ADL crashing with AIR 3.1 overlay

Hello, I stumbled upon a very strange question. I have developed an application with the superposition of 3.1 AIR for some time now without any problem.

All of a sudden this morning, Flash ceased to compile my Air approx. ADL hangs whenever he throws. I know 'suddenly' does not say much, but it's pretty much what happened. The strange thing is that this has nothing to do with the app I'm developing. Restarting my computer, open flash, create a new project with the AIR model and compilation (with the empty project) always blocks the ADL.

The only thing that has changed since yesterday and today is that last night I tried as a proof of concept to compile an iOS since an earlier application app I had, using Packager of iOS in Flash CS5.5, I was able to install it successfully on my iPad and everything and I closed flash after that. This morning, nothing will compile.

I revenue AIR 3.0 to my backup 2.6 (the one that installs with Flash) and things have started to compile again. It behaves normally after doing this. I thought that my SDK has been corrupted somehow, so I downloaded a new one from the Web site (here: http://www.adobe.com/products/air/sdk/) and did the overlay again, and after that he started crashing again.

Another thing is that ADL plant ONLY when AIR 2.6 is selected. Once again, I've created a new empty project and chose AIR 2.5. ADL crashes when you test the movie, I chose AIR 2.6, AIR for iOS and AIR for Android, and it crashes every time. Revert to the original SDK (2.6) stop the fracas in all versions.

Is there a way I can get a log of the crash of the ADL and post it here, so we can dig deeper problem?

Thank you

Fernando Toledo

Update the post to talk about how I solved it.

Kudos to Pitt Marty to find the answer: http://stackoverflow.com/a/7909697/1098905

So, it's always a little embarrassing for the Flash IDE. I don't know how this can get so darn corrupt anyway. It turns out that this flashbug (the firebug add on extension of firefox), this is what has caused all this. When flashbug is installed, a row is added in the config of the flash player mm.cfg file.

This file is located on a Mac in: / Library/Application Support/Macromedia/mm.cfg (note this is not the library, is the highest level library on Macintosh HD). I don't know where this file is located on windows. The line that Flashbug adds is:

PreloadSWF = / Users/martypitt/Library/Application Support/Firefox/Profiles/vxtpdg3i.default/extensions/ [email protected]/chrome/content/flashfirebug/flashfirebug.swf

When I was testing my iOS (export of FLASH) app I got a VERY strange error:

TypeError: Error #1009: cannot access a property or method of a null object reference

at com.coursevector.flashbug::Profiler/allCompleteHandler()

Obviously I was not using this class so it was very very strange for me. I did a little research and discovered that there is a known with Flashbug bug: http://code.google.com/p/flashbug/issues/detail?id=32

I completely uninstalled Firefox flashbug, and that's where the thing started to plant. When I found the linked above stackoverflow post I could find that the line was still partially there, it was like this:

PreloadSWF =

But without any parameter Yes ADL crashed inexplicably every time because he probably did not know how to parse the mm.cfg file. I deleted the line and now it works again. Don't know how the process of debugging any player can break with a third-party extension but it is aweful.

Tags: Adobe Animate

Similar Questions

  • Problems with AIR 3.6 overlay...

    Hello

    I try to install the AIR SDK 3.6 and...

    "Could not resolve < s:ViewNavigatorApplication > to a component implementation".

    Huh?

    I made a dozen different SDK replaces and never seen that!

    All the clues that I forgot to copy in / update / replace / remove / set up?

    Thank you

    G

    It's OK, Colin Holgate solved it for me here: http://forums.adobe.com/message/5129146#5129146

    G

  • Notes crashing with El Capitan 10.11.6. Are updated recent bug fixes.

    Notes crashing with El Capitan 10.11.6. Are updated recent bug fixes. It always sends Apple incident reporting, so I am surprised that they have not yet set. This is a brand new Apple iMac computer, I went for the best to have a trouble-free operation (I hate LAGS). But the computer hangs out sometimes which is disappointing. No one knows what to do to keep my computer running efficiently? In addition, someone at - it a solution to the issue with Notes crashing?

    Try each of them in order. A test to see if the computer works properly:

    1. Reset the PRAM
    2. Reset the controller (SMC) system management
    3. Start the computer in Safe Mode, and then restart normally. It's slower than a standard home.
    4. Repair the disk by booting to the HD recovery immediately after that the chime press the command and R keys until the Utility Menu appears. Choose disk utility and click on the continue button. Select the withdrawal (usually Macintosh HD) volume entry in the list to one side.  Click first aid button in the toolbar. Wait the fact button appear. Disk utility and return in the Utility Menu. Restart the computer from the Apple Menu.
    5. Download and install the update of OS X El Capitan 10.11.6 Combo.
    6. Reinstall OS X by booting from the Recovery HD using the command and R keys. When the Utility Menu appears, select reinstall OS X and then click on the continue button.
  • Google Chrome crashing with update.

