Re: Failed to start with Satellite L300

Similar Questions

• Recovery with Satellite L300 problem

  I have a problem trying to restore my laptop Toshiba Satellite L300 to factory settings back!

  OK so basically, my laptop Toshiba Satellite screwed up and I even turn the thing!
  After a while, I was able to 'Restore factory settings' and then after typing my name and my Pc name etc., and after the latter had analyzed what it scans, it says "step 2: finish Prcoess Installation may take several minutes.» Do not interrupt or stop ' or or whatever it says...

  Anyway, I don't know, but it seems to be stuck on this screen! I left it for like 30/40 minutes and it always did, so I turned it off by the button. Now when I turn it on, I can't do anything until there finishes this installation, but when I try to leave it, it doesn't do anything!

  Help, please!

  Additional details
  I don't have a recovery disc! I restore or retrieve or another of the original on the HARD drive when you press F8 at startup to the top

  Any help appreciated

  Thank you, Andy

  Post edited by: ADMIN

  Hello Andy

  Unfortunately there is not some sort of magic bullet. A recovery facility works or not and there is no way to make it work somehow.

  What you can do is to start the installation of recovery even once, if possible. Please do so and send feedback.

  To be honest I don t understand why you didn't create Toshiba Recovery DVD s advice. If something goes wrong with the HARD drive or HARD drive recovery image can not be used you will be able to use recovery DVD for installing the OS.

• Start secure Satellite L300 problem

  Hi all

  Satellite L300 daughter boot... yet.
  When I try f8, it will beep.
  A cursor appears in the upper left corner of the black screen.
  I can't enter in the configuration advanced with f2 and f12, but I don't know what to do when I'm there.

  The OS is windows 7 and Linux is an option.
  The last time this happened, she has managed to get into Linux to save his work University before she used the recovery CD.
  I have it it to use it only for work etc etc, but she didn't listen...

  Any advice for a fool, please before I go and live somewhere else?

  Thank you

  JWW

  Is the HARD drive recognised properly in BIOS (F2) settings?
  The value of the default BIOS and try again.

  When you start Notepad, enter using F12 BOOT menu and select HARD drive as a boot device, what happens exactly?
  No HDD LED is flashing or not? Is there a any reaction?

• Start of Satellite L300-1 has 3 takes a lot of time

  Dear Sirs

  I bought a laptop from 1 to 3 Satellite L300 there is little time and I noticed that it is too slow at startup. It takes sometimes more than any portable computer so that it starts.

  This model is like that, or it can be changed or may be downgraded to Windows XP?

  Hello!

  Here in the forum are already discussions on this problem so that you can search a little.

  There are many ways to make Windows and departure faster upward. For example of auto-start all the, you need to disable programs that you don t need, disable services, defragment your drive HARD and far.

  Of course, you can install Windows XP on your laptop. Pilots and others, that you will find on the download from Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good bye

• What battery pack comes with Satellite L300 - 17 M?

  Good evening.

  I plan to buy the * Toshiba Satellite L300 - 17 M *.
  Model number: * PSLB0E-06R011G3 *.
  Product page link: [http://eu.computers.toshiba-europe.com/innovation/product/Satellite-L300-17M/1055471]
  Link to the user manual of the product: [http://support1.toshiba-tro.de/tedd-files2/0/userman-en-20080417102004.zip]

  That is, that I could not find any information indicating what battery is supplied in the box with this model,
  i.e. 3 cells / 4-cell / 6-cell and its associated specifications.

  I * + a + * however, able to find what battery packs that are compatible with this model are available as a separate purchase option.

  Any help on this would be greatly appreciated.

  Best regards

  Samuel.

  Hello

  According to the specifications of the laptop on several pages, I found that this laptop comes with a battery 6 cells. I'm sure you can also clarify this with your local dealer too.
  I hope he will confirm my information.

• I can't start with Satellite P10 by pressing the power button more

  I can't start my Satellite P10 by pressing the power button more.
  Sometimes, very rarely its starts when I hold the power button for a while say 10 seconds.

  I tested the power supply and a battery to my friends P10 (of the same type) and both work very well.

  So it must be a problem with the key.
  No idea what to do?

  Thanks for any help

  The best.

  Tobias

  If it s a button or a power supply electronic problem, then you can't do anything.
  In this case assistance by the technicians of laptop would be necessary.

  But the next time that you should try this option if the laptop turns on not;
  Remove the battery and unplug the AC adapter from the laptop for about 30 min.

