Adfc-controller-config element should not

Similar Questions

• Could not send data to configuration ldap to libOvd for the instance of service 'idstore.ldap' - 'socketOptions' element should not

  Hello

  I have an installed WebLogic 10.3.6 with ADR 11.1.1.6 cluster.

  Everything worked fine until recently when I installed Web Tier 11.1.1.7 and associated with the instance of OSH with my WebLogic AdminServer EM.

  Now I can't start my managed servers, receive the below error message.  I tried to add "-Djava.security.debug = jpspolicy" to JAVA_OPTIONS strings in startManagedWeblogic.sh, but they do not get more information.

  JAVA_OPTIONS = "-Djava.security.debug=jpspolicy-Dweblogic.security.SSL.trustedCAKeyStore="/u01/app/oracle/Middleware/wlser\

  "Ver_10.3/Server/lib/cacerts" ${JAVA_OPTIONS} "

  Any advice would be appreciated.

  # < 26 June 2013 16:22:23 UTC > < critical > < WebLogicServer > < gds-dev-mt-1 > < ManagedServer_1 > < main Thread > < < WLS Kernel > > <><>< 1372263743069 > < BEA-000386 > < server subsystem failed. Reason: weblogic.security.SecurityInitializationException: loading of the OPSS java security policy provider failed due to the exception, see exception stack trace or the log file of the server root. If still don't see no obvious cause, turn on debugging of the flag - Djava.security.debug = jpspolicy for more information. Error message: JPS-02592: could not send ldap configuration data to libOvd for the instance of service 'idstore.ldap' in the context of JPS 'default', cause: oracle.xml.parser.v2.XMLParseException: element 'socketOptions' not expected not.

  weblogic.security.SecurityInitializationException: loading of the OPSS java security policy provider failed because of the exception, see exception stack trace or the root server log file. If still don't see no obvious cause, turn on debugging of the flag - Djava.security.debug = jpspolicy for more information. Error message: JPS-02592: could not send ldap configuration data to libOvd for the instance of service 'idstore.ldap' in the context of JPS 'default', cause: oracle.xml.parser.v2.XMLParseException: element 'socketOptions' not expected not.

  at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1402)

  at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1022)

  at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)

  at weblogic.security.SecurityService.start(SecurityService.java:141)

  at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)

  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)

  at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

  Caused by: oracle.security.jps.JpsRuntimeException: JPS-02592: could not send ldap configuration data to libOvd for the instance of service 'idstore.ldap' in the context of JPS 'default', cause: oracle.xml.parser.v2.XMLParseException: element 'socketOptions' not expected not.

  to oracle.security.jps.internal.policystore.PolicyDelegationController. < init > (PolicyDelegationController.java:167)

  to oracle.security.jps.internal.policystore.JavaPolicyProvider. < init > (JavaPolicyProvider.java:369)

  at sun.reflect.NativeConstructorAccessorImpl.newInstance0 (Native Method)

  at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)

  at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)

  at java.lang.reflect.Constructor.newInstance(Constructor.java:513)

  at java.lang.Class.newInstance0(Class.java:357)

  at java.lang.Class.newInstance(Class.java:310)

  at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1343)

  at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1024)

  at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:879)

  at weblogic.security.SecurityService.start(SecurityService.java:142)

  at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)

  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)

  at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

  Layer Web 11.1.1.6 does not exhibit this problem.  Sex Web 11.1.1.7 patched the oracle_common and I feel is not compatible with ADR 11.1.1.6 or 11.1.1.7

• CS6: Unique black frame between two elements should not be here...

  Hello

  I hope that someone will be able to answer this question.

  I have two clips in my calendar that I broke together, on the timeline there seems to be a gap and still when I advance frame by frame a single black frame appears.

  I tried to cut a frame outside each of the clips but the black frame always appears.

  Here are a few screenshots to clarify (I'm completely on the timeline zoom).

  It is the last image before the split

  This is where the two clips join

  It is the first image after the split

  I would appreciate any help/advice anyone can offer!

  P.s. I'm under first CS6 on Mac OSX 10.8.3 (Mountain Lion)

  Thank you!

  A recent discussion with a similar problem:

  Stabilizing warp CS6 scales down to the last image

  http://forums.Adobe.com/message/5170132

• Message received when openning the Adobe Premiere elements 12 'not possible to initialize the services online' what should I do?

