Adjustment of the waiting does not screen saver?

Similar Questions

• Lates version of the cloud of lightroom, the adjustment of the brush does not work

  Move the cursors, cursors is adjusted to jerky movements.  Sliders are nothing without functions of settings even in the recorded history.  Ten window, PC Azus, 16 GB, 64-bit.

  I appreciate your time.  The tutorial was good, but it says nothing about the reset that you mentioned.  I don't know how it works when it works... it doesn't.

  I went to the graduated filter adjustment that worked.  Deleted this work and I returned the adjustment brush.  While playing with the sliders again the brush has started working again.  Don't know why not question or complain.

• Windows Vista crashes and displays a screen saying "the program does not.

  original title: crashing Vista

  Hello

  My Vista PC crashes. I think it has something to do with the screen saver, memory, HARD drive or energy economy. The accident appears as frozen screen and sometimes the program says State "program does not. I have tried different tricks like turning off screen saver, change the setting for power, HARD drive always 'on '... But no changes have so far resolved the issues.

  I was not able to identify a single application or function as the source of my problems...

  My Vista works very well, but if a leave as the computer and screen saver starts or the computer screen will energy efficient, it will crash when I "wake up".

  I've updated the system and all the applications and drivers, but the system is still unstable and cannot be left for an extended period of time before this crash. As long as I'm working on the PC all works. If I leave my PC, I have to turn it off.

  H. Hansson

  Hello

  Did you change your computer?

  Method 1:

  Step 1:

  I suggest you check in safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2:

  If you are able to start your computer in safe mode, I suggest you perform the clean boot and check.

  Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  To set up the computer in a clean boot, follow the steps in the link: How to perform a clean boot

  http://support.Microsoft.com/kb/929135

  Note: After checking in the clean boot, follow step: 7 article to reset your computer to normal startup.

  Method 2:

  I suggest you to see the link and check out the program does not.

  What does it mean when a program is not responding?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-does-it-mean-when-a-program-is-not-responding

  Method 3:

  I suggest to download and install the Microsoft safety scanner and run the scan and check.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  See also:

  Ways to improve your computer's performance

  http://Windows.Microsoft.com/en-us/Windows-Vista/ways-to-improve-your-computers-performance

  Optimize Windows Vista for better performance

  http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance

• Why the Firefox 4 is not restore all the sessions that were open at the time? Before the update, I've been invited either ("SAVE AND QUIT") or even if she closed UNEXPECTEDLY (crushed), he AGAIN restored. New version does not offer "save and exit".

  Question
  Why don't Firefox4 restore any sessions that were open at the time? Before the update, I've been invited either ('SAVE AND QUIT'), or even if it closed UNEXPECTEDLY (crash etc) it STILL restored everything. New version does not offer "save and exit".

  Now, Firefox always stores the old session which you can access from the history menu by selecting "restore previous Session."

  If you always open the last set of tabs, another approach is the following:

  1. Click on the orange button Firefox, then select options to open the options window
  2. Go to the general Panel
  3. Change the setting "When Firefox starts" to "show my windows and tabs from last time '.

• MS-DOS 16-bit subsystem. The system does not support the mode full-screen.

  I when even run some dos applications, which allows to work ok under XP mode full-screen, but when you use Vista or Windows 7. I can only rum these applications in a window.
  The error message is

  MS-DOS 16-bit subsystem. The system does not support the mode full-screen.

  Please is anyway I could run in fullscreen... I don't want to use a virtual machine.

  Any advice would be greatly appreciated

  Of Ernest24

  http://www.dosbox.com/

  You might be interested in reading about DosBox.

  See you soon. Mick Murphy - Microsoft partner

• EVGA Nvidia Geforce 8400 GS issues: [FIXED] screen and the sound does not [FIXED] virgins

  I have a HP Compaq dc5750 I just got an EVGA Nvidia Geforce 8400 GS, and I'm having a problem with it. I disassembled the computer cover and installed, replace the cover, turned on the computer and the monitor not power not on. So I decided that I had to disable the integrated graphics card (ATI Radeon Xpress 1150), then I added the card even once. Still happens... Monitor powers on without the new graphics card. My monitor is 8 years old and lacks a DVI port. I have to connect the monitor to the graphics card to make it work? I want just this card to work.

  UPDATE: white screen problem is fixed, but the sound does not (no audio installed device) even if the audio driver is installed

  Hello

  This kind of question is mainly caused by the sound card driver is not not compatible.  Contact the hardware manufacturer directly to confirm the driver is compatible or not.

  Test the issue with another pair of speakers or headphones, or you can plug the device of reading to another port to see the result.

  In the meantime, you can also see if the playback device is disabled. To do this, please check the following steps:

  1 Please, click Start-> Control Panel-> Sound.

  2. on the playback tab, right-click on the empty square and then click on "show disabled devices".

