ADF table filter - date column - in the table data type is timestamp

Similar Questions

• what filter first column by the oracle optimizer

  If anyone can help to understand what filter first column by the optimizer oracle by example below and why?
  
  Select * from emp where ENAME = 'FORD '.
  AND SAL = 3000;

  Hello

  Look at the MAP of the EXPLAIN command.

  All things being equal, if there is more distinct values of ename, Sal, then it's probably looking for "FORD" first.

  For example, the table has 100,000 rows and there are distinct 10 000 distinct enames and 100 sals, ename and sal are indexed, but there is no combined index.
  If you are looking for by sal firstly, this means that you wait about 1,000 lines of the search index, and then you have to test each of these 1,000 rows for the right ename.
  If you are looking for by ename, first of all, it means that you wait about 10 lines of the search index, and you will only test each of these 10 rows for the sal on the right.
  The order in which the terms were written will count.

  Published by: Frank Kulash, April 2, 2012 07:54

• Filter a column with the value of another

  Hello. Hope someone can help with this... On my search page, I want to use the value of the first list/drop-down menu to filter the values of the second list/menu. I use PHP and DW 8.0.2.
  
  Example: The first column has each of the 50 States. second column has 3 000 counties. If a user selects New Jersey, I want to just 21 NJ counties to appear as options in the second menu downwards rather than 3 000 counties.
  
  First Recordset works very well for the States. But in my second recordset, I say 'select distinct County of the said County WHERE AS var1'... and var1 is $recordset1 [County]. But the 2 column is empty. How can I actively pass the value of the first column in the second while the user is still on the same page?
  
  Sandman

  >>
  Assuming that your table has a field named "State":
  «select County of States WHERE state = "var1""
  >>

  You can use this solution when the first menu page 1 and the second menu on page 2 (IE passing the value of a query on page 2), but as assumingly, you need to have this functionality within a single page, basic need based on a javascript solution 'drop-down menus of dynamic load' to load the menu2 - options "in situs.

  There is an extension for Dreamweaver stand alone for this on the site of Tecnorama , that also wants to work without the relationships between the tables, in other words, with the data in a table, which matches your scenario.

• Extract a column of the cursor to type set

  Hello
  I have a procedure that returns a complex cursor (all columns are known) - I need to enter my type defined a single column of a cursor (number table - I use it later in the SQL statement) - what is the best way to get it? Or is it possible to use received cursor (column) directly in sql? (I would avoid if possible iteration)
  Concerning
  BartlomiejD

  How can I load m_cCursor in retNA (TNUMBERARRAY) colNum?

  Here's a simple way

  SQL>  CREATE OR REPLACE PACKAGE pkg
  AS
     TYPE tcursor IS REF CURSOR;
  
     TYPE tnumberarray IS TABLE OF NUMBER;
  
     PROCEDURE retcursor (retcursor OUT tcursor);
  
     PROCEDURE retnumberarray (retna IN OUT tnumberarray);
  END pkg;
  /
  Package created.
  
  SQL>  CREATE OR REPLACE PACKAGE BODY pkg
  AS
     PROCEDURE retcursor (retcursor OUT tcursor)
     AS
     BEGIN
        OPEN retcursor FOR
               SELECT 'A' cola, 'B' colb, 'C' colc,
                      CURRENT_TIMESTAMP cold, LEVEL colnum
                 FROM DUAL
           CONNECT BY LEVEL <= 20;
     END retcursor;
  
     PROCEDURE retnumberarray (retna IN OUT tnumberarray)
     AS
        m_ccursor   tcursor;
     BEGIN
        retcursor (m_ccursor);
  
        SELECT x.COLUMN_VALUE.EXTRACT ('ROW/COLNUM/text()').getnumberval ()
          BULK COLLECT
          INTO retna
          FROM table (XMLSEQUENCE (m_ccursor)) x;
  
        FOR i IN 1 .. retna.COUNT
        LOOP
           dbms_output.put_line (retna (i));
        END LOOP;
     /*
  
     How Can I load colNum from m_cCursor into retNA(TNUMBERARRAY)?
  