  After this short period of time to reconnect the two parts and check if the laptop could start.

  Good luck

• EBS fails to start with error afpoload

  Hello
  
  All on a sudden our EBS refuses to start with the following error message. We are on 12.0.6 version, and did not any changes recently. As it is an instance of production, we should be reviving a SR tomorrow when getting to work, but just thought of posting here - just in case some of you have been there earlier. Fast ideas will be highly appreciated.
  
  
  ORACLE APP-FND-01564 942 error in afpoload
  
  Cause: afpoload failed due to the ORA-00942: table or view does not exist.
  
  The SQL statement being executed at the time of the error was: select NODE_ID from FND_NODES where SERVER_ID =: asid and was executed from the file & ERRFILE.
  
  
  Concerning

  Hello

  Changes have been made recently?

  Select FND_NODES where SERVER_ID = NODE_ID: asid and was executed from the file & ERRFILE

  You will find FND_NODES table in the database?

  Have you tried running AutoConfig on the node in database/application layer and see if it helps.

  Please check the file application.log for more information about the error. If no error is detected in the newspapers and the above did not help, then please get the FRD file and post the complete error here.

  Thank you
  Hussein

• EM fails to start with NoClassDefFoundError: HTTPClient/ProtocolNotSuppExce

  New installation of Fusion Middleware 11 g on HP - UX 64-bit Itanium running VMWare on top. It is that the application of the EM fails to start, to starting AdminServer and when tried to start manually.
  
  Caused by: java.lang.NoClassDefFoundError: HTTPClient/ProtocolNotSuppException
  at oracle.sysman.eml.app.ContextInitializer.contextInitialized(ContextInitializer.java:1035)
  to weblogic.servlet.internal.EventsManager$ FireContextListenerAction.run (EventsManager.java:481)
  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
  ............
  
  Anyone has any advice on what could be the cause? What particular type of communication happens while EM start which might be unique to it?
  
  Additional details-
  
  Installs on existing Windows 11g works without problems.
  
  On the installation of the HP - UX system, it is the only symptom of problems so far. Can deploy and start the user applications, Console can start and stop the servers. No other symptoms or error messages identified yet.
  
  EM app remains the failure State.
  
  Have uninstalled/reinstalled several times, tried other instances of VMWare and without success. Same behavior each installation. Have wittled to rudimentary installation for MS, so little additional choices to muddy the waters.
  
  WebLogic generic installation pot take all default values
  AppDev install generic zip taking all default settings
  Run the config for the new domain, changing AdminServer to add EM, which includes the JRFs
  Run setNMProps.sh 1 time and then run startNodeManager.sh, which opens with no problem
  Run startWebLogic.sh
  
  
  Problem occurs on the first boot of the server admin and any attempt to launch the application of the EM.
  
  Tried uping the settings with settings such as 1536 for main memory and 512 for permgen. Changes which have occurred in the startup file. But does not change the problem or behavior.
  
  WebLogic Debug traces did not give me more clues. HTTP calls to get all the resources for EM appear before this failure without problems. The last one that appears is the resource get enemy consoleConfig.xml. On all types of tracks, there seems to be a wait several seconds between the last trace message and failure messages, as if he expected a response from something.
  
  [# < 11 March 2010 12:26:43 PM CST > < Debug > < Http > < uspls111 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < < > anonymous > > <>< 1268350003075 > < BEA-000000 > < ServletContext@1471358173[app:em module: / path em: / em spec-version: 2.5] getResourceAsStream() invoked for: /WEB-INF/config/consoleConfig.xml >
  [# < 11 March 2010 12:26:43 PM CST > < Debug > < Http > < uspls111 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < < > anonymous > > <>< 1268350003077 > < BEA-000000 > < ServletContext@1471358173[app:em module: / path em: / em spec-version: 2.5] getResourceAsSource() invoked for: /WEB-INF/config/consoleConfig.xml >
  # < 11 March 2010 12:26:47 PM CST > < WARNING > < HTTP > < uspls111 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1268350007978 > < BEA-101162 > < oracle.sysman.eml.app.ContextInitializer listener has not defined by user: java.lang.NoClassDefFoundError: HTTPClient/ProtocolNotSuppException.
  
  
  
  There was a thread OTN showing same error but with "Production" Mode and solved by enabling SSL on the administration server. This question is "Development Mode" but enabled SSL, without resolution. Noted that clearances HTTPS appear in newspapers after the EM localization for start-ups. Retried after start EM and still the same error.
  
