Administrative event viewer

while trying to figure out why my system suddenly takes a very notable longer amount of time to connect to the internet, I came across "Event Viewer". I am far from an expert. I clicked on Administrative event viewer. It shows more 9 000 errors of today. Again, I know just enough about the computer system, to screw it up, to try something that I know nothing. Can I get help from this site?

I would not consider 9 000 errors in a normal day, but I'm not an MVP.

My system of each power on/off cycle I have 3 errors and 2 warnings (warnings and errors are not the same) and they are the same each time:

Since I looked into errors, I know they come from attempts by the system to obtain a network address when other things on the system are not quite ready yet (since the system is still to come and not quite 'ready').  Then, repeat these steps and when everything is ready the system managed to obtain a network address and everything is good for the rest of the day - no more errors or warnings for the entire day.  The warnings are when the system shuts down and the Services are stopped.  There is probably not much I can do to 'fix' people, but since I understand what they mean, and I did more during the day, they cover not me - I know what they mean.

No event in the Event Viewer log must defy explanation and it is possible that some of them could be ignored.  I have that 3 673 administrative events for the last 7 months (lots and lots and lots of reboots) and you have 9000 per day and don't think it's an indication that something might not be quite right?

I don't see how someone can say that your event can be ignored without knowing what they are unless you are just in the habit of ignoring the events.  I wouldn't be able to stand or to tolerate 9000 events in one day.

You have learned that unchecking the yellow displayed in Autoruns "File not found" is not your system run faster.  Since these are just references to a path/file/folder on your system that doesn't exist more there is nothing for them to do, nothing going to happen which can consume any time.  And you can see them again the next time you reboot your system.

Pink/red Autoruns entries are usually things with third party programs that the Publisher didn't bother sign digitally... Description and the editor fields are often empty - probably not a problem.

For start-up problems, the best place to watch in Autoruns is the tab connection since that is where will be your startup items and from there you can methodically clear things, restart your system and see what things look like:

If your system is simply slow start and then runs properly the rest of the time you should watch all your startup items and chances are very good that there are many things that can be disabled - at least to test.

I'll be sure to do a system restore point (for security) before you make permanent changes so in case things get worse, you can undo the changes and start over with your troubleshooting.

Some people like to use the built in the msconfig program to see what that their startup items, and clear that they do not have.

Here's what looks like on my system msconfig Startup tab:

I have no startup items to worry, but you have some people who need/want and no one can tell you what you might be able to remove without seeing a list.

I'm not a Microsoft MVP, but I'm still 9 administrative errors event someday I'd find them, come with an explanation to know what they mean and making an effort to fix them if I could.

I wouldn't consider 9000, tens of thousands or millions of errors a day somehow to be normal.

Tags: Windows

Similar Questions

  • Why is there a warning and error in administrative events in Event Viewer?

    When I open the event viewer, and then the chip on the custom view and then double-click Administrative events there are warnings and errors in this case why that is and what I need to fix it or leave it alone.

    [Moved from comments]

    Please provide us with your administrative Event Viewer logs by following these steps:

    Click on Start Menu
    Type eventvwr in the find programs and files (do not hit enter)
    Click with the right button on eventvwr.exe and click Run as administrator
    Expand custom views
    Click the administrative events
    Right-click Administrative events
    Record all events in custom view as...
    Save them to a folder where you will remember which folder and save it as Errors.evtx
    Go where you saved Errors.evtx
    Make a right click Errors.evtx-> send to compressed (zipped) folder of->
    Download .zip here (if you can) to skydrive or a file sharing service

  • DESELECT THE ADMINISTRATIVE EVENTS IN EVENT VIEWER

    HOW CAN I CLEAR THE ADMINISTRATIVE EVENTS IN EVENT VIEWER

    The category of administrative events is just an aggregate of all the events.

    If you are wanting to clear the administrative events, you will need to go to each subcategory of Windows logs, and then right-click and select 'Clear log'.  If it asks you to save the log, just click again on 'clear log '.

