Address problem Source DMVPN Dual-Cloud

Greetings,

I run a pivot single double-cloud DMVPN in operation phase2 (talk-to-spoke active).  I am very surprised that the question does not come upwards more often.

Here is my configuration:

Each station has its own ISP.

Each remote site has a single router connected to ISP (interface1 and interface2) 2

Each head of public-IP network is routed static (/ 32) through a single interface.

The default route is floating based on an IP SLA monitoring mechanism.

Note the following image (showing the host routes) static and default

With the two routes by default the value of the interface making DMVPN-X, a spoke-to-spoke on DMVPN-X works well.  But what of the talk-to-spoke out DMVPN?  It gets broken in the following way:

At Site A, my TunnelY Interface come from 10.2.0.2.  After it to Site B; s public IP (10.4.0.2) via PNDH, he's trying to form a tunnel spoke to rays.  But how to get to 10.4.0.2?  It uses its default route on the 10.1.0.2 interface with address 10.2.0.2 source.    A few things can happen:

(1) ISP blocks the bad sources completely, either explicitly or through uRPF.

(2) talking-to-Spoke Tunnel arrives, but assymetic routing is performed (this is rare)

(3) all sources of the ISP Nat to himself (gateways Comcast SMC this) in the example above, you see 10.1.0.1 crypto packages arriving at 10.4.0.2!  Imagine the confusion caused

In most cases, isakmp is watered.  Even if the tunnel is in place, I don't want to assymetic shaping with all the bandwidth on a single interface - I like to use actively both ISP connections.

Then... How to handle this?  I predicted it, but I thought that the mechanism of the PNDH/DMVPN would deal with this situation.  that is if I hear one speak via TunnelY and TunnelY is source on Interface2, it would naturally be to send packets on interface2.  Alas, this isn't the case.

Here are some ways that I thought to solve:

(1) because my end points are not dyamic, I could host statically road all rays are out all the interface2s, all the X on the interface1s.  (with 30 sites, it's so ugly, that I hesitate to even include it)

(2) road map of each external interface and match against the source address.  If interface1 detects a source interface2, set-next-hop to interface2.  The same thing on interface2 - if she hears a source corresponding to the IP address of interface1, value jump following interface1.  It is repeatable, but looks a bit ugly as well.

(3) poster on the forums of Cisco and see what the consensus is

Thank you much in advance.  Here are my configs sites speaks if you need:

Example of use of site A above:

(using the PKI for isakmp)

interface TunnelX
bandwidth 10000
IP 192.168.X.13 255.255.255.0
no ip redirection
IP 1400 MTU
authentication of the PNDH IP [redact]
map of PNDH IP 1.1.1.1 multicast
PNDH IP card 192.168.X.1 1.1.1.1
PNDH IP network id X
property intellectual PNDH holdtime 240
property intellectual PNDH nhs 192.168.X.1
IP tcp adjust-mss 1360
source of tunnel GigabitEthernet0/1
multipoint gre tunnel mode
tunnel key X
Tunnel DMVPN_IPSEC ipsec protection profile
!

interface TunnelY
bandwidth 10000
IP 192.168.Y.13 255.255.255.0
no ip redirection
IP 1400 MTU
authentication of the PNDH IP [redact]
map of PNDH IP multicast 2.2.2.2
PNDH IP card 192.168.Y.1 2.2.2.2
PNDH IP network id Y
property intellectual PNDH holdtime 240
property intellectual PNDH nhs 192.168.Y.1
IP tcp adjust-mss 1360
source of tunnel GigabitEthernet0/2
multipoint gre tunnel mode
tunnel key Y
Tunnel DMVPN_IPSEC ipsec protection profile
!

Route IP 1.1.1.1 255.255.255.255 10.1.0.1

IP route 2.2.2.2 255.255.255.255 10.2.0.1

IP route 0.0.0.0 0.0.0.0 10.1.0.1 Track1

IP route 0.0.0.0 0.0.0.0 10.2.0.1 250 (for failover if track 1 breaks down)

This is usually resolved by separating the ISP in before VRF (keeping global VRF inside if you chose to), allowing both titled tracks.

It's late (almost 1:00) but I think that tunnel road-via could potentially work too.