    Google Chrome continues to crash with the new update for El Capitan on a Mac book pro.  How can this be corrected?

    Is Google Chrome, the latest version?

  • Help please my iPad crashing with lines to the bottom of the screen can only help me

    Please help my iPad keeps crashing with lines running down the screen.

    Restore factory settings: use iTunes to restore your device iOS to factory settings

    If it does not help there is material damage

  • PC crashes with DBO when downloading a file using Firefox to my iPad

    PC crashes with DBO when downloading a large file via WiFi to my iPad and using AVPlayerHD player on the iPad. There is no report of error in Firefox, just the crash dump Windows 7 due to the accident. Only the combination of Firefox on PC and player AVPlayerHD on iPad causes this crash. Any other combination of PC and iPad works.
    Examples:
    Firefox on PC and iFile on iPad works well.
    Google Chrome on PC works with all programs on iPad.
    Firefoc on PC and player AVPlayerHD on iPad crashes.

    So you get a Blue Screen of Death on your Windows Machine? You have the exact error codes that appear when you get this blue screen?

    Blue screens mean that you have a problem with a driver, hardware or virus on your PC, not with Firefox. I try to launch a program of analysis such as http://www.resplendence.com/whocrashedand see if she can tell you what triggered the accident. Also, make sure that all your drivers are up to date on your computer (especially the graphics driver: update your drivers graphics to use hardware acceleration and WebGL) and check the virus (Troubleshooting Firefox problems caused by malware).

    After that, if you still get the blue screen and crashed does not help, I would say to try to test your RAM with a utility such as http://www.memtest.org/

  • Satellite Pro M10 freeze and crash with some programs

    Hello

    I have a M10 Pro Satellite...
    A few weeks ago it's freeze and crash with some programs like wmpayer, messenger... I delivered to the authorized agent and they had not detected any problems.
    Already I have formatted several times, but the problem persists.

    Any idea what this may be?

    Thank you

    Hello

    For me it looks like you might have a motherboard problem. Formatting removes the chance that it is a software problem. Try taking 1 stick of RAM and test with it. If she continues to crash, remove that stick and try it. If she does it with the two RAM then those who are ok. HARD drive is not the culprit, so now he could either be processor or MB. Find a program to measure the heat from the laptop and run some heavy programs do overheat. If the temperature goes up and then it crashes, it could just be overheating. If it continues without overheating you either have a CPU or MB problem. I hope this helps.

  • iTunes, sync to Crash with Seven Pro 64-bit

    Hello

    iTunes Crash with this error message when I try to sync my iPhone 6 on my PC with 7 Pro 64-bit

    Problem event name: APPCRASH

    Application name: iTunes.exe

    Application version: 12.3.2.35

    Application timestamp: 56689eb6

    The default module name: CoreFoundation.dll

    Version of the default module: 1.750.32.0

    The default module timestamp: 55dd4433

    Exception code: c0000005

    Exception offset: 0009f63a

    The system version: 6.1.7601.2.1.0.256.1

    Locale identifier: 1036

    Information extra No. 1: 0a9e

    Information extra No. 2: 0a9e372d3b4ad19135b953a78882e789

    Information extra No. 3: 0a9e

    Information extra No. 4: 0a9e372d3b4ad19135b953a78882e789

    Read our privacy statement online:

    http://go.Microsoft.com/fwlink/?LinkId=104288 & clcid = 0x040c

    If the online privacy statement is not available, connection out of the version:

    C:\Windows\system32\fr-FR\erofflps.txt

    Can you help me solve this problem?

    Thank you

    For general advice, see troubleshooting problems with iTunes for Windows updates.

    Error sharing a trend similar to that in the third box, so a similar approach should work. Looking for CoreFoundation.dll in:

    • C:\Program Files\Fichiers Files\Apple\Apple Application Support or
    • C:\Program Files (x 86) \Common Files\Apple\Apple Application Support

    Delete if found, then repair Apple Application Support.

    The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach. Review the other boxes and the list of documents to support more far down page in case one of them applies.

    Your library must be affected by these measures but there are backup and restore advice elsewhere in the tip of the user.

    TT2

  • Compaq Mini 110 crashes with a fatal error and the system put an end to CNU93533NQ. No password-Help please!

    Staright from boots of Compaq Mini 110 of my youngest son upward in a password protect mode which I don't know and then crashes with a fatal stop error and system CNU93533NQ.  It has some really important courses he needs to present any help would be really appreciated

    Hello

    Enter: e9lofqff95 (3rd character is a lowercase L)

    Kind regards

    DP - K

  • Satellite A100-225 keeps freezing and crashing with the new HARD drive

    Hi all

    I have a Satellite A100-225 with a 100 GB SATA Hitachi drive I int it that recently started showing bad sectors. Then I bought a Hitachi 320 GB SATA II drive to replace it. I tried the drive and it was recognized right away, so I didn't need to change the SATA speed. I ran the restore a disk installed newest. The problem I have is that the computer keeps freezing and crashing with the new drive. It takes a lot of time to load up when turned on and there is a noticeable to untermittant delay when you drag the cards around solo.