    Once you have done this for all categories, then you will be able to see that there is nothing in the administrative events.

  • Event Viewer service is missing from the Administrative Tools Services

    I have a problem with the right click on my C: drive in the browser to access the Properties submenu. The computer freezes and I have to use the Task Manager to restart windows Explorer. I can click rt any other file in Explorer without problem. I tried to check the event viewer to see if I could find a clue to what is wrong, but I found that the event viewer service is not yet present in respect of the services. I get this error under custom views/administrative events: "Event Viewer cannot open the event log or custom view to verify that the event log service is running the specified query is invalid 15001" two events may be related to I don't know. . I tried Shellextensionview but that has not helped the blocking problem. The computer is fully patched with NIS 2011.running. Scan of Malwarebytes does not show anything. Can you help me? Thank you

    Hello

    Follow the steps in the article mentioned below and check if this solves the problem.


    Error message when you use Event Viewer to open a log of events on a Windows Server 2008-based computer or a Windows Vista: "Event Viewer cannot open the event log or custom view.
    http://support.Microsoft.com/kb/972999

    See also:
    http://TechNet.Microsoft.com/en-us/library/cc765971.aspx

  • How to clear the administrative events - Event Viewer log

    Hello:

    Anyone know how to clear the administrative events log listed under custom in the event viewer views?

    All the logs listed in Windows logs do not have options to clear, but the back above.

    Thank you

    ColTom2

    Hey Colonel,

    It is because this isn't 'really' a newspaper, in itself.
    This is a Search of the newspaper (and there is MUCH more that most people know), filtered to show all events in administrative type.
    The source column shows you which newspaper it came from originally.

    To get rid of them, you will need to erase all records.

    If you want to get an idea:
    Go down to the Applications and Services logs, and expand.
    Microsoft, expand it.
    Then Windows.

    Nice list?
    You need to open and delete all. To really delete it.
    VP Tech Services

  • Error in Event Viewer: loading libraries of dynamic links customized for each application. The system administrator should review the list of libraries

    My system features, i7 thinkpad w540, 16 GB of ram and a 256 GB ssd. Using MSE as av with AMBM pro

    whenever I start my system, win 7 x 64, I get the following error in the event viewer:

    Custom dynamic link libraries are loaded for each application. The system administrator should review the list of libraries to ensure that they are linked to trusted applications.

    any help with this error?

    Atul

    Description: NVIDIA shim dll initialization

    Product: Shim NVIDIA D3D drivers
    Company: NVIDIA Corporationhttp://systemexplorer.net/file-database/file/nvinit-dll/33069751

    I would not be concerned by this driver.

  • Event Viewer Windows 7 'Administrative events' can not clear the log? Why and is there a solution?

    Window 7 has many error logs in the "Event Viewer", but all seem to have the ability to "Clear log" except the Administration? Why? I looked at some of the entries, and they you are referencing my "security cameras" this automatic restart after a power/Brown power. Yet I have not found a way to "clear a log this ' under 'Administrative events?' Is there a way to clean this newspaper? It's more than 1100 events, and none are major.

    Thank you

    Hank

    Hank

    Delete all log files, including the journal of the administrator combined, by running this command as an administrator file save it to the desktop and right click to run it. The link is here http://www.sevenforums.com/tutorials/25480-event-viewer-one-click-clear.html?ltr=E

  • When I click Start it has not run icon / box to enter. There is also no administrative tools to open the event viewer. How can I see what CHKDSK found?

    I received a message that my drive (c :) was corrupt. A ran CHKDSK, now what? Time to restart ATi appeared on my control panel. What is c?

    Use the search box of start instead of run.

    Start > in the search box, type event viewer > Enter >
    the column on the left, click on the pointer before Windows logs
    Select (left-click) Applications
    Click with the right button on Applications
    Select search
    in the search box, type chkdsk
    Click next
    leave the search window
    the middle column, the top, you will see listed Wininit 1001
    right column, under the event 1001, Wininit, click Properties of the event
    A new window with the diskcheck newspaper.
    You can use the slider to display, or click the button copy and then paste it to the one that you want to use.

