Satellite L850 - Intermittent crashing with BSOD

Similar Questions

• Satellite Pro L770 crash with BSOD

  Hello

  I got a L770 in November and he suffered from random crashes where I get a blue screen.
  I managed to read it creates a data crash dump who fails,
  It does not say a lot of things but just not long enough for me to read more.

  After the crash dump data he fails, then it tries to restart but is unable to as he can not find a source to start.
  If you turn it off and turn it back on again, he launched his fine again and works perfectly until the next crash. has anyone have any idea what it could be like it's really starting to annoy me now?

  Thank you
  Matt

  Hello

  The error number is not really useful.
  I recommend the event viewer in Windows 7
  Here you can see the event ID and source of the BSOD

  You can search for this event on this page ID
  http://EventID.NET/

  Then you should get more details on the BSOD

• Satellite A60 crashes with BSOD using the WLan connection

  Hello

  The son laptop works well 24/7 If you use the local cable network on web access, but as soon as we install Wifi it crashes on a regular basis (2 or 3 times an hour) with BSOD error messages - normally those helps Microsoft cant (via the event viewer report) with but it is often talking about Toshiba phone services but no solution.

  Tried two (netgear) pcmcia & usb (agere) wifi cards - exactly same problem can not maps.

  In desperation re-formatted & resettled Xp & all drivers Toshiba of original Cd of Tosh, then Xp Sp2 & then all the updates/fixes engineering including the bios from site Web of Tosh. Still crashes.

  If the software has - v installed or not makes no difference.

  A 512 extra ram on top of 256 original.

  Any ideas?

  Please believe me that it is not easy to say why the BSOD appears!
  From my personal experience, that the BSOD can occurs because of the problem of critical software, or because of the problem of equipment.

  In your case, it looks like a hardware problem (this is my personal opinion)
  Generally, the laptop should work with the external WLan USB card. I put t see no reason why it shouldn't work t.

  You said that you have updated the RAM on this laptop, I noticed on many laptops than similar issues after a RAM upgrade.

  For example; I inserted the new 1 GB RAM on my old Satellite and received a BSOD. I used a compatible but the BSOD appeared sometimes.
  After the passage of the modules to another location memory my laptop works properly!

  Please check this box. Maybe you could check if the same thing happens with your old module!

  Good luck

• Satellite L850: Flash crashes after updating video driver 8.982.7 AMD

  Hello

  I have this problem where I can't play a flash streaming after that I did a clean install of drivers in the subject. (8.982.7 - 120808 a (display - 20130925091525.zip))

  Flash crashes everytime.
  Flash banners are displayed, but while streaming - youtube etc does not work.

  OS: 8-64 Bit Windows
  Here is the description of the driver:
  display - 20130925091525.zip 25/09/13 v8.982.7 AMD display driver - 120808 a

  + This driver improves the functionality of display device and allows you to make various settings, such as color management, monitor properties or control of overlay. You can also get help if you have related troubleshooting display issues. +

  _Models: _ + C850 satellite, Satellite C855, L870 Satellite, Satellite L850, Satellite Pro C850, Satellite Pro C870, L875 Satellite, Satellite C875, Satellite Pro L850, Satellite C870, Satellite Pro L870 +.
  + System: 8-64 Bit Windows +.

  Driver Toshiba page provides another ADM display drivers for Win 8 64 bit.

  -8.982.7 - a 120808-1450
  -8.982.7.

  I recommend to uninstall the current driver (this in Device Manager), reboot the laptop and test one version drivers mentioned.

• Satellite L850-1R4 - freezing with its high-pitched humming

  Greetings.

  I got this computer at my school, it was packed and not open as far as I know (to my knowledge, he has not opened at least em). About 5 - 6 times every day (duration of 6 hours at least) my computer crashes, with a very large slope of gurgling that sounds like a bloody drill.

  I've updated my drivers and all, but this still happens and I need to restart the computer to be able to continue to work/play/watch anything.

  How can I solve this?

  Thank you and best regards.

  Bertrand S.

  Can you tell us more about this machine?
  What operating system is installed?
  A special software is installed on the t?
  Your notebook freezes when you use some specific software or some of the measures?

  Where a part of the laptop comes this buzzing?

