adjust. do not remain layers after the conversion to sRGB

Similar Questions

• Help! VM does not start successfully after the conversion of Server VMware ESXi 4.1

  Hi, I have install my first server ESXi, everything seems OK and stable. Had a few PtoV machines, but to start I thought I propose our only current VM from VMWare server on our ESXi server.

  The VMware host is Win2003/32 running VMware server 1.0.6 and the prompt is also Win2003/32. I shut down the VM, installed the stand-alone converter on the VMware host and let it do it's thing. Successfully completed and took 20 minutes.

  When I try to start the virtual machine of the ESXi server, it looks OK, but hangs on "Application Startup Scripts", possibly the login screen appears, but then I get messages from "Remote RPC server not available" when you try to open an RDP session. A local login hangs right on the application of personal settings.

  Network everything seems fine, can ping the VM, etc.

  May not work on why the virtual machine should start any differently? Any ideas, anyone please. I am new to ESXi and migrate the virtual computer, but have used VMware Server a lot in the past.

  All advice appreciated...!

  That's good news.

  Which explains, normally, you must do the VMTools upgrade, then the virtual machine hardware, so if the converter upgrades the equipment, the order is bad. Of course, it is recommended to upgrade the hardware to ver 7. So now that it works you can improve the tools and then the vHardware. It might be interesting, if you have enough resources on the ESXi host, make a clone to the virtual machine and the test on the clone in a State (disconnect vNIC) offline.

  Please allow Points if it is useful

• Solaris VM is not running on ESX4.0 after the conversion of VMware workstation 6.5

  I have created Solaris VM on VMware workstation 6.5, but now I want to run it on ESX 4.0. After the conversion of Solaris VM from VMware workstation in format by converter 4.0.This VMware ESX VM restarts again and again on the boot of power.

  VMware workstation is running on Intel (R) Xeon (R) CPU E5420 and ESX 4 running on the Unisys ES3220L system

  Help, please...

  How was the original virtual controller?

  If it's IDE, you will need to also change SCSI to IDE on ESX 4.0.

  André

• some omitted spaces after the conversion of x 5

  I recently converted my 5 x aid project to version 7. After the conversion, some, not all, display of words merged compiled help, but does appear like that in Design view or when previewing in the topic. Normally, it happens after a word that is bold, or a hyperlink. When I look at the html code, it seems to be formatted correctly, in the following example, only the words Option display in bold management:
  
  Design/Preview menu screen - management Option
  HTML - < span style = "' make-weight: bold;" > </span > management option menu "
  Compiled help - Option Managementmenu
  
  The only way to add space is to insert a space before the/span tag. Of course, in the case of hyperlinks, it extends the hyperlink in space. It occurs sporadically throughout the project, and it will take me forever to try to capture all these occurrences. Anyone have any ideas on how to solve this problem? It also seems to be the case sometimes when I copy and paste from Word.
  
  Thank you very much for your help - Janet

  Yes, I always had the same results after you apply two patches. However, I installed version 8, and who took care of the problem. Thanks for the idea!

• PC has not successfully restarted after the installation of updates

  Hello

  I have been updated with Windows Update and asked to restart my PC after the installation is complete, however, my computer froze just at that moment, so I had to press the power button to force it to close. So I don't a not properly restart but forced my PC to stop and I have not a screen saying "Configuring updates" as usual (because there is no restart appropriate but just a forced to close). When I turned on my PC back, I thought that all updates have been lost or screwed up because I don't restart the PC correctly, however, instead, windows said it was "Configuring updates" (from 0% to 30%) and 30%, he said he has been stop and then rebooted my machine and these updates have been 100% configured/installed.

  So my question is, were all 100% installed as said windows updates or was it just a fake reviews? Because I forced my PC to stop rather than restart it when all updates to complete the installation.

  In addition, argues that all updates have been installed successfully in the "Installed updates" menu, too. Please let me know if it of a false notice or not.

  Thank you

  T.

  Since you have not stopped correctly after the installation of updates, updates could not configured correctly

  Follow these steps to see the Windows updates are installed on your computer.

  1. Open Windows update via Control Panel

  2. In the left pane, click view update history.

  Use a system restore to restore your system to a previous state before the installation of the updates

  =================

  1. click 'Start' and type system restore in the search box, and then click "System Restore" in the section programs.

  When you are prompted by the User Account Control feature, click "continue".