  • How can I remove all the errors and warnings Event Viewer administrative events, Application & system options?

    Please I need to remove these errors and warnings permanently on my computers?
    And please tell all the ways to get rid of these errors and warnings in Event Viewer... I'm waiting...

    You can clear the logs in the event viewer by going to the various sections, right-click and selecting "clear logs.

    What you can't do, is remove the event viewer or stop newspapers appearing again. It is part of the Windows 7 kernel and is useful to diagnose errors...

  • Event Viewer: the initializer for type for 'advancedsetttings' threw an exception

    I get an error "the initializer for type for 'advancedsetttings' threw an exception" when trying to view the subscriptions in the event viewer.  The machine is a windows 2008 server.  It worked before but just stoped working.  I tried loging in as a local administrator on the machine account and has not worked.  Also, it does work with an account that is a domain administrator.  That everyone knows, or knows how to solve this problem?

    Thank you.  With the help of the question please repost the question in Forum Windows Server

    http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home

  • Event Viewer

    I know there is something in the computer named event viewer that shows all the areas of the possible problem in the computer - but I do not know how to access.  Can you help me?

    Hello

    Click Start---> Panel---> administration tools--->Event Viewer.

    Good luck.

  • What are the themes common to monitor the event viewer?

    General Administration, I would like to know what common elements are usually to monitor event viewer.

    Would be verification "error or warning" Application and system be enough?

    Does anyone have any suggestions?

    Thanks in advance for your suggestions

    Hello

    Event Viewer follows the Windows Firewall and other security-related applications.

  • Microsoft.VC80.CRT error in Event Viewer

    When checking through the event viewer, I noticed a few errors. This one for the VC80. CRT is shown repeatedly. I'm not sure what may be the cause when it was recorded. I wonder if some missing critical updates can be a cause of those who have been downloaded and installed. They are 2656368, 2656369, 2656370. In fact I think that errors can be the result of a webcam software that has been installed and did not work properly. There are a bunch of sidebyside errors and all other Referances one webcam program.

    Did you ever have a password?

    As a user or administrative password?

    You know the password?

    You should be able to right click the program and select Properties, then select the Security tab, under permissions choose Add, the next box choose Advanced, choose Find now to locate the service you want to add and ok your way out, apply at the end, and then click ok.

    If above does not work to clear the error, you will need to uninstall the software and reinstall.

  • Question about consistent errors in the event viewer XP Home Edition

    I ran a program called VEW looking errors up to twenty in the XP Event Viewer.

    Here is the data for the analysis of files:

    V01c Vino event viewer run on Windows XP in English
    Report run at 28/01/2012 23:42:23

    Note: All dates below are in the format dd/mm/yyyy

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    "System" Log - error Type
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Journal: "System" Date/time: 01/28/2012 22:48:06
    Type: error category: 0
    Event: 10005 Source: DCOM
    DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

    Journal: "System" Date/time: 01/28/2012 22:47:40
    Type: error category: 0
    Event: 7023 Source: Service Control Manager
    Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

    Journal: "System" Date/time: 01/28/2012 22:35:31
    Type: error category: 0
    Event: 7023 Source: Service Control Manager
    Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

    Journal: "System" Date/time: 27/01/2012-22:49:54
    Type: error category: 0
    Event: 10005 Source: DCOM
    DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

    Journal: "System" Date/time: 27/01/2012-22:37:21
    Type: error category: 0
    Event: 7023 Source: Service Control Manager
    Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

    Journal: "System" Date/time: 27/01/2012-14:32:57
    Type: error category: 0
    Event: 7023 Source: Service Control Manager
    Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

    Journal: "System" Date/time: 27/01/2012 03:38:23
    Type: error category: 0
    Event: 7023 Source: Service Control Manager
    Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

    Journal: "System" Date/time: 25/01/2012-13:53:36
    Type: error category: 0
    Event: 10005 Source: DCOM
    DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

    Journal: "System" Date/time: 25/01/2012-13:32:34
    Type: error category: 0
    Event: 7023 Source: Service Control Manager
    Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

    Journal: "System" Date/time: 24/01/2012 23:35:59
    Type: error category: 0
    Event: 10005 Source: DCOM
    DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

    Journal: "System" Date/time: 24/01/2012 23:21:10
    Type: error category: 0
    Event: 29 Source: W32Time
    The time provider NtpClient is configured to acquire time from one or more time sources, however none of the sources are currently accessible.  No attempt to contact a source will be for 14 minutes. NtpClient has no source of accurate time.