  3. check if your playback device is disabled. If so, right-click on it and click Activate.

  1. Please click Start, type services.msc and press ENTER.

  2. double-click on Windows Audio.

  3. click on the 'general' tab. Make sure the "Startup Type" is "automatic". Then please click on "Stop" under "Status of Service" to stop the service.

  4. click on "Start" under "Status of Service" to start the service.

  Reinstall the audio device

  1. click on start, type Device Manager, click on Device Manager to open it.

  2. expand ' audio, video and game controllers ".

  3. right click on your audio device, and then click on uninstall.

  4. check "delete the driver for this device".

  5. click on OK.

  6. after that, restart the computer, the device and the driver must be reinstalled automatically.

  Please check if the problem can be solved now.

  If the problem persists, please install the latest driver of sound card on the manufacturer.

  I found the problem... once again: I had to go to the BIOS and enable Audio integrated. My audio integrated uses Realtek High Definition Audio instead of Nvidia High Definition Audio.

• The system does not support the mode full screen for cmd

  Respected Sir/Madam

  I am user of Windows vista HOme basic... .also I have Windows 7 user... I'm basicllly, a student in computer engineering...

  I get an error "The system does not support the mode full screen" for cmd.exe in C++ turboo or JDK.. .then I getproblem by entering n compiled the program...

  my PC configuration is

  :-AMD 6000 + dual core Athlon 64 X processor

  Monitor:-Viewsoni

  RAM :-1Go

  Please give me a solution to problem 4 I wanted to run cmd mode full screen...

  your help will be appreciated by me highlly...

  thanking you

  Philippe

  Vista + do not support a command prompt full screen, as indicated by the message. You can manipulate the available to the command window to specify the width and height to be as big as you want, but this isn't quite the same thing...

• HP Envy 15 "touch screen power LED appears, but the fans does not and the screen does not light

  Hello!

  I'm a student in computer engineering at the University of Waterloo 1A, and I run a very serious problem with my HP Envy 15 "TouchSmart laptop computer running Windows 8.1. It is a problem that just started today, and I'd rather have a first support here before going to see the technical support Office sometimes tomorrow. It has to do with the screen and the fans where the Power LED lights in white, just as when the laptop works properly.

  (I have warranty on the laptop when it was purchased last June, except that if I find that I need to get a replacement, I'll lose all my work, I did on that since I started my semester.) It's so silly of me not to have all my work saved on a backup, because I have an external hard drive. Problem is, I've had too many problems in getting myself organized, I'm not being open-minded as I should, and worse, I'm not a balance between life and work at home.)

  Before I had my MATH 117 conference (Calculus 1 Engineering), I was in a nearby lab where my laptop was open and turned, works correctly. I've had NetBeans IDE running since I wanted to work on the second part of my current assignment of CS 137 (principles of programming). Because it was almost time for my presentation, I closed the laptop by simply moving the screen down on the keyboard, where it goes into mode 'sleep'. (Whenever I flip to the top of the screen, the laptop is supposed to return, and the sliding screen of Windows 8.1 connection will appear.)

  When I took my seat for reading, I wanted to spend a little time to work on my programming assignment. However, after the reversal of the screen to the top, instead of having the login screen appears, I encountered the problem: the power supply light is showing a white light, but I don't hear the fans between the ventilation openings on the left side of the laptop and the screen does not light. I tried to take the power for several seconds and once button at least 10 seconds, except that the power light continues to display on a white light. The Commission of the Wi - Fi light is not displayed.

  Whatever it is, I don't want to take out the battery because I have that on my last laptop, and it's from there that I couldn't turn to the former, a new market. If I leave the Envy laptop battery, it will short-circuit the connections between the battery and the computer, and so several components will FRY. For now, what I do let the laptop is to empty the load on the battery. Then, once I noticed that the power light does not project a white light, or plug in the AC adapter and try turning the laptop on the power button.

  It will take a little while for the circuit drain the load on my battery but...

  Anyway, please would you be kind enough to help me with this problem? I would really appreciate if you can give me several recommendations. Thank you!

  Hello @GregPDesWHP,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I read your post on how your laptop is not on, and I'd be happy to help you in this case!

  In order to restore the features of your computer once more, I recommend you follow the steps described in this document on the computer does not (Windows 8). If the problem persists after having exhausted all the steps in this document, I recommend you contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  I hope this helps!

  Concerning

• Vista 64-bit Black Screen of Death, with just a mobile available slider, the system does not start in safe mode.

  My system worked properly on 25 April and then something happened and now the machine comes back with "Start menu options" but will not start in one of the listed options, modes result in the same outcome.  System also starts on the Vista CD.

  System begins to boot normally, shows the tracer Green Windows at the bottom of the screen, then the mouse pointer appears and moves but the rest of the screen remains black.