  2. do one of the following

  * If there is a recommended restore point, click on choose a different restore point and then click Next.

  * If there no restore points recommended in the list, simply click next to continue.

  3. Select a restore point in which you know that the operating system works and then click on "next".

  5. in confirmation of your restore point page, click on "Finish".

  If this post can help solve your problem, please click the 'Mark as answer"If you find it useful, mark it as useful by clicking the 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• After the conversion of server 2012 system_thread_exception_not_handled winhv.sys

  Hi all

  After the conversion of a machine Server 2012 (that is running Hyper-V) and from VMware vSphere 5.5 I get a BSOD and system_thread_exception_not_handled winhv.sys

  I know that I could use to disable the Hyper-V technology, no matter what else it could be?

  ~ eric

  No, I was simply convert a machine that already had the active Hyper-V role. I disabled Hyper-V and transformed again and it started properly.

  However, I found this article on editing the vmx file to allow a machine with Hyper-V enabled to run as a guest in VMware. http://blog.pluralsight.com/run-hyper-v-vSphere-5-1

  ~ eric

• Why can't change anything after the conversion in .docx?  Missing functions the tool bar?

  Why can't change anything after the conversion in .docx?  Missing functions the tool bar?

  Hi larrys57575985,

  To change a file that you converted to Word format, you will need to download it first and then open it in Word. To download your file, sign in to your account on https://cloud.acrobat.com/files, select the file you want to download and click download at the top of the list of files. Your file will be downloaded in the download on your computer folder. In Word, you may need to click Activate the change at the top of the document.

  Best,

  Sara

• Keyboard does not not after the Conversion of VMWare

  Hello

  I'm trying to run a VMware Conversion of an old laptop as a backup. I run a conversion of VMware and converted in an image of VM® file 9.

  When it is opened in VMware Player, everything works except for the keyboard entries. The only way I can tap on the screen is using either on the keyboard of the screen or connection with TeamViewer.

  Research in Manager device indicates the following error message.

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  Someone has encountered this before and whether a solution?

  Thank you

  Peter Sheridan

  Update:

  I got it to work. I followed the steps described in the following Article and it worked like a charm

  No keyboard or mouse after installing the Mouseware Drivers from Logitech 9.0 on Windows 2000

  • On the registry menu, click Select computer, and then type the computer name of the computer on which no keyboard or mouse.
  • After logging in, click on Hkey_Local_Machine on the Remote_Computer_Name in the menu window , and then navigate to the following key:
    SYSTEM\CurrentControlSet\Control\Class\ {4D36E96B-E325-11CE-BFC1-08002BE10318}
  • Double-click on the UpperFilters:REG_MULTI_SZ: Lkbdflt2 kbdclass value and then remove only the Lkbdflt2 entry.
  • Navigate to the following registry location:
    SYSTEM\CurrentControlSet\Control\Class\ {4D36E96F-E325-11CE-BFC1-08002BE10318}
  • Double-click on the UpperFilters:REG_MULTI_SZ: Lmouflt2 mouclass value and then remove only the Lmouflt2 entry.
  • On the registry menu, click close.
  • On the registry menu, click exit.
  • Restart
    the computer with keyboard and mouse problems. After the computer
    restarts, the mouse and the keyboard should be functional.

• Why my RAW file is removed from the grid of the library after the Conversion to DNG?

  Hi I'm new to LR and need to understand if this is a standard behavior.

  My goal was simply to convert a native file RAW to DNG and have two files in the catalog and visible in the same library.

  I imported a native heap of RAW + JPEG files in my catalog (as separate files). I did it from the inside of LR.

  Then I selected and converted a RAW file to DNG (using library, convert to DNG, with "Delete originals after successful conversion" DESELECTED)

  Against all odds, the RAW file (.) ORF in this case) is removed from the grid view library. A new DNG file appears in the view library, as expected.

  I expect that the. File RAW ORF would remain and the new DNG would be added, that is, I see two files.

  BTW I have Off filters.

  In alarm, I looked at the folder with the Explorer (inside the LR), and (to my relief), the folder contains the RAW format. ORF, JPEG as well as the new DNG format

  Suspecting that the RAW file has been removed from my catalog - I tried to import the RAW format. ORF again.

  Import using - I can view the RAW file, but it is grayed out. And give me the message "seems to be a duplicate of another picture already in the catalog.