    Journal: "System" Date/time: 24/01/2012 23:21:10
    Type: error category: 0
    Event: 17 Source: W32Time
    Time provider NtpClient: an error has occurred during the DNS lookup of the manually configured peer 'time.nist.gov, 0x1 '. NtpClient will try the DNS lookup in 15 minutes. The error was: a socket operation was attempted to an unreachable host. (0 x 80072751)

    Journal: "System" Date/time: 24/01/2012 23:18:36
    Type: error category: 0
    Event: 7023 Source: Service Control Manager
    Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

    Journal: "System" Date/time: 24/01/2012 02:15:46
    Type: error category: 0
    Event: 7023 Source: Service Control Manager
    Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

    Journal: "System" Date/time: 24/01/2012-12:58:29 AM
    Type: error category: 0
    Event: 10005 Source: DCOM
    DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

    Journal: "System" Date/time: 24/01/2012 00 h delighteth
    Type: error category: 0
    Event: 7023 Source: Service Control Manager
    Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

    Journal: 'System' time: 23/01/2012 23:26:32
    Type: error category: 0
    Event: 7023 Source: Service Control Manager
    Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

    Journal: 'System' time: 23/01/2012 23:26:19
    Type: error category: 0
    Event: 10005 Source: DCOM
    DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

    Journal: 'System' time: 23/01/2012 23:02:41
    Type: error category: 0
    Event: 10005 Source: DCOM
    DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

    Journal: 'System' time: 23/01/2012 18:28:49
    Type: error category: 0
    Event: 7023 Source: Service Control Manager
    Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

    Journal: "System" Date/time: 24/01/2012 23:35:59

    Parameters of scanning has been:

    • System
    • Errors
    • 1-20 errors, valued at twenty.

    What are these errors and they are nothing to worry about?

    I have Nero 8 on this system and have an updated hosts file the running here: http://winhelp2002.mvps.org/hosts.htm

    Not sure, but I may have changed a network setting to activate the new hosts file work properly.

    Seen these errors for a while. system works well and smoothly.  No symptoms of malware or infection seen or found.  I would call these software errors as they seem does not affect the operation of the system.

    XP Home Edition SP3 P4 2.8 2 GB RAM

    Joe

    Oh yes :)

    I have never used the program VEW and don't think I will check it - I just look at the Event Viewer logs the old-fashioned way (manually) if I think that there is a problem, but that might just be the old me.

    It is true that XP Home doesn't have Group Policy Editor, but all policy settings are always available via the registry.

    Some malware will change your GP settings and cause problems.

    I have a little import registry will correct all the ones I know, so if someone has these symptoms, any flavor of XP, they are running, I'll just send the script because sometimes you will be not able to solve the problem, even if you have not the GP Editor.

    The registry always import work - and work well for XP Home or XP Pro.  If you have the symptoms and XP Home, what would you?   Start the import operation of the registry.

    If you're curious, off on my SkyDrive it is a spreadsheet Excel (Group Policy settings) who has all the parameters of GP and where they are in the registry.  I do not recommend start searching, but it is useful to know where things are if there is a problem.

    I would not allow the connection of a security XP stuff unless you think you're being attacked.  More and verbose logging slows things down.  My Event Viewer Security log is empty.

    Find the links to the Microsoft Support Engineer for the most part useless to actually solve a problem (because it help you with your problem), if someone has a question or point of Event Viewer, I usually just send them this:

    To view the logs in Event Viewer, click Start, settings, Control Panel, administrative tools, event viewer.