• dv6t 7000 image crash with BSOD when coming out of sleep

  My power settings are set to put the laptop to sleep when I close the lid.  As soon as I open the cover, things are fine until I have slide the fingerprint reader.  Laptop fails with BSOD and the only way out is to maintain the power button forcing a hard stop.  I turned off hybrid sleep.  I've turned off the options in management of State of PCI Express - Link Power and also two options in settings USB selective suspend settings USB who discovered reading this forum.  Now, I'm afraid to have this machine in standby mode.  Nothing is ever good happens next.  Help.

  Hi DennyC,

  I will do my best to help you with your problem of hibernation mode. Could you please follow the steps described in this document for using sleep or Hibernation .

  Let me know if this helped.

  Thank you

• Windows 8 will randomly crash with BSOD

  My laptop Acer keeps restarting with BSOD. Ive tried refreshing and rearming windows 8 without result.

  According to the instructions in the thread BSOD I download a zip with the MSINFO file and the the accident dmp file.  The zip file can be found here https://drive.google.com/file/d/0B7xzCvOBhOAYaVdZcUZXX0VHMUU/view?usp=sharing

  The BSOD throws a KERNEL_DATA_INPAGE_ERROR sometimes and sometimes other errors.

  Please indicate how I can solve the problem.

  Thank you.

  First of all, you need to update to win 8.1 which, in itself, can solve the problem.

  Secondly, you have several applications of malware (McAfee and Symantec) and is never a good idea.  I remove the two and use the built in Defender in its place.

  These accidents were related to the corruption of memory (probably caused by a driver).

  Run these two tests to check your memory and find which driver is causing the problem.  Launch auditor.  You don't need to run memtest again unless the auditor is not the cause, or you want to.

  If you are overclocking anything reset by default before running these tests.
  In other words STOP! If you don't know what it means that you're probably not  
  
  
  
  
  1-Driver Verifier (for full instructions, see our wiki here)
  
  2-Memtest. (You can learn more about running memtest here)

• Satellite C660 - 2 EV crashed with BSOD and won't start

  My laptop Satellite C660 - 2 EV running Windows 7, without apparent reason crashed to blue screen of death, after which it would not restart.

  I tried to reboot in safe mode with the function keys, but it is the extent of loading: windows\system32\drivers/classpnp.sys and then just sitting there. Different Internet stations, it would appear that there is no definitive answer to this problem. It is recommended to recharge using recovery disks or hidden image.

  I can't access the user manual as it is on the laptop so I've referenced various positions on the internet. I had created for repair and recovery disks when I bought the laptop and so on to different positions, I started my system with the repair disk and the process began.

  Unfortunately, the screens that appeared were different from those in positions and as I don't have access to a manual, I don't know if I'm following the correct procedure.

  Can someone provide me with a PDF for a C660 laptop user manual - 2 EV?

  If someone can advise me how to reload Windows 7?

  Thank you in advance.

  S user guides document can be downloaded from http://www.toshiba.eu/innovation/download_manuals.jsp
  Anyway, if you created the recovery disc please start your laptop and press f12 to get into the boot menu. When menu of startup appears on-screen set recovery disc 1 into the optical disk drive and choose the CD/DVD device as a boot device and press ENTER.

  Installation should start. What you need to do is just follow the menu on the screen. It should be similar as sown on http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm

  If you have any other questions or if you need help let us know.

• My computer has crashed with BSOD - I have miniDump file link

  Sony Vaio

  Windows 7
  Intel Core 2 Duo T6600 CPU 2.20 GHz
  4 GB OF RAM
  Crucial SSD - M4-ct128m4ssd2cca
  Norton
  My computer went to bsod last week - tried cleaning registry and dskchk and pilot - I went through the drivers and found one in need of an update - update has been blocked by norton.  No problem for a while, then was crushed this evening - also previous accidents create minidump files - but this one did - here's the link (((CORRECTED)))
  https://SkyDrive.live.com/redir?RESID=B19C18E006620FEE! 109 & authkey =! AGMr2-pOWW1-sR8&ithint=file%2c.zip
  Thank you

  Hello

  The attached file of the DMP is (7A) KERNEL_DATA_INPAGE_ERROR bug check.

  This bug check indicates that the data page of the kernel of the required paging file cannot be read into memory.

  Error checking 7 a, {fffff6fc40007f08, ffffffffc000000e, 4c4f8860, fffff88000fe1630}

  The 2nd parameter of the bug check is 0xc000000e = DISK_HARDWARE_ERROR: there is error with hardware disk.