  Since I DESELECTED 'Delete originals after successful conversion', I expect to stay visible in the library.

  Seems I did something wrong or I'm a bad interpretation of the process. Is this a normal behavior?

  Also, how to get back the RAW file in library view now that LR tells me that it is already in the catalog?

  Lightroom works as expected.

  I do not believe there is no option to keep the original gross as the dng in the same catalog. Maybe change the name of one of them is an option to consider.

  Explain what you are trying to reach?

• Windows keeps refreshing. Will not stop even after the resumption of the plant.

  A week ago I decided to test my windows aero desktop number. It was gray with a 4.0 remained to a 4.0. After the test, all operable Windows I keeps refreshing. Content not be refreshed but the fact of the shell (if necessary). If I drag the window it will jump to where I started dragging it since. No one knows how to fix?

  P.S. I did a cover of the factory to try to solve, and it did not work.

  Have you also all the updates and service packs - they had erased at the resumption of the plant and must be reinstalled at all.

  You can get in trouble with your device drivers (those on the factory recovery disc may be obsolete).  Go to Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get drivers (and you should get updates for your video card and monitor at least and all the others you have time to do - they can help way beyond simply solve this problem), let the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows:http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows:http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.

  If it does not, it could very well be a real hardware problem (since dismissed pretty much factory relocation a software problem, except for updates unless you have already done as well).  Here's how to do a little troubleshooting on your own equipment:http://elephantboycomputers.com/page2.html#Hardware_Tshoot.  After that, I would either return it to the manufacturer for repair or find a well known local computer repair shop to diagnose and repair (or replace) the problem.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• G62 screen remains black after the windows logo

  Hello

  I have a HP G62-b05SD. I noticed that many people have the problem of simmular.

  I know what makes, but don't know how to fix it.

  So here it is.

  Sometimes when I boot / reboot system screen turns black after the windows logo, but if I wait a while, I do not hear the star tune up windows, but the screen remains black.

  I noticed that this happens when I shut down or restart the system with a usb port (be it a mouse or a stick is not serious)

  If I all out en usb port restart or turn on the machine for the first time this day here, everything starts well.

  So there must be some driver problems I think with usb ports and the screen or something.

  Help, please!

  HP G62-b05SD

  Windows 7 64-bit

  Intel i3

  ATI mobility radeon graphics card

  Ow and when I get the black screen, the hard reset does not always work.

  I also did a startup repair and it showed:

  "If you have recently attached a device to this computer as a camera or portable music player, remove it and restart your computer. If you continue to see this message bla... bla... bla... "

  I hope you can help.

  Hi Frosty1984,

  Thank you for visiting the Forums HP's Support and welcome. I read your thread on your HP G62 - b05SD Notebook and having problems with the starter. Here is a link to BIOS update.

  What is the USB device that is at the origin of the questions?

  Thank you.

• Windows 7 will not be updated after the ranking of the 10 and clean install, image disk etc...

  Hello, I would be very happy to help. I recently tried the upgrade to windows 10 Professional, but then tried to downgrade to 7 Professional and problems have occurred. the downgrade was not working. So, I tried:

  * a clean install with a disc of windows 7 sp1 (from the original e6430 provision for computer Latitude) and found windows 7 would not be updated.

  * updated windows troubleshooting it is constantly with the same error and corrections:

  Problems encountered:

  -windows update error 0 x 80070003 (2016-06-13-T-11_06_27A) not set

  -subscription to the service is missing or damaged fixed

  -problems of recent installation updates fixed

  -problems of recent installation updates fixed

  * Reinstall system backup image

  Same problems as each time I tried windows update it is stuck and troubleshooting that it comes up with the same error above.

  Thanks in advance

  M$ just came out this

  You must use Internet explorer to download from the catalog

  https://blogs.technet.Microsoft.com/windowsitpro/2016/05/17/simplifying-updates-for-Windows-7-and-8-1/

  It is expected by M$, we must now jump through hoops to clean install.

  http://www.ZDNet.com/article/sticking-with-Windows-7-the-forecast-calls-for-pain/

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-Update-remains-at-checking-for-updates/ff3c442e-79a6-40d3-AC35-29e130cebef1

  On an existing installation after the restoration of an image...

  https://support.Microsoft.com/en-us/KB/971058

  And the most recent client update

  https://support.Microsoft.com/en-us/KB/3138612

• PP 2015.3 Edit to tape function suddenly not working properly after the update

  I have maybe in a small percentage. I have grown to love PP and have been using it for controlling certain emissions tape HDSR. I think I went from 2015.0 a.3. The reading seems to have suffered in this update. I get now loss of images of PP did not keep in touch with the reading. So put together it on tape fails and insertion don't will go not to the point where there was a framework has fallen.