    A shortcut to the event viewer is to click on start, run and enter in the box:

    %SystemRoot%\system32\eventvwr.msc

    Click OK to launch the event viewer.

    The most interesting newspapers are usually the system and Application logs.

    Some newspapers such as security and Internet Explorer may be completely empty or have just a few items.  The default settings for XP wants do not connect all this activity, unless you need to solve a problem in these areas.  If you enable logging for them the papers fill up quickly and could adversely affect the performance of your system with all the extras (often unnecessary) activity.

    If you have Microsoft Office installed, it has its own newspapers, and they can be empty or occasional boring activity very little or, if there is no problem with your desktop applications.  It's normal.

    Not every event is a problem, some are informational messages that things work very well, and some are warnings.

    However, no event should defy reasonable explanation.

    Each event is sorted by Date and time.  Errors will be red Xs, warnings will have yellow! s.
    Informational messages have white is.  Not every error or warning event means that there is a serious question.

    Some are excusable at boot time when Windows starts.  Try to find only the events to the date and time around your problem.

    If you double-click on an event, it will open a window of properties with more information.  On the right are black up and down arrow keys to scroll through the open events. The third button that looks like two overlapping pages is used to copy the details of the event in your Windows Clipboard.

    When you find an interesting event that occurred at the time of your question, click on the third button at the top and arrows to copy the details and then you can paste the details (right click, paste or CTRL-V) the text in detail here for analysis.  Remove all personal information from your information after you paste If you are forced to do so.

    If you paste an event, it will look something like this annoying system startup event:

    Event type: Information
    Event source: Service Control Manager
    Event category: no
    Event ID: 7035
    Date: 14/07/2010
    Time: 17:54:18
    User: Jose
    Computer: computer

    Description:
    The Remote Access Connection Manager service was sent successfully a starting control.

    To get a fresh start on any log of the event viewer, you can choose to clear the log (the log backup is available), and then reproduce your problem, then just look at the events around your show and troubleshoot events that are happening when you have your question.

    You can search for events on the World Wide Web and get ideas.  It's where people events they see and then to the top of their questions, ideas and solutions:

    http://www.EventID.NET/

    If you find your event in the discussion, the first idea or discussion does not necessarily mean it is the "answer" to your situation, so read through all the ideas to find the one that sounds more like your situation.

  • Error in Event Viewer and warning messages.

    original title: ERROR EVENT VIEWER AND warning MESSAGES

    My computer is running Windows XP Media Center Edition and if I click on the PANEL, performance and Maintenance, administrative tools, event viewer and select Application and/or system I see RED around the icons who say ERROR and yellow triangular icons who say WARNNING. This condition is a problem and what is the origin of the messages must be generated?

    Hi SamRyan,

    See this article which should give you more details on the event viewer.

    Procedure to view and manage event logs in Event Viewer in Windows XP

    See also:

    Microsoft Windows XP - using Event Viewer

Maybe you are looking for

  • 693 error and POP record 11700 in the sidebar?

    I recently reinstalled win 7 OS on my computer and my emails were slow to send lately, I noticed that he sends two copies in the sent folder? Also a folder named POP appeared on the side panel since Ive done the re - install? I removed it but it came

  • I can't find Vista graphics driver for Tecra A3X

    Hi all! Recently, I installed Windows vista and I have just one problem.Need drivers for the VGA card. Please, I can't find any driver that makes my TecraA3x works well. Tell me where and how I can download this driver for vista.

  • What is the precision used by DIAdem during the integration?

    Hello I have been using DIAdem to perform digital integrations of force with respect to displacement and pressure with regard to travel (all acquired signals). These calculations are needed to determine the actuation and energy output associated with

  • get another administrator account.

    How can I remove my administrator account or remove my existing password?

  • Can't erase memory, office pro 8100 jet network info

    I have an Officejet Pro 8100 using windows 7 and have used the printer sucessfully for months. Connected to a Netgear router.  I changed my router ID and password to make them safer. Now, the printer does not recover. I used the installation software