     I would like to use it later in statment like
     Select * from SOMETABLE ST, Table(retNA) NA
     WHERE ST.ID = NA.ID and ...
  
     */
  
     END retnumberarray;
  END pkg;
  /
  Package body created.
  
  SQL>  DECLARE
     x   pkg.tnumberarray;
  BEGIN
     pkg.retnumberarray (x);
  END;
  /
  1
  2
  3
  4
  5
  6
  7
  8
  9
  10
  11
  12
  13
  14
  15
  16
  17
  18
  19
  20
  PL/SQL procedure successfully completed.
  

  I would use it later in the statement as
  Select * from SOMETABLE ST, Table (retNA) NA
  WHERE ST.ID = NA.ID and...

  Beware that you cannot SELECT collections defined in PLSQL. You must set them in SQL ;)

• SelectionListener ADF table fault line did not

  Hi all

  I came across this well-known problem:

  SelectionListener not firing when only 1 result of searching in a table

  SelectionListener ADF table question

  Listener First Row af selection problem: table in ADF 11 g | _outwardBound

  Basically the selectionListener on the table of the ADF is not triggered for the selected standard line, or if the table has only one line, when you filter a column and the result returns only a single line or even when you turn off the filters and it shows you once again all the lines, marking the first such as selected.

  To summarize, the selectionListener is launched when the user clicks on a different line, but not from the default (even if the user clicks on it on purpose).

  I know that there are a few workarrounds, but who may not be suitable for the use of each case on these old threads.

  I think that, given that the line is selected (does'nt matter whether or not it is by default), the developers expect the listener to be pulled in all cases and that this behavior is a bug.

  My question is, given that this problem is still happening in jdev 12.1.3, if there are plans to fix this in future versions.

  Thank you.

  We cannot answer that. To get a response, you must file an SR with support.oracle.com and seek support for a date it a fix.

  Timo

• Search any text in the filter of the columns on the table of the adf

  Hello
  I have the filter on adf table columns where I can search any text beginning by default.
  For example you gave, my name is sam you can search filter for table of my column and you get the results, my name is sam
  but I want to search by any word we will tell sam and I want to show the same result.
  
  Thank you
  Savan Shah.

  You can probably use wildcards (% and _)
  for example % my %

  Dario

• The center of the ADF table column data

  I use JDeveloper 11.1.1.6
  
  I would like to be able to focus some of the attributes stored for some columns in my table of the ADF. Here are 2 of the columns in my table ADF I tried to center data. For some reason, the data remain justified left. In my skin file I am centering the header values for all columns in all tables. I don't want to do that, but with the row data. For row data, I want to selectively choose the columns that are left centered or justified. Do you have any ideas on what I'm missing.
  
  
  
  < af:table value = "#{bindings." Data1.collectionModel}.
  var = "row".
  lines = ' #{bindings. " Data1.rangeSize}.
  emptyText = "#{bindings." Data1.viewable? "{'No data to display.': 'Access Denied.'}".
  fetchSize = "#{bindings." Data1.rangeSize}.
  rowBandingInterval = '1 '.
  Binding = "#{backingBeanScope.backing_ui_pages_DataDispatch_Processing_update." Table"}
  ID = "myTable" columnStretching = "last".
  rowSelection = "single" displayRow = "selected".
  selectedRowKeys = ' #{bindings. " Data1.collectionModel.selectedRow}.
  selectionListener = "#{bindings." Data1.collectionModel.makeCurrent} ">"
  
  
  ...........
  
  
  < af:column sortProperty = "MyId" sortable = "false".
  headerText = "#{bindings." Data1.hints.MyID.label}.
  ID = "c1" >
  < af:outputText value = "#{rank." MyId}"id ="ot10.
  inlineStyle = "" text-align: center; "/ >"
  < / af:column >
  < af:column headerText = "#{bindings." Data1.hints.size.label}.
  ID = 'c4' width = "75" >
  < af:selectOneChoice value = "#{row.bindings.Size.inputValue} '"
  label = "#{row." Bindings.Size.label}.
  required = "#{bindings." Data1.hints.size.mandatory}.
  shortDesc = "#{bindings." Data1.hints.size.ToolTip}.
  ID = "soc3" readOnly = 'true '.
  inlineStyle = "" text-align: center; ">"
  < f: selectItems value = "#{row.bindings.Size.items} '"
  ID = "si3" / >
  < / af:selectOneChoice >
  < / af:column >
  
  
  ...........
  