  Published by: user8755985 on March 16, 2010 16:07

  Hello

  Include in DOMAIN_HOME/bin/setDomainEnv.sh after line 473:

  # ADDED MANUAL

  POST_CLASSPATH="${SOA_ORACLE_HOME}/Oui/jlib/lib/HTTP_Client.jar${CLASSPATHSEP}${POST_CLASSPATH}.
  export POST_CLASSPATH

  EX:

  export POST_CLASSPATH

  # ADDED MANUAL

  POST_CLASSPATH="${SOA_ORACLE_HOME}/Oui/jlib/lib/HTTP_Client.jar${CLASSPATHSEP}${POST_CLASSPATH}.
  export POST_CLASSPATH

  If ["${DATABASE_CLASSPATH}"! = ""]; then

  TKS

• Defender fails to start with error 0x800106ba after application Vist SP 1

  I used Vista service pack 1 and now advocate does not start with a code of error 0x800106BA. I tried to uninstall it, but has not found how do for anywhere. I also tried to reinstall but the system says it is the first part of Vista. Any ideas?

  I used Vista service pack 1 and now advocate does not start with a code of error 0x800106BA. I tried to uninstall it, but has not found how do for anywhere. I also tried to reinstall but the system says it is the first part of Vista. Any ideas?

  You have already discovered, your AV closed your Defender Windiows because your AV has his own Defender, and having 2 defenders on the same machine will create conflicts.

  List of the AVs that will stop Windows Defender are...

  Microsoft Security Essentials
  Norton
  MacAfee
  AVG

  Canoe uninstall you or reinstall Windows Defender. It is part of the operating system. He lives and dies with the system.

  You do not get 0x800106B error code if you try to open Windows Defender, which is disabled by your AV.
  So, question:
  What did you want to do what it will take to open Windows Defender?

  If you try to enter the startup programs, you can do without going through Windows Defender.

  Start < in="" the="" search="" box,="" type="" msconfig=""> Startup tab > here is the list of startup programs...

  To disable - uncheck the box.
  To activate the checkbox....

  WARNING: Make sure that you know for sure to turn it off. If you are not sure, ask first.

• Search service Windows fails to start with error-2147218174

  Windows search has stopped working for my Outlook emails and other areas of the system, I went into the service panel and tried to start the Windows Search Service.  He was able to start with the error 2147218174.

  My first question: what does this number mean?  This number gives a clue as to the cause?

  I tried SFC, but system files are ok.

  I ran the store search & index, but who could not fix, because the service does not start.

  A discussion for a similar sounding problem, Microsoft asked a user to set a may be corrupt user profile by copying to a new.  But this has not fixed the problem for this user, so I probably shouldn't waste time with this step.

  Windows system event log contains the following entry that could give an additional hint:

  DCOM got error '1053' attempt to start WSearch service with arguments "" to start the server: {9E175B6D-F52A-11D8-B9A5-505054503030}

  Around the time this problem started to happen I upgraded a data disc to a hard drive different and changed the drive letter of this data.  Could he have mistaken the search services with the existing database of index and somehow prevents the service to start?

  By chance I came across a possible solution.  I went to "Indexing" / Advanced Options / rebuild the Index and now the Windows Search Service shows that it is "started".

  I am surprised that I have not read this suggestion on the forums of Windows support in response to questions from the other user has the same problem.

  It will be interesting to see if it works in the long term...

• Failed to retrieve on Satellite L300-19F

  My laptop computer is unbootable, so I start to recover with the 2 DVD that I made myself when I bought the laptop.
  (I already used successfully the DVD to get a 2nd hand laptop)

  The drive is already formatted successfully, but the procedure stops when the following error appears "error creating file - data error . Copy of the Base of the recovery files failed! Prees any key to continue... ».
  Then everything in BACK stops: X:\windows\system32>_
  How can I proceed with what DOS commands?

  Please notify. Thanks in advance.

  At the start of the recovery procedure everything works automatically, and if there is no problem with the recovery image, DVD you ve created or HDD recovery procedure everything will work correctly.

  You can have no influence on it and you can't put a few DOS commands to continue the recovery procedure.
  Using recovery DVD on computer, so they are created?
  Have you changed anything on the laptop as the HARD drive upgrade?

• Failed to start on Satellite L350

  Without any problems before my laptop did not start today with the following screen message: -.

  "Unable to start Windows. A recent hardware or software change might be the cause. To solve the problem:

  # Insert your Windows installation disc, and then restart your computer.
  # Choose your language settings, and then click "next".
  # Click "Repair your computer."
  If you do not have the disk, contact your system administrator or computer manufacturer for assistance.

