Leave the connection due to release/renew IP address problem

Similar Questions

• Cannot complete the connection due to an incorrect username or password

  Hello

  I installed a new free esxi 6.0 server. The installation is successful, but when I try to connect to the VMware vSphere client keeps giving me this error:

  Cannot complete the connection due to an incorrect username or password

  Username and password are correct

  Can someone help me?

  THX

  Just a guess. Are you a password with special characters without selecting the required keyboard layout (i.e. leaving us / English)?

  You are able to connect on the DCUI (console)?

  André

• vCenter + 3 guest - root - cannot complete the connection due to an incorrect username or password

  Hi guys,.

  It is the latest attempt to address this issue the nice way.

  We have 3 guest running VMware essentials 5.5 with Veeam B & R (recently updated v9)

  I use a unit of vCenter hosted in one of the ESXI servers. Has joined the field - but no authentication SSO or AD has never been setup for it.

  Since yesterday, I am unable to connect to no machines with my password local root - or ESXI and vCenter. I almost use the same password for the hosts and vCenter (except the vCenter last character that is special) passwords have not been changed for 400 days. (I can remember in the past I have problem with my account lockout and I had to do something in vCenter turn it off - so I guess that this has been done)

  I am guard on getting "cannot complete the connection due to an incorrect username or password" when I try to connect via vSphere client, web browser, SSH or the physical server.

  Funny but my server of Veeam speaks to vCenter as nothing happened. Veeam management shows 400 days since the last change of password for root. Also, I am able to rescan vCenter successfully. If I ask for identifying information another user from the credentials manager in Veeam he dismisses them. So somehow Veeam is still talking to vCenter...

  It's just incredibly odd that two separate passwords for ESXI and vCenter are no longer works...

  Any feedback is greatly appreciated!

  Apparently, was my old brain!

  Just enter the password once again with a slight difference and it worked. @

• The VRM Agent errors in vCAC 6.1 - cannot complete the connection due to an incorrect user name or password.

  Receive errors of VRM subject officer in vCAC 6.1 on a random/intermittent basis.

  I read the other posts documenting similar errors but in almost all of these positions, these errors arose following a request by commissioning has failed, a misconfigured in vCO vCenter Server Plugin interface or some other connection failure distinguishable. In my case, this condition is intermittent (at least it seems to be) and resolves in the end. I have no problem of supply of virtual machines on one of my endpoints configured in vCAC and, as far as I can tell, the network appears to be stable.

  At this stage since there seems to be no significant or negative impact for the health of the entire system, (for aesthetic reasons only), I usually end up the purge of these error messages in the SQL DB Table. I wonder if anyone else has this problem or clues as to what may be the cause of this?

  Here are some of the typical error log file.

  [05/06/2015 11:54:01] [Debug]: this exception has been taken:

  System.Web.Services.Protocols.SoapException: Unable to complete the connection due to an incorrect user name or password.

  at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse (SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)

  at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke (String methodName, Object [] parameters)

  at VMware.vSphere.VimService.Login (ManagedObjectReference, String userName, String password, String locale _C)

  at DynamicOps.Vrm.Agent.vSphere.VSphereSession.Connect (String username, String password)

  at DynamicOps.Vrm.Agent.vSphere.VSphereHypervisorServiceProvider.GetVcenterInstanceUuid (ManagementEndpoint managementEndpoint)

  at DynamicOps.Vrm.Agent.vSphere.VSphereAgentService.GetHypervisorData)

  at DynamicOps.Vrm.Agent.Core.VRMCoreAgent.SendPingReport)

  at DynamicOps.Vrm.Agent.Core.CoreAgentBase.SendPingReportLoop (Object sender, ElapsedEventArgs e)

  [05/06/2015 11:54:01] [Error]: <? XML version = "1.0" encoding = "utf-16"? >

  < Boolean > false < / Boolean >

  This exception has been taken:

  System.Web.Services.Protocols.SoapException: Unable to complete the connection due to an incorrect user name or password.

  at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse (SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)

  at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke (String methodName, Object [] parameters)

  at VMware.vSphere.VimService.Login (ManagedObjectReference, String userName, String password, String locale _C)

  at DynamicOps.Vrm.Agent.vSphere.VSphereSession.Connect (String username, String password)

  at DynamicOps.Vrm.Agent.vSphere.VSphereHypervisorServiceProvider.GetVcenterInstanceUuid (ManagementEndpoint managementEndpoint)

  at DynamicOps.Vrm.Agent.vSphere.VSphereAgentService.GetHypervisorData)

  at DynamicOps.Vrm.Agent.Core.VRMCoreAgent.SendPingReport)

  at DynamicOps.Vrm.Agent.Core.CoreAgentBase.SendPingReportLoop (Object sender, ElapsedEventArgs e)

  Ron thx.