  Hello

  How can I solve this problem?

  Message received when openning the Adobe Premiere elements 12 'not possible to initialize the services online' what should I do?

  Thanks in advence

  FL

  FLOureiro

  What operating system is running your 12 items first? Have you updated to 12 to 12.1 update using Help Menu/implementation of an open project? If this isn't the case, please do.

  For your immediate problem, did you update Online Services in the preferences?

  Where are you in the program when you get the message "failed to initialize the services online.

  You are in a country outside of the USA?

  There are some online services that are simply not available outside the United States.

  Please check and review and then, based on your details, we will consider what then.

  Thank you.

  RTA

• My adobe 9 photoshop elements do not work with windows 10. What should I do?

  My adobe photoshop elements do not work with windows 10. What I have to do, that it works?

  You can use compatibility mode to install.

• EqualLogic group member network configuration error: "management interface should not be on the san subnet.

  Hello

  We currently have new EqualLogic 6100 device with this network configuration:

  Director of the IP - 192.168.0.2 (VLAN1).

  Member network config:
  eth0 - 192.168.0.3 (VLAN1)
  eth1 - 10.10.10.3 (VLAN2)
  eth2 - 10.10.10.4 (VLAN2)
  eth3 - 10.10.10.5 (VLAN2)
  ETH4 - empty

  I would attribute 192.168.0.4 to eth4, but received the error: "management interface should not be on the san subnet.

  I am sure that all interfaces eth has access to the VLAN1 and VLAN2, mean error indicates that eth4 should not access VLAN2 and only access the VLAN1 on the switch?

  Or eth0 should also have access to the VLAN2 only to reconfigure eth0 and eth4?

  Thank you

  > The group eating IP should be in iscsi VLANS?

  Yes!

  Note: If configure you an EQL it will ask an iSCSI port because nothing is more necessary to bring it up. The doest previous EQLs have a dedicated Mgmt Port and later, you can convert the last ethX as a MGMT port. This is the reason why configure you ISCSI at the beginning. (Think of a mixed group of newer and older models, and you get a picture)

  OK... once again it is the one and only member of the Group and there is making the production host connected to the right?

  The change of IP address, to a 3rd. subnet for temporary use.

  -Do not touch eth0-3 and the IP address of the group now

  -Configure the MGMT port and IP address management in the tempr group. Subnet. Use the Config-> Adv. Group-> network MGMT. You can change the MGMT Port of the Member, and the address IP of MGMT

  -For the registration of the configuration, you will lose access. You must place your admin PC in the templ. subnet so

  -Connect to the GroupMgr with temp again. INTELLECTUAL PROPERTY

  -Now you can change the IP address of group 10.10.10..x

  -Now you can change eth0 10.10.10.2

  -At the end, you can change the address IP of the Group MANAGEMENT, as well as the MGMT Port to 192.168.0.x

  -Change the IP address of your admin PC rear

  A failover, you should consider to hang a serial cable the active controller of the EQL. Use 9600,8,1, N with your favorite terminal program (putty.exe on windows). All the steps, you can perform from the command line.

  If this group and the only member not in production, but you can reset the config and restart from the beginning.

  Kind regards

  Joerg

• For automatic indexing loop should not index empty array

  Hi guys,.

  I wanted to say in this VI remove empty elements in the table. He worked for table 1 d, but as soon as I gave him a table 2D, for some reason that I was unable to remove empty elements:

  

  

  sdfsdfsdfadgadf wrote:

  So when I was debugging, I saw at the 3rd row and 4th iteration of line, out of the inside OF the terminal loop index outter loop is [].

  Should not the terminal of the index of the outer loop treat [] as 'skip it '?

  In this case, the tunnel of indexation in the outer loop takes an empty 1-d array and adds it as a line to the 2D table. Because the 2D tables can not be serrated, it fills the remaining elements of the line (all) with the default value. Maybe we could say that an empty array should mean 'add all', but this behavior goes back very far and I don't know what effect this would have. As mentioned, it is easy enough to do what you want with a conditional append in the outer loop.

  sdfsdfsdfadgadf wrote:

  I mean what you described certainly applies if [] a something, but in this case it didn't. To prove the point, try something like this:

  

  Check the size of the table. You will find that it is 3,0,0. In other words, you have 3 pages, each with an empty 2D array, which is exactly what builds your code.