  0xC000000E or STATUS_NO_SUCH_DEVICE, usually indicates a hardware failure or an incorrect drive configuration. Check your cables and check the disk with the available from the manufacturer of your drive diagnostic utility. If you use old PATA (IDE) disks, this status code may indicate a bad master/subordinate drive configuration.

  It is also possible that a driver is causing corruption.

  -----------------

  1. uninstall ArcSoft Magic - i Visual effect.

  2 remove and replace Norton with Microsoft Security Essentials for purposes of troubleshooting temporary, as it is probably cause conflicts:

  Removal of Norton- https://support.Norton.com/SP/en/us/home/current/solutions/kb20080710133834EN_EndUserProfile_en_us;JSESSIONID=841A6D40BA6872C47697C6C6B19C8E11.4?entsrc=redirect_pubweb&PVID=f-home

  MSE - http://Windows.Microsoft.com/en-us/Windows/Security-Essentials-download 

  3. SFEP.sys - Fri Aug 03 01:35:53 2007

  ^^ Sony Firmware Extension parser - 2007 pilot version has problems BSOD in Win7 (yours is 2007).

  Update ASAP - http://esupport.sony.com/perl/select-system.pl

  4 uninstall InterVideo, it seems to be linked to Corel - http://www.corel.com/corel/pages/index.jsp?pgid=800034

  If you still crash after all the foregoing, we probably hard drive failure which we will then move on diagnostics.

  Kind regards

  Patrick

• Satellite Pro A300 crashes with white screen

  I have a Satellite Pro A300, AMD processor, Vista, ATI graphics card.

  The system worked fine for a year, but there are a few months, he started crashing, the screen went white, not blue, whatever it be running, like music, stopped. This can occur after several hours or minutes, or even if he is re-start. All my software is up-to-date, Microsoft and Toshiba. I rebuilt my system from scratch and the symptoms came back.

  At first I thought that this could be a heat problem, but I followed this but I don't think that's it. It crashed seconds after leaving standby mode when it has not had a chance to warm up.

  Anyone have any ideas?

  Simon

  Hey Buddy,

  Theoretically, it might be an overheating problem so the screen became due white built in overheating protection...

  You should try to clean your laptop using a jet of compressed air. This could blow the dust of fans cooling and, therefore, it of not necessary to disassemble the laptop.

  In your case, I recommend reading this article:

• What Windows 7 64-bit installation crashes with BSOD when you ask to Raid driver

  Original title: HP dv7 7008 own ssd install question.

  While he was trying to do a clean install of Windows 7 64 bit Ultimate built in 32gig ssd blocks on a 7B BSOD.  Tried to re - install the driver iastor.sys, intel RAID ultilty without success.

  I tried to restore to the factory but can't.  Can boot from image of Windows 7 on USB and try to re - install.  Installation asks for the driver that I provided and about 30 seconds later it BSOD.

  HP uses a 32gig like Accelerator HD SSD where the problem with the iastor.sys.  There is no option in the BIOS to what whatever relevant and I am at a loss.

  Don't want to send it back under warranty.

  Turned out to be a bad SSD returned and replaced with new ones.  Just glad to know I wasn't losing my mind.

• Acronis restored Windows XP crashes with BSOD on startup

  I tried to restore an image of Windows XP Pro created with Acronis True Image Home on a virtual machine VMWare, using VMWare Player.  When I try to boot the system I momentarily get a screen blue, followed by a never-ending cycle of reboots.  The same phenomenon occurs in Mode without failure.  I used to be able to restore it but we have migrated the installation of a modern system of Levono and is no longer possible to restore on a virtual machine.  I guess that there is a problem with the drivers HD in the new system.