  Indeed, it turns out that our network has been unstable with intermittent packet loss and the routing of the shortcomings... The main culprit seems to have been Channeling of Virtual Port (VPC) behaves poorly or badly configured on a physical switch uplink... VPC, in our case, was created to supplement our vSphere Teaming and failover policy settings.

• Cannot complete the connection due to a bad user name or password

  Hello. I have a strange problem. I am beginner with VMware products. I installed ESXi on HP proliant 180 gen9 6.0.

  After that, I used converter stand alone to migrate the linux server. Still was very good, everything works. But the next problem emerges after that two or three time - when I try to connect to remote ESXi it telling me "cannot close connection due to a bad username or password." No matter how I connect via Vsphere Client, SSH, or simply click on the link "Browse data in the host inventory warehouses" in the browser. In addition. I can connect with the same login\password using usb keyboard connected to the server.   Password change has no effect. It allows only a reset to default. And then it starts to pitch up and anywhere.  I read somewhere that the problem occurs if the set dns and host name on ESXi, I put not DNS so that only the host name. Another problem not defined RAID controller, but I don't think it is interconnected, maybe I'm wrong? I'd appreciate any ideas and help.

  
  

  Hello. Ty for answer. Problem solved. I started to use same keyboard as ESXi server option. After the default US in US int problem has resolved. I don't know why it works with default US for a few days before.

• Close TCP leaves the connection open

  Hello guys,.

  I use an ethernet connection to query the data of 2 units of acquisition of sensors.

  This request is motivated by a second timed loop period 30.  As this rate is very low, I have the close connection and reopen it each time.

  I try to connect to the device via the same 2 ports each time, 50,000 and 50 001.

  I get the error message that the connection is already used for a close connection of TCP executed without error before.

  The network view TCP tool monitor gives me the screen following [network_connections.png] when I run w/o specifying the local port. It seems that the previous connection are not adequately closed and are always in the TIME_WAIT state. This list is continuouslly prices, leading to errors of networks. (For the units IP address is 200.0.4.152 and 153)

  Could you please help me on this?

  Thanks in advance

  Kind regards

  Bruno

  Hello

  This seems to be a common behavior:

  http://digital.NI.com/public.nsf/allkb/119D334B8B78732E862574E1006D1839

• Original title: the connection card wireless network with windows 7 problem

  I have a dv6 Notebook PC HP clubhouse, 64-bit Windows 7 Home Premium, I bought end July2010. H-he detects the wireless network but will not connect. just if I'm until modem.but colse it smt connect to the deffernt wireless network. What is happening and where do I go to fix this problem.

  Hello

  1 have had any changes made on the computer before the show?

  2. do you get an error message when you try to connect to the wireless network connection?

  Method 1:

  First of all, I suggest for the link and try to run the troubleshooter and check if it helps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  I suggest you to refer to the article and see if it helps:

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-fix-network-adapter-problems

  Let us know if you need more assistance.

• Y560P card number: sleep mode and headset to the connected socket

  I searched the forum as much as I could and did not find this issue to be considered.

  So, sometimes I listen to music with headphones or even after a Skype call, I leave the connected headphones. If I put the laptop to sleep and wake it back up, unplug the headphones will not return my sound setting to speakers; I can't hear any sound if I plug the headphones in the back.

  I tried to connect and the new: no change. I tried to disable and re-enable "Realtek High Definition Audio" in the Device Manager: no change. Uninstall and reinstall it wouldn't be a good solution if it had to be done all the time. The only thing that it returns to normal is turning works again... typical I.T. solution. Is there a driver update to solve this problem?

  Speaking of driver updates, I guess that I can't find any BIOS update or updates to driver for the ideaPad due to the recall of Sandy Bridge?

  UPDATE: sorry... found the lenovo support site area sub consumer that is different from the IBM one... Argh...

  judge that?

• [Issue] The connected VPN SX20, that I need more?

  Hello. I'm number one special facfing which I have never seen elsewhere.

  Please, see this photo belowed.

  

  We use the H323 Protocol with mode of ISDN G/W 3241 interal Gatekeeper to call leave SX20 to other SX20.

