has the tabs at the top). But I can't seem to recognize the new printer.

  I could try to uninstall and reinstall. But I'm worried that HP Solution Center does not detect the 2575xi since it is a network printer.

  How can I know the HP Solution Center to detect and add my new printer?

  Thank you.

  When you install the F4280 software, and it is said that the latest version of the software is already installed, then it should give you an option to 'add a device', no?