Tags: Cisco Security

Similar Questions

  • Hello, my name is Elias. I'm having problems with Adobe Creative Cloud, I wrote an email is not correct and I can't change it. How to fix?

    Hello, my name is Elias. I'm having problems with Adobe Creative Cloud, I wrote an email is not correct and I can't change it. How to fix it?

    Hello

    See the following topics:

    Bad e-mail address to sign in to Creative Cloud Desktop, how to pass to my email address?

    CC has a fake email, can not change

    Hope that helps!

    Kind regards

    Sheena

  • Problems with updating creative cloud to desktop. (error code: 2)

    Problems with updating creative cloud to desktop. (error code: 2)

    Hi Mike,.

    You can follow the article: error: "unable to install". Creative Cloud Desktop that will help you get your number sets.

    Alternatively, you can follow the thread: Creative Cloud desktop could not be updated. () Error code: 2) where this issue is already addressed.

    Let us know if it works or not.

    Thank you

    Yann Arora

  • ICH habe ein problem und zwar creative cloud steht bei den apps "Schließen sie alle Instanzen von Adobe Application Manager, um fortzufahren" was muss ich tun ich habe kein great Programm offen except creative cloud

    ICH habe ein problem und zwar creative cloud steht bei den apps "Schließen sie alle Instanzen von Adobe Application Manager, um fortzufahren" was muss ich tun ich habe kein great Programm offen except creative cloud

    Please check Update Failed: Please close all instances of Adobe Application Manager to continue

    Concerning

    Stéphane

  • Hello, I have problems with Adobe Creative cloud to open it in Windows 10


    Hello, I have problems with Adobe Creative cloud to open it in Windows 10

    Please try run as administrator. Is there any message you get at the launch of the cloud creative app?

  • I have a problem with my creative cloud subscription.

    I have a problem with my creative cloud subscription. I used the creative cloud for about 1 year now. I paid monthly fees for the Package of Adobe curriculum for about 1 year. (I pay 35200won (KRW) every month from 19) And today, I update my creative cloud to the CC2015 version, and now I have to use the free trial version. I can't use the previous version more. And I have to renew their subscription. I think that my membership things has a problem. So I think on my creative cloud membership cancellation, but my monthly payment is already in. In other words, I have to use free trial versions of the program (CC2015), but my money for June 20 to July 19 monthly rate has already contracted.  I want to get refund or some useful to the resolution of this problem. I'll wait for your answer.

    How to cancel a subscription cloud creative

    To the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone (do not support the weekend)...

    https://helpx.Adobe.com/contact.html?step=CCSN_membership-account-payment_cancel-your-memb ership_stillNeedHelp

  • I have problems to install creative cloud due to cookies dir (?) says he cannot do file/cookies: permission denied (error 13)

    I have problems to install creative cloud: he said "can't do file / Cookies: permission denied (error13).

    Try the steps below

    Click on Finder and then hold down command + SHIFT + G keys on your keyboard

    It opens go to the window of the folder, type exactly ~/Library and click Go (be sure to opeb ~/Library no/library, there will be two library)

    Then open Application Support

    Right-click on the Adobe folder

    Click on get info

    Under sharing and permissions click the icon representing a lock and unlock

    Click on the symbol and add an administrator and your user current name (if added)

    Then read and write permission for the username admin, system and all the world

    Then click the gear icon and select ' apply to the clos

    Click on the lock icon

    Try to install Creative Cloud App.

  • Unusual problem with creative application Cloud

    On one of my computers, which is a machine of Windows 8, I have problems with the creative cloud application.

    A few weeks ago, I opened the creative application of Cloud, and the window open with the top bar that has the title 'Creative cloud', the three icons on the right side shows correctly, then the black bar underneath with cloud icon, the words 'Creative cloud' and the gear showing correctly icon. However, the entire body of the page is completely empty.

    I contacted Janine Smith at the NAPP help desk and suggested that to delete the Adobe\OOBE folder. I did, and then the creative application Cloud worked as it should. I point out that I also downloaded and reinstalled the creative cloud application.

    Unfortunately, when I turned on my computer the next day I had the same problem. If someone has had this problem and has been able to get it fixed?

    I also have another problem that whenever I turn on my computer, the creative application cloud broken runs and open this application white background on my screen.

    I have a second computer running the creative cloud and have had no problems with it.