  You may feel weired because we do not use VCS, but instead of him, we use the internal ISDN G/W Gatekeeper.

  ISDN to IP and IP to ISDN call works well. but on the connected VPN SX20(Building D) has some problem.

  He has no problem on H323 mode "live". but, once it changed to H323 mode "keeper."

  It seems to see on ISDN G/w registed.

  but when we begin to call, building D SX20 is keeping just "Composition" State and never step of 'connection '.

  The only one I hear is unlimited ringtone SX20 building D, and the opposite of SX20 stopovers to

  Building D SX20 call also gives the same result. "the composition of demonstration" but no signal has not reached side opponent.

  This problem appeared on the VPN connection, so I need to check what I most when the value on the VPN connection for telepresence.

  Dose anyone know about this issue?

  If you want to use the feature GK, you use the gk mode.

  The VPN has very probably some treatment of layer 3 for h323 or some ports are not open.

  Behind the VPN endpoint and the rest of your ip based video systems must have

  direct ip connectivity without NAT and required ports must be open.

  And for h323, it's a whole lot of ports.

  Especially if the public ip and uri dial connectivity is on the future roadmap I would inquire

  using a vcs or cucm setup.

• How to troubleshoot the connectivity on XP - SP3 guest vm

  I'm at a loss for which is why some of my vm do not connect the network correctly and hoping that some users of the forum could point out where I should be looking.

  When I create a new virtual machine from windows xp and connect to the network I get the message "limited connectivity" in the task bar, I can't do a ping from any machine and the virtual machine gets an issued a 169.meta xxx IP address.

  • My virtual machine is configured with a network adapter to connect to the power on

  • The group used vSwitch & port is configured and allow the other vm to access the broader network of the same esx host

  • The vSwitch is set to 56 ports, but I have nowhere near that number of active virtual machines connected

  • If I try to repair the connection it fails to renew my IP address

  • VMware Tools is installed and started

  • DHCP is enabled

  • A new SSID is generated for each new virtual machine

  • The default gateways & DNS are empty, but it's the same setting used by other physical machines that can successfully connect to the network

  Anyone able to point me in the right direction?

  I always suspected your DHCP.  You must obtain access to the DHCP logs or check with someone who got access to see what is happening on the leases.

  -Surya

• What is the most important of the "connection specific suffix DNS" and how to change (update) it?

  When you're wondering why the downloads were sometimes slow, I checked the operatinginstructions wireless driver (which I've updated), then the IP config.  Notice the suffix DNS specific connection set to a provider I use is no longer.
  Does it really matter whether fixed (portable moving)?  And if not, how one change it?

  System: Dell Precision M4300
  Windows Vista Ultimate - Ran ipconfig

  Microsoft Windows [Version 6.0.6002]
  Copyright (c) 2006 Microsoft Corporation.  All rights reserved.
  Windows IP configuration

  Bluetooth network connection Ethernet card:
  State of the media...: Media disconnected
  The connection-specific DNS suffix. :

  Wireless network connection Wireless LAN adapter:
  The connection-specific DNS suffix. : nycap.rr.com

  Link-local IPv6 Address...: fe80::3063:1611:9d1b:bf69% 11
  IPv4 address...: 192.168.1.100
  ... Subnet mask: 255.255.255.0.
  ... Default gateway. : 192.168.1.1.

  Ethernet connection to the Local network card:
  State of the media...: Media disconnected
  The connection-specific DNS suffix. :

  Card tunnel Local Area Connection * 6:
  State of the media...: Media disconnected
  The connection-specific DNS suffix. :

  Card tunnel Local Area Connection * 7:
  The connection-specific DNS suffix. :
  IPv6 address: 2001:0:4137:9e50:2081:31db:3f57:fe9b
  Link-local IPv6 Address...: fe80::2081:31db:3f57:fe9b 12%
  ... Default gateway. : ::

  Card tunnel Local Area Connection * 13:
  State of the media...: Media disconnected
  The connection-specific DNS suffix. :

  Card tunnel Local Area Connection * 14:
  State of the media...: Media disconnected
  The connection-specific DNS suffix. : nycap.rr.com

  I moved about 6 months ago and I'm going through is no longer nycap.rr.com.  Instead, I use nc.rr.com

  Hi HS Abdallah,

  Thank you for posting!