    I tried to run the Hitachi drive test and it comes back fine. I also tried to turn the SATA speed of the drive down from 300 to 150 via the firmware, and although I saw a slight improvement, it is still not right.

    I talked to Hitachi and they say that he could not be 100% compatible, so the problems. Someone at - it else sucessfully set up a replacement for this notebook drive and if so what make and model. Has anyone else had simular problems?

    Thank you

    Years ago, I've updated yet more former Satellite M70 with SATA HDD (270 GB if I m remembering well) and everything was fine.
    In my view upgrade with SATA HDD normal shouldn't be a problem. Do not SATA II because it will not work faster.

    I can't say for sure, but there must be a compatibility problem.

    Let's see if someone else had better luck with the upgrade of the disk on the Satellite A100.

    Have you checked this forum with advanced search option? Maybe you can find some old NET on upgrade the HDD on A100.

  • apple mouse is bluetoothed with air of the ipad 2

    apple mouse is bluetoothed with air of the ipad 2

    N ° the iPad is not programmed to have a cursor.

  • Satellite L850 - Intermittent crashing with BSOD

    My Satellite L850-1LK crashes with the following error message intermittently: DRIVER_IRQL_NOT_LESS_OR_EQUAL (athw8x.sys). An online search in some other forums suggested that I should update the driver for my Atheros wireless network adapter. I did - including uninstall it completely before reinstalling with the driver downloaded from Toshiba's own site.

    I always get the BSOD, so any other suggestions would be appreciated. (I'm under 64-bit Windows 8)

    Hello

    What version of driver and what version of BIOS that you use?

    I had the same problem but not with the Toshiba laptop.
    I discovered that the installed McAfee utility causes the BSOD.
    I suggest that you remove and replace with another software antivirus like Avast! or Avira antivir.
    Both are free and can be downloaded for free.

    But of course I updated the Atheros Wlan driver too!
    You must remove the driver and uninstall the driver properly package.
    This can be done in Device Manager!
    Then clean the operating system using CCleaner!
    Reactivate the wireless lan, then install the latest driver.
    Previous updates must have replaced only part of the package of driver causing the problem.

  • iMac crashes with gpu reset from model

    Hi guys,.

    Since that I've updated to El captain, my iMac does not last over 5-10 minutes. He continues to break up with a black screen or gray, for the most part by watching youtube.

    In the Console, I found a lot of crashes with "GPU reset":

    Wed Jan 27 19:34:24 2016

    Event: GPU Reset

    Date/time: Kill Jan 27 19:34:24 2016

    Application:

    Path:

    OS version: Mac OS X Version 10.11.3 (Build 15 d 21)

    Graphics hardware: AMD Radeon HD 6970 M

    Signature: 0

    Report data:

    GPURestartReportStart

    ------------------------

    Hung channels: PM4

    ------------------------

    AccelChannel [00]: PM4

    Pending order from: UnknownCtx

    PendingCommandTimestamp: 0x00000001, TotalDWords: 0 x 00000415, GART Offset = 0 x 0000000040080000, stamp_idx = 0, estamp = 0 x 00000001

    PendingCommandStart:

    PendingCommandEnd

    ------------------------

    [00] HWChannel PM4: enabled, NotIdle

    LastReadTimestamp: 0x00000000

    NextSubmitTimestamp: 0x00000002

    [PM4, ts:0 x 00000001]: no waiting semaphore

    [PM4, ts:0 x 00000001]: semaphore signal: 0xffffff8049d66e00

    HWSemaphore 0xffffff8049d66e00 Signal Event: [PM4 channel [0] TS:0 00000001 lastReadTS:0 00000000 x x]

    ------------------------

    HangFlags 0 x 00000006 GPU: AsicHangState 0 x 00000006, AsicResetRequirement 0x00000002

    IndividualEngineHang: 0

    NonEngineBlockHang: 1

    FenceNotRetired: 1

    PerEngineReset: 0

    FullAsicReset: 1

    HangEngineBitmap: 0x00000000

    ------------------------

    PCIe AMDBartsGraphicsAccelerator material: [1:0:0] State: ENABLED

    Configuration: deviceBits: 0 x 00816720, capabilityBits: 0 x 30940100

    TotalVideoRAMBytes: 0 x 0000000040000000 (1073741824)

    ------------------------

    [00] engine PM4: enabled, NotIdle

    [00] PM4 Channel: enabled, NotIdle

    ------------------------

    [01] engine AIMS: enabled, Idle

    [01] DMA channel: enabled, Idle

    ------------------------

    [03] UVD engine: disabled, Idle

    [02] UVD Channel: disabled, Idle

    ------------------------

    [04] engine SPU: disabled, Idle

    [03] SPU Channel: disabled, Idle

    ------------------------

    : * GPU Debug Info check out *.