    I can't wait to hear any other comments on this issue.

    Laurent

    Yes, I'm sorry I missed OOBE in the opm.db of instructions file is located under the OOBE folder.

  • Problems to download Creative Cloud, error message.

    I have problems to download creative cloud to my computer, it starts initialization and stops at a certain point. A message appears that says error and give a number.

    Hello

    Please see the links below:

    Download error, installation or update of Cloud Creative applications

    Re: Error 201

    Kind regards

    Sheena

  • Main E-mail address problem

    Hi girls & guys.

    I have a slight problem, well a major problem. I have been using my e-mail address by satellite (tv providers) for those who may not be the same in their countries as I suppose you good people are from all worldwide its big cable. This TV provider is huge in the United Kingdom. Not only are they doing television, but they also make Internet access as well as telephone services at home that we chose to opt for a month later, when a huge bill came through and we use it only for calls that my supplier of laptop would cost more than calling. After receiving the first invoice we chose but kept the tv and internet.

    I know you think that you don't need the above info but think back to these discussion forums, I saw people asking for answers more so I hope that there is no need for that if I gave enough details.

    Since we had these services just like any other company offering them we got an e-mail address. I have published for use this email address since we signed. This goes back years and years like I said when the first iPhone came out, and then the App Store introduced.

    A good 18 months ago we changed internet service providers - our region finally got fiber ultra high speed of downloading music from iTunes in about 30 seconds flat if less. Movies about 5 minutes. I would never like to look back.

    I asked the supplier because I had changed my internet to another provider at the time good old Richard Branson was the only one to do these speeds for a higher price, but not all areas, until a supplier came out the woodwork that he offered at a reduced price and he was soon in my area.

    Immediately, I got on the phone with my previous provider of broadband and asked them if it was the end of my e-mail address. They assured me that as long as I kept their television services that I would be safe.

    Heres where my troubles begin.

    I was in bed sick. I woke up. Like most of the people when he is sick in bed I decided to check my email. I have a few email addresses. Work, Spam - these types of companies who send about 5 emails per day, but you are interested in their products. Emails that have as much security as the texts on your phone.

    Yes, I'm much a Virgin who likes things just right. Everything must be organized... I wish I thought of that when choosing my MAIN e-mail for my multiple iOS devices. That there are 6 in total in the House Inc. my new iPod touch of girls and one released beforehand and his iPad mini. She can't bear to get rid of its updated iPod touch and play constantly with my iPad pro. We do a tradition mother & daughter to watch the new Apple on Apple TV events. My husband can not seen related within a new phone or iPad. I myself change phones whenever they go out but tend to not buy the new iPads exuding the iPad pro masterpiece. I used the iPad 2 for many years, mainly for playback. When I heard of the watch and the new Apple TV I have. They are the way of the technology. so I paid a small fortune to my horror of husbands. :-)

    NOW TO THE REAL

    IGNORE THE ONE ON THE TOP. AHH I HAVE REVISED THIS TO SHOW HER THE ORIGNAL POST. IT SEEMS UNFINISHED. HERE IS MY NEW POST. IF A MOD CAN DELETE THE FIRST I'D LOVE. IM NEW LIGHT DIDN'T NEED HELP BEFORE AND THOUGHT I COULD REMOVE THIS ITEM. HERES ONE REVISED. SO SO SO SORRY

    Hi girls & guys.

    I know you think you probably don't have much info, but looking at these discussion forums, I noticed people ask more questions so I hope that there is no need for that if I gave enough details and you kind folks can help me.

    After all I am deeply upset that not only did I will be affected but my 9 year old daughter who is the grumpy genius for her age and she is known for this reason and his school even knows its potential and the Apple cult. So many things so she could spend hours in the store and really wants to take kids coding courses and even other classes that apple has to offer. She's on my icloud family to very difficult to buy for Christmas instead asks apple in that train to be only cases to cables. The kid is obsessed and goes as far to have wars with his father on android that it initiates. Steve jobs is a God for her and will buy magazines for Apple technicians. I guess it's my fault for letting his play kids apps as a child, so she threw his toys and to achieve peace, I bought his first iPod touch

    I have a slight problem, well a major problem. I have been using my e-mail address of satellite (tv providers) they also make phone broadband and at home as a reduced rate if you have all three. Then after searching this bundle was the cheapest option.