  
  < / af:table >

  I'm sorry. The attribute align = 'center' is at the level of the spine.

  Try this:

  Try this:

  
  var = "row".
  lines = ' #{bindings. " Data1.rangeSize}.
  emptyText = "#{bindings." Data1.viewable? "{'No data to display.': 'Access Denied.'}".
  fetchSize = "#{bindings." Data1.rangeSize}.
  rowBandingInterval = '1 '.
  Binding = "#{backingBeanScope.backing_ui_pages_DataDispatch_Processing_update." Table"}
  ID = "myTable" columnStretching = "last".
  rowSelection = "single" displayRow = "selected".
  selectedRowKeys = ' #{bindings. " Data1.collectionModel.selectedRow}.
  selectionListener = "#{bindings." Data1.collectionModel.makeCurrent}">

  ...........

  
  headerText = "#{bindings." Data1.hints.MyID.label}.
  ID = "c1" align = "center" >
  
  
  
  ID = 'c4' width = "75" align = "center" >
  
  label = "#{row." Bindings.Size.label}.
  required = "#{bindings." Data1.hints.size.mandatory}.
  shortDesc = "#{bindings." Data1.hints.size.ToolTip}.
  ID = "soc3" readOnly = 'true '.
  >
  
  ID = "si3" / >
  
  

  ...........

  Thank you
  Nini

• ADF Table Filter Date columns

  Hello

  JDev 11.1.2.4

  In my EO, I have a defined attribute as Type = "oracle.jbo.domain.Timestamp" and in the database is defined as NOT NULL DATE. " I view this EO from VO and add filters. The attribute date, we decided to change the inputText instead of date filter. MinValue, because the customer does not want the little calendar.

  < f: facet = name 'filter' >

  < af:inputText value = "#{vs.filterCriteria.DtRgtBegin}" id = "id1" label = "Label 2" > "

  < af:convertDateTime pattern = "#{bindings." RgtCftDetail1.hints.DtRgtBegin.format}.

  secondaryPattern="#{pageFlowScope.conflitcDetail.secondaryDatePattern}"/ >

  < / af:inputText >

  < / f: facet >

  When the user enters 01/01/2000, newspapers will appear:

  < OracleSQLBuilderImpl > < bindParamValue > [9789] link 'vc_temp_1' param: 2000-01-01 00:00:00.0

  but returns no results while there are corresponding lines with the date 2001-01-01

  I think it is that the comparison is made on the date and time then I care just the date.

  Thank you

  Why did you use timestamp data type? A timestamp was a part of the time. Use the date in the area of occurrence and it should work.

  Timo

• The ADF Table data validation and highlighting

  I have an ADF table, supported by a VO. Gets the data loaded from a spreadsheet file. There are some required columns marked with the required attribute. the columns do not get highlighted when loaded data are empty. How can I get auto table validated during the loading of data and WITHOUT a commit / submit to the rear end table?

  My requirement is.

  1 load the data into the table.

  2. a way to highlight the rows or columns that have no values (how?) I tried the style inline for column as #{row.bindings.invamt == null?' background-color: Red;': ' background-color: White;'}, but no luck.

  3. validate data from db.

  User, tell us your version of jdev, please!

  If the table is editable, you can add this to the inputText of the column

  contentStyle = ' #{empty row.bindings.PhoneNumber.inputValue?» "{- color: red;':"} ".

  For the PhoneNumber column. If the table is read only the cellular connection is

  973564 wrote:

  I have an ADF table, supported by a VO. Gets the data loaded from a spreadsheet file. There are some required columns marked with the required attribute. the columns do not get highlighted when loaded data are empty. How can I get auto table validated during the loading of data and WITHOUT a commit / submit to the rear end table?

  My requirement is.

  1 load the data into the table.