  File: \Boot\BCD

  Status: 0xc000000f

  Info: an error occurred trying to read the boot configuration data. »

  I don't think I got an installation with the computer disc, so should inquire as to whether it is something that can be downloaded or if there is anything which can be tried before returning the unit to the retailer

  Hello

  All new laptops Toshiba, including your Satellite L350, are delivered without Toshiba Recovery CD/DVDs and this media facilities should be created by the owner of the laptop with the help of 'Toshiba Recovery Disc Creator'. This is small application designed by Toshiba and already pre-installed on the laptop with the factory settings.

  This recovery image can not be downloaded.

  If you didn t create this disc of relocations and now cannot start your laptop properly.
  What you can try is to install the OS using Toshiba Recovery option.
  Step by step guide that you find under http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm

  Please install OS using this guideline. If everything works well, once again please create recovery DVDs. I recommend you to use DVD-R virgins.

• Problems starting with Satellite P300 - 19K

  I have a portable Satellite P300 - 19K 1 month.

  Several times since I got it when I booted my system and got the password to logon windows my screen became a series of coloured horizontal lines and the Hung system completely. The only solution was to close by holding power button for 5 seconds. Screen start then on reboot that I would get in the trunk, but that did not work. Then, I learned that if I use the F8 key just I hit the power button I can get into a lot of upgraders and I was able to recover using the restore system but every time I lose a few programs that I need to reinstall.

  What has now happened 4 times in a month and becomes boring. I downloaded the latest display driver for the display of my card ATI Mobility Radeon HD 3650, but when I went to install it I learned the version I have on board is the same and everything is beautiful.

  Someone had something similar or have a solution?

  Hello

  If this happens with own pre-installed Vista (factory settings), please contact the nearest service provider and ask for help.
  Please do not test with some additional drivers. It WILL work properly with the factory settings.
  Addresses and phone numbers for ASP you will find under http://eu.computers.toshiba-europe.com > support & downloads > find an ASP.

  Good luck!

• BITS fails to start with error 2147942414 (0x8007000E)

  Windows Update fails, because she needs the BITS service to download files. The BITS service would not, begin to have pointed out the error in the event log.

  I couldn't find this anywhere error code. I spent days looking for the solution when I finally just did this:

  > del C:\ProgramData\Microsoft\Network\Downloader\*

  And the service started. It worked! I write this to save others from wasting a lot of time.

  Hello

  Thanks for the post.

  Also, I would say to users who use XP with SP3, this file link is "c\Documents and Settings\All Users Data\Microsoft\Network\Downloader". After these files deleted or moved to another location, you can start the BITS service.

  Sincerely.

• The PXE using HP on ISO measure fails to start with GROUP

  I have successfully configured a PXE boot using the VMware ESXi 4.1 Update 1 ISO version.  There is a complicated configuration that must be done to make it work (essentially described here: http://www.jayakumar.org/esx/pxe-boot-vmware-esxi-4-1-and-manual-install/):

  -Create a folder in which copy the source files for the installation ISO.

  -Copy the file "imagedd.bz2" on a Linux machine.

  -mkdir Pei usr/lib/vmware/Installer /.

  -mv imagedd.bz2 usr/lib/vmware/installer/VMware-VMvisor-big-4.1.0-348481-x86_64.dd.bz2

  -tar cvzf image.tgz usr /.

  -Copy the file "image.tgz" in the location of the soure file.

  -Place a copy of the file "pxelinux.0" (from version 3.0 of syslinux) in the location of the source file

  -Create a folder called "pxelinux.cfg; Copy the isolinux.cfg file in the pxelinux.cfg file and rename it to 'default '; Edit the file 'default' by adding '-image.tgz ' to the line append.

  If I do the same exact process using ISO custom of HP, the PXE install fails with a GROUP shown here:

  

  Anyone know what could be the problem?  I tried the version from the download site of VMware as well as directly from HP.

  I just had the same GROUP while trying to start an image constructed from HP 4.1_U1_Apr_2011_ESXi_HD_USB_SDImgeInstlr_Z7550_00096.iso

  In my case the problem is proved to be bad tar format image.tgz

  Student vmkernel.log I found visorfstar: entrance to complain about wrong image file.

  When I tried to convert uncompressed image.tar vmtar vgz reported: invalid tar: 'ustar'

  so I 'reconditioned' image.tgz with the utility tar anchored in esxi console and it worked finally.