    Since we had these services just like any other company offering them we got an e-mail address. I continued to use this email address when we signed. This goes back years and years like I said when the first iPhone came out, and then the App Store introduced.

    Previosly that while at the time where Bebo was the major social media of the era that preceded the iPhone hacked my msn email well. After having contacted them, they told me there was nothing to do.

    A good 18 months ago we changed internet service providers - our region finally got fiber ultra high speed of downloading music from iTunes in about 30 seconds flat if less. Movies about 5 minutes. I would never like to look back.

    NOW TO THE REAL PROBLEM

    In hindsight I should have subscribed to a secure e-mail. Later, I received an e-mail from my TV provider that Yahoo was now the main source of the email. I could connect via yahoo and my address of providere tv.

    Even though I had a very strong password I changed every few months containing symbols as letters and numbers, it seems that Yahoo is not at all certain and they hacked as I discovered thanks to a search when my iPhone asked me to put my password. Later, I went on my tv providers email and my password is not valid. So I tried the same yahoo. Then, I managed to change my password by an alternative email. That seemed to do the trick...

    Until my partner received a strange e-mail telling him he could make thousands online. Since this is my email he opened. It contains no content malious, but he went to meet ask me "what you send me" and saw that the reply address was completely different.

    On hearing this I wrote then a password that I don't even remember. I do not store on my phone. I never told anyone and I put it in my safe should I need because it was a welcome e-mail and not necessary for work and does not have all the notes beside her.

    Since the space of 4 months, I had to change twice. WHY THESE PIRATES CAN GET IN.

    Before these events August 2015, I received an e-mail from Apple telling me that my icloud had used a device that was not recognized and ignore if it wasn't me. That day, I was sick in bed at 9.04 and my partner was at work that does not allow you to access things on a computer.  If necessary access I would just access it through the address main iCloud I have used twice. Even my iCloud email has not been given. I hardly use it. Although I can change that because my old e-mail address is a responsibility.

    I took immediate action on my Apple ID. I changed my security questions and the password. Asked for a check of the 2 step. Change my phone number because those people might find a way to get my number. I made sure my PIN code is sent via my new number or the devices that I use.

    IT WORKED a TREAT - I'm extremely lucky that they never blocked my access to my Apple ID after research they could do this.

    I'm now very careful to change my password. I went as far as contacting the apple team on my ID. They told me I had done the right thing and could see that I changed the reg passwords. It was a little bit of time before I start to have problems of electronic mail at least 3 weeks before.

    WHAT CAN I DO

    As I have explained above my TV provider changed their accounts with yahoo, but forever be able to connect via the address through my tv provider and my ex provider broadband. It is not without danger. This time the password changed again. However, I stupidly changed the security issue and could not change. It seems that I'm locked unless I have a phone number. It will be hard to do since I am with their services.

    I think they can ask me to change my email address but I still have contacts there and so on. So that they could keep the account open just for this reason.

    THE FIRST IPHONE WAS RELEASED IN 2007

    Can you imagine losing all your data that you have spent thousands on since then all be wiped as I guess I would need to put in place a new ID to a protected e-mail address as security iPhone that has a verification of the 2 step like Google owes much to my relief.

    My daughter would lose all his tricks for? It does not download everything I do. It would still show on the cloud if I got a new ID and put it in the family? I would then be able to delete my original account and continue with my new name?

    I know some time ago very very long before Apple had iPhones and others that my friend found his music, but it was something unique. This will come back some time ago. Only, she was extremely on the moon as they never do this, but she was an avid collector of music and crying. I've see it ask and don't know even it was not what a friend. It was well before iCloud. They said that they would do it.

    Surely, there must be a way to turn it. Like all transactions that I bought through my card number and even kept receipts of all I bought the iPhone, etc. and be able to put my new ID by family in icloud. Surely other people emails were hacked. I still find a rude apple employee. Even the community of support here is really nice. Regardless of the question.

    I'm extremely sorry for the long post. I thought that if I developed a little bit more to show what I did. Maybe someone can help me in my perdicument.