  2. a way to highlight the rows or columns that have no values (how?) I tried the style inline for column as #{row.bindings.invamt == null?' background-color: Red;': ' background-color: White;'}, but no luck.

  3. validate data from db.

  contentStyle = ' #{blank line.» Phone number? "{- color: red;':"} ".

  So I guess that the connection you are using is not correct.

  

  Timo

• How do I remove the filter from column of table without QueryEvent

  Hi all

  With the help of JDev 12.1.3.

  I have a table that contains a list of customers and suppliers like so.  Auto Repair Bob is a client.  Chips R Us is a seller.

  Name                | TypeKey (foreign key to the Table of Type) | Unique ID

  Auto repair Bob C 1

  Quickie Mart C 2

  R chips us V 3

  Let's say that I filter on 'V' through the user interface by selecting a choice selection of the column in the table.  Now only chips R Us opens.

  Name                | MasterTypeKey | Unique ID

  R chips us V 3

  Now, let's say that I want to remove my filter I can do another business process programmatically.  How to do that without requiring a QueryEvent and so to refresh a page?  I have been searching the various view classes of being variable Manager and have located the variable I need to remove it, but I'm not sure how to let him go.

          // get the query in it's current state
          String lQuery = bpIterator.getViewObject().getQuery();
          //get Valriables
          VariableValueManager lEnsureVariableManager = bpIterator.getViewObject().ensureVariableManager();
          Variable[] lVariables = lEnsureVariableManager.getVariables();
          int lCount = lEnsureVariableManager.getVariableCount();
          // Dump query
          System.out.println("---query--- " + lQuery);
          // if variables found dump them
          if (lCount > 0){
              System.out.println("---Variables:");
              for (int ii = 0; ii < lCount; ii++){
                  Object lObject = lEnsureVariableManager.getVariableValue(lVariables[ii]);
                  System.out.println("  --- Name: " + lVariables[ii].getName() + " Value: " +
                                     (lObject != null ?  lObject.toString() : "null"));
              }
          }  
  

  Makes me

  ---query--- SELECT BusinessPartners.COMPANY_ACCOUNT_ID,       BusinessPartners.MASTER_TYPE_KEY,         BusinessPartners.NAME,         BusinessPartners.BUSINESS_PARTNER_REF_KEY,      FROM BUSINESS_PARTNERS BusinessPartners WHERE ( ( ( (UPPER(BusinessPartners.MASTER_TYPE_KEY) = UPPER(:vc_temp_1) ) ) ) ) AND BusinessPartners.COMPANY_ACCOUNT_ID = :Bind_CompanyAccountId ORDER BY BusinessPartners.NAME
  ---Variables:
    --- Name: vc_temp_1 Value: C
    --- Name: pCompanyAccountId Value: null
  

  I am trying to get vc_temp_1 is deleted or to accept any value, but when I write what follows I get an error message "missing parameter IN or OUT."

  lEnsureVariableManager.removeVariable("vc_temp_1");
  

  Any ideas on how I can remove the filter on my view object?

  It cannot work without running the query again. As you see that the filter is running a query make the vo is not all data.even if you delete the variable filter, that you do not get the data from the database you need to show.

  You can reset the filter (see https://tompeez.wordpress.com/2013/08/06/jdev-12c-how-to-reset-a-filter-on-an-aftable-the-12c-way/) but you must run the query again to the corresponding data.

  Timo

• Some columns of the values of the selected line returns NULL in the table of the adf.

  Hello..
  
  My version of jdev 11.1.1.5.0
  
  I have a vision with some columns. This view is mapped to a table of adf with some of the displayed columns. My task is to get the column values selected line (including the values of the column not displayed).
  But I'm certain values such as null, although there are values present when I run the query from the view.
  My code:
  DCIteratorBinding tableVO = ADFUtils.findIterator ("myVO");
  ViewObject voTableData = tableVO.getViewObject ();
  Line rowSelected = voTableData.getCurrentRow ();
  
  
  + / / codeto display column and the values +.
  int x = 0;
  * for (the names of the objects: rowSelected.getAttributeNames ()) {*}
  