  I try to avoid dealing with > 2D paintings and which deals with the cases where they can be empty, so I don't remember the details of why this happens, but IIRC, it follows the rules of the system.

• The properties of this element are not available.

  I have Windows 7 32 bit. This problem just showed about a week ago. I've been running Win7 for a month and a half. When start the computer and the computer finishes booting, the Office has a small error window open with a message in the box indicating: the properties of this element do not exist. I don't know where to begin finding the problem. In the upper left corner of the box, it said office. I tried to start in safe mode and the error message is not there. I text of the my way and I have a picture of the box captured with the cutting tool. I can't get any information on the box on the right or left by clicking on it. What should I try to stop this box to appear next? If I click ok, the box goes away and I can say that everything is fine. Also, I did a sfc/scannow and the report has all the files are responsible for.

  The answer to my question came from a classmate at PCsoft or freepctech.com. M. Vandervoort suggests that the problem was in my Admin tools or my startup folder. There is a link in my startup folder. Solved error message. Mahalo.

• Every time I make an external edition with 12 LR6 elements it tells me I need Camera Raw 9, but the elements will not update to Camera Raw 8.5. How to stop this message pop up?

  Can I stop this pop up does not happen? Or is there a work-around that will get Camera Raw 9 install on 12 items?

  spinner498 wrote:

  Here, I'm a bit confused. The message, in LR long before the opening of the elements. I don't see this as a question of items other than the items will not be upgraded past 8.5. It's a LR definition probably

  It is actually both a Lightroom and Photoshop Elements problem. The version of Lightroom you are using search Camera Raw 9 to make sure that the image is properly translated when it transfers from Lightroom to Photoshop Elements. Lightroom can see that you have only the version of camera raw. Lightroom notifies you as well as the transition between Lightroom and elements might not transfer all adjustments using Lightroom. So, it should give a free choice either way you or edit a copy with Lightroom adjustments. The second option is the one you should choose. Then Lightroom will create a TIF or PSD file (depending on your external editing options) and send this file to the elements. The only way you can completely solve this problem is to have a version of Photoshop Elements, which is fairly new to use the same version of camera raw that Lightroom is looking for. If you don't want to upgrade your version of elements, then you should choose the option to edit a copy with Lightroom adjustments.

  Camera Raw is used when you transfer the file from Lightroom to elements to translate the raw settings and create an image that can be edited in the elements. By itself without camera raw, Photoshop Elements cannot change raw images. The image must be converted before its opening in Photoshop Elements.

• Serial number Photoshop Elements is not valid, but I got it directly on the site

  I said that my serial number Photoshop Elements is not valid, but I got it directly on the site. What should I do?

  Make sure that your version of the installer is identical to the version of the license.

  Here are the other traps, http://helpx.adobe.com/creative-suite/kb/error-serial-number-valid-product.html

• 3-d element does not display the textures of the models

  I use after effects cs6. I use the 3d element to create a 3d intro. but the 3d element is not displayed the textures. for example the Exchequer in the starter pack does not display textures. and also when I open aired it to add textures texture channel is not poster texture.

  I found the solution I should just change my graphics driver for more later

• UNION keyword should not

  I'm trying to get the following union query on my coldfusion site:

  < name cfquery = "committee_record."

  DataSource = "AS400a CMTLIB".

  MaxRows = 100

  DbType = "ODBC" >

  SELECT MBRESMPF. MBMID,

  MBRESMPF. MBCYR,

  MBRESMPF. MBCCD,

  MBRESMPF. MBDCD,

  UCase (COMITEPF. CMNAM) AS COM,.

  MBRESMPF. MBMRC,

  UCase (RANKSPF. RKDSC) AS rank.

  MBRESMPF. MBRPT,

  MBRESMPF. SPORT,

  MBRESMPF. MBERP,

  UCase (DIVISNPF. DVNAM) LIKE DIV

  FROM MBRESMPF INNER JOIN RANKSPF ON MBRESMPF. MBMRC = RANKSPF. RKCDE LEFT JOIN COMITEPF ON MBRESMPF. MBCYR = COMITEPF. CMCYR AND MBRESMPF. MBCCD = COMITEPF. CMCCD AND MBRESMPF. MBDCD = COMITEPF. CMDCD LEFT JOIN DIVISNPF ON MBRESMPF. MBDYR = DIVISNPF. DVDYR AND MBRESMPF. MBDCD = DIVISNPF. DVDCD

  WHERE MBRESMPF. MBMRC <>"ORCDVPRN4" AND MBRESMPF. MBMRC <>'ORCIPDRNS' AND MBMID = #id_number #.