    Thank you

    Sam

  • problem in dmvpn

    Hello

    I'm trying to configure the DMVPN with the following topology:

    I configured simply PNDH and EIGRP, the permanent tunnel are there, but the arnt speaks of talking about tunnel, s rays routing tables show that each Department does not know the subnets to other rays.

    normally the hub shoud disseminate this information to the rays I don't know why he is not doing.

    This is the routing table for each device.

    HUBS:

    ISP:

    Mentioned for example 1:

    I tried a traceroute on Spoke1 to reach Spoke2 subnet and I got this:

    Here are the configs:

    HUBS:

    !

    version 12.4

    horodateurs service debug datetime msec

    Log service timestamps datetime msec

    no password encryption service

    !

    HUB host name

    !

    boot-start-marker

    boot-end-marker

    !

    !

    No aaa new-model

    !

    resources policy

    !

    memory iomem size 5

    IP subnet zero

    !

    !

    IP cef

    no ip domain search

    IP domain name lab.local

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    interface Tunnel0

    bandwidth 1000

    the IP 10.0.0.1 255.255.255.0

    no ip redirection

    IP 1400 MTU

    authentication of the PNDH IP ENIMISTE

    dynamic multicast of IP PNDH map

    PNDH id network IP-123

    property intellectual PNDH holdtime 300

    IP tcp adjust-mss 1360

    delay of 1000

    tunnel source 212.67.1.2

    multipoint gre tunnel mode

    6 tunnel button

    !

    interface Loopback0

    IP 172.16.4.1 255.255.255.0

    !

    interface Serial0/0

    IP 212.67.1.2 255.255.255.0

    series 0 restart delay

    !

    interface Serial0/1

    no ip address

    Shutdown

    series 0 restart delay

    !

    interface Serial0/2

    no ip address

    Shutdown

    series 0 restart delay

    !

    interface Serial0/3

    no ip address

    Shutdown

    series 0 restart delay

    !

    Router eigrp 123

    Network 10.0.0.0 0.0.0.255

    network 172.16.4.0 0.0.0.255

    No Auto-resume

    !

    no ip address of the http server

    no ip http secure server

    !

    IP classless

    IP route 0.0.0.0 0.0.0.0 212.67.1.1

    !

    !

    !

    !

    control plan

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    Line con 0

    exec-timeout 0 0

    privilege level 15

    Synchronous recording

    line to 0

    INTERNET SERVICE PROVIDER

    !

    version 12.4

    horodateurs service debug datetime msec

    Log service timestamps datetime msec

    no password encryption service

    !

    ISP hostname

    !

    boot-start-marker

    boot-end-marker

    !

    !

    No aaa new-model

    !

    resources policy

    !

    memory iomem size 5

    IP subnet zero

    !

    !

    IP cef

    no ip domain search

    IP domain name lab.local

    No dhcp use connected vrf ip

    DHCP excluded-address IP 212.67.0.1 212.67.0.2

    !

    pool IP dhcp URN

    network 212.67.0.0 255.255.255.0

    router by default - 212.67.0.1

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    interface Serial0/0

    IP 212.67.1.1 255.255.255.0

    IP nat inside

    IP virtual-reassembly

    series 0 restart delay

    !

    interface Serial0/1

    no ip address

    Shutdown

    series 0 restart delay

    !

    interface Serial0/2

    no ip address

    Shutdown

    series 0 restart delay

    !

    interface Serial0/3

    no ip address

    Shutdown

    series 0 restart delay

    !

    interface FastEthernet1/0

    !

    interface FastEthernet1/1

    !

    interface FastEthernet1/2

    !

    interface FastEthernet1/3

    !

    interface FastEthernet1/4

    !

    interface FastEthernet1/5

    !

    interface FastEthernet1/6

    !

    interface FastEthernet1/7

    !

    interface FastEthernet1/8

    !

    interface FastEthernet1/9

    !

    interface FastEthernet1/10

    !

    interface FastEthernet1/11

    !

    interface FastEthernet1/12

    !

    interface FastEthernet1/13

    switchport access vlan 10

    !

    interface FastEthernet1/14

    switchport access vlan 10

    !

    interface FastEthernet1/15

    switchport access vlan 10

    !

    interface FastEthernet2/0

    IP 192.168.137.2 255.255.255.0

    NAT outside IP

    IP virtual-reassembly

    automatic duplex

    automatic speed

    !

    interface Vlan1

    no ip address

    !

    interface Vlan10

    IP 212.67.0.1 255.255.255.0

    IP nat inside

    IP virtual-reassembly

    !