  That's it, that's all what he will do.  I checked the settings of the computer and ran the diagnostic tests available and everything seems to go fine and passes all the tests.

  I worked on my own computers for over 20 years and never been stumped before, but I must say this is a first, and I have no idea what to try to do it now.

  Help or direction is appreciated.

  original title: Vista 64-bit Black Screen of Death, with just a mobile available slider, the system does not start in safe mode.

  See if there is a way to tecover clean your data before doing a restore to conditions of factory that will wipe the drive of all.  You can use Knoppix http://www.knopper.net/knoppix/index-en.html with a good ISO as Copier: http://isorecorder.alexfeinman.com/isorecorder.htm as well as a blank CD (which you will need to do on another computer).  Starting on this disc and lla should give you enough access to the system (if you do not have any other means) to backup your important data.

  So since you seem to have no other alernatives, you can try retoring the original factory computer options. However, if it is a hardware problem as could very well be the case, you can still encounter problems after even this drastic step.  Then you will need to consider in a reputable computer repair shop (NOT Geek Squad or or a any of these big store centers) or maybe even go back to the manufacturer for repair.   Check out several options and compare the costs, quality and guaranteed and then make your best decision.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• The mouse does not work on a few screens in windows 7

  Hello team
  I'm using a windows 7 64 Bit OS. My mouse has stopped working on a few pop - up screens.

  Steps to reproduce:
  Start > Control Panel > program > Java > a pop up appears and my mouse does not work on it.

  This is just one example.

  The same happens when I use Oracle EBS. The mouse does not work on the pop-up forms of oracle.

  Can anyone help.

  Thank you
  -

  Hi NagaKotagiri,

  To provide the proper resolution, I would need more information on your side.

  What is the number and the model of the computer and the mouse?

  This problem can occur because drivers damaged or incompatible, lack of updates, the incorrect device settings or hardware problems.

  I suggest you try the procedure described in the article and see if it helps.

  Mouse, touchpad and keyboard with Windows problems

  http://Windows.Microsoft.com/en-in/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows

  Check out the link for more information.

  Change the settings of the mouse
  http://Windows.Microsoft.com/en-us/Windows7/change-mouse-settings

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• When I click on a tile (windows8.i) screen just flicks and the program does not open what went wrong and can I fix it?

  * Original title: opening with a tile on the start menu

  When I click on a tile (windows8.i) screen just flicks and the program does not open what went wrong and can I fix it?

  (Moved to customization and ease of access)

  I thought I made the text in a link from my mistake. Here is the page: solve the problems with an app

• I use Adobe Acrobat Pro and when I click on save as PDF... PDF reader enable adding text in the Documents does not appear. Why?

  Can you please tell me why?

  With my Adobe Acrobat Pro, when I click on save as PDF... PDF reader enable adding text in the Documents does not appear.

  Thank you

  Elina Mackay

  Adobe change Acrobat a lot between releases. Make sure you follow instructions to the same version you have.

  If this looks OK, let us know the exact version you have (help > about Acrobat Pro).

• I have published my muse built Business Catalyst site and all from the 'Site in the web browser view' function in the program of the Muse does not work. Screen comes up with a message that it cannot locate the page and suggests I check the ip address.

  I recently published my muse built the Business Catalyst site for preview and all from the 'Site in the web browser view' function in the program of the Muse does not work. Screen comes up with a message that it cannot locate the page and suggests I check the ip address.

  Hello Jimw93000314,

  Are you preview site in the edge browser? When you preview the page in the browser Muse create a local server to give you the preview in the browser. With the edge browser, there was a reported issue to access the local server.

  Please click the link below that shows the steps to enable the browser to edge.

  http://StackOverflow.com/questions/30334289/cant-open-localhost-in-Microsoft-edge-project-spartiate-dans-Windows-10-APER cu

  I'm sure this will help.

  Kind regards

  Vivek

• I bought and installed Photoshop elements 13. The program does not open says bur I have to register on my Adobe ID that I have. Then, I get a box saying I'm not online or my computor clock is out of adjustment. The clock is correct for the time and I have

  I bought and installed Photoshop elements 13. The program does not open but says I have to register on my Adobe ID that I have. Then, I get a box saying I'm not online or my computor clock is out of adjustment. The clock is correct for the time being, and I am on the line what should I do?

  See the link below:

  Photoshop elements 13 - can't get a response code in the offline activation method

  Re: I have uploaded a second copy of Acrobat Pro DC to my PC. By clicking on the icon gives your computer is offline or your computer's clock is set incorrectly?

• How to cancel my membership creative cloud when the option "manage the plan" does not appear as an option on my screen?

  How to cancel my membership creative cloud when the option "manage the plan" does not appear as an option on my screen?

  Cancel your subscription or membership. Creative cloud