  There are a few other issues that are easy to manage, but tried to go through telephone support on this issue.

  -Insert video or audio over half the time after insertion is finished, PP gets stuck. The Strip was inserted but the glass remains and to pass to the next punch that I have to cancel the dialog box.

  -PP will are not more than 8 channels of audio. -Final Cut 7 can arm all12, available on our SONY SRW-5800.

  -After the 2015.3 update the PP would go through the motions of insertion on the Strip, but it would not actually insert audio, so if I was not paying attention you'd think they had set just a note QC. But no! PP just doesn't work. This problem has been resolved by removing the preference PP folder in My Documents on Mac OS X.

  So my main problem still remains that reading is basic and is no longer usable for laybacks professional Ribbon. I had to go back to Final Cut 7 and snap a simple 422HQ to tape. There must be something that I am missing, but the time allotted to me to troubleshoot this with time etc etc is limited. What could have changed in the update for the functions to change the band which makes it unusable now?

  I want to really just to install the old version, but phone support wasn't helping me with that and said I couldn't.

  Mac Pro 5.1 12 Core

  OS X 10.10.5

  32 GB OF RAM

  NVIDIA GTX980

  PP 2015.3

  Black Magic Decklink Extreme 3D +.

  Video Fund 10.6.2

  Tape recorder plugged with cable RS - 232 9-pin

  Adobe must have heard our complaints.  The new update of PP 2015.4 seems to have resolved most of the questions that we take.  I always have a random frame dropped here and there.  Export to tape option is viable again in PP 2015.4.  I'm under PP 2015.4 with the latest drivers from the AJA.

• Windows 2003 fails to start after the conversion from a virtual hard disk with vSphere Standalone Converter 4.0.1

  Hello

  I've recently updated my host to vSphere 4. I've also upgraded to vSphere Converter 4.0.1. However, when I convert a Microsoft Windows 2003 virtual hard drive in vSphere, the resulting virtual machine does not start. He gets just after the BIOS screen, then turns black with only a white line in the upper left corner of the console.

  I tried the hot and cold conversions. I tried changing the different settings of default conversion. I tried to remove the source machine and recreate.

  It worked well under ESX3.5, so I wonder what I'm doing wrong on vSphere.

  Any help appreciated.

  Thank you.

  In v4 disk are in SCSI format only.

  Probably also the source was in the SCSI format... so v7 to the IDE format give you not configured in the bootloader of the disks.

  André

• Exception of Tomcat may not call sendError() after the response has been committed

  CF 10 Developer Edition.

  Windows XP SP3

  When you submit a page that worked well in CF 7 on this machine, I get an error that I've never seen elsewhere:

  ==================

  HTTP 500 - STATUS

  Description: the server encountered an internal error () that prevents to satisfy this demand.

  exception:

  javax.servlet.ServletException: ROOT CAUSE: java.lang.IllegalStateException: cannot call sendError() after the response has been committed to org.apache.catalina.connector.ResponseFacade.sendError(ResponseFacade.java:451) to javax.servlet.http.HttpServletResponseWrapper.sendError to coldfusion.tagext.io.cache.ehcache.GenericResponseWrapper.sendError (GenericResponseWrappe r.java:91) at coldfusion.filter.FormScope.parseQueryString(FormScope.java:501) (HttpServletResponseWrapper.java:1 20)

  etc., which ends in

  Note Track of the full stack of the root cause is available in the Apache Tomcat/7.0.23 logs.

  ===================

  I can't seem to be able to debug or to locate this error: cfabort placed at strategic locations doesn't help at all, and none of my usual work. Debug information are not displayed when this error occurs (although the server is configured to display debug information, and she normally does).

  Totally puzzled.

  LBPSlava

  Maybe adjust the number Maximum of say 100 to 500 POST request parameters.

  CF10admin > server settings > settings > request size limits > Maximum number of MESSAGE request settings > value

  Not sure, you may have to restart CF10 for change to be applied.

  HTH, Carl.