    : 0 00006720: 0 00000092: 0 x 00000001 x x: 0 x 00000018: 0x0000a880: 0x00000001: 0x00000001: 0 x 00006720

    ...

    complete log can be found here:

    https://drive.Google.com/file/d/0B0vWxunrQlxuLXRHd184dlhUZTQ/view

    If I'm lucky, it will restart, but sometimes I'm stuck on a gray boot screen

    I tried:

    -Reset the PRAM

    -force the disk check

    -unplug and wait 30 seconds.

    I'm out of ideas

    The SMC reset 2 - 3 times to reset the management system (SCM) controller on your Mac - Apple Support disconnect at the back of the iMac not the wall.

    Try a boot sure try safe mode if your Mac does not end commissioning - Apple Support

  • Satellite L20 error: DVD - RAM crashes with a blue screen with the use of cd-audio

    Hello world

    I have a very annoying problem: when I use audio-cd, my Satellite tends to crash with a blue screen. When it crashes, blue screen, scrolls and immediately a black screen and a restart follows.

    It is probably a driver problem, because I have three audioprograms installed (Windows Media player, Sonic Stage MiniDisc and I-tunes).

    Can someone give me advice? Thanks in advance

    Klaas

    Hi Klaas,

    It would be useful to know what the error message is when you get the blue screen. I suggest that you disable the restart automatic installation so that your laptop stops on the blue screen and you can read the error.

    To disable the auto restart: -.

    1. right click on 'My computer' icon and then click on "Properties".
    2. click on the "Advanced" tab
    3. click on 'Settings' in the section starting and recovering (towards the bottom of the window).
    4 uncheck 'automatically restart '.

    Please post again all the details of the blue screen error message.

    concerning

  • PC crashing with TOSHIBA USB Hybrid Tv Tuner

    I have recentlly bought a USB tv tuner hybrid Toshiba. I have connected the device to my laptop before installing the software (which must have read the manual...). However, after the cancellation of the device installation wizard I installed the software and plugged the unit... the BONE has found the new device with the following notification of the ball: "USB tv tuner hybrid found (without firmware)" and a moment later my pc crashed with a blue screen and then stop. I tried to re install the software, update the software (savvy tv 2.0) and nothing happened. My laptop kept crashing the same way... I called Toshiba technicians, suggest that i uograde firmware of the laptop... (? maybe they mean the motherboard BIOS? who knows...?).

    The laptop is not a Toshiba. However, it meets the minimum requirements. My OS is Windows XP SP2, my graphics card is ATI Mobility Radeon 1600 and my USB ports work fine with everything. I use an external display instead of the laptop screen (don't know if its relevant...)

    Any help is welcome because I am this close to return to the where I bought this product and request a refund.

    Thank you.

    Hello

    I have USB DVB - T TV tuner and I checked with WXP and Vista. Works well. I don't know what operating system you are using, but maybe you need to download the latest version 2.0 of the Toshiba download page.

Maybe you are looking for

  • movie from DVD to AVI on Windows 10 files

    Hello After that I updated Windows 10 of 8.1.  I made movies DVD of AVI files, and I can't play on my Samsung DVD player. I need help please. Thank you WND WND

  • Firmware corrupt BDX3400SE Blu - ray player

    Firmware in this link does not work: http://www.dl.toshiba.com/player/NA/GB/EN/BDX3400SE.html There is more discussion about this in the forum USA from Toshiba:http://forums.Toshiba.com/T5/Blu-ray-DVD-players-recorders/BDX3400SE-can-t-upgrade-firmwar

  • Re: Not possible to enter sleep/standby extended - standby/hibernation is not allowed now

    No matter what method I use to try to switch to Stanby or hibernation mode, a prompt indicating "standby/hibernation is not allowed now" appears. For example, this happens when I go through start-> shut down the computer, or when I close the lid of m

  • How to install Windows XP Home on Equium A60?

    Am new to all this medical forum so I hope I can help, I am trying to install windows XP home on my laptop Equium girls. When I try to install XP, it comes up with a SETUPDD. SYS error, I searched the net to find errors and he says I need a BIOS upda

  • Satellite A100 Vista brightness will not work after driver update

    Hey,. I can't adjust my brightness. I ' t worked fine till updated my video driver.I downloaded the driver from NVIDIA.com. The 7000 series. I have a 7600 graphics card.Is that I have try to change the brightness using Flash cards blocked the entire