    Router eigrp 123

    network 212.67.0.0

    network 212.67.1.0

    No Auto-resume

    !

    no ip address of the http server

    no ip http secure server

    !

    IP classless

    !

    IP nat inside source list 1 interface FastEthernet2/0 overload

    IP nat inside source list 2 interface FastEthernet2/0 overload

    !

    access-list 1 permit 212.67.0.0 0.0.0.255

    access-list 2 permit 212.67.1.0 0.0.0.255

    !

    !

    control plan

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    Line con 0

    exec-timeout 0 0

    privilege level 15

    Synchronous recording

    line to 0

    exec-timeout 0 0

    privilege level 15

    Synchronous recording

    line vty 0 4

    opening of session

    !

    !

    end

    SPOKE 1

    !

    version 12.4

    horodateurs service debug datetime msec

    Log service timestamps datetime msec

    no password encryption service

    !

    hostname SPOKE1

    !

    boot-start-marker

    boot-end-marker

    !

    !

    No aaa new-model

    !

    resources policy

    !

    memory iomem size 5

    IP subnet zero

    !

    !

    IP cef

    no ip domain search

    IP domain name lab.local

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    interface Tunnel0

    bandwidth 1000

    the IP 10.0.0.2 255.255.255.0

    no ip redirection

    IP 1400 MTU

    authentication of the PNDH IP ENIMISTE

    map of PNDH IP 10.0.0.1 212.67.1.2

    map of PNDH IP multicast 212.67.1.2

    PNDH id network IP-123

    property intellectual PNDH holdtime 300

    property intellectual PNDH nhs 10.0.0.1

    IP tcp adjust-mss 1360

    delay of 1000

    source of tunnel FastEthernet0/0

    multipoint gre tunnel mode

    6 tunnel button

    !

    interface Loopback0

    IP 172.16.1.1 255.255.255.0

    !

    interface FastEthernet0/0

    DHCP IP address

    automatic duplex

    automatic speed

    !

    Router eigrp 123

    Network 10.0.0.0 0.0.0.255

    network 172.16.1.0 0.0.0.255

    No Auto-resume

    !

    no ip address of the http server

    no ip http secure server

    !

    IP classless

    !

    !

    !

    !

    control plan

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    Line con 0

    exec-timeout 0 0

    privilege level 15

    Synchronous recording

    line to 0

    exec-timeout 0 0

    privilege level 15

    Synchronous recording

    line vty 0 4

    opening of session

    !

    !

    end

    Sorry for the implementation of a large number of photos

    Thanks in advance

    Abdelilah

    Try adding no ip split-horizon eigrp number and no ip next-hop-self eigrp number commands on the hub, split horizon prevents the rays to get the update by the other spoke and the other command is to ensure that the hub does not change the ip address of the next jump with its own ip address.

  • address problem complete

    I don't know if I'm looking at the right place, but maybe someone can help with information.

    Previous Verizon DSL, now Frontier DSL for about 2 months (they bought Verizon).

    Until this morning, by entering the url of all that was needed was enough information (ie: "Amazon" for amazon.com.) ("drudge" for drudgereport.com, etc.) then FF would complement the address and ".com", ".net", etc., and then I went to the desired location.

    However, this do when used, rather than fill in the address and arrive at my destination, I would be redirected to a "Yahoo search assist border" page where I could then click on the result and get on the site, I desired. Only by typing the entire URL could bypass the redirect.

    I checked to see if my "true/false" for FF have been in operation required and they were. Scan virus Ran and came clean so contacted technical support online frontier, since Yahoo is the partner of their research and I continued to meet at the border home page.

    After pulling up from my account, the rep online (they have only one, only ONE, for the entire online tech support staff) told me that he has never heard of just by typing in keywords for addresses and that he STILL had to enter in all of the thing.

    O.o

    Then, he suggested I do a Google search for my problem.

    o.O

    Zero I cancelled the session online and called to the 24/7 phone support. At the time where my account information were fired upward with the phone rep, that the problem has disappeared as if by magic.