  * for (int i = x; i < rowSelected.getAttributeValues () .length; i ++) {*}
  * System.out.println (x + "." + name + "=" + rowSelected.getAttribute (i)); *
  break;
  *}*
  x ++ ;
  continue;
  *}*
  
  
  MY table:
  * < af:table value = "#{bindings.myVO.collectionModel}" *.
  * var = "row" rows = "#{bindings.myVO.rangeSize}" *.
  * EmptyText = "#{Bindings.myVO.Viewable?" "{'No data to display.': 'Access Denied.'}". *
  * fetchSize = "#{Bindings.myVO.rangeSize}" *.
  * rowBandingInterval = "0."
  * filterModel = "#{Bindings.myVO.queryDescriptor}" *.
  * queryListener = "#{Bindings.myVO.processQuery}" *.
  * filterVisible = "true" varStatus = "vs."
  * selectionListener = "#{myBean.method_onRowSelect}" *.
  * rowSelection = "single" id = "t1" styleClass = "AFStretchWidth."
  "* partialTriggers =": sbcClose: sbcOpen: socWarehouse. "
  * inlineStyle = "height: 217px;" / > *.
  
  
  Thank you

  Question: the attributes are not null in the DB?
  The attributes are part of the past of the query select?
  And they are part of the binding of the tree?

  Timo

• ADF: Columns of the Table filtering problem

  Hello
  
  My Version of JDeveloper is 11.1.1.5
  
  I am facing a problem with the filter of the table...
  
  Is it possible to implement the feature of research on filtering only on af:table with panelCollection?
  
  Could someone help me please in this?
  
  I need Research* not only the filtering of the data inside the table with the facet of the columns of the table filter...
  
  Can someone help me with this application?
  
  Many thanks in advance,
  
  Kind regards
  Anil
  
  Published by: 977652 on February 17, 2013 19:28
  
  Published by: 977652 on February 17, 2013 19:38

  You can just type in the filter like '% EBS' field and you will find your file.

  Timo

• Columns of the nested Table and ADF BC 11.1.2

  I think coming to a new conception of the application, including a redesign of the database. In this application, there are users who cannot change tables of production directly, but their amendments must be approved (and possibly modified) before applying them to production tables. The production tables are part of an existing system and are fairly well standardized, with a main table and several paintings of detail.
  
  So for the new design, I want to have a table intermediate, mirrored in the main table, where the user's changes are stored until they are approved and applied to the production tables. The intermediate table contains some additional columns for the user "add, change or delete", who supported the change, the date modified is requested. After you apply the change, the intermediate folder must be copied in a historic change and deleted from the staging table. In this way, the intermediate table is never a lot of data in it.
  
  Here's the question:
  I need to treat the tables in detail. I could have staged versions of each table in detail, but I thought it might be easier to manage if detail tables have been included in table nested table columns main staging area. Most of the detail tables contain only a few rows with rank of master. But ADF BC 11.1.2 can treat the nested table columns? Is it easy to use in an application?

  Hello

  and ADF Faces does support nested tables? lol so even if ADF BC would be, where would you go with this approach? Polymorphic views would be an option (think hard)?

  Frank

• Jdev 11 g, adf table to obtain the current data line

  Hello
  
  I'm sure it's an easy thing, but I was look a little for example clear and not can't find a.
  
  I did slip and fall a table ADF of my data on my jspx page control. I just need to know what I need to change in the table (that is to say, I think I need to add an id?), then what I have in my bean managed to get the values of the current row of data.
  
  Thank you
  
  Including a version modified the table on page

  <af:table value="#{bindings.AsItmRtlStr.collectionModel}"
                          var="row" rows="#{bindings.AsItmRtlStr.rangeSize}"
                          emptyText="#{bindings.AsItmRtlStr.viewable ? 'No rows found.' : 'Access Denied.'}"
                          fetchSize="#{bindings.AsItmRtlStr.rangeSize}"
                          inlineStyle="height:70px; width:600px;" id="current">
                  <af:column sortProperty="idItm" sortable="false"
                             headerText="Item">
                    <af:outputText value="#{row.idItm}"/>
                  </af:column>
                  <af:column sortProperty="idStrRt" sortable="false"
                             headerText="Store">
                    <af:outputText value="#{row.idStrRt}"/>
                  </af:column>
                  <af:column sortProperty="rpSlsCrt" sortable="false"
                             headerText="Retail Price">
                    <af:outputText value="#{row.rpSlsCrt}"/>
                  </af:column>
                </af:table> 

  in my example, the values are not directly retrieved from component of af: table but the underlying model!