  Does anyone have any suggestions?  Here's my .vmx file:

  . Encoding = "windows-1252".
  config.version = '8 '.
  virtualHW.version = '8 '.
  scsi0. Present = 'TRUE '.
  memsize = "2048".
  IDE1:0. Present = 'TRUE '.
  IDE1:0. FileName = 'E: '.
  IDE1:0. DeviceType = "cdrom-raw"
  floppy0.filetype = 'file '.
  floppy0. FileName = "autoinst.flp".
  floppy0.clientDevice = "FALSE".
  ethernet0. Present = 'TRUE '.
  ethernet0. ConnectionType = "nat".
  ethernet0.wakeOnPcktRcv = "FALSE".
  ethernet0. AddressType = 'generated '.
  USB. Present = 'TRUE '.
  EHCI. Present = 'TRUE '.
  Sound.Present = 'TRUE '.
  sound.fileName = "-1".
  Sound.AutoDetect = "TRUE".
  MKS. Enable3D = 'TRUE '.
  Serial0.present = 'TRUE '.
  Serial0.FileType = "thinprint".
  pciBridge0.present = 'TRUE '.
  pciBridge4.present = 'TRUE '.
  pciBridge4.virtualDev = "pcieRootPort"
  pciBridge4.functions = '8 '.
  pciBridge5.present = 'TRUE '.
  pciBridge5.virtualDev = "pcieRootPort"
  pciBridge5.functions = '8 '.
  pciBridge6.present = 'TRUE '.
  pciBridge6.virtualDev = "pcieRootPort"
  pciBridge6.functions = '8 '.
  pciBridge7.present = 'TRUE '.
  pciBridge7.virtualDev = "pcieRootPort"
  pciBridge7.functions = '8 '.
  vmci0. Present = 'TRUE '.
  hpet0. Present = 'TRUE '.
  usb.vbluetooth.startConnected = "FALSE".
  buslogic.noDriver = "FALSE".
  displayName = "XP Server"
  guestOS = "winxppro.
  NVRAM = "Server.nvram XP.
  virtualHW.productCompatibility = "hosted".
  gui.exitOnCLIHLT = "FALSE".
  easyInstall.keepFloppy = 'TRUE '.
  powerType.powerOff = "hard."
  powerType.powerOn = "hard."
  powerType.suspend = "hard."
  powerType.reset = "hard."
  extendedConfigFile = "XP Server.vmxf"
  ethernet0.generatedAddress = "00: 0C: 29:84:88:4f.
  vmci0.ID = "1099204687".
  UUID. Location = "56 4 d 12 ee f6 60 70 7 b - 1e a9 4 c 41 84 88 4f d2".
  UUID. BIOS = "56 4 d 12 ee f6 60 70 7 b - 1e a9 4 c 41 84 88 4f d2".
  cleanShutdown = 'TRUE '.
  Replay.Supported = "FALSE".
  Replay.FileName = «»
  usb.autoConnect.device0 = ' path: 1/1/0/3 autoclean: 1.
  pciBridge0.pciSlotNumber = "17".
  pciBridge4.pciSlotNumber = "21".
  pciBridge5.pciSlotNumber = "22".
  pciBridge6.pciSlotNumber = "23".
  pciBridge7.pciSlotNumber = "24".
  scsi0.pciSlotNumber = "16".
  usb.pciSlotNumber = "32".
  ethernet0.pciSlotNumber = "33".
  sound.pciSlotNumber = "34".
  ehci.pciSlotNumber = "35".
  vmci0.pciSlotNumber = '36 '.
  USB:1.present = 'TRUE '.
  ethernet0.generatedAddressOffset = '0 '.
  tools.remindInstall = 'TRUE '.
  vmotion.checkpointFBSize = "134217728.
  USB:1.speed = '2 '.
  USB:1.DeviceType = "hub".
  USB:1.port = "1".
  USB:1.parent = "-1".
  IDE1:0.startConnected = 'TRUE '.
  USB. Generic.AutoConnect = "FALSE".
  SCSI1. Present = 'TRUE '.
  SCSI1:0. Present = 'TRUE '.
  SCSI1:0. FileName = 'Server.vmdk of XP.
  SCSI1:0. Redo = «»
  SCSI1.pciSlotNumber = "37".
  scsi0:0. Present = "FALSE".
  USB:0. Present = 'TRUE '.
  USB:0. DeviceType = 'hidden '.
  USB:0.port = "0".
  USB:0.parent = "-1".

  I tried to install the converter VCentre - but it only supports older versions of Acronis.

  This is unfortunately true. However, if you first restore the image to a virtual disk using Acronis and then run VMware Converter using the option 'Configure the Machine', the converter must inject the proper drivers.