    O.O

    So my questions. Was it a coincident temporary bug with FF (I'm a beta tester crash test dummy), a bug not taken with my virus/malware scams or... Path of the border to distract me from Yahoo to generate advertising revenue.

    The calendar shows the third option, it's the first and only time this has happened since the online in 2003, but before we get IN. with Frontier, I felt I needed more information.

    Thanks in advance!

    I couldn't find specific information on the border, but many ISPS have begun to use a 'area of assistance Service' for stealing web addresses which do not solve exactly as you typed them. You should ask them how you can unsubscribe from this service.

    http://www.theregister.co.UK/2009/07/28/comcast_dns_hijacker

    Here is the page I should use with Comcast to disengage from Comcast 'service '. He seems to stand for 6 to 8 weeks, and then I have to reset this 'service' by the opt-in and then "opting out" all over again the next day.

    http://DNS-opt-out.Comcast.NET/Help-index.php

  • network security IP address problem

    I have a home secure wireless network, lately I get an error message that my IP address has been used by another computer on my network even when my other computer is not in use, it seems as if someone logging on my network and sharing my IP without knowing me is there any software for network access Protection that would allow me to monitor my network also how do you secure my IP address I use a vista software and my firewall is always turned on.  Essentials windows also display the State of my computer is protected.

    I see that sometimes on my wireless network.  I think it unlikely that someone breaks in your network.  It is more likely that your wireless router is getting confused.

    If this happens again, restart your router by unplugging the power supply for a few seconds, then in him plugging wireless.  This should solve the problem.  You can see the list of the router DHCP clients to see what computers are connected. Owner, Boulder computer Maven

  • IP address problem

    Hello again,

    Hello again,

    Well, I could put everything up with linksys tech people but unfortunately I am not able to connect to the outside of my home monitoring system. I subscribed to TZO.COM and used their support troubleshooting to solve my problem, PortDetective, etc. and still no success. My cousin geek could not connect to my router or my camera. Starts seems based on its expertise, my ISP Embarq (dsl), now called Qwest is the problem. He said that the ability of tzo.com to update my IP address is not enough if my ISP has a permanent block on my IP address. If this is true, it will be an additional charge of $10 / month... is there another option for me?

    Thank you

    It won't change any settings on the router and it will continue the work... It's good to hear that your problem has been set now... Enjoy

  • Leave the connection due to release/renew IP address problem

    Hi there - I have an Inspiron 23 model 5348, connected to a router of the BT Home Hub 5 running Windows 8.1. Whenever I wake the computer from sleep mode and often even to start it upward, that I have no internet connection. I have release/renew the IP address, and the connection is re-established for a period of time.

    This happens on my inspiron wired or wireless connected. I updated the router, changed the wires, reinstalled the drivers for network devices, changed the term of the lease on the router for 21 days and used a static IP address, bit, nothing seems to work.

    It only occurs on the Inspiron. None of my other devices give up their connection.

    Any ideas what is the cause?

    For anyone else having this problem this page should sort

    http://forumhelp.dyndns.info/networking/staticip.html

Maybe you are looking for

  • Bootcamp only gives me the option to install the secondary internal SSD flash disk. Mac Pro mid-2010

    I have a Mac Pro (mid 2010) and spin El Capitan (10.11.5). I have an SSD that I boot OSX of. I have a 4 TB harddrive that store data on. And I just installed a Virgin SSD (same type as my drive OSX) I want to install Windows 8 on. When you run Bootca

  • Multi site imagery?

    Hello We currently have 6 locations of office on the same network. At HQ, we have an imaging server that we use for all our macbooks image. Is it possible to do so that when I do changes on the hand that it replicates to the other minis?

  • For Qosmio f10 car adapter

    Hello just wanted to know if there is a cigarette lighter adapter or Jack etc that I can use to recharge my laptop Qosmio F10 in the car as the holiday im soon and it will run out of battery after 2 hours or so, so ask if theres something like that t

  • Apple TV4 Bluetooth keyboards

    I can't get my apple TV4 to recognize my bluetooth Apple keyboard. It's the battery three times. Do I need one of the newer models?

  • Link to the variable of the scan engine

    I have the attached labview, the settings on a variable diagram and shared block.  In my project I have a cRio who is using the analytical engine and signals some time RTD.  in my computer, I have a shared variable that I have an alias to the scan on