  ORDER OF MBRESMPF. MBMID, MBRESMPF. MBCYR / / DESC

  UNION SELECT MBRESMPF. MBMID,

  MBRESMPF. MBCYR,

  MBRESMPF. MBDCD,

  MBRESMPF. MBDCD,

  UCase (DIVISNPF. DVNAM) AS COM,.

  MBRESMPF. MBMRC,

  UCase (RANKSPF. RKDSC) AS rank.

  MBRESMPF. MBRPT,

  MBRESMPF. SPORT,

  MBRESMPF. MBERP,

  UCase (DIVISNPF. DVNAM) LIKE DIV

  FROM MBRESMPF INNER JOIN RANKSPF ON MBRESMPF. MBMRC = RANKSPF. RKCDE LEFT JOIN DIVISNPF ON MBRESMPF. MBDYR = DIVISNPF. DVDYR AND MBRESMPF. MBDCD = DIVISNPF. DVDCD

  WHERE MBRESMPF. MBMRC = "ORCDVPRN4" OR MBRESMPF. MBMRC = 'ORCIPDRNS' AND MBMID = #id_number #.

  ORDER OF MBRESMPF. MBMID, MBRESMPF. MBCYR / / DESC

  < / cfquery >

  But I get the following error message:

  Error Diagnostic information

  Of ODBC error code = 37000 (syntax error or access violation)

  [IBM] [iSeries Access ODBC Driver] [DB2 UDB] SQL0199 - keyword UNION should not. Let's take valid: TO USE SKIP WAIT WITH FETCH OPTIMIZE.

  The error occurred while processing an element with a general identifier of (CFQUERY), occupying the position of document (19:1) (22:23).

  This query works for me no problem in Microsoft Access.  Someone at - it suggestions?

  Thank you!

  I'm surprised that it works in Access, but from my experience a UNION query generally expected a single ORDER BY the end (a recordset that is the result of the union is so orderly and not to each recordset that contributes to the union)?  I'm not able to test this right now, sorry.

  --

  Adam

• When inserted null value should not

  Hello:
  
  I installed my application on apex.oracle.com. I hope someone can help me with a problem. I'm having is with an agenda: P17_APPLICATION_KEY. When I click on my "submit" button, the insert statement is insert a null value into this field when it should not. When you select an organization, you will see the application key in the column of the report.
  
  The application number is 48367.
  The page number is 17.
  The username is TestUser.
  The password is test.
  
  Tables and data are also configured. If you need to look at the charts, the schema is HCB.
  
  Can someone take a look at my application and help me understand why the value of application_key which is in the report is not displayed in my table, HISA_AGREEMENTS_DOC?
  
  Thank you very much for the help.

  Hello

  I had a glance through your application, and even if you are referring to P17_application_key in your insert statement, if you look at your state of session on page 17, you will see that p17_application_key is infact null.

  In your code, the page element is set to the value of the database, but it is not really filled from anywhere.

  You can change the report "APPLICATION_KEY" of "Standard report column" column to "Display text (saved state)" and who then reference it in your insert instead of your page statement, article P17_application_key.

  -L' Roamer.

• Is there an app Golf GPS for the Apple Watch series 2 which is "native" to the watch, in other words, should NOT be tied to an iPhone on the golf course?

  Is there an app Golf GPS for the Apple Watch series 2 which is "native" to the watch, in other words, should NOT be tied to an iPhone on the golf course?

  Hello

  You can find this app of interest:

  • PING
    • https://iTunes.Apple.com/us/app/ping/id440740108?Mt=8
    • http://www.Ping.com/about/insideping.aspx?ID=21779

• I did purchase for items in pokemon game come on I want a refund because the elements do not work as they were announced because of problems in the game

  I did purchase for items in pokemon game come on I want a refund because the elements do not work as they were announced because of problems in the game.

  Help, please

  You can go to http://reportaproblem.apple.com and report problems with the App and its purchases, as well as a refund.