  You can specify the DNS suffixes specific connections for adapters configured statically and configured in DHCP on the DNS tab in the Advanced TCP/IP settings dialog box. In this dialog box, you can also specify if the customer is using its DNS suffix specific connections in addition to its primary DNS suffix
  See the article configure a connection-specific DNS suffix
  http://support.Microsoft.com/kb/305553

  Thank you and best regards,
  Abdelouahab Microsoft responds to the technical support engineer

• 4012 [1211140]: exceeded the limit for connection cache - how can I solve this problem

  "" "QUOTE-2016-11-18 09:40:48.680000 UTC - 4012 [1211140]: exceeded the limit for connection cache: imap://[email protected]@imap/ writes" rel="nofollow">-mail.outlook.com:993/select>/Drafts 09:40:48.680000 2016-11-18 UTC - 4012 [1211140]: queues url: imap://[email protected]@imap/ writes "rel="nofollow">-mail.outlook.com:993/select>/Drafts 2016-11-18 09:40:48.680000 UTC - 4012 [1211140]: seen play queue url: imap://[email protected]@imap/ writes" rel="nofollow">-mail.outlook.com:993/select>/Drafts 2016-11-18 09:40:48.680000 UTC - 4012 [1211140] ': creating instance of Protocol to play queue url: imap://[email protected]@imap/ writes "rel="nofollow">-mail.outlook.com:993/select>/Drafts 09:40:48.680000 2016-11-18 UTC - 4012 [1211140]: proposed url = drafts folder for connection has to wait = FALSE can run = FALSE-EXTRACT

  Excerpt from log file showing the problem.

  Have been using a Hotmail account by using IMAP on Thunderbird for a long time without problem. Then BANG. 02:00 and it refuses to work. TB message is 'server xxxx offline. The server may be down or there may be a network problem. »

  Problem with google, a lot of people seems to have. Usually involves the connection cache limit. Located on logging - you can see the result above. Connection cache limit. Set it to 1. No help.

  Contact Microsoft technical support. They were absolutely * no need, just make the assumption that the error lies between the keyboard and the Chair. They had me remove the Treasury Board account and recreate it. Which it won't, as it bangs against the connection cache limit. They say Thunderbird problem and refuse to help more. Help, please.

  Issue can be closed.

• Receives the following message "Refreshing IP failed. Please release/renew IP manually.

  Hello experts,

  I have met now a question that I don't seem to find the answer. I'm under CISCO NAC version 4.5.1 in HA - OOB. A 3750 Switch running c3750-advipservicesk9 - mz.122 - 44.SE6.bin version. NAC AGENT is 4.5.2.0 and runing SSO.

  The problem I'm having is that when I connect to a given port, I get the automatic 'loging' screen after awhile he autenticates as expected, but I got a new message "Refreshing IP failed. Please release/renew IP manually. The strange thing here is that although he sends this message, I get in the vlan of confidence.

  My question is why he received this message? I'm not run DHCP, it is in the pass-tires, and guests have their configured local IP addresses.

  I don't think there is a problem with any device, due that it authenticates, but it always sends the message. It IS like a cosmetic bug or something like that?

  Thanks for your help my friends

  Tony

  Please use the vlan access by default for this setting and see if the problem goes away.

  Thank you

  Tarik Admani

• Reinstalled XP and now unable to connect to the internet, dsl provider says the leaves to reinstall the connection LAN how fix this?

  Original title: windows xp.

  reinstalled xp and now unable to connect to the internet, dsl provider says the leaves to reinstall the connection LAN how fix this?

  Hello

  Go to the website of your computer manufacturer > drivers download Section > put your computer model number > operating system > Search adapter network, pilots etc. for her.

  Get graphics, sound while you're there.

  You should always do a reinstallation.

  Use the computer that you use to make the foregoing > download and save in this office > copy of Flash Drive > then install in another computer.

  See you soon.

• Live Mail is not time on a bad/hung e-mail server connection automatically, which leaves the rest / other e-mail accounts unread for long without affecting the user.

  Live Mail is not time on a bad/hung e-mail server connection automatically, which leaves the rest / other e-mail accounts unread for long without affecting the user.
  BTW, how to force Live Mail to jump/break current hung connection without restarting the Live Mail? It does appear that a stop button, but no jump to Live Mail key control winodw?

  Hello

  1. do you use the Windows Live Mail email client?

  I recommend you ask your question on the dedicated Windows Live forums. Here is the link for the category Windows Live Mail.
  http://windowslivehelp.com/product.aspx?ProductID=15

  I hope this helps.