  André

• BSOD on Satellite L850

  Hi guys,.
  I'm having these BSOD with bug check code "DRIVER_POWER_STATE_FAILURE", I tried to update my BIOS and other pilots, but the guys at Microsoft say that I need to update my driver of power, but I can't find them in
  "toshiba - tro.de.
  My specs are:
  Toshiba Satellite L850 - B452 (PSKG8V) with Intel core i7-3630QM.
  This is one of the mini dumps, the rest are in this zip file:
  https://www.mediafire.com/?qhvafd91r34awzx
  ==================================================
  Dump file: 042614-58609 - 01.dmp
  Crash time: 26/04/2014 11:39:18
  Bug Check String: DRIVER_POWER_STATE_FAILURE
  Bug check code: 0x0000009f
  Parameter 1: 00000000'00000003
  Parameter 2: ffffe001'eff448e0
  Parameter 3: fffff801'61193930
  Parameter 4: ffffe001'dbff9550
  Caused by the driver: ntoskrnl.exe
  Caused by the address: ntoskrnl.exe + 153fa0
  File description: NT kernel & system
  Product name: Microsoft® Windows® Operating System
  Company: Microsoft Corporation
  File version: 6.3.9600.17041 (winblue_gdr.140305 - 1710)
  CPU: x 64
  Plant address: ntoskrnl.exe + 153fa0
  Stack address 1:
  The stack address 2:
  Address 3 the battery:
  Computer name:
  Full path: C:\WINDOWS\Minidump\042614-58609-01.dmp
  Number of processors: 8
  Main version: 15
  Minor Version: 9600
  Size of the dump file: 251 790
  Dump of file time: 26/04/2014 11:40:17
  ==================================================

  Hello

  All the drivers for your model mobile, you can find on http://www.toshibamea.com/en/Download-Files

  Your model of PSKG8V is in the list. Maybe this silly now, but I do not know what is the conductor of electricity. If your laptop comes with original preinstalled OS I recommend you set the BIOS to default settings and install original recovery image.
  After doing this, you can test the functionality with the factory settings.

  Post comments please.

• Satellite L20 error: DVD - RAM crashes with a blue screen with the use of cd-audio

  Hello world

  I have a very annoying problem: when I use audio-cd, my Satellite tends to crash with a blue screen. When it crashes, blue screen, scrolls and immediately a black screen and a restart follows.

  It is probably a driver problem, because I have three audioprograms installed (Windows Media player, Sonic Stage MiniDisc and I-tunes).

  Can someone give me advice? Thanks in advance

  Klaas

  Hi Klaas,

  It would be useful to know what the error message is when you get the blue screen. I suggest that you disable the restart automatic installation so that your laptop stops on the blue screen and you can read the error.

  To disable the auto restart: -.

  1. right click on 'My computer' icon and then click on "Properties".
  2. click on the "Advanced" tab
  3. click on 'Settings' in the section starting and recovering (towards the bottom of the window).
  4 uncheck 'automatically restart '.

  Please post again all the details of the blue screen error message.

  concerning

• Satellite L850-1V5 AMD RADEON HD M 7670 - no display on external monitor

  Hello.

  I'm having a strange problem with my Satellite L850-1V5 new with card in order to 7670M AMD RADEON HD.
  (It runs windows 8 64-bit family)

  At the beginning I couldn't open the CCC.
  So I uninstalled the program and reinstalled the drivers I found here, on the Web at Toshiba Europe site.
  Now it works well.
  But now I have another problem.

  First, I tried to extend/duplicate(whatever, it does not really matter) my workstation via the VGA port.
  In CTC, I could see that he acknowledged my external monitor model and even the mouse cursor has acted as the Office has been extended.

  BUT
  1. it has no image on the external monitor
  2. on the input of the external display Menu(:where one chooses the port to be used, i.e. VGA, HDMI, SCART, DVI etc etc) VGA port c o u l d NOT be selected, as if there were no cable on the external monitor

  Then I tried an HDMI cable with the same result, with the difference that on the external screen menu entry the HDMI port c o u l d be selected, as if it were a cable on the external monitor, but the monitor says "no signal".

  I tried the same steps via Windows Control Panel (menu Display).

  Same results...

  I tried on 2 different external monitors (the two LG ones, even if we're about 3 years older than the other, so I guess he should have nothing to do with the monitor).

  Any ideas?
  Is this a hardware problem, a software problem? Toshiba Service go?

  Post edited by: L850

  Hello

  To my knowledge, use the keyboard shortcut to switch to an external monitor.
  AFAIK the F4 (or Fn + F4) changes the output display.

  Have you tried using this button?