  for example, instead of DCControlBinding cb = (DCControlBinding) this.bindings.get("*futurePriceTable*"); should be
  DCControlBinding cb = (DCControlBinding) this.bindings.get("*RkPriceChange*"); or in your case should also be DCControlBinding cb = (DCControlBinding) getBindings ().get("*RkPriceChange*");

  and

  instead of the id of the string = (String) currentRow.getAttribute("#{row.priceChangeId}"); You should have the id of the string = (String) currentRow.getAttribute ("" ** "");

  Kind regards

  Branislav

• table col name get the details of the table column and inserting of values depending on the data type of the column

  Hello

  I am train to write a procedure where I would spend the table as a parameter name and then the code would determine it is column names, and then he would insert records in each column depending on the data type. could someone help me with this.

  Thank you

  SM

  Hello

  Perhaps you need to dummy data just for the table.

  Here is my exercise

  create or replace
  procedure generate_rows(p_table_name varchar2, p_count number)
  is
    --
    function insert_statement(p_table_name varchar2) return clob
    is
      l_columns clob;
      l_expressions clob;
      l_sql clob default
        'insert into p_table_name (l_columns) select l_expressions from dual connect by level <= :p_count';
    begin
      select
        -- l_columns
        listagg(lower(column_name), ',') within group (order by column_id),
        -- l_expressions
        listagg(
          case
          when data_type = 'DATE'
            then  'sysdate'
          when data_type like 'TIMESTAMP%'
            then  'systimestamp'
          when data_type = 'NUMBER'
            then  replace('dbms_random.value(1,max)',
                    'max', nvl(data_precision - data_scale, data_length)
                  )
          when data_type = 'VARCHAR2'
            then  replace(q'|dbms_random.string('a',data_length)|',
                    'data_length', data_length
                  )
          else
                  'NULL'
          end, ',') within group (order by column_id)
      into
        l_columns,
        l_expressions
      from user_tab_columns
      where table_name = upper(p_table_name);
      --
      l_sql := replace(replace(replace(l_sql,
        'p_table_name', p_table_name),
        'l_columns', l_columns),
        'l_expressions', l_expressions);
      -- debug
      dbms_output.put_line(l_sql);
      --
      return l_sql;
    end;
  begin
    execute immediate insert_statement(p_table_name) using p_count;
  end;
  /
  
  -- test
  create table mytable(
    id number(4,0),
    txt varchar2(10),
    tstz timestamp with time zone,
    dt date,
    xml clob
  )
  ;
  set serveroutput on
  exec generate_rows('mytable', 10);
  select id, txt from mytable
  ;
  drop procedure generate_rows
  ;
  drop table mytable purge
  ;
  
  Procedure GENERATE_ROWS compiled
  Table MYTABLE created.
  PL/SQL procedure successfully completed.
  
  insert into mytable (id,txt,tstz,dt,xml) select dbms_random.value(1,4),dbms_random.string('a',10),systimestamp,sysdate,NULL from dual connect by level <= :p_count
          ID TXT
  ---------- ----------
           3 WnSbyiZRkC
           2 UddzkhktLf
           1 zwfWigHxUp
           2 VlUMPHHotN
           3 adGCKDeokj
           3 CKAHGfuHAY
           2 pqsHrVeHwF
           3 FypZMVshxs
           3 WtbsJPHMDC
           3 TlxYoKbuWp
  
  10 rows selected
  
  Procedure GENERATE_ROWS dropped.
  Table MYTABLE dropped.
  

  and here is the vision of Tom Kyte for the same https://asktom.oracle.com/pls/asktom/f?p=100:11:0:P11_QUESTION_ID:2151576678914

  Edit: to improve my code, it must use p_count as bind as Tom.